IOS PS Touch stuck on load screen.

I tried to save a small project (1 layer, 3 filters) and it's now stuck on the blue loading screen with the PS Touch logo. I've deleted the app & re-downloaded it, but it's made no difference. Any ideas ? Thanks

Could you try to retrieve  your PSTouch project files with this tool...
http://www.macroplant.com/iexplorer/
See the attached image. I marked the PS Touch files with a red rectangle.
Try to reboot PS Touch afterwards.  If you still see this issue possibly a re-install would help.
You can restore your PSTouch files with the same tool or just add them to the https://creative.adobe.com
and download from there.
Hope that helps.
-Guido

Similar Messages

  • IPod Touch stuck at loading screen after clicking Erase all Content and Settings

    I have a 4th generation iPod Touch running iOS 5.0.1 and I recently jailbroke it. I wanted to update to iOS 6 so I went to Settings>Genera>Reset and clicked on Erase all Content and Settings. It is now stuck on the spinning loading screen and its been like this for 3 hours. My homebutton no longer works so I can't put it into DFU mode. I tried to restore in itunes but it won't even connect to itunes and dosn't show up at all. If you have any info, please post. I really don't wanna have to replace my home button or get a new iPod. Thanks

    Try the following as much as you can without Home button working. When it says to place the iPod in recovery mode use this program.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • IPod Touch stuck on loading screen

    This is somehow FRUSTRATING. My iPod touch (4G)is always stuck on the loading screen whenever i unlock it.
    It only happens if i didn't use it for the whole day, and if there's a program are opened. I didn't jailbreak it, and my ipod touch never fall. I tried to restore it. And it didn't help! I just had it for less than a month.
    Can anyone help me? Could it be a hardware defect? Can i get replacement from the apple store?

    Did you restore to factory defaults/new iPod? If not, try that.  If it still occurs then you likely have a hardware problem and an appintment at the Genius Bar of an Apple store is in order. If your iPod is within warranty, not abused and effective, Apple will replace it at no cost.

  • Ipod Touch stuck at loading screen

    I bought an ipod touch 8 gig from a friend of mine and when i got it home i done an erase all content from the ipod settings and the person didnt tell me it was jail broken so now it is stuck on the loading screen and i have put it in dfu mode and itunes keeps giving me an error that it can not find the right file for it to recover it
    i have fully updated my windows and all the apple software i got installed is fully up-to-date and i have no other usb stuff plugged in when tryin to do it
    i am running Win xp on the latest updates
    i have tried every thing i have found on the net and nothing is working so i come here to see if anyone could help me with this problem

    An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect the iPod, then try again. The required file cannot be found
    that is the error message i am getting

  • Photoshop touch gets stuck on load screen on samsung grand, neo, core and most of the samsung phones

    photoshop touch gets stuck on load screen on samsung grand, neo, core and most of the samsung phones

    Hi,
    which version are you using of the app?
    Does it help to set the phone in flight mode?
    Thanks,
    Ignacio

  • Unable to boot Z10, stuck on loading screen at 99% after a few hours.

    Hi, I am unable to boot Z10, stuck on loading screen at 99% after a few hours. I did not try to update, nor load any other OS versions.  Running a Bell Canada 10.1.  Tried to pull battery, leave phone boot for 5 hours, still stuck on 99%.  I tried plugging it in BB Link and computer will not recognize it.

    dazedandconfused wrote:
    Every option Im seeing is telling me Im going to lose my data... is this true? I know with other phones ppl are able to mount the device as if it were a hard drive and pull content from it... is this not possible with the Z10? Thanks...
    I understand you are frustrated and seeking solutions, but please don't double and triple post your inquiry.
    I've answered your thread already, here: 
    Re: Z10 stuck on loading logo on starting up
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Windows 8.1 RTM stuck on loading screen

    HP Pavilion g6  2100sy
    I have problem Windows 8.1 RTM stuck on loading screen (clean install).
    No updates, drivers or programs not installed. Windows 8 works perfectly.
    Please help.

    Hi,
    I'm facing the same problem here with my HP Mini, if you have a keyboard (USB) or a mouse, try to remove them & restart.
    In my case this doesn't work, but it can work for you.

  • HT1455 My iMac stucked at loading screen( Spinning gear )..

    My iMac stucked at loading screen( Spinning gear ), i tried everything including reboot process while pressing shift key in keyboard but it is not responding, please help me with this. thanks in advance.

    You might try the following:
    I would first reset the SMC:
    Shut down and unplug the Mac.
    Keep the Mac unplugged for at least fifteen seconds.
    Plug the Mac back in and do not turn it back on for at least five seconds.
    Press the power button to turn the Mac back on.
    Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
    Hope this helps

  • IMac is stuck on loading screen

    Hello
    My IMac (2009 i think), was working well, no problems at all. Tonight I started it and is stuck on loading screen. I have tried holding the Shift key and still doesnt stark. What can I do?
    This morning it was working fine.
    Thanks!

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, or are running 10.7+, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitiion & use Disk Utility from there to Repair the Disk, then Permissions.
    Re-install if that doesn't work.

  • Bloomberg Mobile stuck on loading screen

    After I run Bloomberg Mobile, it gets stuck on loading screen and showing timeout. My device is Bold 9900,and now I'm living in China. I'll appreciate if someone can help.

    After I run Bloomberg Mobile, it gets stuck on loading screen and showing timeout. My device is Bold 9900,and now I'm living in China. I'll appreciate if someone can help.

