IOS upgrade for ACE10-6500-K9

Dear All,
I have ACE10-6500-K9 installed in 6513 core switch with below mentioned sh version.
Software
  loader:    Version 12.2[121]
  system:    Version A2(2.0) [build 3.0(0)A2(2.0)]
  system image file: [LCP] disk0:c6ace-t1k9-mz.A2_2_0.bin
  installed license: ACE-08G-LIC ACE-SSL-05K-K9
Software
  loader:    Version 12.2[121]
  system:    Version A2(2.0) [build 3.0(0)A2(2.0)]
  system image file: [LCP] disk0:c6ace-t1k9-mz.A2_2_0.bin
  installed license: ACE-08G-LIC ACE-SSL-05K-K9
I want to know that can i upgrade ACE10-6500-K9 to c6ace-t1k9-mz.A5_1_0 i.e version5 ? I tried to search cisco website but could not get proper upgrade or user guide.
Please help.
Thanks & Regards
Ahmed...

Hello Ahmed,
Unfortunately version 4.x and version 5.x are only supported on the latest hardware ACE30 . The latest version available for ACE10/ACE20 is A2 (3.5).
HTH
Pablo

Similar Messages

  • IOS Upgrade for Dual Sup720 RPR+

    Where can I find the procedure for upgrading the IOS image on a 6500 switch configured with RPR+ with dual sup720's?

    Hi,
    The procedure can be found here:
    http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm#wp77819
    HTH,
    Bobby
    *Please rate helpful posts.

  • IOS Upgradation for 6506E

    Hi everyone,
       we are using 6506E switch in our Datacenter. we are planning to upgrade the new cisco suggested release for the  core switch.
    At present we having "IP services 12.2(12A) version" this software gone for EOD.
    we are going to upgrade to 12.2 to 15.2 version. we are having the supported Dram and Flash for the 15.2 IOS. Can we proceed the Same? or else we go with the 12.X series latest edition ios?

    Can we proceed the Same? or else we go with the 12.X series latest edition ios?
    Due to the complexity of the "location" of the chassis, no one is going to "recommend" what IOS you should/shouldn't go to. 
    It is your responsibility to read the Release Notes and do further research and testing before jumping to a conclusion suited for the nature of YOUR network.

  • HT4972 Where can I get an iOS upgrade for my I pad 2 with iOS ?

    I have looked in settings and on the iTunes store for an upgrade to iOS 5, does anyone know where to get this?

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • Can i purchase an ios upgrade for ipod touch running ios 3.1.3 to a ios that will allow kindle to run

    is it possible to upgrade via apple ios 3.1.3 on a ipod touch to a ios that will allow kimdle app to run,or do i give up

    If you have a 1G iPod, no. those can only go to 3.1.3. To identifty yours:
    Identifying iPod models
    The 1G does no have an internal speaker of bluetooth.

  • Lost iTunes purchased music after latest IOS upgrade

    After the automatic IOS upgrade for the Apple Watch my iTunes account lost several purchased albums.  I have tried to re-download the purchased music but not successfully, I'm only able to download four of the songs and they are still not showing up in my iTunes library.

    For info these are user-to-user forums, you are not talking to Apple nor iTunes Support.
    If they don't show in the Purchased tab in the iTunes Store app on your iPhone and iPad then check to see if they are hidden : iTunes Store: Hiding and unhiding purchases.
    If you've moved countries since buying them, or if the rights-holder has removed them from the store, then you won't be able to redownload them. Also if the rights-holder has removed an album and replaced it with a different version then it be treated as a different album/purchase.

  • Aironet 1300 AG IOS upgrade

    could somebody give me a doc with the steps to perform an IOS upgrade for the APs
    thank you

    Hi Cris,
    Working with Software Images
    This section describes how to archive (download and upload) software image files, which contain the system software, IOS code, radio firmware, and the web management HTML files.
    Cisco IOS Software Configuration Guide for Cisco Aironet 1300 Series Outdoor Access Point/Bridge 12.3(7)JA
    http://www.cisco.com/en/US/docs/wireless/access_point/1300/12.3_7_JA/configuration/guide/b37mfw.html#wp1035507
    Hope this helps!
    Rob

  • I made the upgrade for ios 6 and now my ipod 4G touch open and close instantly for one hour still now

    Hello
    when i made the upgrade for my iPod touch 4g 32 Go
    ios 6
    now i cannont do anything it is close

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I downloaded the new iOS 6 for my iphone 4.  I have 2 iphones on my account and after the "upgrade" text messages go to both phones.  When I send a text to my wife I recieve the same text and vise versa.  How can I fix this?

    I downloaded the new iOS 6 for my iphone 4.  I have 2 iphones on my account and after the "upgrade" text messages go to both phones.  When I send a text to my wife I recieve the same text and vise versa.  How can I fix this?

    "Sounds like you guys are using the same apple id for imessage.   You will need to create a separate id for you wife.  OR go to settings - message - receive&send and make sure your phone number is the default for both you and yoru wife.

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • Help Setting Up A Cisco Lab For IOS Upgrade?

