IOS not reading it is running iTunes 10.5 beta

won't sync in iOS 5 bc needs iTunes 10.5 but it is running 10.5

iOS 5 is a closed beta for developers only.
Questions about it need to be asked in the developer area.

Similar Messages

  • IPhone disk not read or write using iTunes.

    iPhone disk not read or write using iTunes. I've tried the permissions on my MacBook Pro. I'm convinced it's my phone. This just started out of the blue. Any guidance ?

    1. There is no such thing as an "iPhone disk."  Please recheck that error message.
    2. iPhones have NEVER been able to file transfer with BlueTooth to a computer.  The BlueTooth profile has never been part of the iOS.
    3.  What iPhone model and iOS version, and what iTunes version are you using?
    4. Is this phone jailbroken?

  • Ipod not read by Windows or itunes

    I have an older ipod clickwheel. It worked beautifully until 10/15/08 when my computer ("computer A") automatically installed Windows Vista updates. When I connected my ipod to the computer's USB port, I got a nasty whirring sound and it did not appear in Windows or itunes. I toggled hold switch, reset and disconnected. I then connected it to my laptop ("computer B") and it worked perfectly. Now laptop has automatically installed Windows updates (Windows 2003, not Vista) and the ipod is doing same thing on that computer -- endless whirring, frozen up, not recognized by Windows or itunes. When I reset my ipod, it works fine, but I can't update any of my music/podcasts because it won't sync. It's forever stuck on 10/15/08 content. What should I try next? Thanks

    erfva,
    If you can get the iPod recognized in iTunes, you can always attempt to restore it: http://support.apple.com/kb/HT1339
    However, if it's not recognized in iTunes you can attempt to format it using Disk Mode, using your Windows OS (just like you would format any drive). Here is a good article on what to do if the iPod is not seen in iTunes: http://support.apple.com/kb/TS1373?viewlocale=en_US
    Unfortunately beyond that, especially if it's making whirring or clicking sounds, it can be a hardware failure which would require service: http://support.apple.com/kb/TS1382
    Hope this helps,
    Raleigh

  • My iMac will not start up after running on Yosemite since Beta 4

    Hi!
    I have successfully been running Yosemite since the Beta 4 on my late 2012 iMac (se spec below). But I did notice that the boot process delayed for some time after approx ⅓ of the progress line was passed.
    Today it did not pass this point. I had it running overnight, but it would not start up in normal mode.
    It does start in safe mode.
    I have run diskrepair
    I have unplugged all peripherals
    I have run the Apple Diagnostics (or AHT), no problem there whatsoever.
    Is there anything else I can do except reinstall Yosemite or go to an apple workshop for repair??

    I have the same problem (and have posted it elsewhere) and I have already rolled the system back to Mavericks to keep working. That seems to be he only course open for now, but will leave us with an increasingly obsolete system and future problems with new/updated apps. Not only that, but my iMac has plummeted in value.
    Faced with a £1000 12-month old iMac that can't be updated, I seem to have an expensive paperweight and am beginning to regret the unkind things I said about Microshaft.
    A solution is still needed, and none seems to be forthcoming from Apple.

  • I have a 2cd Generation iPod touch and it will not read on finder or iTunes.

    My friend comes to me anything and everything I.T, especially when it comes to his iPod. He came to me the other day, Tuesday to be exact and told me his iPod wasn't showing up on his computer. We both have MacBook Airs as given to us by our school. His charger doesn't work so we used my iPhone charger which has never been a problem before. The iPod used to be his cousins and she upgraded and gave him that iPod. I believe it was synced to a Windows computer. He told me it wasn't showing up but yet it claims to be charging, even giving me the sound when we hooked it to the computer. He hasn't downloaded anything yet, so I soft reseted the iPod by going into settings->general->erase all content and I let it do its thing. Its giving me the USB-->iTunes logo and I know I can't get back into the iPod because it's erased. Huge mistake I made. I let it charge overnight so the battery is fully full. We both updated our iTunes and our computers software. I tried putting it into DFU mode and it dosen't do anything. I turned it off and plugged it in and it comes on, but still dosen't read on iTunes nor Finder. I tried deleting apple mobile sync but its not even a source on my computer. Im usually good with finding things & I don't give up until I fixed it. When it comes down to me posting in forums, that means its serious lol, please, I need help. Help Please!
    p.s: because I reseted it, I am not able to figure out what operating system it's in and cannot figure out its last update, as a fyi.

