IOS devices not connecting

I just set up an airport express, first version, and it is working fine with my macbook pro but won't connect to my iPhone 4S or my iPad (1). When I put in the password on both devices it just spins. The airport setup utility (6.1) sees them and gives me strong connection info.
Any idea why the iOS devices aren't connecting?

Suggest that you temporarily turn off the wireless security on the Express and see if the mobile devices will connect that way.
If they will, then you know that they can connect using the wireless signal....so there is a security issue at play. Try using WPA/WPA2 Personal on the AirPort Express for wireless security if you have not already done that.
If the mobile devices will not connect when the network is using no security, then I am out of ideas....other than completely restoring the mobile devices.
I would not do this until I received confirmation from the iPhone or iPad experts in those respective support areas. They may have some additional ideas for you regarding the mobile devices. Good luck.
Using iPhone
Using iPad

Similar Messages

TS4062 My iOS devices not connecting to iTunes

I have an iPhone 5 with iOS 7.1, iPod touch 4 with iOS 6.1.6 and first generation of iPad with iOS 5.1.1. All are fully updated. I keep this up to date at all times. I am using iTunes 11.1.5.5. I have had nothing but problems with iTunes connecting to them via wifi. I have tried over and over to get them working as they SHOULD for a few years now. I have gotten them to all connect a few times but then they will stop connecting again. I have tried over and over to remedy this and to be honest I'm sick of it. I am about to stop using iOS devices due to this. Anyone have any ideas how to remedy this?

I'll assume NAT is in use here.
Are your iOS devices using the same DHCP server, same network, same DNS server, and the same settings as your OS X systems? Do you have references to any other DNS servers in use here, or are all your systems using only your own local DNS server, with no references to other ISP or Google or off-network DNS servers?
Do your iOS devices have the necessary certificates loaded?   (Loading the certificates first, then the entitlements, is typical.)
Using .local is not something you want to tangle with here.
I'm going to assume you're obfuscating your domain here, as it's not likely you're using the (real and registered) domain "mydomain.net" here.   I'll also assume your local DNS is not using .local or .arpa as the domain name. (If you're obfuscating, please consider using example.com, example.org or example.net, as these are reserved for this and similar uses.)

IOS devices not connecting to Internet while MacBooks does

Hi,
I'm in the process of closing my Verizon Internet and testing a Comcast service. Before unplugging my Time Capsule from the Verizon adsl modem I made sure that all worked ok with the Comcast cable connection. My MacBook worked right away through Ethernet and so it did through wifi when plugging the TC to the Comcast modem. The problem came on our iOS devices, 2 iPhones and 2 iPads, as they did recognize the network but could not connect to Internet.
I called Comcast customer care but as expected they wash their hands as I have Internet on my computer...
Any advise? Is there something else I need to activate?
Thanks
Pablo

Change the names to short no spaces no special characters. For wireless and the TC.
Lock the wireless to on a/n - b/g
Then fix the channel for 2.4ghz.. 1, 6, 11
Those measures usually get the iphone working .. ipad should work also.

HT1296 i am trying to load my iphone3 via my computer, but it gives a message that device not connected, when it is clearly showing on the control panel

i am trying to load my iphone3 via my computer, but it gives a message that device not connected, when it is clearly showing on the control panel

Hi glomp,
From the information provided, it sounds like your device may not be fully recognized by iTunes. Here are two articles (depending on your computer's operating system) for troubleshooting this:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Have a good one,
- Ari

Devices not connecting to Afaria

I have been having a problem the last couple days of devices not connecting to Afaria. Afaria can connect to the devices to send policies but the devices cannot connect back. When trying to enroll, the app displays "Downloading enrollment data" followed by "enrollment failed" and when refreshing the connecting "Verifying device status" is displayed followed by "Connection failed." I have searched the knowledge base for an answer and rebooted both the Afaria server and Relay Server without success. Can anyone point me in the direction I should look at?

