IOS Software Image Management

Hi,
I have encouter this problems when I was doing image retreival for certain device.
Attached are the problems faced
Anyone know the cause?

Hi Dave,
If your Goal is to upgarde the IOS of the devices via LMS then MANUALLY download the IOS Image from cisco.com
and use the FILE SYSTEM option to add the Image in the Software Repository
Then try to upgrade the IOS and see how it works.
Thanks
Afroz

Similar Messages

Prime Infrastructure 1.2 - Software Image Management

Good Day,
I have some issues with CPI 1.2. I've tried to Import Images from Cisco.com through Software Image Management
for test purposes by using my credentials. But it has finished success just a twice. Other attempt hadn't any result.
Then I try to choose Image for my test 3750E switch, sometimes I have error message like bellow:
After I choose another image and return to first that I need, and press <Submit>, I have a message that "Image collection job CCO Image Collection Job is Scheduled Successfully":
I wait some time and refresh, but I don't see any new Images. The same problem exist then I try Import Images from connected Devise. I use Shedule Start Time - Now.
Also, I can't view any information about Image in Device Work Center:
Any ideas, guys?

I'm having the same issue. I'm thinking there are still a lot of bugs in PI that Cisco needs to work out. LMS is still the better option for now in managing your switching environment. I know that Cisco hopes to role all device management under the umbrella of PI, but they still have some bugs to workout IMO.

LMS Software Image Management - Telnet failure

Hi all,
I had a problem with Software Image Management for the upgrade of a switch.
It seems that at the end of the upgrade, CiscoWorks was unable to save the configuration with telnet.
Yet, telnet seems to be ok because CiscoWorks manages to connect to the switch at the beginning of the upgrade.
Updating config file during software upgrade processDevice running-config is modified but failed to save the running-config to startup-config.Cause: Could not detect SSH protocols running on the device
TELNET: Failed to establish TELNET connection to 10.1.3.4 -Cause: Authentication failed on device 3 times.
I sent attached the logs of the upgrade.
Thank you in advance.

Hello,
The job fails last night after timeout.
I have reschedule job this morning for 2 switchs :
2960 with telnet and ssh enabled
2960 with telnet enabled only
The device credentials verification job seems to be coherent :
Device Name
Read
Community
Read Write
Community
Telnet
Enable
by Telnet
SSH
Enable
by SSH
1.
switch04-d
Ok
Ok
Ok(Primary Successful)
Ok(Primary Successful)
Failed to connect.
Did Not Try
1.
switch03-d
Ok
Ok
Ok(Primary Successful)
Ok(Primary Successful)
Ok(Primary Successful)
Ok(Primary Successful)
But the job fails again cause telnet authentication failed on device 3 times.
I do not understand why LMS does not use ssh if possible at the finish of the job? Why telnet authentication fails ?
Thanks in advance.

Software Image Management in Prime LMS 4.2.3

In Software Repository Management I have added all the running images from our estate. The Status of each image is showing as "Not Available" even though I get the message "Image Status retrieved from Cisco.com successfully." when selecting Update Status. Should I see something more meaningful here?
Also when I run Patch Distribution I get "Failure" across the board - can anyone suggest a likely reason for this?

Hi Dave,
If your Goal is to upgarde the IOS of the devices via LMS then MANUALLY download the IOS Image from cisco.com
and use the FILE SYSTEM option to add the Image in the Software Repository
Then try to upgrade the IOS and see how it works.
Thanks
Afroz

ASR Software Image Doubt

Hellp Experts,
I was quoting an ASR1004 and I have below options for IOS XR software under Card >> ASR1000-RP1
SASR1R1-AESK9-310S
SASR1R1-AESK9-34S
SASR1R1-AESK9-37S
SASR1R1-AESK9-38S
SASR1R1-AESK9-39S
as I understand, I need to choose one of the above depending on IOS-XR version
Also I see option below option under Managed Services Software
SASR1R1-AESK9-MS
Now I can't understand the difference between the software with "-MS" at the end and the software without it
Those two options are mutually exclusive
We are a managed service provider and this router is for our end customer
Could you tell me which one should I go?
Also find attached file

The first one is warning considering both the images sport feature set of universalk9.
Second one is a genuine error as if the image needs minimum of 64MB of flash, that is due to .tar images are uncompressed and hence need more space.
when you do manually, rather it is supported or not, it may do it irrespective of consequenses.
But in case you want to do it, there is a workaround to modify the image (c3750e-universalk9-tar.150-2.SE2) and manually change minimum space from 64MB to less.
You can go to software image repository from :
Configuration > Tools > Software Image Management > Software Repository
Click on the image and manually change minimum flash and click update. Try to upgrade again.
-Thanks

Cisco Prime 1.2 and image management

Does Cisco Prime 1.2 have the ability to work with image management? I was told yes but I do not see the options and I have verified I have the correct license...

