IOS XRv Crashes on booting.

Hi Guys I have tried all versions of IOS-XRv for Virtual Box and VMware, but in both cases the IOX-XRv crashes as soon as it boots.
with the following error:
Section:idt offset:0x0000006c
  base:fed155b4
Section:pgdir offset:0x00000070
  Page Directory 0000d000
System page at phys:00012000 user:fed12000 kern:fed14000
Starting next program at vfe42599c
Missing reboot reason information. Reboot reason will be derived from Kernel signal code !!!
Writing crashinfo
Exception at 0xfea8f35a signal 5 c=2 f=0
Active process(s):
                 CR0 #         0x8004003b
                 CR2 #                  0
                 CR3 #             0xd000
                 CR4 #              0x2d0
                 DR0 #                  0
                 DR1 #                  0
                 DR2 #                  0
                 DR3 #                  0
                 DR6 #         0xffff0ff0
                 DR7 #              0x400
          GDTR limit #              0x13f
   GDTR base address #         0xfed15474
                LDTR #               0xa0
          IDTR limit #              0x70f
   IDTR base address #         0xfed135b4
                  TR #              0x100
Dumping kernel printf messages
Writing crashinfo done!
Writing x86 kernel core file

hello - I have just moved your post to the Topic forums - you had posted your question in an obscure, non-visible, promotional community.  Hopefully our community users will see your question now

Similar Messages

  • IOS XRv VM not booting

    I am trying to setup a lab with XRv VMs. I downloaded the VMDK files, setup a dedicated ubuntu 12.04 server with KVM installed and followed the installation guide.
    When I boot the VM it starts the boot process until it gets to the following error messages:
    Jul 31 07:39:00.127: Install Setup: Booting with committed software
    Jul 31 07:39:00.137: Install Setup: Install Setup (pid 237601) has failed to prepare this node successfully and will now exit: (2952434198) 'Subsystem(8181)' detected the 'fatal' condition 'Code(9)': Invalid argument
    PID 237601: _dl_abort. libdscapi.dll:dllmgr: Dll not in proper format libdscapi.dll [/pkg/lib/libdscapi.dll] err_str [No such file or directory]
    after a few minutes of  wait there is a crash dump:
    Writing crashinfo
    Exception at 0x809244f signal 5 c=2 f=0
    Active process(s):
    CR0 # 0x8004003b
    CR2 # 0x40d7ffc
    CR3 # 0xfea9fc0
    CR4 # 0x2f0
    DR0 # 0
    DR1 # 0
    DR2 # 0
    DR3 # 0
    DR6 # 0xffff0ff0
    DR7 # 0x400
    GDTR limit # 0x13f
    GDTR base address # 0xfed1849c
    LDTR # 0xa0
    IDTR limit # 0x70f
    IDTR base address # 0xfed165dc
    TR # 0x100
    Dumping kernel printf messages
    Writing crashinfo done!
    Writing x86 kernel core file
    ENTER get_kernel_end
    Getting kernel end success: 0xad3000 rc = 0
    Heap start = 0xe0000000 Heap End = 0xfe400000Checking heap num_seg = 0
    Total number of segments found 22
    Writing heap elf header
    Done writing heap elf headers
    compress failed
    ERROR dumping ker_text_data
    Writing kernel core file failed
    REGISTER INFO
    EDI ESI EBP EXX
    R0 28000007 1000c0b8 040faf94 fe3dccd0
    EBX EDX ECX EAX
    R4 00000000 0819c445 080cff40 08195e1e
    EIP CS EFL ESP
    R8 0809244f 000000f3 00001216 040faf30
    SS
    R12 000000fb
    Control Registers
    CR0 # 0x8004003b
    CR0 # 0x8004003b
    CR2 # 0x40d7ffc
    CR2 # 0x40d7ffc
    CR3 # 0xfea9fc0
    CR3 # 0xfea9fc0
    CR4 # 0x2f0
    CR4 # 0x2f0
    Debug Registers
    DR0 # 0
    DR0 # 0
    DR1 # 0
    DR1 # 0
    DR2 # 0
    DR2 # 0
    DR3 # 0
    DR3 # 0
    DR6 # 0xffff0ff0
    DR6 # 0xffff0ff0
    DR7 # 0x400
    DR7 # 0x400
    GDTR limit # 0x13f
    GDTR limit # 0x13f
    GDTR base address # 0xfed1849c
    GDTR base address # 0xfed1849c
    LDTR # 0xa0
    LDTR # 0xa0
    IDTR limit # 0x70f
    IDTR limit # 0x70f
    IDTR base address # 0xfed165dc
    IDTR base address # 0xfed165dc
    TR # 0x100
    TR # 0x100
    STACK TRACE
    #0 0x0
    Calling platform_kd_reboot ...
    and the VM reboots. What am I doing wrong?

