IOS Remote Desktop app and computers connected to SBS 2008--can't get it to work

I can connect directly to the server without a remote resource in the IOS app.
But I'd like to be able to connect to computers in the office like we can through RWW. RWW works fine, but not from my phone. (Yes I can connect to the server and take over computers from the phone but I don't want other people in the office to log
into the server first!).
I can never get the remote resources section in the app to connect. I usually get "Unable to locate any remote resources for the URL". error in the resources section. I've tried a simple "https://remote.domain.com", "https://remote.domain.com:987",
etc.
We have a self-signed certificate. I can't think of anything in the server setup that is anything other than normal.
I can do direct connect using "Remote Desktop Connection" in windows 7. In the remote desktop server settings I just put remote.domain.com and "Ask for password (NTLM)" for the login method. Then on the general tab I have just the
simple computer name and the domain\username. That's all I had to setup to get that to work.
Any suggestions?

Hi Michael,
Thank you for posting in Windows Server Forum.
Have you setup RD Gateway server in your environment? Are you trying to access the RWW through it?
On server side you can choose “Bypass RD Gateway server for local addresses” under RemoteApp manager and check the result.
For more information, you can check below links for detail.
Remote Desktop Client on iOS: FAQ
http://technet.microsoft.com/en-us/library/dn473015.aspx
Getting Started with Remote Desktop Client on iOS
http://technet.microsoft.com/en-us/library/dn473013.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

Got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it

HT4623 Hello! So I have a iPod 5th generation, and I just had a recent update, it was for iOS 6.1.3, and now for some reason, I can't get the iOS 7 update. Could anyone help me?

Hello! So I have a iPod 5th generation, and I just had a recent update, it was for iOS 6.1.3, and now for some reason, I can't get the iOS 7 update. Could anyone help me?

Apple's servers are slammed right now with iOS 7 downloads AND activation requests.
Be patient and try again later.

IOS Remote Desktop App resolves hostname but throws Host is not reachable error.

Hello,
I am trying to use the Remote Desktop app on my iPad running iOS 7.0.2 to connect to a server through our Juniper VPN. When I type the hostname or IP address I get an error that say "Host is not reachable". If I connect through my Mac I have no
problem when on the same VPN. I have looked through all of the setting in Junos Pulse and it is setup to route all traffic through the VPN, and I do not know of anything that would be blocking it on the network end.
Edit: I am connecting to a Windows Server 2008 R2 box with RDP turned on with all types of connections.
Here is the log data for my latest attempt.
[2013-Nov-19 11:23:42] RDP (0): *** Application lauched ***
[2013-Nov-19 11:23:43] RDP (0): Application became foreground application
[2013-Nov-19 11:24:30] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2013-Nov-19 11:24:30] RDP (0): client version: 8.0.24094 on iPad3,4 (iPhone OS 7.0.3)
[2013-Nov-19 11:24:30] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:30] RDP (0): Showing credentials dialog
[2013-Nov-19 11:24:49] RDP (0): Final rdp configuration used: {
    activeUsername = "DOMAIN\\UserName";
    arcTimeout = 1800;
    cacheId = BEBD1725D63BB841;
    configurationVersion = 8;
    console = 0;
    host = "server.mysite.com";
    label = "Server";
    mouseMode = "-1";
    port = 3389;
    soundMode = 1;
    swapMouseButtons = 0;
    type = rdp;
    utilityBar = "-1";
    kCFProxyTypeKey = kCFProxyTypeNone;
[2013-Nov-19 11:24:49] RDP (0): --- BEGIN INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): lo0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2013-Nov-19 11:24:49] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): en0 af=30 (AF_INET6) addr=fe80::66:9d3c:3d77:5cce%en0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=2 (AF_INET) addr=192.168.114.44 netmask=255.255.252.0
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=30 (AF_INET6) addr=fe80::3c11:d7ff:feb2:7a82%awdl0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en2 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=2 (AF_INET) addr=10.100.01.01 netmask=255.255.255.255
[2013-Nov-19 11:24:49] RDP (0): --- END INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): Not using any proxy
[2013-Nov-19 11:24:49] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:49] RDP (0): Resolved 'server.mysite.com' to '10.100.01.01' using NameResolveMethod_Unknown(0)
[2013-Nov-19 11:25:09] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/cftcpendpoint.cpp' at line 242
    User Message : Host is not reachable
[2013-Nov-19 11:25:09] RDP (0): Error message: Host is not reachable(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2013-Nov-19 11:25:09] RDP (0): ------ END ACTIVE CONNECTION ------
Cameron

Hi,
According to the log, your iPad tried to connect the remote server with IP address 10.100.01.01/32. Please check if it is the correct IP address of the server.
Also, please make sure that your iPad can connect to your VPN network successfully and get a valid IP address so that it can remote your internal server.
Thanks.
Jeremy Wu
TechNet Community Support

Have entrourage and want to use Mail. Can't get it to work.