Hi,
Go to Operate > Device work Center > software Image Management
check the below link:
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/user/guide/maint_images.html
Thanks-
Afroz
[Do rate the useful post]

Remote system image management

This is more of an image management than a package management question but the appropriate forum was read-only.
I'm looking into possibly using zen for managing software on an embedded system, but I have some requirements that I would like to know if zen is capable of handling.
The target system is a dual boot linux box. There are 2 bootable partitions, each with a different software version. I need to be able to upload and install a linux boot image to the non-active partition and update grub to allow access to the newly unpacked image. The user can then reboot into the other partition to activate the new software. If there's a problem they can reboot back into the previous version.
We've done this with home grown tools before but there is a desire for better integration with enterprise level management tools.
I'm not set on handling this exactly as described, so if Zen can manage something similar I would be interested in knowing how and would consider adapting our procedure to work with Zen.
Please cc any responses to bruce.edge<at>gmail.com
Thanks
-Bruce

bruceedge,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Lightroom image management - ready for professionals?

Hi
I have a client, which is doing professional gardening photography for various magazines in this topic. Her business ranges from magazine reports about individual gardens to delivering single images to different publishers as requested (for example by flower type, color etc.). The main thing is that her image portfolio isn't organized so much in individual shoots or contracts. An image can be sent to many publishers at any time. She needs to kepp track of this. She needs to know, which image has been published when and where.
Before moving to digital recently, she kept track of here jobs with cumulus, which had more database capabilities, but much less possibilities in image adjustment. Shooting only raw with a Canon 1 series camera, she choosed Lightroom as here image editing and managing tool. Beeing pleased with the friendliness of the user interface and many of its image editing and managing capabilities, she (actually we) are astonished, that even in a version 2 it is still not really possible to keep track of what happens to the images in a professional environment (despite the claim of Adobe that the product is made for professionals).
In essence the program isn't really capable of managing image data, which has a one to many relationship to the image (i.e. the instances of cases an image is sent to a customer). We experimented with virtual copies, which can carry individual metadata, collections (which cannot carry metadata) or storing the required data in the large description field. None of these possibilites were really satisfying. The most promising solution in using virtual copies, ended up in a maintenance nightmare, because it was too easy to forget, where to do which data management (at the master raw file or at the virtual copy).
Then, I learned that with Lightroom 2 there is a possibility to extend metadata, but, unfortunately with the usual limitation of not supporting one to many data (in the SDK-documentation called "spreadsheet type data"). The rest of the SDK documentation did not reveal any other helpful way of solving the problem as the SDK deals mainly with export plugin programming or web stuff, which is of no use to the client. It is rather disappointing that Lightroom's extensibility is still so limited. Where is the programming interface, that allows the development of complete new modules?
Given the slow pace, Lightroom development takes (I can expect that "breakthrough" extensions to the SDK will take even longer), I guess that my client can wait for another 3 or 5 years until anything close to true image management will come up.
So we have to look for some intermediate solutions. Whereas other software (expression media, idimager, cumulus) may have better database capabilities, they lack in raw editing completely and are often more awkward to use. Therefore, I would like to ask the community here, how they handle the tasks described above with Lightroom or with other tools? Perhaps we have overlooked a Lightroom capability?
One thing I thought of is to develop a special keyword hierarchy for contracts, but this also would not allow, all the images tracking needed.
Any ideas? I guess there aren't any plugins, which can deal with one to many data.
Kind regards
Thomas