    hello - I have just moved your post to the Topic forums - you had posted your question in an obscure, non-visible, promotional community.  Hopefully our community users will see your question now

  • IOS 6 Crashes after moving Icons

    Anyone else noticed that after dragging an app icon around various pages that IOS 6 crashes and reboots ?

    The problem is software related and has to do partially with a kernal panic and way the cpu access the data. Some users have found the using reset all settings works and some users are finding that only restoring their phone works to stop the phone from going into a springboard reboot loop. It is definetly something that Apple is well aware of and is trading out handsets that have these problems, even though it is not a hardware issue or defect that cannot be solved.
    Research I have done into this problem has shown that the problem is partially related to how much data the cpu is going through and how hot the device has become. If you are having any springboard boot related issues take your phone out of its case and allow for the phone to cool down to normal temperture (powering down is highly recommended, but some people cannot live without their phone being on) before you start to mess around with your phone again. The way that iOS 6 uses the Springboard is different than iOS 4 and partially different than 5 that system messages and notifications were taken out of Springboard control and are part of their own processes. The gpu and cpu both have to render the moving of apps and incoming email, messages and any other notifications. Allowing for your iPhone/iPad to cool down will do wonders for all of the Springboard related issues.

  • MBP 2010 8gb ram Crashing on boot

    I have tried to upgrade my 2010 13" MBP with the 8gb 1333 DDR3 corsair. I did this once already with my 2009 15" MBP and worked just fine without any problems. I have read many success stories for upgrading a 2010 13" with the exact same ram and it's begining to frustrate me because i can't figure out if it's hardware or software with the computer. I did try the new ram in 15" just to make sure the ram wasn't bad and it booted just fine. Back to the 13" it will either simply crash on boot and have a error messae wich i can try to add a link to later but i did get this crash report (see below) after i put in the old 2gb sticks running at 1033. But it will either simply crash or i will get the grey apple logo and the spinner will start spinning for about 10 seconds than freeze. I let it sit for about 10-20 minutes multiple times to see if it just needed to think but it didn't progress pass that. i've also tried just using one of the single sticks instead of having both in and that didn't help either. tried reseting pram and enter safe mode but both attempts ended in it crashing the same way. I also tried using a different harddrive from another 13 macbook that had Snow lion on it thinking that something rooted on the 13" MBP operating system was causing it not to boot properly with the ram, that also didn't work. I am up for any suggestions. Thank you - D
    Interval Since Last Panic Report:  152 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    A57408DC-841D-406F-8FF9-380E4C3B6437
    Sun Apr  8 17:18:12 2012
    panic(cpu 0 caller 0x2a0663): "Spinlock acquisition timed out: lock=0x45d85e0, lock owner thread=0x2000, current_thread: 0xd2873d4, lock owner active on CPU 0xffffffff"@/SourceCache/xnu/xnu-1504.15.3/osfmk/i386/locks_i386.c:374
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x7bafb7c8 : 0x21b837 (0x5dd7fc 0x7bafb7fc 0x223ce1 0x0)
    0x7bafb818 : 0x2a0663 (0x59ccb0 0x45d85e0 0x2000 0xd2873d4)
    0x7bafb858 : 0x279ec7 (0x45d85e0 0x1 0x849088 0x7b946c1c)
    0x7bafb898 : 0x272ba8 (0xd8ab280 0xe60000 0x0 0xa50)
    0x7bafbab8 : 0x274fbb (0xd8ab280 0xe60000 0x0 0x8000)
    0x7bafbb98 : 0x5601ff (0x2fdb520 0x11e60000 0x1 0x7bafbc34)
    0x7bafbc58 : 0x56052a (0xd74bf00 0x0 0x2ed05005 0x1)
    0x7bafbc78 : 0x7b9898e2 (0xd74bf00 0x0 0x200 0x0)
    0x7bafbd28 : 0x7b989b1d (0x5f8ee4 0xe000002 0x7bafbec4 0x0)
    0x7bafbd48 : 0x30d6a4 (0xe000002 0x7bafbec4 0x0 0x2ed05)
