IOS prompts for a client certificate each time i change webpages on a site

The company intranet is published through a TMG 2010 box and we use client certificates as an extra level of authentication in addition to AD user / pass.
With any PC based browser you are prompted once for the certificate to use, however in IOS 5.1.1 on iphone and ipad we get a prompt each time you go to a new page, safari prompts for the certificate to use however the more times you change the page the more it relists the certificate in the selection window. The certificate you see in the screen shot is installed once. The first time I change the page, safari reprompts and lists 2 certificates (both the same) next time i change the page it then lists the certificate 3, then 4 then 5 times etc. The client certificate is issued directly from the root CA so this isnt the issue of IOS not supporting 2 or 3 tier certificates.
All other PC based browsers work fine and only prompt once then happily reuse that certificate when you change pages without reprompting.

We're experiencing the same problem.  We are also publishing internal web applications via TMG 2010, using forms based authentication with client SSL certificate authentication.
We see this problem on devices using iOS 5.1.1.  Devices with iOS 6 are automatically selecting the client certificate.  Unfortunately upgrading to iOS 6 is currently not an option.

Similar Messages

  • ITunes keeps prompting me to reenter the security code for my credit card each time I make a purchase

    ITunes keeps prompting me to reenter the security code for my credit card each time I make a purchase, saying my Windows 7 PC is a new device. However, the PC is on iTune's list of authorized devices for downloads. What's causing this? I do block cookies etc on browsers.

    I don't know. No, it doesn't use your browser. Perhaps you should call and find out what the problem is.
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes
    international calling numbers..
    For Mac App Store: Apple - Support - Mac App Store.
    For iTunes: Apple - Support - iTunes.

  • HOW TO STOP THE PROMPTING MESSAGE OF MASTER PASSWORD EACH TIME I OPEN MOZILLA FIREFOX?

    HOW TO STOP THE PROMPTING MESSAGE OF MASTER PASSWORD EACH TIME I OPEN MOZILLA FIREFOX?

    Firefox will ask for the Master Password on startup if it is needed on a page.<br />
    This can be Sync or a web page that is (re)opened automatically and you have saved a name & password for this website.
    You didn't confirm whether you are using Sync or not, so I don't know which of the two would apply.

  • When a site asks for a client certificate, not all certificates are presented.

    At www.pkiuniversity.com/sandbox/index.php, I am asked for a client certificate. I get to choose from a list of the certificates issued by startcom but not my own. The extended key usage does mark it for client authentication. The root certificate corresponding to the signing private key is also in the store. Why don't these certificates pop up. They do in Safari.

    If you're interested, I get my certificate from
    reloid.com/enrollments/cheapcerts3/getcert.php?email=[email protected]
    This is designed to be a very insecure certificate with no chance of being added to the built-in cache.

  • I designer I want to create forms for web client, does each client have to purchase form central to access the data?

    I designer I want to create forms for web client, does each client have to purchase form central to access the data?

    Hi,
    In this scenario, you can share the document with the clients to and provide co-author privileges.
    Co-authors can edit the form design, options, responses, and summary report (everything that you can do).
    Note:- They do not require a paid subscription to view the responses, free subscription users can become co-authors.
    Please refer to the following thread to know how to share a form with others:-How do I share a form I created with others?
    Regards,
    Nakul

  • [FlashPro CC & AIR] Icons are reset each time I change the target Air Platform

    Hi guys,
    I have an annoying bug with my Flash CC : I'm building an Air app and each time I change the target platform (either Android or iOS or Windows) the <icon> tag is cleaned... so I have to set all the icons files again. Each and every time. All the icons.
    Is it a known bug ? Is there a fix ? Is it a feature ? I tried to uninstall and clean all the cache, it does nothing. I have Flash CC on my work computer and on my laptop and the problem is on both computers...
    I have the latest version of Flash CC and it's not linked to an Air version.
    Thanks in advance for your help !

  • With the new upgrade to iOS 7 for the iPhone, is there anyway to change the background on the calendar?

    With the new upgrade to iOS 7 for the iPhone, is there anyway to change the color background on the calendar? 

    There are, however, lots of calendar apps in the App Store. They will used th same data as th built in app and sync just the same way. Many of them are quite customizable or, at least have different backgrounds. Some that I like are Week Cal, Fantastical, Cal, Tempo.
    Best of luck.