I had a macbook and purchased the Microsoft office for Mac which included Entrourage.
I have now purchased a new macbook Pro and want to begin to use Mail rather than Entrourage.
I have Entrourage on my new computer but i can't get it to transfer my information to the the Mail program
I am on Charter.net at my office and sbcglobal.net at home.
How can i get this to work. I can receive on Mail, but i can't send.

check your outgoing port settings and make sure it's using a specific port and not the default port, also you might want to check to see if it is using SSL, TLS or any other encryption. Verify the setting from your old machine setup.

Hello, i have a Problem. My iTunes wasn't work, so all my Apps and music is away. How can I get the apps and so on back?

i destroy my iTunes and all my data's are away. how can i get back?

Hello. . .
All of the iTunes content are in a folder. . .
For Windows: [Windows HDD]\Users\[Your Username]\Music\iTunes\iTunes Media
For Mac OS X: Music\iTunes\iTunes Media
If they are not there, then there is absolutely no way to recover them.

Can't get or send emails. Network connection is correct. Can't get Safari to work. Home PC is good to go...Any suggestions?

I hate this IPAD! I can't get emails or send them. I have deleted the account and put it back in - didn't work. I can't use Safari, because it says it's not connected to the internet. I have plugged and unplugged the PC and it is working fine - emails in and out and internet up and running. This has happened before and I was successful in getting back up and running. any suggestions

You cannot send or receive emails or visit web pages in Safari because your iPad is not connected to the Internet. They are related problems. From your description of plugging and unplugging your PC, I assume your PC is connected to your router by wire, not by wireless. So that is not going to be a good test of your wireless router, though it is a good test to see that the router is connecting to the Internet. I am, of course, assuming you have a wireless router. The problem could be the wireless setting in your iPad or could be the router itself.
On your iPad, go to Settings.
Is Wi Fi on? If not, turn it on and maybe that's all it needed. Also make sure Airplane Mode is off.
If Wi Fi was already on, click on Wi Fi and see if your router shows up on the list.
Post back here to tell us how it is going.

Users of Windows 7 Computers connected to Domain but can not get Internet Randomly

After crash of DC, I have replaced the domain controller server 2008 with another machine but with same name. I got trust relationship issue, which I resolved by disjoining and rejoining. After this I am facing below mentioned issue on computers randomly.
High Privileges users have no issue with internet access. Low privileges users can not access internet on workstations randomly. Users login properly, all group policy settings applied to them. but internet does not work with them using Internet Explorer
and Google Chrome. All pings work fine. I viewed the proxy settings by command line as proxy settings are disabled for low privileges users. It was correct but still internet was not working. While over Firefox by adding manually proxy(not set
through group policy), internet works.
When I tried to login through a new user which has not logged in over affected machine. Internet works. After logging off by new user and logging on old users (already created profiles), internet starts working for them too. I am afraid may this trick does
not work on other machines.
Now I want to know, if above mentioned trick does not work what should I do to activate the internet. What is the root cause of this issue.

Hi,
Did you mean you set the same proxy, high privileges user could keep connection and low privileges user drop connection randomly? At the same time, Firefox also could keep connection, right?
Please try to reset Winsock and DNS for a test on problematic computer. Open command prompt with Administrator Previleges, then type the following commands.
netsh int reset
ipconfig /flushdns
Besides that, update the network driver for test.
Karen Hu
TechNet Community Support

HT1386 I plug my IPhone up to the usb and click updates before I back phone up and all my contacts music notes ring tones photos Apps and pictures were lost. How can I get them back?

I plug my IPhone 4G to my USB which was plug into my computer I click update before I back my phone up and lost all information that was plug into my phone.
Music, Apps, text message, Photos, Contact List, Notes Pad information. How do I get these Items back or can I?

If you backed up the device, you should be able to recover it from the backup unless you somehow deleted the backup. See if it isn't recognized by iTunes, then restore it from backup.

HT1689 I bought an app and I got charged twice? Can I get the balance back?