Try un-enrolling the device and make sure the afaria client has administrator preveliges.
For iOS -> Settings -> General-> Afaria -> administrator preveliges.
Also check if the latest profiles are installed on your iOS device.
For android follow the same steps
Settings -> Applications -> Afaria -> Admin preveliges.
If this does not work, try generating a new code and try enrolling the device back:
Steps are shown here:
http://frontline.sybase.com/support/documents.aspx
Check for document on "Client Enrollment"
Regards

TS1538 iOS: Device not recognized in iTunes for Windows doesn't fix my issue

I followed the instructions in this link but it has not fixed my problem. After I have done the screenshots and go into the device manager, my iphone is still not recognized in any of the devices. Any suggestions?

Hey there andrijfrommississauga,
I have an article here for you that will help you troubleshoot this issue with iTunes not recognizing your iOS devices:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks for coming to the Apple Support Communities!
Regards,
Braden

MuVo "device not connected" firmware update error

When I try to execute the plan given by Pook Kok Choy (below between "=====")
I successfully get MUVO_DRV_LB_00_04_250.exe installed.
When I move to step 2 I have the device attached to the PC but I get the message "device not connected to the USB port".
This happens, with the device connected and on while trying to install:
MUVOAudible_PCFW__40_2_L4.exe
Apparently, I am not alone in having this problem.
Apparently, this happens to others - using XP - specifically when trying to do this firmware upgrade in order to play purchased WMA, DRM protected music.
The PC recognizes the MuVo 28.
It assigns it a dri've letter when it is plugged in.
The install procedure for the *Audible* firmware does not see it.
Please help.
Tbanks,

JLRtist,
After you have installed the latest downloaded driver, did you run the player into recovery mode? Try this,press and hold the PLAY button, continue holding the button while inserting the player into the USB port for about 0-5 sec. Run the firmware update file.
Jason

Hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

Hello, give this a try...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

HP Photosmart C4795 Wireless Setup (Error Messege: Device Not Connected) Help?!?

I've had my HP Photosmart C4795 since 2009. I've haven't had any major issues with the printer until recently (probably time to get a new one).
This is my issue; the printer can't connect to my network. I'm able to print via USB from my Mac or PC. But I'd like to be able to print from any computer on my home network. In the past I've setup the printer to network with minor issue. I've had issues ever since the Mountain Lion Update (running version 10.8.3).
I've attempted to try once again to connect the printer to the network and I get an error message from my the HP Installer software (Device Not Connected). I've tried to troubleshoot the printer with no luck. These are solutions I've tried
1) Uninstalled HP Installer Software/Setup via Mac - I added the printer using the latested instructions provide from HP Supports section. I set up the printer but I can't it isn't showing up on any other computer.
2) WPS - My router (supplied by Comcast) couldn't find the printer. I used routers login website to connect the printer but it didn't work.
3) I've printed out the HP Network Configuration Page and manually add the printer's MAC Address to list on my router's devices list. I still can't connect wirelessly to the printer.
I've connected this printer wirelessly in the past before the Mountain Lion Update. Can anyone help?

First, on the printer go to Setup [Scan] > Wireless > Restore Defaults.
Then, set the printer up using WPS (pushbutton) - start it in the printer (Wireless menu) first, then the router within 2 minutes of starting it on the printer.
There is no HP software for 10.8, so you need to uninstall it. Uninstall the software using the 'scrubber' option:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall This IS the Scrubber Option, there is no button labeled "Scrubber"
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Now reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

IMac does't go into sleepmode, when an iOS-device is connected via usb

Hi! My iMac 27" isn't going in sleepmode, when an iOS-device is connected via usb for charging. "HandleUSBMuxDictionary client 0x101803420-iTunes/com.apple.iTunes using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21" is the entry that shows up in console.
Does anybody know, what that means and what I can do to get my sleepmode back?
Sorry for my english, I'm from germany.