Actually, we haven't ruled out keywords yet, in fact, at the moment it seems to be the only realistic possibility. However, I wonder if a growing keyword hierarchy can become unwieldy at the end, so I am sceptical, if this idea would deliver.
In general, I think that Lightroom should more move into the direction of beeing a platform for other vendors. The limitation to web stuff and export solutions isn't enough. I hope to see third party vendor modules, eventually one which provides more professional image management and tracking capabilites, exploring the fact that Lightroom has a database underneath it.
I would like to see a DxO raw conversion module or a lens correction module, fields where I think Lightroom and ACR are still not the best in its class (I think LightZone and DxO are the better raw processing engines).
Unfortunately, I do not see Lightroom going much into this direction. Probably this is already too late for the version 3 release, due in 2010 (?), so we need to wait until v4 (in 2012 ?) until the situation improves?
I believe many customers (especially professionals with precious time) need a fully integrated system, which can do image management and image adjustment at the same time. Lightroom is the right platform for it, if Adobe let it be.
Kind regards
Thomas

Offline Image Management

All of the other Digital Asset Management (DAM) software packages that I have used manage offline storage. Some have built-in capability to burn CD/DVD's; others just recognize that it has been done. However, all of them track the offline media by serial number, and allow the user to assign a more friendly name to the disk. This allows one to locate the disk containing an image. Without this, support for offline images is not particularly useful.
So far as I have been able to determine, Lightroom does not provide any capability for this. In particular, when I import images from a CD (leaving them in place), Lightroom recognizes the drive on which the CD is mounted. When I attempt to reference the images later, with the CD unmounted, Lightroom provides the standard Windows dialog box to find a missing file.
Is there some capability for Lightroom to manage offline images that I have not found? If not, has anyone looked into coordinating it with a real DAM package? I like Lightroom's workflow and raw conversion, but I need image management, too.
Thanks,
David

Thanks for that pointer. I have a PC rather than a Mac, but that may be effective on a PC, too.
However, what I'd really like Lightroom to do is integrate with iMatch. It tracks offline images, and names of mountable media (i.e., CDs and DVDs). It also scales very well, and is quite fast.
The problem I have had with iMatch is that it is not integrated into my workflow, and I tend not to enter relevant metadata for my images for relatively long periods of time. Then, of course, I have a lot to do, and it's a chore. If I were able to enter metadata - categories, keywords - in Lightroom, as I process my images, and then easily import that metadata into iMatch, I would be much happier.
I'll look around in the iMatch forum some more. Most of the discussion I saw there looked a little backwards to me - it was about moving images and metadata from iMatch to Lightroom.
David

Make to compile the Petalinux software image, but "returned an error code (127) ;make[1]: *** [pkg_stagefs] Error 255"

Hello,
I am trying ot make to compile the Petalinux software image( make in $PETALINUX/software/petalinux-dist) . Refer to the UG977 PetaLinux SDK Getting Started Guide.pdf
However, when it gets to "[INFO ] Expanding stagefs", there is be an error . How can i do it?
My petalinux was installed in Debian-6.0.6-amd64 OS Host (in VirtualBox on my win7).
Thanks in advance!
Here is my PetaLinux compilation progress output:
$PETALINUX/software/petalinux-dist$ make
[INFO ] Saving previous build.log
[INFO ] Building ucfront tool
[INFO ] Building kernel
[INFO ] Building kernel modules
[INFO ] Building include
[INFO ] Building rootfs
[INFO ] Setting up stage config
[INFO ] Setting up romfs config
[INFO ] Updating for microblazeel-v830-bs-cmp-mh-div
[INFO ] Updating package manager
[INFO ] Expanding stagefs
[ERROR] E: Sub-process /home/focs/petalinux-v2013.04-final-full/software/petalinux-dist/tools/packagemanager/bin/dpkg returned an error code (127)
[00:02] \ make[1]: *** [pkg_stagefs] Error 255
make: *** [subdirs] Error 1