    Hi.
    I've collected quite a few routers and switches over the past few months that have what seems to be corrupted or no IOS. I have a small lab set up to test parts, and I was wondering how I can network them in such a way where I have an active functional network (for testing purposes, not for actual internet use), that I can connect routers or switches to and upgrade or change the IOS version.
    I have all the hardware and cabling needed, and I have the Cisco IOS software for the routers I need, I've just never upgraded or changed an IOS on a router or switch before.
    I have:
    a Cisco 7505 with an RSP4+, 256MB RAM, 16MB Flash, and it's full of the modules that hold the PA cards (I forget what it's called, but I just use it to throw PA cards in to test 8 at a time).
    A Cisco 3450 (I believe, 3400 series anyhow) that I believe is 64/16, that again I use for testing.
    Two Cisco 2621 64/16, for testing WIC's, VWIC's and NM's.
    Two Cisco 2950 series switches, one I'd like to use to actually connect to my LAN already implimented seperatly, and one to connect to this mini lab LAN.
    So again, I'm wondering how I can set these up on a small LAN just for testing purposes and so I can just connect a device and upgrade it's IOS. I also need information about the TFTP server and all of that as I haven't been able to find out much info on it.
    Thanks in advance for any help :).

    Hi
    First of all make sure that the flash is enough for IOS you are loading.Here is guide for loading IOS.
    (1)Download and install tftp server from www.solarwinds.net
    (2)Give IP on ethernet port of router
    (3)Give IP on computer which should be in same subnet that of router
    (4)Follow the following steps:
    Router#copy tftp: flash:
    Address or name of remote host []? 192.168.1.67
    Source filename []? c1700-k9o3sy7-mz.122-15.T9.bin
    Destination filename [c1700-k9o3sy7-mz.122-15.T9.bin]?
    Accessing tftp://192.168.1.67/c1700-k9o3sy7-mz.122-15.T9.bin...
    Erase flash: before copying? [confirm]
    Erasing the flash filesystem will remove all files! Continue? [confirm]
    Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
    Erase of flash: complete
    Loading c1700-k9o3sy7-mz.122-15.T9.bin from 192.168.1.67 (via FastEthernet0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    [OK - 9190488/18380800 bytes]
    Verifying checksum... OK (0xF7C5)
    9190488 bytes copied in 129.664 secs (71244 bytes/sec)
    (5)Reboot and your new IOS is ready.
    Regards
    JD

  • With the new upgrade to iOS 7 for the iPhone, is there anyway to change the background on the calendar?

    With the new upgrade to iOS 7 for the iPhone, is there anyway to change the color background on the calendar? 

    There are, however, lots of calendar apps in the App Store. They will used th same data as th built in app and sync just the same way. Many of them are quite customizable or, at least have different backgrounds. Some that I like are Week Cal, Fantastical, Cal, Tempo.
    Best of luck.

  • How do I get iOS 5 upgrade for my iPad?

    How do I get iOS 5 upgrade for my iPad?

    Update it from iTunes on a computer as described at the bottom of this article; devices running an iOS version prior to 5.0 can't be updated straight from the device. It will be updated to the newest iOS release supported by the device’s hardware.
    The third generation iPod touch and original iPad can’t be updated past 5.1.1.
    (86067)

  • I made upgrade for IOS to 7.04 but my iphone is second hand and when iphone need to make activation ,i don't have the apple ID so my iphone didn't work from this time so please help me urgent

    I made upgrade for IOS to 7.04 but my iphone is second hand and when iphone need to make activation ,i don't have the apple ID so my iphone didn't work from this time so please help me urgent.

    There isn't one.
    amrzaky wrote:
    I can't contact with previous owner s i need another solutoin
    The Apple ID and Password that was Originally used to Activate the iDevice is required.
    If you cannot get this information from the seller
    Removing a device from a previous owner’s account
    You need to return the Device for a refund, as you will not be able to re-activate it.

  • I cant upgrade my new ipad to the ios6 dont knkow why and whats the problem and i was alo trying to   do the update simolteniously for infinity blade which i stoped in between as it crashed the ios upgrade   once hence tryed it again it went half way but

    i cant upgrade my new ipad to the ios6 dont knkow why and whats the problem and i was alo trying to
    do the update simolteniously for infinity blade which i stoped in between as it crashed the ios upgrade
    once hence tryed it again it went half way but it didnt work at all and i am trying to do it from the
    India..

    bnjr86 wrote:  There have been times when I've walked in there, that I really don't want to deal with VZW anymore and just take my business elsewhere.
    I  wonder if another provider would really be much different?  Read some of the other carrier forums - seems to be the same story everywhere.
    I'm not disagreeing with you - I've found that I am usually more informed about Verizon policies and procedures than some of the reps in our local store.

Maybe you are looking for

  • Problem in embedding view

    Hi, I have view container being dynamically generated . My requirement is to embed a standard view in it at run time. Please help me out. Thanks&Regards, Narendra N Shukla

  • How to enhance the standard search with custom field?

    Hi all, I would like to know the general optimal procedure to enhance the standard searches like Opportunity search or Lead search. I've gone through some of the threads here. Some suggest, to add the new field using AET and copy the IMPL class of th

  • Having problems connecting my xbox one to my aiport Extreme.

    Asked for public (static) IP's from my ISP and then got directed to Apple then Mircosoft. Having a lot of problems just trying to connect for my xbox live. More details: i live in an apartment complex that provides my internet through a jack in the w

  • Service Number/Port Number in HTTP receiver adapter

    Dear Experts, I have a scenario where I am to do HTTP Post to a 3rd party web application via a url in the following format: https://x.y.info/abc/sap/customer.cgi The HTTP Post data is submitted to the CGI script which is then processed further by th

  • Logical Data base MSM vs Material master table MARA/MARC

    Hi Experts, What is the different between the logical data base (LDB) and the normal SAP table, for example MSM vs MARA/MARC/MBEW table.  ? I mean we usually refer data to the normal SAP table in download or ABAP, what is the use of logical data base