  • OneDrive for Business sync prompts for ODfB client install

    Working with a client that has installed Office 2013 ProPlus on an image that is being deployed. Users currently logon to their computer with a local account (Active Directory in process of being deployed).  User is "migrated" and begins
    to logon to Active Directory.  User now logs on to the O365 portal and accesses their OneDrive site, not yet populated with documents.  User clicks "sync" and is prompted to install a OneDrive for Business client, even though it has
    already been installed as part of Office 2013 ProPlus.  Install proceeds and Internet Explorer closes.  Once install has completed, user logs on to O365 portal and attempts to sync OneDrive.   User is prompted again to install the appropriate
    client.
    I have tried clearing IE cache, launching IE in InPrivate mode and using Chrome.   Same behavior.
    Any suggestions?
    Thanks,
    [email protected]

    New fun behavior noted:
    New behavior.  Similar scenario:   User logging on to PC with a local account.   Office 2013 ProPlus, including ODfB is installed.   User is NOT currently using ODfB.  Using Word
    2013, Excel 2013, PPT 2013, Outlook 2013 ( connecting to Office 365 mailbox) and Lync 2013 (connecting to Lync Online) are being used by the users.  Users machine is joined to a domain, User local account profile is migrated to domain profile.  
    User logs into PC with domain account.  ( Matching the Office 365 account, typically [email protected] ).  User logs into Outlook and Lync with no issues.  User logs into the Office 365 Portal, selects OneDrive, and selects Sync. 
    "Sync this library to your device for easy access" window appears.  User selects Sync now..  User is presented with "Sign in  Call us overprotective, but we need to verify you account again before opening "https://realgoods-my.sharepoint.com""
    windows.  User enter his email address and clicks Next.  User is then presented with "Sign In" windows and enters User ID and password.  User is then presented with the "Overprotective" window.  This happens 3 times
    until user gets "We cannot connect to the specified SharePoint site." error message.
    IE browser cache has been cleared.  Steps have been followed to clear all document cache files.  sharepoint.com, microsoftonline.com, office365.com have been added to the Trusted Sites zone and added to IE compatibility list.
    Any clues on this one as well????
    R,
    Dale
    [email protected]

  • I have updated my ipod touch but i have to update iphone and ipad 1 and ipad2 . How can I save the udated software in order to avoid teh time for downloading it again each time

    I have updated my ipod touch but i have to update iphone and ipad 1 and ipad2 . How can I save the udated software in order to avoid teh time for downloading it again each time

    Even though the downloads are for the same iOS version number, they are different downloads and you can't use an iPod iOS update to update an iPhone or iPad etc. The iPad 1 and iPad 2 are also different downloads. So you will need to download different updates for your iPod Touch, iPhone, iPad 1 and the iPad 2.

  • Lowest cost SSL accelerator for HTTPS client certificate auth testing

    Hi,
    I need to test some some https connections that use client certificate authentication and need a low cost ebay-purchasable cisco ssl box (I think).
    My understanding is that some Cisco products can terminate https connections (once client cert auth is successful) and then pass on the http connection with a cookie value set with the Subject DN information from the client certificate - correct me if I'm wrong :).
    So any suitable kit for this?
    Thanks,
    Marc.

    Hi Oliver,
    Have a look at this http://forum.java.sun.com/thread.jsp?forum=2&thread=258908
    You may find the answer to your question there.
    Majid.

  • ICloud Outlook add-in causes Outlook to hang for 30-120 seconds each time I enter the Calendar.

    The iCloud add-in for Outlook seems to be causing some issues with my Outlook calendar: each time I go from the Mail tab to the Calendars tab, Outlook freezes for a minute or two and then resumes functioning.
    The problem is definitely with the iCloud add-in itself: if I disable the add-in, my iCloud calendars still appear (but do not sync), and Outlook works fine. The freeze does not seem to happen the first time I go into Calendar after starting Outlook, but every subsequent time it does happen.
    I am using Outlook 2010 (32-bit) on Windows 7 (64-bit). I do not know and haven't been able to figure out how to tell if I'm running 32 or 64 bit Apple software on this computer.
    I would appreciate any help, and particularly any thoughts on what the iCloud add-in is actually doing at the moment you go into Calendar view that might be causing problems. Does it sync at that time (and apparently in a poorly designed way)? Or is it just some rendering or other similar issue?

    The sync can be very long, nbut only when you sign in from the Control panel. Once you're in Outlook, I don't think you sync that much.
    I have the same issue using my old PC. Maybe you should check your hard drive, your memory usage and CPU usage. I fixed it by a new laptop, last year. Usually, this is a sign that you're short on memory and you're using the Windows page system memory file. So, your CPU might come short, your hard drive might be too slow or you don't have enough memory..  Otherwise, your hard drive may be too slow and very fragmented, reqyuiing Windows to spin a lot and read bits of files stored everywhere. The solution would be to defragment your hard drive. or worse.. it's a slow hard drive or showing sign of fatigue.
    I'll go with defragmenting the hard drive first, then, the CPU and memory bump.

  • How to create a FCPX Project Template so you don't have to wait for titles to render each time?

