IOS: getting access to other directories in the sandbox

OK: I can write something in
     Documents > [a lot of useless stuff] > Pref
usning
     setPref
and read it using
     getPref
as explained here: http://forums.adobe.com/message/5376817#5376817
Now.
What if I'd need to write something OUTSIDE this particular folder, so I can use the Documents folder for sharing storage?
Thanks guys.
I <3 U.

https://support.apple.com/kb/HT4094

Similar Messages

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access him

Duplicate post.

I loos my APPLE ID, I have a new one, how can get access to data stored in the old one?

I loos my APPLE ID, Now I have a new one, how can get access to data stored in the old one?

Do you have the email & password of the old Apple ID?

How can i telnet or get access to other LAN members in LAN without using third party software?

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access him

I think you are using the wrong terminology. You can browse the hidden share of any pc if you know the ip and have a valid user account on the pc by typing in the following \\computername\c$ or \\ipaddress\c$ . It should prompt you for a user account. You may have to allow this through the windows firewall (or disable it completely).

My I-Pad is locked up with a message that I-Cloud has not been backed up in two weeks and that the I-Pad must be locked, connected to wireless, and plugged in. I cannot get this message to go away or access any other parts of the I-Pad

My I-Pad is locked up with a message that I-Clouhd has not been backed up in two weeks and that the I-Pad must be locked, connected to wireless, and plugged in. I cannot get this message to go away or access other parts of the I-Pad.
I can't turn off the I-Pad either.

U really need to call Apple support ,because only they can help you , or go the store but make sure u have an appointment ,they are always a mob scene

The computer that I had my iphone apps synced to has died and I don't know how to get access to my apps on the new computer. I'm using a Windows pc. I understand that I can only have my apps synced to one computer at a time, but the former pc is dead.

My HP Touchsmart died the other day. My husband works on computers as a hobby and was able to get me up and running on a Dell laptop in no time. I have an iPhone 4s and had all my apps on itunes on my HP. I understand that you can only have your iPhone apps synced to one computer at a time, but what do you do when the computer containing all your info is in unusable condition? I have tried deauthorizing all the computers associated with my account, that did not work. I had this problem once before and finally ( after much blood sweat and tears ) was able to deauthorize the old computer, but it was in working order. Two of the computers that are listed under the iTunes Wi-Fi Sync setting are no longer in use, the HP had my apps synced to it and the other had everything else except my photos, which are on a third computer that is still in use. Please forgive for information overload but am trying to give all the info that I think could be relevant. Your help would be appreciated so much!
Sincerely,
PiPI

Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

Unable to access my other macs in the airport network

Since I have installed Leopard 10.5.1 I am unable to access my other MACs in my airpot network for file sharing. Interesting that I can accesss my older IMAC which has TIGER 10.4.11 installed. This bug is new since I updated to 10.5.1. Its funny but "screensharing" on the other hand is working.
(I checked all possibilities in the firewall setting. (File sharing) is allowed on all MACs.
Anyone with a solution or having the same problem
Tony

Ok, they didn't post the link to my screen cap.
Here is the link to the screen cap of my problem in FireFo:.
http://i88.photobucket.com/albums/k196/ajax6677/more.png
Here is how it looks when loaded properly in IE:
http://i88.photobucket.com/albums/k196/ajax6677/more2.png
They are also attached below/

TS1702 My App Store shows that I have 9 available updates, but the update screen remains blank. My ios is up to date, I have an active connection and can access every other section of the store.

I Can't access upgrades that the app stores keeps notifying me about. The update screen is just blank.

Folks can wait it out or I understand if you go to purchased and your list of apps you will see a little update banner on the ones that need to be updated. YOu can then download them manually.

My iTunes music is on an old laptop which I cannot get access to. Is there a way I can still get access to my music via the cloud and use on my various Apple devices including a new nano that I have just purchased?

My iTunes music is on an old laptop which I cannot access. What options do I have to play my music on the apple devices including a new Nano that I have just bought?