Hi Dennis,
thx for your reply.
It would be a way to use a charger instead of the iMac (I already do so), but then I have to go two ways, one for syncing and one for charging. I don't think, that this was Apples intention. The ease of use is "a part" of their products and going these two ways instead of one can't be something Apple wants.
So I hope, that either there is another way or there will be an update for iTunes to fix this.
Once again thx.
Regards,
Stefan

Creative Zen Micro Firmware problem: "Device not connected, please connect your devi

After an exhausti've search, I've found the fix for losing your firmware and not being able to update it via download from the creative.com. To explain my problem, I had issues with my device connectivity, so I tried to option of reloadinging my firmware via Recovery Mode (option 3, 'Reload Firmware'). After selecting this option, I tried to download and update my firmware via the creative.com website. The module to update my firmware displayed the error message "Device not connected, please connect your device." After about 2 hours of trying various suggested fixes, I found a relati'vely easy fix by running together various suggestions I found for other problems. First rollback your Windows Media Player (WMP) via the instructions found on this page: http://www.auditmypc.com/uninstall-m...layer0beta.asp. Restart your computer after rolling back WMP.
When your compter restarts, insert the "playsforsure" CD labeled "Easy Start CD." Follow the directions for reinstalling WMP. After WMP is reinstalled, restart again. When the computer restarts, return to the CD and follow the directions in the prompt. Reconnect your device when prompted. Once you reconnect your device, it may not function right away. If this is the case, go to the 'Start' button, under 'Control Pannel,' select 'System.' Under 'System' select 'Hardware' and then 'Device Manager.' Find your portable device under 'Uni'versal Serial Bus controllers.' Click on your device and select 'Uninstall' from the small icons at the top of the window. When this is completed, unplug and plug your device back in. After this is done, click on 'Scan for hardware changes,' also a small icon at the top of the window. If your device had the problem mine did, it should now be recognized. Go back to the Creative website and download the latest firmware. The module should now find your player without any problems.
The only thing I can figure is that the "playsforsure Easy Start CD" must have a device driver that solves the problem that you can't find anywhere else. I hope this helps someone out there (tech support was telling me that I was going to have to ship my device back to the company I bought it from to get it exchanged...which would have taken at least a month, I'm sure). Good luck to you all.

For all of you non-technical Micro owners:
I found a fix for this that I hope will help others out.
When I want to Sync tracks to My Zen using Yahoo Jukebox or WMP, I simply reboot my machine with the device PLUGGED IN. After Windows starts up, my applications recognize that the Zen Micro is connected. Good Luck.

IOS devices not loading shared media library to the end

I am having this problem for some time by now - but it did not appear shortly after any iOS update! Now what is the trouble?
I am using my iPad 3 and my iPhone 5 (newest iOS on both) alongside an Apple TV 3, a Mac mini Server and a MacBook Pro (newest OS X). The Server hosts my media library, private sharing activated by using my Apple ID. Sometimes (not always) I am sharing my library with the same Apple ID on My MacBook Pro to my home network, too. Both Macs can see and use the other Mac's shared library without any troubles - so this works. The Apple TV 3 also can connect to both libraries (though I am using the Server's much more often than the MacBook Pro's).
Neither on my iPad nor on my iPhone I can get the home shared media library loaded in complete by using the apps
"Music" and "Video".
The small loading circle symbol just stops after about 50 % and then nothing happens furthermore no matter how long I am waiting:
The only thing I can do afterwards is to force quit "Music" and / or "Videos" app, restart those and trying again, still leaving me the already described 50 % and nothing else.
What is strange about that:
"Remote" app to Apple TV and my Macs and "AirPlay" to the Apple TV just work fine. "Remote" app connects to my Apple TV and my Macs without any troubles. But "Videos" and "Music" can not load the shared library to complete. It does not matter to which Mac I am connecting (to be more exact: to which shared library). All iOS devices "see" the shared libraries, seem to connect to them at the beginning but just to refuse to load more than 50 % - and doing anything else afterwards. To make it even more strange both iOS devices were able to load everything to the end some time ago. I am not sure if there was an iOS update available in between anymore, but there definetly was an iTunes update in between!
So what I already tried (not in that order described here):
Stopping and restarting home sharing on my Macs using the initial Apple ID account.
Stopping and restarting home sharing on both Macs using another Apple ID account (and adapting the iOS devices info accordingly).
Using different Apple ID accounts on both Macs at the same time for home sharing.
Logged off and re-logged back into iTunes Store Account on my Macs and iOS devices.
Re-configured my sharing on my iOS devices using those two already mentioned accounts.
Re-initialization of the complete iTunes libray on my Mac mini Server (moving the .xml to the desktop, deleting the .itl from the iTunes folder, re-importing the .xml).
I think I have done some other steps in between, too but none of them fixes that problem. Please note: I am not using an Apple AirPort Extreme but my service provider's Modem / Router combination. I do not think the problem is located in that Modem / Router / Network connection as it once worked without any troubles. Maybe I will try to connect my AirPort Extreme to that Modem somewhat later to see if this fixes the problem.
Any help is highly appreciated!
J