    If it never worked before for your friend, it could be broken (or was working unreliably).  There may be a reason your friend's cousin gave it away.
    If it does not appear in iTunes, what you can try is more limited.  It did operate by itself (when disconnected), correct, although it may now be erased?  So it still charges when connected?
    Also, you are connecting it to a connection that definitely works with your iPhone, right?  So we can rule out iTunes, the Mac's USB port, and the docking cable as reasons the iPod is not connecting.
    If you have not already, you can try resetting the iPod while it is connected to the Mac (with iTunes running)
    http://support.apple.com/kb/HT1430
    Also, this forum category is actually for older (music player) iPods.  You may want to summarize what you know so far and ask the question in a new topic here
    https://discussions.apple.com/community/ipod/ipod_touch
    which is the forum category for iPod touch.  More iPod touch users are likely to read your question there.  I could request that this topic be moved there, but a brand new questions will be read more often.

  • Not enough memory to run iTunes???!!!

    I just ran the Software Update to get iTunes 7 and the latest version of Quicktime. I restarted after the instalation and was able to open iTunes and it ran famously. I really enjoy the changes. I decided that with the new artwork features I should clean up my library and add to the artwork I already had so I got a few more album covers and also got rid of some duplicates I had lingering in my library. After I did that for a little while I quit iTunes to go do other things but when I came back to my computer to listen to some music I got the following mesasge: "The iTunes application could not be opened. There is not enough memory available." I highly doubt that this could be because I have 768 MB RAM installed on my computer. I tried restarting and that didn't work. I even tried quitting all applications and closed every widget in Dashboard, yet I still got the same message. I am clueless, please help.

    758mb should be enough to run Tiger, but I try to not let my computer get down below about a gig of memory. If I do I get a similar message and programs start to become too taxing on the computer.
    I think by updating your album art you may have pushed it...I'd try deleting some files, free up some space, and see where it takes you.

  • Not able to successfully run itunes video on pc

    when trying to watch tv or movies via i tunes the audio and video does not synch   I either have video or I have audio but never both.   Been happening since I upgraded yesterday.  I downloaded a second version of quick time and I can go through windows explorer and successfully play everything but rentals with the independent version of quick times.  I have uninstalled and reinstalled i tunes twice.   the second time was after i restored windows to a point before the auto updates that happened yesterday.  

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom
    BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

  • I can't run Itunes! After installing Itunes, I receive a message saying that Windows could not verify Apple's digital signature and it closes.

    Pls HELP me! I can"t install it Itunes on any of my computers. After downloading it ( Run now or Saving it) it will no run because I keep receiving a message saying that Windows can not open this file because it could not verify Apple's Digital Signature. I have changed my internet security settings to allow downloads from unverified websites but it will not allow me to run Itunes. I had an older version of Itunes so I tried to install the update and it wouldn't work because so the same message about not being able to verify the digital signature.  I uninstalled Itunes and Quicktime and all other Apple programs on my system. Then I tried to download it again... no luck the same message came up again. I then went to my other computer that NEVER HAD ANY APPLE software on it and tried to download Itunes. It gave me the same message. Please help me, I'm going crazy tring to figure this out.

    I had this same issue occur today during update, searched and finally tracked to problem with windows registry. Used online version of windows registry tool "Fix It" (can also download portable version for offline check. I selected Apple updater utility from list to fix and it did it's thing. Returned to my downloaded 10 iTunes adn isntalled perfectly fine.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Good luck. Worked for me back up and running.

  • External dvd will not read

    my external dvd drive will not read it just runs then spitts it out,

    Is the external USB drive product an Apple USB SuperDrive?
    http://www.ifixit.com/Device/Apple_USB_SuperDrive
    Not sure if a cleaner disc would help, or if there is a defect in the
    drive which may cause a disc to be re/jected. If the drive were an
    internal one, a reset may apply; such as NVRAM. However due
    to this being an external one, I don't know if that'd do anything.
    You may have to look on the maker's site to see if there are any
    support links or suggestions on how to make it work, if not Apple.
    There are some Support articles concerning their USB Superdrive.
    •Apple computers: Troubleshooting the slot-loading superdrive
    http://support.apple.com/kb/HT2801?viewlocale=en_US
    •Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964?viewlocale=en_US
    Could be this reset may help the optical drive work correctly.
    But your mileage may vary, depending on other circumstance.
    Good luck & happy computing!

  • Im running windows 7 64 bit. installed itunes 10.5.4.1 and now cds will not import or play. If i have the cd in the drive and then open itunes it will importor play but after removed the next disc will not read. the system has passed the cd/dvd test.

