Ios email app does not support user name with multiple "."

I have two gmail email addresses and have both set up on my ipad, however the ios email app cannot connect to the gmail server for one of the two accounts. Account settings are strictly identical and connection from the Gmail app works fine. The only difference I could find between the two accounts is that the one with connection issues uses a format of "[email protected]" whereas the one that works fine is "[email protected]". Is it a known bug that the ios app does not support the first format?
Thanks

Yes, double dots/periods are not allowed.

Similar Messages

This app does not support the contract specified or is not installed

I was successfully creating Windows Store Apps using Visual Studio 2013, using my dev account. VS has recently re-registered my ID as well.
Today, any Strore App (including "Mail", "Store", "PC Settings"...) not running nor any of project is not launching when I start debugging. It gives dialog as shown below. Also, as the app starts showing as installed in the
start screen, when I tap it there, it doesn't run. Just splash screen flashes for a few seconds and then disappears.
Microsoft Visual Studio
Unable to activate Windows Store app '3a829624-c06f-426b-8186-9312684573a2_bs4v6h88qrjp4!App'. The activation request failed with error 'This app does not support the contract specified or is not installed'.
See help for advice on troubleshooting the issue.
OK Help
If a post solves the problem you asked, please mark it as Answer.

This question needs to be asked on answers.microsoft.com. It is not a development question.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

What do I do when IPhoto says "mail server does not recognize user name/password?

What do I do when IPhoto says "mail server does not recognize user name/password?

Fixed by resetting my password to Apple's new protocol! In my case, I had to add a capitol letter.
Reset here:
https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot

Facebook app does not support my native language

Hi, can anyone tell me how to make facebook app support a new language. My iphone is able to read the language but the facebook app does not support it at all.
P.S: the language Im trying to use is Khmer. Thanks

Since the iPhone has never supported Khmer display, you have perhaps jailbroken it to add this?
For problems with the Facebook app, contact the people who make it.

This app does not support the language of the OS adobe illustrator

this app does not support the language of the OS adobe illustrator
The system language is Russian, so fellow connoisseurs help someone is not difficult

What system? What version of AI? You need to be more specific.
Mylenium

Does not support public parts with purpose assembly...

Hi,
When building a component, I'm getting the following error:
Server Component/Library DC does not support public parts with purpose 'assembly'.
Error: Build stopped due to an error: Server Component/Library DC does not support public parts with purpose 'assembly'.
Build plugin finished at 2011-03-24 12:12:40 GMT+01:00 (CET)
Total build plugin runtime: 0.311 seconds
Build finished with ERROR
To be more precise, one dc uses another from a public part that is "assembly" - so it's made the way it should be (both dc's are libraries, one java dc and the second one is server library)

Hi,
we are with NWDS 7.20 but afaik the "J2EE Server Component Library" in your version was replaced by Enterprise Application DCs in the meantime, so it is quite simple:
An assambly PP on a J2EE Server Component Library really does not make sense. The J2EE Server Component Library is the final assembly unit. You may use such a DC in two ways:
1. You want to use the classes that are bundled into the J2EE Server Component Library for compilation in another DC (Java or EJB). To achieve this you may create a COMPILATION PP on the J2EE Server Component Library that references compilation PP e.g. of your java DC. (The alternative is to let the using java DC directly reference the compilation PP of your Java DC.)
2. You have another assembly unit - e.g. an Enterprise application or another J2EE Server Component Library - that needs the classes in your J2EE Server Component Library at runtime. This is done by an application reference (in 7.20 defined in META-INF/application-j2ee-engine.xml of the DC that uses your J2EE Server Component Library). At runtime, the result is that your (initial) J2EE Server Component Library is the "parent class loader" of a using DC.
So indeed, there is no need for a PP of type assembly for a J2EE Server Component Library. This DC does not contrubute anything for assembly into another DC.
Rework your dependencies and PPs. [This PDF document|http://www.google.de/url?sa=t&source=web&cd=21&ved=0CBwQFjAAOBQ&url=http%3A%2F%2Fwww.sdn.sap.com%2Firj%2Fscn%2Findex%3Frid%3D%2Flibrary%2Fuuid%2F60d99678-1a29-2d10-94b4-9d9a67b7199b%26overridelayout%3Dtrue&ei=C1aSTZzgHsj0sga6l53QBg&usg=AFQjCNFGx2NeVkfWlnh0wGKsMasL95g18A] may be helpful.
Cheers,
Rolf

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?

Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.