The files that weren't inside the media folder on the original machine need to be copied over to exactly the same paths as they had on the source machine. See this thread for an ongoing discussion of a similar problem. See also this post on migrating the iTunes library.
tt2

HT1178 What the difference is between WPA and WPA2 and how are these settings affecting the access of other computers to the internet through my Time Capsule

I have a Time Capsule of the 4th generation and I am pretty impressed since I just had a fried harddrive on my 3 month old Imac and Time Capsule restored it fully including all programs etc. without having me to put in all serial numbers etc. for that I give it an A+. However what I find very frustrating is the very short and incomplete user manual and setup instructions. I give those a D-. It does not explain the consequences of certain choices to a normel non computer gig user like me:
I do not understand what the consequences and difference is between the security setting WPA/WPA2 and WPA2 when setting it up. It would be helpful if the manual would explain something like: If you set it onto WPA2 then computers older than XXX years will not able to hook up to the internet through your router...or the likes, since I slowly supect this may be the reason for some of my troubles.
I also have a 5 year old PC with vista connected to the Time Capsule. It can wireless connect to the Time Capsule and access the printer (I have managed that after some painful hours...) but it cannot access the internet with that PC through the timecapsule wireless, only if I hook it up with a cable. Why? Does that have to do with the fact that I have set the TIme Capsule to WPA2?
Our PS3 can connect wireless, no problem. However, I friend of mine tried it with a quite new Toshiba Notebook and he could see the Time Capsule but again it shows the line from the Time Capsule to the internet blocked. All other computers linked with data cable to the Time Capsule are connected to the internet no problem. What have we done wrong? Should I change the security setting to WPA/WPA2?
I tried the latter, but then another problem does come up, which was there from beginning on: When I change the settings for my Time Capsule my Imac suddenly cannot find the Timne Capsule anymore, even so I am only 3feet away from it. When I set it up for the first time 3 month ago it drove me crazy. The very first time it found the Time Capsule right away. But when I discuverd a mistake in my initial setup and I went through the settings again to change stuff it suddenly could not find the Time Capsule anymore. Only after frustrating 20 times or so with turning wi-fi on and off several times inbetween did it suddenly find the Time Capsule in the set up menu. However, when I tried changing my security setting to WPA/WPA2 today to see whether this solves my other problems again it could not find the Time Capsule when I was finished with the settings and I had to give up/cancel. Why is that???
I would really appreciate some help here. But please I am not a computer gig and normally always had assistance with these things. On the other hand I am not all stupid either (even so these manuals assuming we all grew up sleeping on a computer make me feel stupid).....
Thank you all in advance

Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
- To use the TC as a router or as an external HD.
The difference between WPA and WPA 2 are:
- They are two kinds of internet connection.
WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
If you need any help or if you find some difficult setting up it you can contact Apple Support.
I am sure that they can help you with that.
I am sory for the delay. I holpe that you solve your issue.

I am able to load some pages from a particular website while other pages from the same site give the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete."

I am able to access some directories on the website without any problems while I get the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." error for other directories of the same site.
== URL of affected sites ==
http://www.safelistgrande.com

Suddenly from yesterday I am getting this error while trying to opening gmail

Why do my Visitors users get Access Denied in my New Forms - Mobile Devices Only

The issue I have is that I have a SP2013 Site with a group Visitors.
the default Site Permissions have been set to Read.
I then created a SharePoint List with a People Picker.
I broke the Security inheritance and gave the Visitors group Contribute Permissions
In Browser mode, they can access the site, open all links and even add content to list.
When I do the same actions on a mobile device, All the visitors get Access Denied when clicking on the Add Content Link.
The Link I make available is "https://myweb/sites/site/Lists/mylist/NewForm.aspx"
I have found some suggestions about unplublished content, but this does not explain why the user can perform the required actions on a desktop, but not on a mobile device using the same link