Looks like I found a solution on my own...
After renaming my iTunes Mediatheque in the iTunes preferences window on my iTunes server hosted by a Mac mini all mi iOS devices were able to load my mediatheque in complete again. It took some time to get all the covers but no title is left over.
I found this solution by "accident" when I noticed too many devices used more or less the same name on my network.
Strange.

IOS device not recognized in iTunes, Windows 7 Computer, or Device Manager

Sometime last week, I ran the updates for my computer. When I plugged in my iPod Touch afterwards, it would not connect to iTunes, although on the iPod itself, I could see it was connected based on the "charging" symbol on the battery icon. So I checked if my computer recognized it as a "Device with removable memory in the computer. Only "DVD RW Drive (E)" showed up and under the "Other" section only showed my iCloud Photos folder. I also checked the device manager for any drive with the name Apple- none. I have only 2 USB ports on my computer, and I've switched between them over and over. No result. I have checked the hardware id's on all my USB drives in the device manager, and I only find the HP TrueVision camera on my laptop.
After a couple of hours browsing through the support forums, I was able to restore the driver, thus allowing my iPod to be recognized again by the computer and iTunes.
on 10/14/13 I ran the installation for updates again, and the same problem occured with my iPod. So I went through the same steps from last week, but this time, no changes. I still cant get the drive back on my device manager. I've gone through all the support pages pertaining to anything and everything about this issue, and still, everything I tried from and simple computer restore to a clean boot has still rendered no results. I know my USB cable works because im able to charge my iPod from any outlet (computer, A/C adapter, car adapter) and sadly I do not have the means to try on another computer.
I have a HP 64-bit Computer running Windows 7 service pack 1.
iTunes version 11.1 currently installed.
iPod Touch 4th Generation iOS version 6.1.3.
The Apple Mobile Device Support is installed.
Can someone heplp me?

Have you tried to give your iPod a reset? Hold down the sleep and home keys until you see the silver apple. Let it reboot and try again.
Have you tried different USB ports? Rebooted your computer?
Uninstalled and then reinstalled iTunes? (You won't lose content if you uninstall)

Enrolling iOS devices "not shown in Configuration Manager console"

After successfully enrolled my Windows RT I want to enroll my iOS devices (iPad 1 & iPhone 4). First step is completing the iOS configuration (uploading APN certificate). Next step I associated my devices by installing management
profiles (https://manage.microsoft.com). All my application appears when starting the Company Portal App but my device will not appear in my Configuration Manager admin console.
When I select the Support tile in the Company App it says "Name not yet available", I'm not sure if this is a normal behavior?
Any thoughts/pointers are welcome.
Regards,
Ronny de Jong | inovativ.nl | Blog: donnystyle.wordpress.com | Twitter: twitter.com/ronnydejong