    0x7bafbdd8 : 0x2ff592 (0x7bafbdfc 0x3 0x7bafbe28 0x58a167)
    0x7bafbe28 : 0x2f45e1 (0xd8a8784 0x7bafbec4 0x0 0x7bafbf54)
    0x7bafbe78 : 0x49f5f9 (0xd67ef60 0x7bafbec4 0x0 0x7bafbf54)
    0x7bafbf18 : 0x49fd75 (0x7bafbf54 0xd67ef60 0x11e60000 0x1)
    0x7bafbf78 : 0x4f82fb (0xd649540 0xce82e28 0xce7d134 0x1)
    0x7bafbfc8 : 0x2a251d (0xce82e24 0x0 0x2a17ab 0xce82e24)
          Kernel Extensions in backtrace (with dependencies):
             com.apple.iokit.IOStorageFamily(1.6.3)@0x7b97b000->0x7b993fff
    BSD process name corresponding to current thread: fsck_hfs
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: MacBookPro7,1 (Mac-F222BEC8)
    System uptime in nanoseconds: 30863821997
    unloaded kexts:
    (none)
    loaded kexts:
    com.apple.driver.AppleUSBTCButtons          201.6 - last loaded 1982567428
    com.apple.driver.AppleIRController          303.8
    com.apple.driver.AppleUSBTCKeyEventDriver          201.6
    com.apple.driver.AppleUSBTCKeyboard          201.6
    com.apple.driver.AppleUSBCardReader          2.6.1
    com.apple.iokit.SCSITaskUserClient          2.6.8
    com.apple.iokit.IOAHCIBlockStorage          1.6.4
    com.apple.BootCache          31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleAHCIPort          2.1.7
    com.apple.driver.AirPortBrcm43xx          423.91.27
    com.apple.driver.AirPortBrcm43224          428.42.4
    com.apple.driver.AppleFWOHCI          4.7.3
    com.apple.iokit.AppleBCM5701Ethernet          3.0.5b8
    com.apple.driver.AppleUSBHub          4.2.4
    com.apple.driver.AppleUSBEHCI          4.2.4
    com.apple.driver.AppleUSBOHCI          4.2.0
    com.apple.driver.AppleHPET          1.5
    com.apple.driver.AppleRTC          1.3.1
    com.apple.driver.AppleSmartBatteryManager          160.0.0
    com.apple.driver.AppleACPIButtons          1.3.6
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.3.6
    com.apple.driver.AppleAPIC          1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
    com.apple.security.sandbox          1
    com.apple.security.quarantine          0
    com.apple.nke.applicationfirewall          2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
    com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
    com.apple.iokit.IOBluetoothFamily          2.4.5f3
    com.apple.driver.AppleUSBMultitouch          207.7
    com.apple.iokit.IOUSBHIDDriver          4.2.0
    com.apple.iokit.IOUSBMassStorageClass          2.6.7
    com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily          1.6.1
    com.apple.driver.XsanFilter          402.1
    com.apple.driver.AppleUSBMergeNub          4.2.4
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOAHCISerialATAPI          1.2.6
    com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
    com.apple.driver.AppleFileSystemDriver          2.0
    com.apple.iokit.IOAHCIFamily          2.0.6
    com.apple.iokit.IO80211Family          320.1
    com.apple.iokit.IOFireWireFamily          4.2.6
    com.apple.iokit.IONetworkingFamily          1.10
    com.apple.iokit.IOUSBUserClient          4.2.4
    com.apple.driver.AppleMCP89RootPortPM          1.11
    com.apple.iokit.IOUSBFamily          4.2.4
    com.apple.driver.NVSMU          2.2.7
    com.apple.driver.AppleEFIRuntime          1.4.0
    com.apple.iokit.IOHIDFamily          1.6.6
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.TMSafetyNet          6
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          289
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform          1.3.6
    com.apple.iokit.IOPCIFamily          2.6.5
    com.apple.iokit.IOACPIFamily          1.3.0
    Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Serial ATA Device: FUJITSU MHY2080BH, 74.53 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898, 7.8 GB
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0x24600000 / 2
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0x26100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06600000 / 4
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8213, 0x06610000 / 5
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x06500000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0236, 0x06300000 / 2