Hi,
By mobile do you happen to mean iPhone? There has been quite a few issues with SharePoint 2013 and iOS authentication. You might want to refer to the following exchange.
http://apple.stackexchange.com/questions/146808/ios-8-safari-sharepoint-2013-windows-authentication-support
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield

VPN connection works, but can't ping or access any other device on remote network

I have an OS X Lion server at work (uses a static IP of 192.168.2.10). VPN is setup and works.
The work network's router has an IP of 192.168.2.1 and hands out IPs of 192.168.2.100-149. The VPN service is configured to hand out IPs of 192.168.2.150-170.
My home network uses a router with an IP of 192.168.1.1 and hands out IPs from 192.168.1.2-49
Both routers are using subnet mask of 255.255.255.0
The problem is, I can connect to the VPN just fine and access all services running on that same OS X server like iChat and AFP file sharing. But, I cannot directly access any other device on the office network like client machines or even trying to log into the router's GUI interface. Pings timeout, etc.
Example:
At my home, I have a local IP of 192.168.1.12 and I connect to the work VPN. It assigns me an IP address of 192.168.2.151 and I'm able to connect to iChat on the OS X server that has a static IP of 192.168.2.10
In terminal, I try to ping the router on the work network (192.168.2.1) and I get no response (even though ICMP response is turn ON). I try to ping another OS X workstation on the work office, and get no response.
I'm not sure how to fix this, or whether I need to change settings on either router or the server.
Would greatly appreciate any insight or help on this. Thanks.

danimalapple wrote:
I have an OS X Lion server at work (uses a static IP of 192.168.2.10). VPN is setup and works.
The work network's router has an IP of 192.168.2.1 and hands out IPs of 192.168.2.100-149. The VPN service is configured to hand out IPs of 192.168.2.150-170.
My home network uses a router with an IP of 192.168.1.1 and hands out IPs from 192.168.1.2-49
Both routers are using subnet mask of 255.255.255.0
The problem is, I can connect to the VPN just fine and access all services running on that same OS X server like iChat and AFP file sharing. But, I cannot directly access any other device on the office network like client machines or even trying to log into the router's GUI interface. Pings timeout, etc.
Example:
At my home, I have a local IP of 192.168.1.12 and I connect to the work VPN. It assigns me an IP address of 192.168.2.151 and I'm able to connect to iChat on the OS X server that has a static IP of 192.168.2.10
In terminal, I try to ping the router on the work network (192.168.2.1) and I get no response (even though ICMP response is turn ON). I try to ping another OS X workstation on the work office, and get no response.
I'm not sure how to fix this, or whether I need to change settings on either router or the server.
Would greatly appreciate any insight or help on this. Thanks.
Check the DNS settings on the server (see my earlier post in this thread).

How can I get access to my Macintosh HD

Hi!
I tried to boot my Macbook, but it went straight to OS X Utilities. Now, i could not repair the disk called "disk0s2", and my Macintosh HD is not showing up on the left panel. I tried to reinstall the OS but the only HD that appeard were the Recovery HD.
I then bought an external hard drive and installed the OS on it, from which I am able to boot now.
Is there a way to get access to my photos on the Macintosh HD (which is missing, sort of) before i try to fix the hard drive by formating it?
I am not very good at computers and I really need some advice..

Try using a data recovery product such as the ones listed here. Don't write anything else to the drive until the files are recovered or you choose not to recover them.
(104227)

Getting Accessing iTunes Store.. Never able to access it. Also try to update 10.6.1.7 itunes and i get could not contact server??? thoughts please

I am getting Accessing iTunes Store.. in the midlle pane with the status bar Never able to access it. iTunes does not lockup but cannot access itunes. Also tried to update current version 10.6.1.7 of itunes and i get could not contact server??? thoughts please. PC specs. Windows Vista home 64 bit OS. IE 9

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

IOS: getting access to other directories in the sandbox

Similar Messages

Maybe you are looking for