IOS Update via Device Manager - 2960 S and X Series Succeed, Others Fail

Hello,
I am doing a round of IOS updates on a small LAN with a mix of 2960, 2960S, and 2960X switches.  I have been using the built-in Device Manager, selecting the Software Upgrade option on the toolbar.  So far the 'S' and 'X' series switches have upgraded successfully.  The 2960 (WS-C2960-24TC-L) series have thus far all failed. 
With this failing switch type I select the appropriate .tar, as usual, click the Upgrade button, and wait.  In every case the process hangs at step 1. 'Loading the tar file to the switch'.  I am trying to upgrade this failing switch type to 15.0.2-SE7.  The switches to be upgraded are currently at firmware versions ranging from 12.2.(50)SE1 to 12.2(55)SE7.
Is anyone aware of any known issues with this series of switches that may cause IOS upgrades to hang in this fashion?
Thank You,

Please use [ code] tags https://bbs.archlinux.org/help.php#bbcode
like this
or [ quote ] tags instead of [ ins ] tags - that bright yellow if hard on the eyes.

Similar Messages

  • HT201210 iphone 4s stopped in middle of update (via wireless).  apple logo and usb picture appeared on phone. When i plugged in to computer, indidcated I would have to restore. in the middle of restoring, i got a "unknown Error" (1) code and the apple id

    iphone 4s stopped in middle of update (via wireless).  apple logo and usb picture appeared on phone. When i plugged in to computer, indidcated I would have to restore. in the middle of restoring, i got a "unknown Error" (1) code and the apple id and usb picture are frozen on screen. Anyonw know what to do? 

    Hello Maxayla,
    It sounds like you are getting error code 1 when you were attempting a restore. I would use these troubleshooting steps from the following article which mentions that error code:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#1
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • IOS updates via wireless using proxy

    When trying to perform on device (iPad and iPhone) iOS updates via wireless and having a proxy configured, the update request is sent direct and not via the configured proxy. In a corporate enviroment the firewall blocks this request. Any ideas?
    Thanks

    No, the over-the-air method downloads only the incremental changes to save time and system load, while the wired, iTunes, method only does the complete replacement approach.  You cannot control what each does in the way of downloading.
    You might try downloading and saving the file rather than installing, and then make the file available on your server for employees to access rather than download.

  • Syslog via Device Manager

    With three of our 9509 switches we can Export or view the Syslog via Device Manager but on one of them, it prompts for an account. When you input the correct login details you get "Authentication failed"? Tried different accounts same thing?
    Switches running 3.3(1c).

    Hi Roy,
    When you log in via Device Manager, you use SNMP and the SNMP-SERVER USER id.
    When you view the switch resident syslog, Device Manager is going to open a CLI to the switch to do this and
    present the data back in a window to Device Manager.
    This is via SSH or Telnet and uses the username credentials for the same user as was used to open Device Manager.
    If you have "both" SSH and Telent disabled for the switch, then it will just keep prompting you for user and password.
    On Device Manager, check "Security >> SSH and Telnet " and make sure that either SSH or Telnet is enabled.
    You can also test this by trying to open an SSH or Telnet session to the switch and logging in.
    Jim

  • HT4759 I sent Cloude maseeg for my phone to update my device stoped no work And then I want to please open a support device and thank you and I am currently in Cairo, Egypt with me

    I sent Cloude maseeg for my phone to update my device stoped no work And then I want to please open a support device and thank you and I am currently in Cairo, Egypt
    <Edited By Host>

    Not what you want to hear, I know, but this is a user to user forum. No one here has the power to help you.
    You can get information about an order you placed on the Apple Online Store through the Order Status page. If you prefer, you can also get order status or make changes by phone at 1-800-692-7753.
    You can try calling again and if the person you speak to can't help, ask to speak to a supervisor.

  • TS3988 I sent Cloude maseeg for my phone to update my device stoped no work And then I want to please open a support device and thank you and I am currently in Cairo, Egypt with me and I Mobinil SIM and number, 01281081731

    I sent Cloude maseeg for any phone to update my device stoped no work And then I want to please open a support device and thank you and I am currently in Cairo, Egypt with me and I Mobinil SIM and number, 01281081731

    Try this here:
    http://docs.info.apple.com/article.html?artnum=93499
    "Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear"
    And since you are teh savvy about these sort of things, here's Microsofts support article for the drive issue:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;297694
    "New drive or mapped network drive not available in Windows Explorer"
    Good luck

  • 1. Is your service multi-tenant? Can an enterprise manage their users and data independent of other enterprises using their service   or is your service more like a consumer service Do you support any sort of enterprise identity? If so, do you support SAM

    1. Is your service multi-tenant? Can an enterprise manage their users and data independent of other enterprises using their service is your service more like a consumer service ?
    2. Do you support any sort of enterprise identity? If so, do you support SAML, openID or user provisioning APIs?
    3. What level of audit logging do you perform? All read/write of data? Do you support ability for customers to view only their activity logs?
    4. What level of penetration testing do you perform? Is it done by 3rd parties? How often are these tests performed?

    1. Is your service multi-tenant? Can an enterprise manage their users and data independent of other enterprises using their service is your service more like a consumer service ?
    2. Do you support any sort of enterprise identity? If so, do you support SAML, openID or user provisioning APIs?
    3. What level of audit logging do you perform? All read/write of data? Do you support ability for customers to view only their activity logs?
    4. What level of penetration testing do you perform? Is it done by 3rd parties? How often are these tests performed?

  • Just tried to update iPhone 4S to 6.1 and it first of all failed to back up then it failed to update so i had to put it in recovery mode and restore it then it failed to restore starting to think its an itunes issue does anyone have any advice?