    I know that it says that it likes 1033 but..... when i had read around to upgrad my 15" people said it would work and would just clock the ram speed down from 1333 to 1033. I installed it and to a shocking suprise it didn't even clock it down to 1033. My frustration is that this 13" MBP is a year newer and isn't even wanting to boot with the ram. I would assume, and be glad with it booting and just clocking the RAM down. i wouldn't see why that wouldn't be a problem. Thank you though for youru suggestion.  Thanks - DJ

  • IMovie on iOS 8 crashes whenever I try to export the video project to iTunes

    I need to transfer several iMovie projects from iPad to iMac to free lots of disk space.
    But whenever I atempt to export an iMovie project to iTunes, the iMovie iOS app crashes.
    Is there any other way how to transfer the project file?

    I'm sorry, but it still doesn't work. I deleted all Apple software off my computer and redownleaded the latest version of iTunes, but when I tried to sign in I still got this error:
    Source
    iTunes
    Summary
    Stopped working
    Date
    1/11/2012 4:15 PM
    Status
    Report sent
    Description
    Faulting Application Path:          C:\Program Files (x86)\iTunes\iTunes.exe
    Problem signature
    Problem Event Name:          BEX
    Application Name:          iTunes.exe
    Application Version:          10.5.2.11
    Application Timestamp:          4ee0844d
    Fault Module Name:          MSVCR80.dll
    Fault Module Version:          8.0.50727.6195
    Fault Module Timestamp:          4dcddbf3
    Exception Offset:          00026b72
    Exception Code:          c000000d
    Exception Data:          00000000
    OS Version:          6.1.7601.2.1.0.768.3
    Locale ID:          1033
    Additional Information 1:          efd8
    Additional Information 2:          efd88cbfd00a9ce0b0d647b39da62ec8
    Additional Information 3:          8aaa
    Additional Information 4:          8aaa4df80c1c69cc54d9f7ecd1699852
    Extra information about the problem
    Bucket ID:          2632024235
    Any suggestions?

  • Yosemite crashes on boot after upgrading from lion

    Downloaded Yosemite and installed - it then crashes on boot about 10 - 15% through (with Apple logo). Have restored Time Machine twice. *** is the problem? 2011 Mac Mini with zero third party software, thing gets bored daily just web browsing, playing music, and storing pictures... can Apple please produce some decent software for a change? Any solutions would be gratefully received

    The next time the problem happens, note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t  post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

  • IOS-XRv and HSRP: Supported?