Lexmark does not support USB printing with Airport express

See email from Lexmark:
Hi Herman,
Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
Regards,
Arshad
Lexmark Technical Support
***Original Message***
On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
Dear Mamta,
Thank you very much for your support. I already tried what you
mention, but still without success. I downloaded again the x1100 all
in one driver but still I can't print.
Any suggestions?
Thank you,
Hernan
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Sunday, June 18, 2006 7:30 AM
To: hernan
Subject: Re:Lexmark Technical Support (Req# 942782055)
Dear Hernan,
Thank you for contacting us regarding this matter. I appreciate the
opportunity to assist you, and I hope my suggestions will provide a
resolution.
Please follow the steps given below:
1. Click on "Start," "Control Panel" and "Printers and Faxes."
2. Right click on the Lexmark printer icon.
3. Click on "Properties."
4. Click on "Ports" tab.
5. Place a check mark against "Enable Bidirectional Support."
6. Click on "OK."
You may copy and paste the web address given below to access the
Lexmark 1000/1100 Color Jet printer Windows XP driver:
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
1:0:1:0:0&emeafr
ame=&fileID=1580&searchLang=en&searchLang=en
Please use the following steps to download the Lexmark 1100 Color Jet
printer Windows XP driver to your desktop:
1. Click on "Download Now."
2. On the "File Download" screen, choose "Save."
3. The next screen will be titled "Save As." Choose to "Save in
Desktop"
and click "OK."
4. You should see files being transferred.
***Note*** If your browser uses a different file downloading format
than specified above, you will need to resort to your browsers help
files for downloading instructions. The object of steps 1 - 4 is to
download the driver to your desktop. This way it is easily accessible.
5. Once the files have completed downloading, double click on the icon
with your file name.
6. On the "Win Zip Self-Extractor" screen click "OK."
7. To unzip the downloaded file choose "Unzip."
8. A screen will then display the number of files unzipped
successfully, click "OK."
9. Please follow the on screen instructions to complete installation
of your Lexmark printer.
If you have any more questions or concerns, please contact me at your
convenience and I will be happy to assist you. (If I am not available,
another representative will reply to you as soon as
possible.) To respond,
please select "Reply" in your e-mail software, and be sure that the
past e-mail is included in this reply.
[AOL Users: In order to include the previous e-mail, you must
highlight it with your mouse when you are replying.]
If you need to reply, please be sure to include in your message all
information from prior e-mail messages & replies. If your e-mail
client automatically deletes prior e-mail thread information, it will
cause a delay while we look up your support history. If this is the
case you may want to save the old e-mails as attachments and attach
them to the current e-mail.
Sincerely,
Mamta V
Lexmark eSupport Team
http://support.lexmark.com
Rate Your Support Experience! Your feedback is extremely valuable to
us.
Please click the link below to participate in the Lexmark Customer
Support Survey.
http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
07&getSurveyName
=
***Original Message***
On Sat Jun 17th 06:20:55 AM EST 2006,
hernan.>
I purchased the Apple airport express that connects
multiple
wireless-networked PCs to a usb printer.
is there a driver that can make this work?. I configured
the printer
according to the manual, received a test page and so on, but now it
takes ages to start printing and printing never gets to 100%
completion but to 99%. I am not able to cancel printing jobs and this
is a whole mess.
Best regards,
Hernan
vaio pcg-6c2l and IBM x40 Windows XP Both service pack2

Did you have a question?

Reminders App does not work on Yosemite with two iCloud accounts.

The Reminders App does not work on Yosemite (10.10.1) with two iCloud accounts. It seems like when there are two iCloud accounts connected in Yosemite (10.10.1) the plist file for Reminders disappears.
I have tried restarting Reminders; restarting the mac; starting the mac in recovery mode to repair the disk and disk permissions; and starting the mac in recovery mode and reinstalling OSX.

Yes sharing Reminders list works. The problem is, I have one shared iCloud account with a colleague (shared calendar, Reminders and email). It makes it easier to run our business with a single shared iCloud account...I know it's not the typical usage.

Hosting company does not support SQL query with OUTFILE clause

From my mysql database, I want to allow the user to run a query and produce a csv / text file of our membership database. Unfortunately, I just found out my hosting company does not support the SQL query with OUTFILE clause for MySQL database.
Are there any other options available to produce a file besides me running the query in phpadmin and making the file available to users.
Thanks. George

Maybe this external Export Mysql data to CSV - PHP tutorial will be of help
Cheers,
Günter

My Satellite A100 does not support SDHC cards with the internal card reader

Hi,
My satelite A100 does not support my sandisk 4 GB SDHC card.
"normal" SD cards are not a problem with the internal card reader, and there are no problems with the sandisk 4 GB SDHC card using a external card reader.
is there a software solution?
regrads,
Itock

I do not have time to read users manuals for your notebook model but all supported cards can be listed there. I suppose SDHC is not listed and not supported.
I do not know what you mean with software solution but, as far as I know, update for multimedia card reader is not available.