Hi Jon,
I've installed the iPhone Configuration Utility and collected the logging below as part of enrolling the iOS devices (iPad & iPhone) and installed the Management Profile:
iPAD
Feb 22 23:08:36 iPAD profiled[255] <Notice>: (Note ) profiled: Service starting...
Feb 22 23:08:36 iPAD profiled[255] <Notice>: (Note ) MC: Profile -M-i-c-r-o-s-o-f-t-.-P-a-y-l-o-a-d-s-.-D-e-v-i-c-e-I-n-f-o -q-u-e-u-e-d -f-o-r -i-n-s-t-a-l-l-a-t-i-o-n-.
Feb 22 23:08:37 iPAD Preferences[256] <Warning>: Splitview controller <PSSplitViewController: 0x24a900> is expected to have a master view controller before its used!
Feb 22 23:08:38 iPAD Preferences[256] <Warning>: BTM: attaching to BTServer
Feb 22 23:08:42 iPAD profiled[255] <Notice>: (Note ) MC: Checking for MDM installation...
Feb 22 23:08:42 iPAD profiled[255] <Notice>: (Note ) MC: ...finished checking for MDM installation.
Feb 22 23:08:43 iPAD profiled[255] <Notice>: (Note ) MC: Enrolling in OTA Profile service...
Feb 22 23:08:51 iPAD profiled[255] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
Feb 22 23:08:51 iPAD profiled[255] <Notice>: (Note ) MC: Issued certificate received.
Feb 22 23:08:51 iPAD profiled[255] <Notice>: (Note ) MC: Retrieving profile from OTA Profile service...
Feb 22 23:08:52 iPAD profiled[255] <Notice>: (Note ) MC: Received final profile: Microsoft.Profiles.MDM
Feb 22 23:08:52 iPAD profiled[255] <Notice>: (Note ) MC: Beginning profile installation...
Feb 22 23:08:52 iPAD profiled[255] <Notice>: (Note ) MC: Profile -M-i-c-r-o-s-o-f-t-.-P-r-o-f-i-l-e-s-.-M-D-M -i-s -r-e-p-l-a-c-i-n-g -a-n -e-x-i-s-t-i-n-g -p-r-o-f-i-l-e -h-a-v-i-n-g -t-h-e -s-a-m-e -i-d-e-n-t-i-f-i-e-r-.
Feb 22 23:08:59 iPAD profiled[255] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
Feb 22 23:09:00 iPAD profiled[255] <Notice>: (Note ) MC: Issued certificate received.
Feb 22 23:09:01 iPAD profiled[255] <Notice>: (Note ) MC: Profile -M-i-c-r-o-s-o-f-t-.-P-r-o-f-i-l-e-s-.-M-D-M -i-n-s-t-a-l-l-e-d-.
Feb 22 23:09:01 iPAD profiled[255] <Notice>: (Note ) MC: Removing certificate with persistent ID 69646e7400000000000000a2
Feb 22 23:09:01 iPAD SpringBoard[51] <Warning>: Reloading and rendering all application icons.
Feb 22 23:09:02 iPAD profiled[255] <Notice>: (Note ) MC: Removing certificate with persistent ID 69646e74000000000000009f
Feb 22 23:09:02 iPAD mc_mobile_tunnel[260] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Feb 22 23:09:02 iPAD mc_mobile_tunnel[260] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Feb 22 23:09:02 iPAD mc_mobile_tunnel[261] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Feb 22 23:09:02 iPAD SpringBoard[51] <Warning>: Reloading and rendering all application icons.
Feb 22 23:09:02 iPAD mc_mobile_tunnel[261] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: mdmd starting...
Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Looking for managed app states to clean up
Feb 22 23:09:03 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
Feb 22 23:09:03 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
Feb 22 23:09:03 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
Feb 22 23:09:03 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Network reachability has changed.
Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Network reachability has changed.
Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
Feb 22 23:09:11 iPAD mdmd[258] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Feb 22 23:09:11 iPAD mdmd[258] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
Feb 22 23:09:13 iPAD mdmd[258] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Feb 22 23:09:13 iPAD mdmd[258] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
Feb 22 23:09:14 iPAD mdmd[258] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Feb 22 23:09:14 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
Feb 22 23:09:14 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
Feb 22 23:09:14 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
Feb 22 23:09:14 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
Feb 22 23:09:16 iPAD mdmd[258] <Notice>: (Note ) MDM: mdmd stopping...
iPhone
Feb 22 23:23:22 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Checking for MDM installation...
Feb 22 23:23:22 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: ...finished checking for MDM installation.
Feb 22 23:23:24 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Enrolling in OTA Profile service...
Feb 22 23:23:24 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:24 SecTrustEvaluate [leaf AnchorTrusted]
Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:29 SecTrustEvaluate [leaf AnchorTrusted]
Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:29 SecTrustEvaluate [leaf AnchorTrusted]
Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Issued certificate received.
Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Retrieving profile from OTA Profile service...
Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:30 SecTrustEvaluate [leaf AnchorTrusted]
Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Received final profile: Microsoft.Profiles.MDM
Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Beginning profile installation...
Feb 22 23:23:37 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:37 SecTrustEvaluate [leaf AnchorTrusted]
Feb 22 23:23:37 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
Feb 22 23:23:38 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:38 SecTrustEvaluate [leaf AnchorTrusted]
Feb 22 23:23:38 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Issued certificate received.
Feb 22 23:23:39 iPhone-van-Ronny SpringBoard[67] <Warning>: Reloading and rendering all application icons.
Feb 22 23:23:39 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Profile Microsoft.Profiles.MDM installed.
Feb 22 23:23:40 iPhone-van-Ronny mc_mobile_tunnel[1094] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Feb 22 23:23:40 iPhone-van-Ronny mc_mobile_tunnel[1094] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: mdmd starting...
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Looking for managed app states to clean up
Feb 22 23:23:41 iPhone-van-Ronny com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[1091]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
Feb 22 23:23:41 iPhone-van-Ronny com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[1091]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Network reachability has changed.
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Network reachability has changed.
Feb 22 23:23:41 iPhone-van-Ronny awdd[1092] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Feb 22 23:23:41 iPhone-van-Ronny awdd[1092] <Error>: CoreLocation: CLClient is deprecated. Will be obsolete soon.
Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
Feb 22 23:23:45 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Feb 22 23:23:45 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
Feb 22 23:23:48 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Feb 22 23:23:48 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
Feb 22 23:23:49 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Feb 22 23:23:51 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: mdmd stopping...
Thanks,
Ronny de Jong | inovativ.nl | Blog |
Twitter