    Hey gang -
    I'm building a virtual lab within a KVM hypervisor, and it includes 2 XRv images tied together across a VM switch image (Arista vEOS, but that's unimportant).  The L2 connectivity is clearly there between the two routers:
    RP/0/0/CPU0:r2#show cdp neighbors gigabitEthernet 0/0/0/6
    Fri Apr 17 10:49:07.505 UTC
    Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
                      S - Switch, H - Host, I - IGMP, r - Repeater
    Device ID       Local Intrfce    Holdtme Capability Platform  Port ID
    r1                    Gi0/0/0/6        149     R          IOS XRv S Gi0/0/0/6
    And HSRP is able to sync up appropriately between the two of them:
    RP/0/0/CPU0:r2#show hsrp br
    Fri Apr 17 10:46:32.806 UTC
    IPv4 Groups:
                            P indicates configured to preempt.
                            |
    Interface      Grp  Pri P State   Active addr     Standby addr   Group addr
    Gi0/0/0/6         1 100 P Standby 172.17.0.242    local          172.17.0.241
    IPv6 Groups:
    However, r2 (the secondary) can't ping the HSRP IP at all.  It can ping the buddy router's IP address, but not the HSRP one:
    RP/0/0/CPU0:r2#ping 172.17.0.242
    Fri Apr 17 10:51:30.635 UTC
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 172.17.0.242, timeout is 2 seconds:
    Success rate is 100 percent (5/5), round-trip min/avg/max = 9/17/19 ms
    RP/0/0/CPU0:r2#ping 172.17.0.241
    Fri Apr 17 10:51:32.595 UTC
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 172.17.0.241, timeout is 2 seconds:
    Success rate is 0 percent (0/5)
    The primary router can ping the HSRP IP though:
    RP/0/0/CPU0:r1#ping 172.17.0.241
    Fri Apr 17 11:32:32.679 UTC
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 172.17.0.241, timeout is 2 seconds:
    Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
    Further, the switch VM that the two XRv routers are connected to can ping both of their IPs on Gig0/0/0/6, but can't ping the HSRP IP:
    #ping 172.17.0.242
    PING 172.17.0.242 (172.17.0.242) 72(100) bytes of data.
    80 bytes from 172.17.0.242: icmp_req=1 ttl=255 time=17.0 ms
    80 bytes from 172.17.0.242: icmp_req=2 ttl=255 time=19.0 ms
    80 bytes from 172.17.0.242: icmp_req=3 ttl=255 time=21.8 ms
    80 bytes from 172.17.0.242: icmp_req=4 ttl=255 time=22.6 ms
    80 bytes from 172.17.0.242: icmp_req=5 ttl=255 time=23.3 ms
    --- 172.17.0.242 ping statistics ---
    5 packets transmitted, 5 received, 0% packet loss, time 71ms
    rtt min/avg/max/mdev = 17.024/20.790/23.366/2.406 ms, pipe 2, ipg/ewma 17.794/19.066 ms
    #ping 172.17.0.243
    PING 172.17.0.243 (172.17.0.243) 72(100) bytes of data.
    80 bytes from 172.17.0.243: icmp_req=1 ttl=255 time=17.2 ms
    80 bytes from 172.17.0.243: icmp_req=2 ttl=255 time=19.4 ms
    80 bytes from 172.17.0.243: icmp_req=3 ttl=255 time=21.4 ms
    80 bytes from 172.17.0.243: icmp_req=4 ttl=255 time=22.1 ms
    80 bytes from 172.17.0.243: icmp_req=5 ttl=255 time=23.1 ms
    --- 172.17.0.243 ping statistics ---
    5 packets transmitted, 5 received, 0% packet loss, time 71ms
    rtt min/avg/max/mdev = 17.266/20.684/23.157/2.100 ms, pipe 2, ipg/ewma 17.758/19.114 ms
    fn1.vpn#ping 172.17.0.241
    PING 172.17.0.241 (172.17.0.241) 72(100) bytes of data.
    --- 172.17.0.241 ping statistics ---
    5 packets transmitted, 0 received, 100% packet loss, time 4008ms
    (Pay no mind to the horrendous latency; it's due to the way Arista wrote the VM).
    So after all of that: should I expect HSRP to be fully supported with XRv?  Or, like the L2 interfaces that are fully configurable, is it something that isn't supported?  Did I, perhaps, forget to enable some bit within the XRv's config?
    Thanks!