    Just tried to update iPhone 4S to 6.1 and it first of all failed to back up then it failed to update (Error 11) so i had to put it in recovery mode and restore it then it failed to restore with an unknown error starting to think its an itunes issue does anyone have any advice?

    if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.

  • Is the data exchanged with the Apple Servers during a manual/itunes ios update any different between a PC and Mac?

    When performing an ios update with an ipsw file, data is exchanged with an apple server to complete the update to the newer ios version.  Without an internet connection to the apple server the update does not complete.
    Can and Apple software engineer please answer if there is anything done differently during this data exchange process between a Macintosh vs a PC?  If not here within the forum, can someone provide me a phone number, email or mail address to contact to get this information?  The answer is very important to the organization that I belong to.
    From a privacy standpoint, I assume the device name and perhaps some other data is submitted to verify the identity of the device being updated but is any personal information submitted like email, contacts or any other data potentially typed by the user sent during the connection to the Apple update server?
    My understanding is that user generated data, settings and apps are handled entirely with the backup file if ones is created?
    Dan

    Apple does not participate in these forums, so you will not get a reply from an Apple engineer, nor will there be any way for you to contact anyone in the iTunes or iOS engineering team.
    I do not, however, think that there is any difference between the Mac and Windows versions of iTunes in what information they transmit to Apple's services. In either version no personal information of any sort is sent when only doing an update to iOS, only to the best of my knowledge the device identification so that the correct update file can be delivered. The only time any of your contacts or any other such information would be sent to Apple's servers is if you are synchronizing via iCloud, and emails only if you use iCloud's email service.
    My understanding is that user generated data, settings and apps are handled entirely with the backup file if ones is created?
    Except for synchronizing with iCloud, that would be correct. This may be of interest:
    http://support.apple.com/kb/HT4865
    Regards.

  • Trying to Download IOS Update via ITunes

    Hi.....I have an IPhone 4. Im not able to download the most recent IOS7.0.6 update via wireless and am trying to update via ITunes.Phone is plugged in to PC.  I have verified that I have the latest version of ITunes. However, when I go to file-devices,  Backup is greyed out and the only option is "Restore from Backup". What am I doing wrong??

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • IOS update via iTunes vs via WiFi

    Just for my curiosity.  What is the difference between updating the iOS with iTunes vs WiFi?
    the reason why I am asking this because I read somewhere that sometime users have issue after the update their iOS over WiFi.  Same user that update to the same iOS via iTunes does not have the same issue.  I am talking about Battery Life, or Wifi Problem, or BlueTooht Issue, or Software Bug.
    It is possibile that there is a minimum differece in software when the updated is maded over the WiFi vs iTunes?
    Thank you

    The OTA updates provides a delta update only while iTunes provided the whole build.
    Some users have issues after installing the whole build with iTunes as well. If there is a problem after installing the delta update OTA, restoring the iPhone with iTunes to install the whole build for the update may resolve the problem.
    I have installed all iOS updates OTA since the option became available and I haven't experienced any problems after doing so yet.

  • CD-ROM error message in Device Manager using Vista and X61s

    My IBM portable CD-ROM has suddenly stopped working.
    The Device Manage throws up a message that reads ' - Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)'.
    I've tried using another CD-ROM with the same results.
    I've also tried deleting the device and re-installing, updating the river to no avail.
    Can anyone tell me haw to fix this in Windows ever life involving Vista?

    Does these help? 
    http://social.msdn.microsoft.com/Forums/en-US/windowscompatibility/thread/cbbfde77-4def-4abb-8dd0-12...
    http://barugon.wordpress.com/2008/08/01/windows-cannot-load-the-device-driver-for-this-hardware-the-...
    http://en.kioskea.net/faq/sujet-1215-driver-damaged-or-missing-code-39
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Just updated via the creative cloud app and now lightroom won't even load.

    As the title states:
    I've just updated via creative cloud app, ran lightroom from the standard shortcut on m desktop and got 5.7. Exited that and tried to run from the new shortcut. No load.
    Thought it might be to do with still having 5.7 installed, so uninstalled that via creative cloud app and it still wouldn't load. Noticed that the creative cloud app still showed lightroom as being installed (5.7 had disappeared on first uninstall). Selected uninstall again and this time it went from the installed section of the app to being an option to install.
    Installed new version and it won't load.
    Could someone please advise how to resolve this as I would like to be able to access my files and the changes I made.
    Thankyou in advance,
    Matt

    Moderator:
    Please note. The solution posted to sign out of and back into creative cloud app appears to have worked
    I didn't see that before writing this post.

  • Download issues with ios update.  device hung up mid upload.  any suggestions?

    i downloaded the new ios update today.  Device has hung up mid download.  Now I can't turn ff or reboot the device.  Or finish the download.  Any thoughts?

    Did you already try to connect in recovery mode, explained here?
    If you can't update or restore your iOS device

  • Unknown device in device manager with gx620 and win xp64

    I am having a problem with my new msi gx620 which i have installed windows xp 64 bit on. The problem is that there is an unknown device in the device manager.
    The location of the device is on Intel(R) ICH9M LPC Interface Controller - 2919
    the Device Instance ld is:
    APCI\ENE0100\4&FF861E6&0
    i have tried to install the xp drivers avalible for the gx620 here on this site but note of them seems to fix the issue.

    google lead me to this and belief ints an infra red port
    http://vip.asus.com/forum/view.aspx?board_id=3&model=X55Sv&id=20080704205520750&page=2&SLanguage=en-us

Maybe you are looking for