    Cd import/play problem. Downloaded itunes 10.5.. Cd will play and import when disc is present when itunes is opened. If itunes is open cd will not import or play. Itunes passed the cd/dvd test.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601) Dell Inc. Studio XPS 8100 iTunes 10.5.1.42 QuickTime not available FairPlay 1.13.36 Apple Application Support 2.1.5 iPod Updater Library 10.0d2 CD Driver 2.2.2.0 CD Driver DLL 2.1.3.0 Apple Mobile Device 4.0.0.97 Apple Mobile Device Driver 1.57.0.0 Bonjour 3.0.0.10 (333.10) Gracenote SDK 1.9.5.502 Gracenote MusicID 1.9.5.115 Gracenote Submit 1.9.5.143 Gracenote DSP 1.9.5.45 iTunes Serial Number 003AABF40351C940 Current user is an administrator. The current local date and time is 2011-12-01 17:19:39. iTunes is not running in safe mode. WebKit accelerated compositing is enabled. HDCP is supported. Core Media is supported. Video Display Information ATI Technologies Inc., ATI Radeon HD 5700 Series **** External Plug-ins Information **** No external plug-ins installed. iPodService 10.5.1.42 (x64) is currently running. iTunesHelper 10.5.1.42 is currently running. Apple Mobile Device service 3.3.0.0 is currently running. **** CD/DVD Drive Tests **** LowerFilters: PxHlpa64 (2.0.0.0), UpperFilters: GEARAspiWDM (2.2.2.0), D: HL-DT-ST DVD+-RW GH50N, Rev B103 Audio CD in drive. Found 16 songs on CD, playing time 72:03 on Audio CD. Track 1, start time 00:02:00 Track 2, start time 04:58:07 Track 3, start time 11:45:30 Track 4, start time 16:27:57 Track 5, start time 21:35:15 Track 6, start time 27:59:00 Track 7, start time 31:22:40 Track 8, start time 36:52:12 Track 9, start time 40:32:40 Track 10, start time 44:19:40 Track 11, start time 48:30:60 Track 12, start time 51:37:72 Track 13, start time 56:13:50 Track 14, start time 58:24:10 Track 15, start time 63:10:50 Track 16, start time 68:05:00 Audio CD reading succeeded. Get drive speed succeeded. The drive CDR speeds are:  4 8 16 24 32 40 48. The drive CDRW speeds are:  4. The drive DVDR speeds are:  4. The drive DVDRW speeds are:  4. Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off
    I ve tried completely removing itunes and reinstalling. also unchecked autocorrect and find art and track names which did not work as well. Any ideas of how to fix this?

    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601) Dell Inc. Studio XPS 8100 iTunes 10.5.1.42 QuickTime not available FairPlay 1.13.36 Apple Application Support 2.1.5 iPod Updater Library 10.0d2 CD Driver 2.2.2.0 CD Driver DLL 2.1.3.0 Apple Mobile Device 4.0.0.97 Apple Mobile Device Driver 1.57.0.0 Bonjour 3.0.0.10 (333.10) Gracenote SDK 1.9.5.502 Gracenote MusicID 1.9.5.115 Gracenote Submit 1.9.5.143 Gracenote DSP 1.9.5.45 iTunes Serial Number 001CA97403888A88 Current user is not an administrator. The current local date and time is 2011-12-03 16:12:39. iTunes is not running in safe mode. WebKit accelerated compositing is enabled. HDCP is supported. Core Media is supported. Video Display Information ATI Technologies Inc., ATI Radeon HD 5700 Series **** External Plug-ins Information **** No external plug-ins installed. iPodService 10.5.1.42 (x64) is currently running. iTunesHelper 10.5.1.42 is currently running. Apple Mobile Device service 3.3.0.0 is currently running. **** CD/DVD Drive Tests **** LowerFilters: PxHlpa64 (2.0.0.0), UpperFilters: GEARAspiWDM (2.2.2.0), D: HL-DT-ST DVD+-RW GH50N, Rev B103 Audio CD in drive. Found 19 songs on CD, playing time 68:17 on CDROM-XA media. Track 1, start time 00:02:00 Track 2, start time 02:36:15 Track 3, start time 05:52:55 Track 4, start time 08:48:37 Track 5, start time 11:50:00 Track 6, start time 16:08:30 Track 7, start time 19:21:52 Track 8, start time 23:31:17 Track 9, start time 28:27:45 Track 10, start time 32:05:00 Track 11, start time 35:40:32 Track 12, start time 39:10:30 Track 13, start time 43:50:25 Track 14, start time 47:11:10 Track 15, start time 50:32:47 Track 16, start time 56:31:25 Track 17, start time 60:03:10 Track 18, start time 62:37:37 Track 19, start time 64:55:62 Audio CD reading succeeded. Get drive speed succeeded. The drive CDR speeds are:  4 8 16 24 32 40 48. The drive CDRW speeds are:  4. The drive DVDR speeds are:  4. The drive DVDRW speeds are:  4. Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off. Just turned pc on this is my test. Also dell has included a temp read in the dell support center. temp is 30 right now. Also listed was  the max temp. in the pcs lifetime as 43.