    In order to get redundancy to run between two SLB switches, you need to configure HSRP between the two VLAN interfaces and then associate the standby name with the Cisco IOS SLB Virtual Server (Vserver). When using IOS SLB in an HSRP environment ensure that the active HSRP router (also active for IOS SLB) is receiving the return traffic for the IOS SLB connections.

  • Is it the new iPad Mini Retina or IOS 7 CRASHES CONSTANTLY

    Is it the new iPad Mini Retina or IOS 7 CRASHES CONSTANTLY
    I hate to, but I feel I am a guinea pig at 700.00 a crack 128gb mini.
    I have 4 of them and THEY ALL DO IT. I have restored, setup as new ipad but nothing works.
    also, the colors on the new ipad mini seem dull and off. I have a plum colored car and it looks brown on the mini.
    Giving up...

    i bought an iPad Mini Retina earlier this week
    came back home, updated to iOS 7.0.4 and it crashed many times, while browsing settings but also some apps
    i had it exchanged because of a yellow tint on the screen
    got a new one, under 7.0.3, also crashed several times, updated to 7.0.4, still crashing
    wondering if the new 64-bit processor has something to do with the code used for iOS

  • Is anybody else having their Adobe AIR iOS app crash within the first second of opening it?

    Is anybody else having their Adobe AIR iOS app crash within the first second of opening it?
    I am using iPhone 6, iOS 8.1.3, with a development certificate.
    With Adobe AIR SDK 16.0.0.283 and now with 17.0.0.93, after compiling the app (whether in release mode or debug mode), before the app getTimer() can ever reach 999 milliseconds the app will crash. No matter what code I have, it is just crashing before the runtime can ever reach the first second.
    Anybody else having this kind of behavior?

    Chris,
    Thanks for your prompt reply. I have found the way to reproduce. It is about interfaces, and when I try to call a method through an interface the app crashes. I think that it is related to having an interface with many parameters. I have logged the bug here:
    Bug#3935199 - iOS App crashes when calling an objects method through interface

  • Aspire 6920 crashes after booting correctly - screeen zig zags and freezes - any ideas to help plse?

    My aspire 6920 crashes after booting correctly - screen zig zags and freezes - any ideas to help plse? This does not happen in safemode which I am working in now - I have seen a list of dowloadable drivers on the acer site but not at all sure if I should download any. If laptop is really on its way out I will have to let it go - but I would appreciate any advice to extent its life,  Thanks

    Many thanks - relieved that it can be done but I am very unconfident that I can do this - is the display driver the display adapter in Vista? Not at all sure how to install new driver from Acer site - Could I use 'Drivers for free' download - I tried to set up an account with them after seeing their free download on CINET but not able to from 'safe mode' and laptop crashes when I try to do anything ( after about a minute ) in ordinary mode.  Any further advice welcome, thanks

  • Windows 8 crash on boot from hibernate

    Ever since I bought my Thinkpad S1, the thing has had trouble rebooting from hibernate. 9/10 times it crashes on boot and i have to shut down the laptop with the power button in order to reboot it manually. It always crashes while the spinning windows 8 loading icon is showing. 

    Yes, probably you are right.
    Its very strange that you cannot install any of the Windows systems. Even if there would be a software problem, the Recovery Disk should solve this.
    But according to your last message, the recovery disk does not work too and therefore a hardware problem is possible.
    Unfortunately, its difficult to say whats exactly wrong here without running some diagnostic software and checking the hardware parts.

