IOS devices won't automatically join Airport Express network

I'm at a friends place in New Zealand at the moment. I originally set up their network for them so know all about it. It's very simple. ISP router with wireless turned off. Ethernet cable into an Airport Extreme. That's it. The Airport Extreme is serving all the wireless traffic. They are a Mac only household.
I can get MacBooks to automatically connect when they come in and out of the house or turn wifi off and on but can not get this to work for iOS devices. If I go and manually join to the wireless network it happily joins without asking for a password but it will not auto join. When a device that was previously connected to the network comes back within range it refuses to automatically connect even if it's right next to the Airport. Even after I do join an iOS device to the network if the phone sleeps or autolocks it immediately loses connection again and won't auto join.
I've tried restarting everything including the iOS devices, Airport Extreme and ISP router. Everything is on the latest versions. iOS 8.0.2 for the iOS devices and the Airport Extreme is on 7.6.4. There's nothing else to restart. Any clues anyone?

Can Anyone help? Apple?

Similar Messages

I updated my software to iOS6 and now my phone won't automatically join known wifi networks even though I have it on. It goes back to 3G every so often when I'm at home instead of using wifi, and each time I ask to join it asks for my wifi password

I updated my software to iOS6 and now my phone won't automatically join known wifi networks even though I have it on. It goes back to 3G every so often when I'm at home instead of using wifi, and each time I ask to join it asks for my wifi password

Try this for your home Wi-Fi:
On your iPhone, Settings > Wi-Fi > select your home network > "forget this network"
Power down (unplug) your wireless router
Restart your iPhone
Plug in your router
Re-join that network
I don't know if this simple technique will fix it for good but try it. There is a long thread about this problem here: iOS 6 WiFi Disabled

IPhone won't automatically join my home network

My original iPhone (not 3g) won't seem to automatically join my home network. I can only join if I go into network settings and tell it to. It does, however, join other trusted networks that it sees but for some reason, not at home. What's really weird is that my wife has the exact same phone and her's automatically joins without any problem. I've even compared the network settings for both phones and they are exactly the same. Any suggestions?
Thanks

As a first step, delete this wireless network from your iPhone.
Go to Settings > Wi-Fi.
Select to view your wireless network settings for this network and at the top, select Forget This Network.
Rejoin the network and test if this resolves the problem.

Can't get Netgear wg602 v3 to join Airport Express network in client mode

Hello,
I have been happily using my Airport Express as a base station, but now I need to extend the range to a downstairs area, and I would like to do it with point-to-point bridging so that the AE is the base, and the bridge receives the wireless signal and shares it over ethernet to a switch downstairs.
I have (stupidly) purchased a Netgear wg602 v3 expecting that it would be able to be the client that could pick up and then share the AE's signal over ethernet, but I absolutely cannot get it to join the network and bridge the signal from the AE.
I have brand new firmware on both APs, and I have set them up so that they both have the same SSIDs and passwords, and the Netgear has the AE's MAC entered in it's point-to-point bridging section, and the AE has the Netgear's MAC in its WDS section.
Can anyone give me a hand getting this working?
Thank you very much,
Halle
Powerbook G4 Mac OS X (10.4.7) Airport Express, Netgear wg602 v3

Hi iFelix,
Thanks for your reply.
Last night after quite a bit of effort I actually got it to work without security.
The settings are to create a uniquely-named point-to-point bridging network with the Netgear, referencing the AE's MAC, and tell the AE to use the Netgear's MAC at its uniquely-named network as a remote station via the WDS tab in Airport Admin utility. Auto-configure remote base station will fail, but the AE will be able to join the insecure Netgear box to its network and the Netgear will subsequently relay requests received over its ethernet port directly to the AE.
My question now is whether there is any way to do this with a modicum of security. I guess there's nothing to do but experiment.
Powerbook G4 Mac OS X (10.4.7)

Error message 651 when I try to join Airport Express via Windows 7 laptop

Hi
I have a Macbook Pro - no problems.
My daughter has to use a Dell Laptop for work at home and not through choice.
It has been working seemlessly joining our Airport Express network, but now refuses
to connect automatically or when I click on connect ( Error message 651 )
She really needs to get this work done at home, but we've found it impossible to
get on the Internet. I've googled error 651 but get loads of Windows dead ends.
Any help from an Apple expert might help solve this problem
Thanks in advance of any replies.
Regards

Looks like I fixed it., thanks to another post I read. I went into my Norton Security. Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow" This also fixed my error (-3212) which would not allow me to connect to the iTunes store.

"another device is using the same ip address.." - iOS devices won't connect to AEBS wifi.