I am seeing the same error.
Environment:
Host PC : CentOS-6.5-x86_64
Xilinx Tools: Vivado 2013.3
PetaLinux Release: 2013.10
Page 11 of The Petalinux Installation guide document shows the packages required for Petalinux installation in the 1st column. I have installed all these packages except libstdc++-4.4.6-4.el6.i686. The only version readily available was libstdc++-4.4.7-4.el6.i686.
http://www.xilinx.com/support/documentation/sw_manuals/petalinux2013_10/ug976-petalinux-installation.pdf
sudo yum install dos2unix iproute gawk gcc git gnutls-devel net-tools ncurses-devel tftp-server zlib-devel flex bison libstdc++-devel.i686 glibc.i686 libgcc.i686
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: centos.mirror.lstn.net
* extras: mirror.ubiquityservers.com
* updates: centos.gravityfish.com
Setting up Install Process
Package dos2unix-3.1-37.el6.x86_64 already installed and latest version
Package iproute-2.6.32-31.el6.x86_64 already installed and latest version
Package gawk-3.1.7-10.el6.x86_64 already installed and latest version
Package gcc-4.4.7-4.el6.x86_64 already installed and latest version
Package git-1.7.1-3.el6_4.1.x86_64 already installed and latest version
Package gnutls-devel-2.8.5-10.el6_4.2.x86_64 already installed and latest version
Package net-tools-1.60-110.el6_2.x86_64 already installed and latest version
Package ncurses-devel-5.7-3.20090208.el6.x86_64 already installed and latest version
Package tftp-server-0.49-7.el6.x86_64 already installed and latest version
Package zlib-devel-1.2.3-29.el6.x86_64 already installed and latest version
Package flex-2.5.35-8.el6.x86_64 already installed and latest version
Package bison-2.4.1-5.el6.x86_64 already installed and latest version
Package libstdc++-devel-4.4.7-4.el6.i686 already installed and latest version
Package glibc-2.12-1.132.el6.i686 already installed and latest version
Package libgcc-4.4.7-4.el6.i686 already installed and latest version
Nothing to do
When I run petalinux-buiild from the project Xilinx-ZC702-2013.3 directory, I see the same error.
$ cd petalinux-v2013.10-final/
$ source settings.sh
PetaLinux environment set to '/home/logic/petalinux-v2013.10-final'
INFO: Checking free disk space
INFO: Checking installed tools
INFO: Checking installed development libraries
INFO: Checking network and other services
$ cd ../Xilinx-ZC702-2013.3/
$ petalinux-build
INFO: Checking component...
INFO: Generating make files and build linux
INFO: Generating make files for the subcomponents of linux
INFO: Building linux
[INFO ] pre-build linux/rootfs/fwupgrade
[INFO ] pre-build linux/rootfs/peekpoke
[INFO ] pre-build linux/rootfs/uWeb
[INFO ] build linux/kernel
[INFO ] update linux/u-boot source
[INFO ] generate linux/u-boot configuration files
[INFO ] build linux/u-boot
[INFO ] Setting up stage config
[INFO ] Setting up rootfs config
[INFO ] Updating for armv7a-vfp-neon
[INFO ] Updating package manager
[INFO ] Expanding stagefs
[ERROR] E: Sub-process /home/logic/petalinux-v2013.10-final/tools/packagemanager/bin/dpkg returned an error code (127)
[ERROR] make[2]: *** [pkg_stagefs] Error 255
[ERROR] make[1]: *** [sub_build_component_/none/packages-repo/single/plnx-repo] Error 2
ERROR: Failed to build linux

Xcode Software Image

I recently purchased a MacBook Air to learn how to make iOS apps, so I of coarse installed Xcode. Because my Macbook air is the new 2013 model, it came preinstalled with Mountain Lion, so my question is, where can I find a copy of the Moutain Lion Image for the Window> Organizer> Software Images tab in xcode.

You can't add a OS X image there. If you have a look at the sidebar, you will see your Mac listed, and there's no "Software Images" for it. That means that Software Images are only for the iPhone, iPad or iPod touch, by adding an iOS upgrade file

Software to Manage Mac Lab

Software to manage Mac Lab
My question derives from this tread
http://discussions.apple.com/thread.jspa?threadID=1725088&tstart=0
I manage a Mac lab at a university, and recently student figured out an admin. password, and I changed the password. (Please see above)
I would like to know if there’s any freeware or really inexpensive software to manage Mac in a computer lab.
What I’m looking for is something like Deep Freeze.
http://www.faronics.com/html/deepfreeze.asp
From what people told me, when you shut down your Mac, Deep Freeze restores everything to what it was. In other words, no matter what kind of changes students make, it always brings Mac back to the initial condition.
If someone can tell me what kind of software is available besides Deep Freeze, it’s really appreciated.
In my Mac Lab, I have 26 Intel iMacs (2.0 GHz) with 10.5.3.
Thanks in advance.