  • IPhone 4s new IOS update problem. Itunes not reading phone anymore. Help!

    I decided to update my IPhone, since I had the time. Thankfully, I did a back up before doing so. I hit "update" and my phone worked normally through it, until it said "Waiting on IPhone" for quite a few minutes. The screen of my phone also has the Itunes logo with the charge cable (not the USB side). Thinking the phone was saying it wasn't connected anymore (like something was wrong with my cable) and thats why it was taking so long, I unplugged it and plugged it back in. Bad move on my part, as now Itunes will not read my phone, and my phone no longer works properly. It is stuck on the screen I described. I have reset the phone, my computer, and changed cables to no avail. Is there any way to fix this? Or do I need to make an appointment with the Genius Bar?

    Hey Ogie35,
    I have two articles for you that might help you troubleshoot this issue. First, this article is useful if you are connecting to the Bluetooth device for the first time:
    Get help connecting your iPhone or iPad to a Bluetooth accessory
    http://support.apple.com/kb/ht6473
    Next is an article about basic troubleshooting steps for Bluetooth:
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I restored my pc and nowit won't open itunes, when i try to, it reads " this version of itunes has not been correctly localized for this language. please run the english version." how do i fix this so i can open my itunes and back up my iphone?

    I restored my pc and now it won't open itunes, when i try to, it reads " this version of itunes has not been correctly localized for this language. please run the english version." how do i fix this so i can open my itunes and back up my iphone?

    Hey KEBENNETT, 
    It sounds like you've restored Windows on your PC and iTunes is no longer opening and running normally. 
    I'd recommend using the instructions found at step 4 and 5 in this article to repair or remove/reinstall your iTunes installation:
    Issues installing iTunes for Windows - Apple Support
    All the best,
    Jeremy 

  • HT201407 Updated my iphone 3gs to ios 6.0.1. Receive message "your iphone could not be activated because the activation server is temporarily unavailable". The phone could not read my Roger iccid. I tried with wifi and itune. Could not access restore on i

    I can not activate my iphone 3gs after updating to ios 6.0.01. I tried connecting to the activating server by wifi and itune. Keep getting the same message"your iphone could not be activated because the activiation server is temporary unavailable". It could not read my Rogers iccid. I try to restore my phone on itune but it does not have the "restore" icon. Please help.

    bladetibi wrote:
    the same problem i have to......i have to go to my operator to solve my problem????and then i will be able to activate my iphone ???and have service????thx
    See your Other Post on this Topic...
    https://discussions.apple.com/message/20817908#20817908

  • I have a iphone 3gs. while connecting to itune, it advised me to upgrade the phone to ios 6. ii downloaded and upgraded the phone to ios 6.but the phone is not going for set up and not reading the sim. Please advise.

    i have a iphone 3gs. while connecting to itune, it advised me to upgrade the phone to ios 6. ii downloaded and upgraded the phone to ios 6.but the phone is not going for set up and not reading the sim. Please advise.

    YOu'll have to restore, nothing else you can do.
    If you have an older backup you can restore to that.

  • IPhone iOS 5.1.1 will not sync voice memos to iTunes

    My iPhone running iOS 5.1.1 will not sync voice memos to iTunes. I have tried trimming the memos, and changed the label. No go. The "include voice memos" is checked on iTunes sync, but iTunes won't even create a voice memos playlist. Help? These are brand new recordings, and they are too long to email.

    Try Handbrake to convert your movie to an iPhone format.  Then reimport it to iTunes and synch to your phone.

Maybe you are looking for

  • Publish of product catalogue cancelled by system shutdown

    Hi, We have an issue in SRM 4.0 where the publication of the product catalogue was running when the system was shutdown. The job has the status of cancelled in SM37 but the status of the catalogue publication is status 'R' (Running). This stops this

  • Does BPM 11.1.1.7 support parameter roles properties in LDAP?

    Dear Expert:            I know the BPM 11.1.1.5 support paramter roles,but it seems we must extent user properties then using these as parameter,I want to know can I using properties in user's LDAP properties then using as parameter in 11.1.1.7?     

  • Dodging the wipe order.

    How can I download pics from my iTouch to a PC, Sd-card, anything w/o connecting to the internet? (If I connect to the internet, then my erroneously issued 'wipe' command will take effect; the pics were not backed up onto my iTunes acct apparently).

  • Happy Birthday Keanu!

    I don't have any birthday photos since I haven't celebrated it in years but I just watched the Matrix again and I hope this is acceptable-. Good luck everyone! 

  • REG ABAP Queries

    Hi All,   I have a requirement in ABAP query where i need to populate the output based on certain conditions. like if material type is YFG then some fields should be populated and if it is something other then some other fields should be displayed .