I lost almost 10$ from my account. Actually it's for my daughter.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

TS1741 If I only have an iPad and Apple TV 1st gen how can I get it to work

Will I'm trying to use my new iPad as my remote for my first generation cause I keep losing it. I do not have a computer is there any other way to connect them too.

vazandrew wrote:
https://itunes.apple.com/ca/app/remote/id284417350?mt=8
If I'm not mistaken, that is for the Canadian iTunes Store.
If the OP is in the U.S. this should work: https://itunes.apple.com/us/app/remote/id284417350?mt=8

TS3048 I am usng a bluetooth keyboard with my Mac and some of the keys are not working. They are the numbers 1 through 9. I have gone through the troubleshooting for mouse and keyboard and everything looks good. How can I get them to work again?

Hi, I am using a Mac computer that my husband set up. I have worked on it recently with no problems. Today, I am having problems with the bluetooth keyboard not working properly. The numbers 1 through 9 do not work. I have gone through troubleshooting wireless mouse and keyboard issues and everything looks good. Except, when I check the keys on the keyboard viewer, these keys still do not work. The webpage guides me through and at this point I do not know what to do next, because the keyboard is still not working properly. I sure hope there are some experienced people in the community to help me. What should I do?

Hi:
I wish my suggestion had gotten you further.
I do suggest you try to connect the keyboard again. The request for a number is a step in it trying to pair. If it gets by the number, it sometimes takes a little while to get connected. If you are unable to get it connected and want a new one, I have been using Apple Bluetooth keyboards for years - and I like them. The one I have (the newest model) only uses two batteries and is very thin.
Speaking of batteries, if you are not already doing so, you might consider rechargeables. I have a drawer full of them and use a 15 minute charger. I go tired of buying batteries and rechargeables are environmentally friendly to boot. At the moment, I use 2450 mAh Energizers and a 15 minute Energizer charger (all purchased new on eBay at a very reasonable price).
I am far from an iPad "expert," although I have one. If my suggestion below does not help, post your question in a separate thread in the iPad forum.
I had a terrible time syncing my iCal on my Mac with my iPad iCal (confusing - hopefully it makes sense). I quit using iCloud as that added to the confusion. There is a facility to one-time sync items. When you connect your computer to your iPad, iTunes opens. The system begins a process (automatic backup and so on). After it finishes, you can click on "info." At the bottom of the screen, there is an advanced section. You can select any of the items and then force it to sync. The iCal information from your computer would be deposited on the iPad.
After all that, I do not use a Google calendar so the information may be worthless to you.
If you want to reset the iPad to factory settings, you can do that when it is connected to iTunes (one of the options). Me being me, I try never to erase anything.
Barry
Message was edited by: Barry Hemphill

How do I transfer PDF files from PC to IPAD using Itunes 12.1.2. Previous versions let me drag file in Itunes to Ipad and files appeared under Ibook but can't get it to work in latest 12.1.2 version.

How do I transfer PDF files from PC (Windows 7) to IPAD using Itunes 12.1.2. I would like to do files manually rather then auto synch. Previous versions let me drag file in Itunes to Ipad and files appeared under Ibook and then I could move them to an appropriate collection title. The interface appears to have changed in the latest ITunes version and I am not sure what the proper procedure is.

King_Penguin - Thanks it worked perfectly. I had my pdf files copied into ITunes on my PC but when I clicked on a pdf file to copy it I thought the sidebar would appear with my IPAD name and then I would drag it over. I didn't realize that I needed to click-and start dragging it towards the left-hand side for the sidebar to appear. It worked like a charm - THANKYOU!!!

Need help to print in PDF format using Adobe Reader with FireFox and a FileOpen plug-in. Can't get anything to work.

I am trying to print clothing patterns on my printer and they must be in PDF format. I was told I needed Adobe Reader, a FileOpen plug-in, and finally Firefox Plug-in. I downloaded all of this and I still cannot open anything in PDF format. Thank you Bonita Rainey

call the same smartform(Function generated from smartform) in your bsp application, get the otf outof it, convert that to pdf and show it. follow your previous thread and check the blog mentioned there.

I just did an upgrade to the latest version (3.6.15) and after installation and restart of the computer I can"t get Firefox to work. Not sure if this a Firefox problem or something in Windows XP. Can any one help?

Received notice of a new version of Firefox and clicked to receive it. It downloaded and I did the install. After restarting the computer I could not get Firefox to open. Tried to reinstall again and had the same results.

What a waste of space to paste the code.
Why not ask in the iLife > iPhoto forum where your question belongs.

IOS Remote Desktop app and computers connected to SBS 2008--can't get it to work

Similar Messages

Maybe you are looking for