IOS: Restore errors 4005, 4013, and 4014
Facing IP4S always power bling bling also during type text a few miniute back to unlock.
Try Syc and restore BUT error iOS: Restore errors 4005, 4013, and 4014
How did you try to restore?
Try all options described here: iOS: Not responding or does not turn on
If necessary, back up your device try to restore as a new device to factory settings:
See Use iTunes to restore your iOS device to factory settings http://support.apple.com/kb/HT1414
Similar Messages
-
My Ipad air continue to see error 4005, 4013, or 4014 when I try to restore . Although I did all the instructions in the help page , and I changed many computers and I still get same errors . Please help.
Ipad air crushes and stuck in loop of apple logo then blue screen.If you get the same errors on different computer and with different computers then contact Apple : iOS: Restore errors 4005, 4013, and 4014 :
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support. -
If you continue to see error 4005, 4013, or 4014 when you restore your device
i continue to see error 4005, 4013, or 4014 when i restore my Iphone 5
If you get the same errors on different computer and with different computers then contact Apple : iOS: Restore errors 4005, 4013, and 4014 :
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support. -
IPAD 2 Restore errors 4005, 4013
I have tried three different computers ( W7 en W8 ), fresh install itunes on one computer, latest version update on other two, different cables.
After reading some forums:
Running Itunes as administrator.
Also manually downloading ipsw files and with shift key trying to restore from file.
Itunes continually gives errors 4005 or 4013.
Sometimes I get a screen:
(FTL:MSG) APPLE NAND DRIVER (AND) RW
(FTL:MSG) FIL_INIT OK
(FTL:MSG) BUF_INIT OK
(FTL:MSG) FPART INIT OK
read new style signature 0x43313141 ( line:389 )
(FTL:MSG) VSVFL REGISTER OK
(WMR:MSG) METADATA WHITENING IS SET IN NAND SIGNATURE
(FTL:MSG) VFL INIT OK
(FTL:MSG) VFL_OPEN OK
(FTL:MSG) YAFTL REGISTER OK
(FTL:MSG) FTL_OPEN OK
(NAND) _publishServices:642 FTL capabilities: 0x00000000If you are getting the same error codes with different cables and computers then contact Apple, it may have a hardware problem : iOS: Restore errors 4005, 4013, and 4014 :
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support. -
5s 8.1 iOS: Restore errors 4005. Won't update or restore
Hi Guys,
I downloaded the 8.1 update via the latest iTunes and connected my 5s to update.
The update failed and i got the 4005 restore error: iOS: Restore errors 4005, 4013, and 4014
Now when turn on the 5s it just shows the symbol to connect to iTunes.
So I plug in and get this:
I click 'Restore' then get this
So I click 'Restore and Update', then I get Restore Error 4005 again and get stuck in an infinite loop!
I did create a backup yesterday so I'm not worried about any lost data.
I have deleted the update and I'm downloading again now. I will also try with a different USB cable and on a different PC.
Any suggestions or a fix would be much appreciated?
Thanks.Also FYI: The USB cable is a new authentic Apple lighting cable
Okay so I deleted and downloaded the update via iTunes again, plugged in the 5s via USB and still get:
After Restore and Update: 'Extracting software...'
Then:
Then:
Then:
'Extracting software...
Then: Preparing iPhone for install.
Now:
And the 'Connect to iTunes symbol' disappears leaving the screen still turned on but all black.
Then after a few minutes:
Hope that helps... -
My Iphone 5c will not turn on/freezes since I tried to install the new OS on it. I've tried itunes updates and restore but get a string of 4004, 4013 and 4014 messages while trying to correct it. I'm wondering if it's even possibly turning itself off as the system tries to correct. Does anybody have any ideas. My use of the phone is fairly modest and it's not taken any knocks, been around water etc...
Resolve iOS update and restore errors - Apple Support
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
HT201444 I have error 4005 and 4013 and 4014 while restore my I phone . how I fix it ?
I have error 4005 and 4013 and 4014 while restore my I phone 4s and I try all way to solve( downloade last v I tune, change the cable , restart p c ) still not ok
and the work shop not sucssed to solve it also told me the problem is from motherboard (hardware ) and no way to solve it , are they right ?Hi Mary Servis,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are getting an error when restoring the device. I would recommend that you read this article, it may be able to help the issue.
iOS: Restore errors 4005, 4013, and 4014 - Apple Support
Cheers,
Mario -
my iphone is stuck in recovery mode. now almost three weeks in recovery mode. plus error 4005 4013 4014 what is the solution?
Hi there Kiyya,
You may find the information in the article below helpful.
iOS: Restore errors 4005, 4013, and 4014
http://support.apple.com/kb/TS5314
-Griff W. -
HT201444 Error message 4013 and 4005
How can i solve problem with error message 4013 and 4005 in my itunes while connecting my iPhone 4s? I iPhone suddenly shutdown during normal use and could not trun on after this and tried to restore with itunes but didnot worked. I tried with support tips from apple but useless. Can anyone help me to solve this problem. Please...
the posts you write this froum stated that you should
Resolution
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Learn more about updating OS X.
Learn more about updating Windows.
Restore using another USB cable.
Restore your device on another computer.
did you ? -
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
Ok So My Ipod GUbbed just a few mins ago and Idk It just went to AN OLD IOS D: But when i goto restore it to a IPSW I Have of 6.1.3 IT says Error 3194 iv tried everything Help Me D:
See:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore
For the future, saying " iv tried everything " provides us with zero information as to what you did try. -
i keep getting iOS: Restore error 3194 or 'This device isn't eligible for the requested build
The article from which you came provides suggestions. Have you tried all of those, including attempting restore from another computer?
-
IOS: Restore error 3194 or 'This device isn't eligible for the requested build'
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
Is the message I received when I tried to synch my Ipad2 with the MacBook Air. The message also said that both devices are current. So ????? IPad is frozen showing the iTune icon with the charge cable.These instructions should resolve error 3194:
http://support.apple.com/kb/TS4451
If your iPad is in recovery mode, these instructions should help:
http://support.apple.com/kb/HT1808 -
My apple tv shows recovary mode in itune.
when I update it on windows 7 laptop through itune it shows an "restore error of 3194".
What is that error And how can I fix it and use apple tv againThis device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw)below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
I have been installed latest version of iTune is 11.1. And others options also, so your suggestion is not helpful for me. How can I do my iPad 2 for now?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom
Maybe you are looking for
-
Report portlet not shown in public page
Hello, I created a sql based report in a database provider and published it as a portlet. I'd like to place the portlet in a public page so that users don't have to login to see the report content. However, when I tried to do so, the report content c
-
How painting behind a JComponent ?
Hi all, I'm trying to paint stuff like shadows, frames (not borders), etc. behind JComponents. So every shape only intersects with the relative JComponent's one. Cannot paint these stuff in the container's paintComponent() method since more widgets c
-
How do I transfer exchange notes onto Mac IOS 10.9.4?
I'm a student in college and I have a lot of old notes and reminders written on my exchange account with microsoft. These notes are synced up on my phone but they won't sync up to my new MacBook Pro that just recently arrived. My microsoft exchange a
-
OGG Using Colmap and Datenow millisecond.....
Hi i have a problem. i want to put the current time in target table column. table column datatype SQL> desc yyy Name Null? Type COL1 VARCHAR2(30) COL2
-
Keep receiving error when trying to change device on my verizon. Unfortunately, none of the lines on your account are eligible to receive the Online Authorization Code. Unable to change device on account.