I've got a Motorola modem/gateway - 3360 from WalMart. I have the AEBS working in bridge mode connecting my iMac & Printer fine, but my iOS devices won't connect.
While troubleshooting & trying all types of settings, I was able to get EITHER the iMac or the iOS devices connected to internet, but not both at same time.
Then I noticed I am getting "another device is using the same ip address.." message.
I have changed the AEBS ip address & had been able to get either the iMac or iOS devices working depending on which ip address I use.
BUT now, all my iOS devices dont connect to the internet regardless of the ip address of the AEBS.
All my iOS devices see the network, and accept the network password, but they do not connect to internet, circle just keeps spinning...
Any assistance is GREATLY appreciated.
Thanks for any assistance,
Dave

It looks like may have to go back to square one and delete my network & set it up from scratch if I don't figure it out.
If you do go this route, I would like to make a suggestion for your consideration, and that is to assign static IP addresses to devices that are "permanent" on your network or ones you want to make sure can be reachable at all times. These (again) would be servers, routers, wireless access points, network printers/scanners, NAS devices, etc.
I would recommend the following IP addressing scheme as a baseline and you are certainly free to deviate in any way you see fit to meet your networking requirements:
Reduce the number of IP handed out by DHCP. By default, most routers will provide 100-200 private IP addresses within their DHCP leasing scope. The AirPort, by default, assigns 10.0.1.2 thru 10.0.1.200 via DHCP. Your Motorola may assign 192.168.0.2 thru 192.168.0.150. Either way, I would reduce this to no more than fifty (50) total which should provide you with plenty of addresses even if you are hosting gaming convention at your home.
I use the following IP address scheme for the "permanent" network clients:
Network Printers: 10.0.1.200 - 209
NAS Devices: 10.0.1.210 - 219
Wireless Access Points or routers reconfigured as bridges: 10.0.1.220 - 229
Servers: 10.0.1.230 - 239
With the "permanent" devices pre-assigned with static Private IP address that are outside of the DHCP range, you shouldn't ever get an IP address conflict again.

HT5211 My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?

My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?

Unless your HP printer is an AirPrint-ready device, just connecting it to the USB port of the AirPort Express base station will not make it so.
On the other hand, connecting a non-AirPrint printer to the base station's USB port it can be shared out by the base station's print server. Please see the following Apple Support article for details.

If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station.

If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station. I just bought the Airport Express and it's not clear how I should set up my System Preferences for Sharing. Thx

Yes. Unfortunately the stereo is too far from the wired ethernet connection My iMac is connected to the internet using an ethernet cable from the DSL modem (plugged into the wall, not wireless). The Airport Express is plugged into an outlet 25' away from the iMac and connected to my speakers. I've turned on the iMac Airport wireless Internet Sharing, hoping to stream iTunes to the Express connected to the stereo. The iMac Airport picks up several neighborhood networks so I know it's working (and I connected my iPhone wifi to it just to check as well).
When I use Airport Utility to set up the Express, the only time Utility recognizes the Express is when the iMac Airport is off. When I turn on the iMac Airport, the Airport Utility immediately loses the Express and asks to rescan.
Maybe that explains my problem better.

HT4145 why won't my old airport express work?

why won't my old airport express work?

Not sure what you mean by "won't work".
Won't turn on at all?
Won't allow configuration changes?
What are you trying to do with the AirPort Express?
If you could provide the Model No of the old Express.....look on the side of the Express for this.....it will be something like "A x x x x"
and
If you could provide the version of AirPort Utility that you are using.....open AirPort Utility, click on the AirPort Utility menu in the upper left corner of the screen, then click About AirPort Utility to locate the version number
We can probably help

Airport Extreme Killed My Airport Express Network!!!

I have been an apple user since 1992 - NEVER HAVE I FELT SO FRUSTRATED!!!! Sorry to shout, but this is as bad as it gets - my kids are screaming at me and my wife laughing!! I have had a reasonably good Airport Express network running in my house with an Express as the primary and internet connected to it by the ethernet port. I worked fine for my Intel iMac and my daughters Intel MacBook, but my son had problems in his room. We then got an xbox 360 and wanted to connect that so I upgraded to an Airport Extreme - Disaster!. Firstly the net went intermittant! Then I rebuilt from scratch restting all devices to factory defaults; worse and worse, the network kept failing to find various base stations. Finally I cut the Extreme out of the loop and tried to rebuild the original network; now Airport utility won't see any base station after I configue it!! Please help if you can!!!

If nothing works, try a factory reset: disconnect the Extreme from power, press the reset button, plug in power while still pressing the reset button, release reset button after 5 seconds or so.
This method usually helps me with problems with my Airport Extreme and Express (this happens seldom by the way). The only disadvantage is that you have to set it up again completely.

