IOS notifications break when i enable Work Exchange

My iOS notifications have always worked perfectly well both displaying in the lock screen view and via popup but recently i have started activating my work MS exchange mail on my iphone at random times (to quickly check work email). The notifications will continue working for the next couple of mails but then they stop entirely. If i disable the exchange account i'll still receive no notifications from my other imap/pop accounts. I'll only hear a beep or feel a buzz indicating that a mail or notification has occurred but the screen stays dark. It seems like a bug to me. Is anyone else aware of this?

This is intended behavior. Missed calls appear when the phone rang and you "missed" the call. When you aren't connected, you don't receive the call so it is not a "missed" call. You will only receive a notification if there is a message in your voicemail once the phone comes back online.

Similar Messages

  • I am downloading ios 7 and when it stops working down

    I am downloading ios 7 and when it stops working down

    Hiya.
    I had exactly the same issue last night. I found a fix and now my phone is going through restore.
    Follow the instructions here:
    http://appletoolbox.com/2010/09/itunes-10-the-network-connection-was-reset-fix/
    I know it says itunes 10, but it seemed to work for me with itunes 11 :-)

  • Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

    Hi Team,
    Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
    and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
    Regards
    Sahil bhateja

    Hi,
    So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
    Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
    Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers. 
    if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
    Yolanda Zhu
    TechNet Community Support

  • I have iOS 7. When I go to the itunes store on my ipod touch it gives me a blank screen with nothing on it. I restarted my ipod touch and it didn't work. Can someone help me with this?

    I have iOS 7. When I go to the itunes store on my ipod touch it gives me a blank screen with nothing on it. I restarted my ipod touch and it didn't work. Can someone help me with this?

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>iTunes and App stores and sign out and sign back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      

  • I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.

    I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • When i updated my iphone 4S to ios 6.1.2 internet stoped working, why?

    when i updated my iphone 4S to ios 6.1.2 internet stopped working, anyone know why and how i can fix it?

    i did back up before i updated, but when i try to backup it gets to the very end then says my iphone says has been disconnected then my iphone restarts everytime, i lost my contacts, everything there was even all the songs i bought from itunes

  • My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

    My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

    Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

  • Region Monitoring iOS 7 : didEnterRegion method is not calling when app is killed by user or by OS in iOS 7 only. It is working fine when it is in background. and the same code is working fine with iOS 6 for both app in suspended mode and background mode.

    Region Monitoring iOS 7 : didEnterRegion method is not calling when app is killed by user or by OS in iOS 7 only. It is working fine when it is in background. and the same code is working fine with iOS 6 for both app in suspended mode and background mode. What changes I have to made to work great in iOS 7 also.

    I rewrote code for debugging purpose and tried to catch error using GetLastError();  method,
    but it only printed 0. Below is code snippet; I think Create() throw an exception
    and code goes to catch block. 
    LONG ConnectTS(CString strIP, UINT n_Port)
    try{
              ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
              if(!Create())
    // Exception Line
    n_Err = GetLastError();
    return NET_INIT;
    catch(...)
                       DWORD errorCode = GetLastError();
                       CString errorMessage
                       errorMessage.Format("%lu",errorCode);
                       ErrorLog (0, 0, "Image
    System", (LPTSTR)(LPCTSTR)errorMessage);
                       return  IS_ERR_WINDOWS;
    Output: -
    ConnectTS is calling Create [is going to call]
    Image System
    0

  • My traffic conditions dont show up on the notification even when it is turned on - ios 8

    my traffic conditions dont show up on the notification even when it is turned on - ios 8
    I have tried hard resetting. I had a similar problem with the weather but got that resolved now. Any ideas on how to fix?
    Thanks

    I'm having the same problem on my iPhone 5s. Traffic conditions are not even a option under edit, but weirdly my wifi iPad Mini Retina shows traffic conditions. I feel like I'm missing some option, but I can't figure out what it could be.

  • HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

    My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • I have iPhone 4 and I update it to iOS 7 and when I try to start the personal hotspot it crashed and for sometime my cellular data was also not working then allot a sudden the personal hotspot icon disappeared from my settings

    I have iPhone 4 and I update it to iOS 7 and when I try to start the personal hotspot it crashed and for sometime my cellular data was also not working then allot a sudden the personal hotspot icon disappeared from my settings.
    Has anyone faced a problem like this!!!