  • Latest Revel IOS update crashes and won't install

    I have been using Revel v 2.3.1-548 on iPhone 5 and iPad 3 without any issues. An update was released today (29 June) and this won't install and crashes the app on both devices so I have had to go back to the old version. Anyone else having this problem?
    Steve

    Does not work in Norway!
    Med vennlig hilsen
    Sincerely Yours,
    Knut E. Fagerholm
    [email protected]
    +47 928 86 407
    Sendt from my iPad.
    Den 1. juli 2014 kl. 19:40 skrev dkbrillhart <[email protected]>:
    Latest Revel IOS update crashes and won't install
    created by dkbrillhart in Revel - View the full discussion
    Thanks.  That worked to restore the previous version from iTunes backup.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6513742#6513742
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Revel by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • 2 month old iMac, crashes during boot

    Yesterday I received an automatic software update. Today it crashes during boot up. This is what I see:
    panic (cpu 0 caller 0x003AA827) Unable to find driver for this platform: "ACPI"
    Debugger called: <panic> .... then it spits out a bunch of hex codes...
    Darwin Kernel 8.9.1
    Sigh...

    The two hardware issues that come to mind are loose or unseated ram module(s) and resetting the SMC. There have been quite a few folks reporting an issue with a unseated ram module that reinstalling fixed.
    http://docs.info.apple.com/article.html?artnum=303084
    http://docs.info.apple.com/article.html?artnum=303446
    There is a long list of issues related to firmware and software!
    17" iMac Intel Core Duo 1.5GB Ram   Mac OS X (10.4.9)   Maxtor 300GB FireWire Creative Inspire 2.1 2G Nano

  • X-Server Crashes on Boot After Switch From Catalyst to Open Source ATI

    Seems like there's a lot of similar stuff to this, but I've searched and googled and I haven't found anything that seems to apply directly to me. Please forgive me if there's a thread I've overlooked.
    I recently wanted to give Catalyst a try, because I wanted to play a few old games in wine, and they didn't seem to work with the xf86 driver. It worked, the games played, but the instability wasn't worth it, so today I tried to go back. I followed the instructions for switching on the ATI wiki page, and now I have an xserver crash on boot, and somehow it's also wrecked my wifi.
    I've tried everything in the "preparing for catalyst users" section on the wiki, and I've come up empty.
    Obviously, as I can't get into X and there's no internet on that machine, I can't post my log file. If there's any info you people would find helpful, please ask.
    Thanks.

    The only way to get real help is to find a way around that. Arrange to use someone else's computer for a short time and copy your log file to that one. Also, why not rename your log and then post it by switching back to Catalyst to get back to your last "working state"?
    As for the wireless problem, what happens when you run iwconfig? Common commands are:
    Listing networks -- iwlist wlan0 scan
    Connecting to one -- iwconfig wlan0 essid NAME && dhcpcd wlan0

  • Application on iOS 6 crashes almost 30%...., Application on iOS 6 crashes. almost 30%....?

    After updating to iOS 6 crashes has increased significantly

    Many apps need to be updated to run well on iOS 6. I get a notice about an available update almost any day.
    But I've not really noticed too many crashed since updating to iOS 6 so I suspect that you are experiencing some unusual behavior.
    First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the devise restart. See if that fixes your problem.

Maybe you are looking for

  • Problem with MIGO

    I have a PO wich have been MIGO (mov 101). Then the reception has been cancelled but non valuated ( i dont know why because the WEUNB (Goods Receipt, Non-Valuated) wasnt fleagged). The problem is than i have the 101 valued and the 102 non valued. I h

  • How can I add pretest quiz after chapters/groups

    My project requires the learning to be divided into 17 chapters with pretests or quizzes at the end of each one then one final test at the end. It is restricting me from moving any quiz slides around in any segment type arrangements. It is locking al

  • Odd and even rotating pages by file name

    Hi all, Hoping someone can help me trouble shoot my script below. The aim is to determined if the last two digits of the file name are odd or even and then rotate the file accordingly. I have been able to get the page rotation work by it's self but i

  • Cannot save as TIFF LWZ

    In the Photoshop CS6 Beta I don't TIFF options to save.  The only option I have in saving a TIFF is raw compression.  What's up?

  • Do I need to repackage when I get a new serial number?

    I received a new serial number and was wondering if I have to create a whole new package every year with the new serial numbers?