After configuring your workstations how you want, back up one of them to a disk image using SuperDuper!. If some workstation gets compromised again, just wipe it and clone it back from the disk image.
To help make this work it would be better to have your users save their documents on a network drive or in a portable home directory rather than locally on the Mac's internal hard drive. Even better would be to have them bring their own portable media (DVDs, thumb drives, etc) and have them save their own work on them.

Software Images page in Cisco Prime Infrastructure 2.2 broken after installing patches

Earlier today we installed PI 2.2.1 POODLE Fix ( 1.0.0 ) and PI 2.2.1 Maintenance Release ( 1.0.0 ) on CPI 2.2. After reloading we get status 404 when navigating to Inventory > Device Management > Software Images.
Also found this error in Developer tools in Chrome:
Error: Unable to load applications/swim/jsp/ImageRepositoryTable.jsp?id=/ status:404
Does anyone know how to fix this?

Hello,
We are aware of this issue and have bug
CSCut07018 PI 2.2.1 with Device Pack 1 Error on Inventory- > Software Images
filed for the issue. Please keep up with that bug for resolution.
No workaround at this point.

How do I use copyprofile, image manager and create a wim file to Sysprep a reference Windows 8 computer.

Im trying to deploy a reference machine (configured) to other machines (exact or close image) with different hardware.
I have successfully used sysprep in out of the box, generalise, shutdown mode although i havent tried to deploy this to another device. Unfortunately it doesnt copy the profile to default.
I understand that I have to create an answer file using image manager based on that image, save it to a usb drive and attach this in the sysprep command line when sysprepping it.
My problem is I dont know how to easily capture an image of windows 8 into a wim file so that i can add this into image manager to create a answer file. Im also not sure what I have to do in image manager, is it a simple matter of creating and saving
the answer file or do i have to configure it to copy the profile specifically (theres only one account anyhow).
I also want to know if i have to attach the drivers or are all the standard drivers put into the sysprep image as standard. I would like the machine to be an exactly replica, same as doing a clone (but with the drivers for the new machine installed
so it will boot) same as doing a clone and then repair? If thats possible.
Any specific instructions on this would be helpful. I have read the microsft links but they are somewhat confusing.

I know this is a very late response but I thought I'd post for others who search.
The easiest way to create the .wim file is via WinPE, this guy's two YouTube videos explain the entire process in detail -
Windows 8 ADK Part 1: Capture an OS image - https://www.youtube.com/watch?v=XJ8zKX_8E9w
Windows 8 ADK Part 2: Windows Image Deployment - https://www.youtube.com/watch?v=HHIvoqSw_FI
Here's a quick rundown from my notes:
WINPE
Create WinPE via imaging tools command prompt
copype amd64 c:\winpe
makewinpemedia /iso "c:\winpe" "c:\winpe\winpe64.iso"
UNATTEND
Open Windows System Image Manager
Configure unattend.xml
Save unattend.xml to sysprep folder
Create script and save it to sysprep folder to launch sysprep with unattend
@echo off
cd C:\Windows\System32\sysprep
Sysprep /oob /generalize /unattend:C:\Windows\System32\sysprep\unattend.xml
SYSPREP
C:\Windows\System32\Sysprep
Run as administrator
OOBE/Generalize
Shutdown
CONFIGURATION of WINPE
Set IP - netsh int ip set address "Local Area Connection" static 192.168.1.2 255.255.255.0 192.168.1.1
Set DNS - netsh int ip set dns name = "Local Area Connection" source = static addr = 192.168.1.4 validate = no
Map Network Name - net use z:
\\WindowsADK\reflex\images password /USER:domain.local\username
DISKPART
diskpart
list disk
select disk zero
list partition
select partition 2 (OS partition #)
Assign letter=S (assigns drive letter to partition)
Exit
DISM
dism /capture-image /imagefile:z:\image.wim /capturedir:s:\ /name:"Windows 8.1 Custom"
Verify image is saved in the image share (z:)
http://www.microsoftfanboys.com

HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green). My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple

My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green).
My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple Menu. The “Settings” does however displays the General menu allowing me to see:
Apple software: 7.1 (7003)
Apple TV: Model No. A1464, Part No. MD199B/A
Signal Strength shows 5 circles.
It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video. I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2. Can you help please?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

IOS Software Image Management

Similar Messages

Maybe you are looking for