    No. If you go Settings App > General > Reset > "Erase All Content and Settings", you will have the same iOS that was on the iPhone when you tapped the Erase button. If you believe your iPhone is Jailbroken, then this will not work. If you use iTunes on computer, this will put iPhone to current iOS which is iOS 7.0.2

  • My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera.

    My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera. I plan on replacing this phone with an iphone 5s when it comes out but I need this phone to work until then.

    When you did the restore, did you restore from a backup or restore as new? The final step of user troubleshooting is to restore as a new device, not from a backup. If you restore as a new device and the camera still does not function, it is probably a hardware issue. Make an appointment at the Apple Store Genius Bar and have the device checked by a Genius.

  • I upgraded my iPad (3rd gen) to iOS 7.  When I go to iTunes and look at the summary and to the "Apps" list tab, iTunes stops working and shuts down.  What can I do?  I am using a Windows 7 machine.

    I upgraded my iPad (3rd gen) to iOS 7.  When I go to iTunes and look at the summary and to the "Apps" list tab, iTunes stops working and shuts down.  What can I do?  I am using a Windows 7 machine.

    Hi thanks for the encouragement.  It's not that the severs are "swamped", iOS 7 has been successfully installed.
    I can't access the apps list in iTunes because it *****
    down.  Its pretty frustrating because many of my apps require me to manually transfer files into iTunes first to view
    them.  Not sure if the servers being swamped is an issue for me, unless they release a bug fix through another version of iTunes.
    Has anyone else had this problem?  My iPad is pretty useless unless I can access my app list in iTunes....

  • This isn't achely a question it's about iPod  not iPhone but can Apple. Make all apps work with iOS 7 even when it's really old

    This isn't achely a question it's about iPod  not iPhone but can Apple. Make all apps work with iOS 7 even when it's really old

    And it's totally impractical for any OS to provide complete backwards compatibility in perpetuity. So no, Apple cannot grant your request. As WJ said, it's the developers' reponsibility to provide updates to their applications to be compatible with newer operating system releases, whatever the platform might be.
    Regards.

  • HT4623 how to update to ios 6.1 when my update software is not working

    I have iPhone 4s how to update to ios 6.1 when my update software is not working when I click software updates the gear is turning and there is a message downloading and estimating time remaining but I stays like that for two days now nothing is happening what can I do?

    MICHAEL MI IPOD ES 4 Y TAMBIEN QUIERO DESCARGAR IO7 PERO ME MARCA ITUNES QUE EL IO7 ES UN BETTA Y EL 21 DE SEP ITUNES BUSCARA UNA ACTUALIZACIO DE SOFTWARE DE IOS Y EL QUE SIGUE ES EL 6.1.3 Y LUEGO EL 7.0 DESPUES EL IOS X Y DESPUES EL IOS 7.1.2 MI DUDA ES CON CUAL SE VA ACTUALIZAR MI IPOD4 EL 21 DE SEPTIEMBRE

Maybe you are looking for

  • IBook G3 website hosting

    Hello, I am currently using my iBook G3 to host my website, but I am not too happy with how fast the page loads. My other Macs on my network as well as Macs outside my network load the page the exact same way. I have tried all browsers and safari see

  • Ringtonessssss

    hi do i have to buy ringtones from iTune store, can't i just create my own ringtone without buying it? and if i have to buy, what do i do if the song i want to be a ringtone is not found in the store?

  • How to append to a file

    hi here is my code. i wanted to appended the string to the file with out rewriten over it. and how do i make it do a new line. import java.io.* ; import java.awt.*; import java.util.*; import java.text.*; import java.lang.Byte.*; import java.awt.Even

  • What is the best upgrade. If I am using PM 6.5

    Hello Everyone,                       We create E-books nothing to do with designing and some time (Maths-Equations). Currently, We using PM 6.5 on win:98 with all that old software installed. However, We looking for upgrade either Win7 or Win-Xp. I

  • Zones not booting - failed to create devlinks: Interrupted system call

    I just installed the latest 10_Recommended cluster with 118833-36 kernel patch and now my zones won't boot. I get the error: (root)Yes Master?> zoneadm list -iv ID NAME STATUS PATH 0 global running / - samba installed /export/home/zones/samba - web i