N97mini email app does not receive and send emails

I have installed Nokia email app (build 10.2.0.26 (main)) onto my N97mini. I have setup it up to fetch emails from my gmail and yahoo mail accounts. I also added gadgets to my screen so that I can view incoming emails. It worked before. But now, it stops fetching emails. When I go options->tools->connection info, it always shows offline mode.
I use several wifi network between home and school. Other app like opera works fine. I can use opera to access my gmail. When I do options->Send/receive, nothing happen. The icon on the top of the email screen is always a circule with a slash. So it means offline mode. I suppose when I click Send/receive it should go online to check emails. But it does not. Very few times, it goes online and checks email by itself. But I have no idea what triggers that.
The setting is:
what to sync [Inbox] = sync enabled
when to sync [days] = 7 days; [hours] = on all day; [disable sync when] = battery at 15%; [Send and receive] = soonest;
Please advice what do I miss here?

now my one account works perfectly without any additional changes, but my other one works not.
it shows that my password or username is wrong then i deleted it, created it new. after typing password and username 10 times right it worked. i got my emails and one minute later the same problem again...
i really do not understand the problem... i use the same preferences for the other account and it works, and everything worked untill yesterday. seems like it works if the iphone just wants to.
i am feeling like using windows
my provider is gmx. pop account information with my adress and name, server for incomming emails: hostname is pop.gmx.net username and password are correct.
thank you.

"Invalid Bundle." "...viewer.app does not support the minimum OS version specified in the Info.plist"

I tried re-building the app and it's not helping. The plist has the minimum OS listed as 6.0. I could go in and try to change it manually but then the signing would be invalid. Please fix this ASAP.

Apple runs an automated set of verification steps when an application is uploaded to check for various app requirements and sometimes they break those tests. The result is apps that are valid get tagged with seemingly random errors. This, unfortunately, seems to happen most often right around the time of new OS releases.
App submissions to iTC stuck in "upload received" status is a good example of this kind of problem. On September 9th customers started a thread that covered three different errors from iTunes that started appearing with no notice or warning. All DPS customers were impacted. You can see our progress on the investigation at http://status.adobedps.com/?p=728. We worked furiously through the night to understand why the errors were happening, only to find that they all disappeared by 8:40 the next morning without a single change being provided by Adobe.
Invalid or Non-Increasing CFBundleVersion is another example from not too long ago where all of a sudden warnings started regarding the version format string. Not only was the warning being thrown, but e-mail messages were being sent to customers with a different explanation of what a valid number was, including the format we were using! We started to investigate and then Apple changed something and the warnings went away. The current warnings people get regarding a "consume:" entry in the app are a similar example. Apple even confirmed for us that we are doing things correctly (although they did suggest a workaround we can apply to suppress the warning, which we are shipping next week).
Please try the steps I mentioned above, in particular the one about updating Application Loader. If that doesn't resolve the problem we ask for your help by opening a case with Apple Developer Support and asking them to investigate. Once the case is open please send me a private message with the case number so we can work some of our back-channels as well.
Neil
Edit: Fixed the time on the first example, removed Monday. Oops!

Email App does not recove emails, but can send

The Email app stopped receiving email a few days ago. I'm using a Verizon FIOS email account. I have checked with FIOS support and there are no known issues on their end. I checked and double checked the outgoing email settings and they are correct. Even when setting them up there are no errors and everything looks fine. But no incoming email at all. A refresh does nothing, and no errors. Anyone have any suggestions on how to fix or what might be wrong?

Yes, you will need to do so... good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IOS Remote app does not control Internet Radio on Apple TV

I just bought a 3rd generation Apple TV and one of the things I want to use it for is playing Internet Radio stations (not the new Radio feature). It does this fine and I can listen to BBC radio stations, however, the iOS remote app can't control this for some reason. It works fine if I control iTunes on my Mac mini with the same app. This makes no sense. Am I missing something?

you know, as many movies as I rented this summer directly from the Apple TV, not once did i ever try to start one using the iPhone remote... guess it never crossed my mind to.
I wonder if it is even supposed to work that way though. Is there a rented movies category on the remote app when you are connected to the Apple TV?
I cannot remember, guess its been a while since I worked with it a great deal.

Ios email app does not support user name with multiple "."

Similar Messages

Maybe you are looking for