  • My computer is stuck on loading screen with logo and spiny thing

    Hi my dads friend gave me his old iMac it was the computer and mouse no keyboard and it stuck on loading screen with logo and spinny thing he said it could be curruption in the software or chip out a few millimeters or something with the hard drive any help?? Please

    I'm having some difficulty in understanding you.   What is mdnsresponder?   How can you edit files if you can't get past the blue screen?   What are you using to post these messages on the forum?
    Let me suggest the following and see how you go.
    Do you get the ‘Orchestral’ start up tone when you power up?
    You might try this.
    Shut down the machine.
    Disconnect the power cable.
    Wait about 15 seconds
    Reconnect the power cable.
    Wait a few more seconds.
    Press the power button to restart.
    If there is no change ...
    Try to start the system in Safe Mode.   You can do this by restarting the machine and holding down the shift key as soon as your hear the start up tone.
    More information on >>>      http://support.apple.com/kb/HT1455
    If the system boots in Safe Mode you could have a software issue and may need to reinstall the OS.    Which is why I asked if you have or can get the original DVD.

  • Macbook stuck at loading screen

    Hello,
    I need help. My mac stuck on loading screen. I've tried everything, read different threads, nothing helped. Repaired in disk utility, it said OK. Tried to reinstall Mac OS, but after content is downloaded, computer restards to install it and stucks again. Tried hardware test, but it stucks when it's almost done. Did ar resets, repairs etc. Please help me!

    If you've tried repairing the disk from the installation discs without success, you really need to try with something a little more robust. I'd suggest DiskWarrior. http://www.alsoft.com/DiskWarrior/index.html
    If that's not an option for you, you can consider an Archive & Install which will preserve your User, settings, and files. Have a look here:
    http://support.apple.com/kb/HT1710

  • My playbook is stuck on loading screen

    ive tried every solution to fix this thing and having no luck i had to buy a new one cause this one was borrowed it was not droped or soaked it just froze  on a game and after i tried to reboot noting happeded and i checked if it was fixable they saif the moddle i had was p[ast the freee send in thing  my gf just got this **bleep** thing on christmas  like what the **bleep** you guys if nothing is done i will be doing some serious anti blackberry posts on youtube and one will be me smashing this playbook  into a million pieces and burned 

    I too having problem with PB stuck at loading screen.
    History:
    My daughter was using PB and youtube app could not play the video,
    I close youtube app, try to start it again,
    PB won't open youtube app, it bring up those last used app screen.
    I try open up different apps and all to the same result (it open up screen with last used app).
    I try restart PB,
    it got stuck at loading screen, and went to sleep after a fews minutes,
    i start again and it just stuck and went to sleep again,
    I hook up power charger, let it charge and turn it on again still stuck at loading screen,
    with power cord connect it does not goes to sleep (i forgot it and it stay on for half a day and the PB get really warm)
    just start browsing the forum
    will try out a few thing when i get home today
    - hold down volume + and - while power on
    - hold down power for a long time
    and anything else i will find then forum from now till then.
    edit:
    will try this, as someone got it
    quote "I forced update on it using desktop software, and I got past welcome page!"

  • Ovi store stuck on loading screen (N8)

    So I have this problem lately. I instaled new ovi store app and it get stuck on loading screen everytime I try to run this app.
    I tried to reinstall it, I tried to reinstal phone soft and ovi store after and nothing changed.
    pls help me with this. I cant use ovi store at all :/  

    Ok guys, I could solve the issue with some easy steps:
    1) First, reset and restore.Do not restore backup because will restore corrupted files at the QT library, hence making the phone not working fine.
    2) Now begin setting up your Nokia account and e-mail. Restart.
    3) SW update now including ovi store. Access OVI store and update again. Restart.
    4) Now, if you access the OVI store it will get stuck on "loading", so do not do it. You need now to connect the phone to your computer and install the support software from OVI SUITE. Then, disconnect and restart.
    5) Now access OVIMAPS on your phone and setup automatic connection with your nokia account. Restart.
    6) Great. You can access OVI STORE now and download whatever you want. You can also use the backup restore if you want but doing so will block some apps from uninstalling.
    Everything is ok now. Have fun ;D

  • I downloaded ios5 an error message 3002 came up now my iphone stuck on loading screen and itunes doesnt recognize my iphone.

    i downloaded ios5 an error message 3002 came up now my iphone stuck on loading screen and itunes doesnt recognize my iphone.
    now my iphone has a blank screen for a couple seconds the loading screen appears then apple re appears.
    A REPEATING CYCLE now i have No PHONE!!!! Help ME PLEASEEEEEEEEEEEEEE

    Try it...
    Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    i´ve done it and worked 100%
    Good lucky

Maybe you are looking for

  • How to enable OCR with Scangear MP under Linux for MG8250?

    Under Linux openSUSE 12.3 I use Scangear MP 1.80 for my Canon PIXMA MG8250. As a scan target (in my German GUI it's "Ziel") I can choose "OCR". But there is no text output, the scan is just saved as a picture. How can I configure Scangear to open the

  • I have absolutely had ALL I CAN TAKE of this $%^&* HP J4500

    Have had the 4500 for 16 months.  Windows 7 on 2 different HP laptops and even tried windows XP on an older HP desktop. DENIED.  1. First 5-6 months I had to uninstall and reinstall the software EVERY SINGLE DAY because of the connectivity issues. Fi

  • Activate problem CS6 master collection with original product key

    Hello, I have an original version of the Adobe CS6 master collection with a original product key. I use this version now or more than one year on my Imac with version Yosemite 10.10.2. The last days i have the problem that my product key is not valid

  • How to set CSS

    Hello every body we can use html in swing components is there any way to set css on html which we use in side the swing components. zerocool

  • Factory method generateRandomCircle: "cannot resolve symbol"

    I have written 2 classes: Point and Circle, which uses Point objects in order to create a Circle object. I have created a factory method for Point, which creates random Point objects and a for Circle, which does the same. "newRandomInstance" works fi