Devices not connecting to extender. Is there a way to force them?

Hey everyone,
Here is a quick setup so you know what I'm working with:
Basement--> modem-->airport extreme (hardwired) -->
Extender (New extreme on 1st floor) -->
Me with my devices on the 2nd floor.
Like the post says, the extender is set up fine and working. I checked and it is receiving and IP address from my main extreme as well as if I hard wire to the extender and turn off my wifi, it works great. The problem is, when I'm on the 2nd floor with my devices and I go into the Airport Utility, they are all connected to the basement's extreme and are very slow. Nothing connecs to the extender.
The whole point on the extender is to boost the speed when I'm on my second floor. Moving the modem and stuff out of the basement isn't an option, so I'm wondering if anyone knows any way to force everything to connect to the extender. BTW, everything is up to date.
Thanks in advance for any help, advice or troublshooting you help me do.

What devices do you have on the second floor?
iPhones, iPads, etc tend to hang on to the original router with which they connect...even when a stronger signal might be available. Try powering off the iOS devices and then powering them back up to see if they will pick up the stronger signal. Do the same with computers.
Unfortunately, there is no way to "force" a device to connect to a given wireless access point unless you assign a different wireless network name to the router and then "point" your devices at that network.
You can do this if the extender connects to the main router using a wired Ethernet connection, but not if the extender is connecting using wireless only.

IOS devices not connecting

Similar Messages

Maybe you are looking for