How can I share my Internet from my iPhone to Airport express network?

How can I share my Internet from my iPhone to Airport express network?

YES you can! - Gotta love those "you can't" answers from people who haven't even tried. ;o)
Just have your Airport Express "Join" your iPhone. It will share your Internet connection through its Ethernet port. I currently have an AppleTV connected via Ethernet to the Airport Express. With this setup I have wireless Ethernet AND wired LAN connection. I can even AirPlay to the AppleTV and have Internet at the same time. Haven't tried a switch/hub but see no reason why it wouldn't work. This proves to be very useful to create a wired network with Internet from a cellular device without Ethernet.

Airport Express network suddenly no longer visible - but only for one Mac..

What the..?
My 20" iMac Core Duo can no longer see my Airport Express network. It happened yesterday after restarting the AE a few times.. (I do this and also restart the modem from time to time if the net connection stalls - or I want to boot of my housemate's PC from the network cause she's hogging bandwidth)..
Anyway.. The first restart caused it to not re-appear on the list of available networks, so I restarted again.. then it was fine - it came back. All good.
I reset it again this morning because the net connection was not meeting my expectation and now the iMac no longer sees the AE network.
I can connect to other Wi-Fi networks around me (there is a neighbour with no WEP) but cant see hide nor hair of my own network.
The puzzling thing is that my girlfriend's Mac Book, my other iBook G3 and my housemate's PC can all see it and use the network fine - as normal..
So what has happenned? And what do I need to do?
Between you and me ..This intel iMac has been a bit tempramental ever since I got it.. weird things like this happen to it from time to time.. never one thing that you can point at and say AHA! Faulty [something] but just weird stuff like this... Hmmmm..
Some help would be much appreciated.. Thanks!
20" iMac Core Duo 2.0GHZ Mac OS X (10.4.7) 2GB RAM, 500GB HDD, 256MB Graphics

Well, from reading some other posts, and trying my own experimenting, I have gotten it to work.
Deleting the keychain did nothing, manually connecting to the network by typing the name in etc.. nothing.
What DID work was using my G3 iBook (which could see the network) to use the Airport Administrator to change the channel from Automatic to manual - in this case channel 7 (a completely arbitrary choice).
The thing I cannot work out is why it had this issue in the first place. It worked fine for months then one day decided that it apparently didn't like automatic channel selection.
The problem is solved but the cause is still a mystery.
Hopefully though, this might help others with the same problem.
20" iMac Core Duo 2.0GHZ Mac OS X (10.4.7) 2GB RAM, 500GB HDD, 256MB Graphics

How many people can simultaneously share airport express network?

How many people can simultaneously share airport express network? I want to set up a wireless network in my classroom and need to accommodate about 25 devices.

The AirPort Express will only handle 10 wireless connections.
You will need to consider an AirPort Extreme....which will handle up to 50 wireless connections.

Using my Actiontec modem's wifi, it doesn't find my new airport express. When I use the new airport express network I created error message says ip address is wrong. Help setting this new airport express up

Using my Actiontec modem's wifi, it doesn't find my new airport express. Using the new airport express network I just set up it says the ip address is invalid. What can I do to overcome this blinking amber light and error messages?

You need to begin by configuring the AEX to Join an existing network (Bridge Mode.) You can then connect to it using Wi-Fi, but the AEX will not extend your existing network.
If you can connect the AEX to your existing router using Ethernet, then you could use it to Create a new network. Otherwise, if you want to extend your existing network you will need to get a Wireless Access Point - WAP - from a non-Apple product like D-Link.

UNIX to Automatically Join an Open Network

I am looking for a UNIX command or a preferences file that will let me change a preference to many computers.
What I want to change is in Network Preferences, Airport, click the Options button and next to
"If no recent networks are found:"
I want to change this from "Ask before joining an open network" to Automatically join an open network".
Thanks

Hi James,
   I don't use Airport so I can't give you explicit advice. However, info about is often posted here so let me take a shot to get things rolling. A nice utility that Apple provides to make changes to an Airport network interface is
/System/Library/PrivateFrameworks/Apple80211.framework/\
Versions/A/Resources/airport
According to the help printout of that utility, the preference file for it is:
/Library/Preferences/SystemConfiguration/\
com.apple.airport.preferences.plist
Note that I've broken both paths into two lines to that the rendering of this thread doesn't get messed up.
Gary
~~~~
   Once a word has been allowed to escape, it cannot
   be recalled.
      -- Quintus Horatius Flaccus (Horace)

IOS devices won't automatically join Airport Express network

Similar Messages

Maybe you are looking for