    Hi there
    I'm currently creating 3-4 minute video clips that all look pretty much the same, just with different video and audio really.
    I have a title at the beginning, video and audio throughout (with a couple of cross dissolve transitions) and 2 titles permanently over the video.
    The video changes per video, the audio changes per video, the title at the beginning changes per video, but the two titles over the video do not need to ever change.
    Is it possible to create some kind of Project Template where I just replace the video/audio clip and the rest pretty much stays the same?
    The problem I'm having is that its taking forever to render the two titles over the video each time.
    Is there anyway to get around it having to render the two titles over the video each time as they dont ever change? (Well the length of them does, but not the text itself)
    Thanks

    shippo_uk wrote:
    Is there no way …
    again: each frame has to be re-calculated.
    consider speeding-up render-processes by
    • a new, faster Mac
    • more RAM
    • purchase of Compressor, and use its 'virtual render-farm'-feature aka full-use of all cores of your Mac
    • even more Ram
    • clever 'distribution' of source files and project files onto fast (7200rpm/ fw800) external harddrives instead of one single intHDD for OS&working files
    • a lil' more Ram
    • play wit your kids while Mac's rendering …

  • Server for 2 clients at a time

    Hi there. How can I create a server that accepts only 2 clients at a time? If one of these 2 should go down server should permit another connections that means total connections from clients shoud not be more than 2.
    Here is my server.Have any ideas?
    import java.net.*;
    import java.io.*;
    import java.util.*;
    public class CollabServer {
    public int contator;
    public CollabServer() throws IOException{
    ServerSocket server = new ServerSocket(5000);
    System.out.println ("Accepting connections...");
    while(true) {
    Socket client = server.accept();
    System.out.println ("Accepted from " + client.getInetAddress());
    new CollabHandler(client).start();
    public static void main(String args[]) throws IOException {
    new CollabServer();

    I did what you said but I don't know how to do the third step of yours. HOW can I do the server to not accept more tha 2 connections whitout server.close?
    Did you mean something like that?
    import java.net.*;
    import java.io.*;
    import java.util.*;
    public class CollabServer {
    public int contator;
    public CollabServer() throws IOException{
    ServerSocket server = new ServerSocket(5000);
    System.out.println ("Accepting connections...");
    while(true) {
    if(contator < 4 ){
    Socket client = server.accept();
    System.out.println ("Accepted from " + client.getInetAddress());
    new CollabHandler(client).start();
    contator = CollabHandler.activeCount();
    if ( contator == 3) {
    server.close();//should I do this?
    public static void main(String args[]) throws IOException {
    new CollabServer();

  • How to run a webdynpro multiple times by passing different parameters each time and save webpages with parameter name?

    Hi Experts,
    I am a BW consultant and new to webdynpro. Not sure how to run RSO_METADATA_REPOSITORY multiple times and by passing different parameter values each time(either taken from an a standard BW table or user provided - anything is fine) and build web pages with parameter name. Need help with direction on where to start.
    Let me step back and explain my requirement:
    In BW we have an object called transformation.
    One way of generating documentation for transformation is highlight transformation and press F1. Then its documentation will be opened as a local web page.
    I need these web pages for all transformations. This is my requirment.
    I came to know that RSO_METADATA_REPOSITORY is beeing used to generate this web page.
    The web link is something like below:
    http://ubw05.xxx.com:8005/SAP/BW/DOC/METADATA/?page=BW_O_D&SystemID=BWPCLNT100&ClassID=TRFN&ID=0KHR6J65AIIUTCJZEC093K6XDFV909PB&objectVersion=A&sap-language=EN&sap-client=100
    When i run this link seperately(not by selecting transformation and pressing F1) i need to enter login credentials to BW system.
    My challenges is how do i pass login credentials and multiple transformation IDs to generate multipe web pages with each page named by transformation ID?
    WHere to start? First of all is RSO_METADATA_REPOSITORY Webdynpro JAVA or webdynpro ABAP or can i use anything?
    Since it is beeing opened as local webpages i assume it is webdynpro JAVa is that correct?
    Thanks,
    Raghu

    hello,
    might be a problem with the version you are using.
    regards,
    the oracle reports team

  • Why should i recompile reports each time i change databas

    Dear Forum Experts :
    I have .rep reports which are runtime of the jsp
    Each time i do any changes in the database , i get an error, then i should copy the source reports (.JSP) and recompile it again to get the runtime(*.rep) works properly.
    please tell me whether this is a bug or not, and how can i overcome this problem.
    Thank you

    Hi Inol
    Thank you for your response,
    I don't remember the error message exactly, But it states something like ' unable to run report, error in memory, error in procedure or function'
    And this error doesn't come if i compile the report again.
    The erro comes even if I drop the schema and create it again, then import its objects from a dump file (exported before i drop the schema), Is this a logical error ???!
    Note : this error does not come if i used the source report (*.jsp)

Maybe you are looking for