IOS4.0.2 bricked my iPhone 4 (And now I can't recover)
Half way through the install it stopped working and went into Recovery Mode. I'm now trying to 'Restore' my phone to factory settings but every time I get an error saying it can't be completed.
I have a 32gig iPhone 4 on a Mac Book Pro (15in) and all my software is up to date.
Any ideas, suggestions or thoughts on what I can do to restore my phone to factory settings without connecting to iTunes? (Since that seems to be the issue)
Thanks for the help!
Thats a bummer I can't do it myself as its not convenient for me.
Thanks for letting me know though. I appreciate it and will go ahead and make an appointment at the Apple Store.
Similar Messages
-
I reset and erased my iphone 4 and now I can`t reinstall it! After I choose a language, region. and wifi, it says Please, try again later or contact customer care. I tried to do with iTunes, and iTunes even sees this iphone, but it`s like blank, there is nothing I can do in iTunes. It uploaded last software for this iPhone 4, but when it tries to do the reserve copy of iphone first, it shows a mistake. And ask to disconnect and connect the device again, which, obviously, doesn`t help.
This usually happens if the phone has been Hacked / Jailbroken / Modified...
Is this the case...?
If so...
Then... Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
I took a video with my iphone 5c and now i can't get it back to photo mode
I took a video with my iphone 5c and now i can't get it back to photo mode. Any suggestions?
LauraIn the camera app, tap and hold and slide from video to photo.
-
I recently updated my iphone software and now I can't upload photos from iphone to mac computer. Help please.
The following link has 2 methods for importing photos to a Mac (not counting Photo Stream). Are you using iPhoto or Image Capture? If you follow the steps in the link for that method, what exactly happens that doesn't allow the upload? iOS: Import personal photos and videos from iOS devices to your computer
-
I uploaded photos from my computer onto my iPhone 5c and now I can't delete them?
I uploaded photos from my computer onto my iPhone 5c and now I can't delete them?
did you sync them with itunes on your computer to get them on your phone? Just unsync them using itunes on your computer, uncheck the folders that you synced and sync again
-
I just downloaded the new iOS7 onto my iPhone 5 and now I can not get my iMessage to activate with my Apple ID! My iPad connected just fine but my iPhone won't. Please help
I would go to Settings - General - Reset - and Reset Network Settings
Try it again after the phone restarts -
I reseted my iPhone 4S and now i can't unlock him. It doesn't want to connect in iTunes
I reseted my iPhone 4S and now i can't unlock him. It doesn't want to connect in iTunes. What can I do?
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode. -
I have the iPhone 5 and with the new sofware update it added a passcode lock. Same for the iPad. I removed the passcode lock from my iPhone and now I can access my iPad. It is still asking for the four digit passcode. I tried using the one that was orgingally programed and it disables it every time. How can I get past this? I have tried to do a restore and it still takes me back to the lock screen. Please help!
Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
I bought an iPhone 5 at Best Buy, and they started the setup assistant process. Now I can't go back and start over so I can sync my phone to my iTunes account. I have an old iPhone 3GS and didn't use the iCloud. I backed up to my computer. And now I can't reset my iPhone 5 to sync to my iTunes.
Help.I purchased a iPhone 5, and after completing a backup of my old iPhone 3GS, I in error selected Set Up as a New iPhone in the Setup Assistant.
I connected to iTunes and did a Restore iPhone, which set the iPhone5 back to factory defaults, and I was able to restart the Setup Assistant, and following the apple support instructions, restored from my 3GS backup and synced with my iTunes account. The Restore kept my phone number intact.
I was worried that I would lose the setup of my phone number that was done in the store, but everything worked perfectly. -
i have just reset my iPhone 5 and now when I open the App Store it says "cannot connect to app stpre" "cannot connect to iTunes store" I have googled what to do and everything it says to do I've done... My wifi connection is fine (that's what I'm using as I write) I'm about to sell my phone tomorrow thats why I reser it so I need to fix it what do I do
Hi Rhiannon.A,
Try to reset all setting on your phone and see. If issues still persist try to back up your phone using iTunes and restore it using computer. -
Updated iphone 4s and now I can't get my phone to work anymore?
I have the iphone 4s and I backed it up to Itunes and then retored and updated everything and now I can only get my iphone on and it keeps asking to restore it over and over again with Itunes, I hve restarted both my Mac and my Iphone and still can't get past this part.
Help?Try to restore it in recovery mode, see:
If you can't update or restore your iOS device -
I updated my iPhone and now I can only receive texts from either other iPhones or from people within my Sprint network. My friend has a Droid and I cannot get her texts now. What could be wrong?
Your device is broken. If you want a device that works better than the one you have now, then you'll either need to bring your phone into Apple for out of warranty exchange ($149), or find a 3rd party repair shop in your area and see what they can do, if anything at all.
-
So last night my boyfriend upgraded his old Samsung galaxy to the Samsung Galaxy s4. He was able to receive a few of my text messages, but then they randomly started saying "not delivered." I turned on and turned off my phone, and tried the turning off and on imessage and facetime but nothing has worked and I still can't text him. I am receiving his messages just fine, I just can't send any to him. I looked onlne at Apple Support for help but I noticed a majority of the problems were coming from people that switched from iphone to an android, but he has always had an android and I've been using the same iphone 4s the whole time. It is really bugging me, so any help or suggestions would be greatly appreciated! Thank you!
show this link to your friend http://support.apple.com/kb/ts5185
-
i've rebooted and deleted the acc and reinstated, still says the password is incorrect. i get mail but can't send. can anyone help please?
Hi LordBingington,
Welcome to the Apple Support Communities!
I understand that it can be frustrating when you can receive emails but cannot send them. In this situation, I would recommend using the information in the attached article to troubleshoot.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Best regards,
Joe -
Have just updated to the latest version of ios6 on my iPhone 4Sand now I can't see the apps that need updating. Is showing 8 but just left with blank screen- how do I fix this?
Look for the little Flag button in the lower left corner.
Maybe you are looking for
-
I have an iProblem with my iPod
Did that horrible, horrible joke get your attention? Great! I recently got a video iPod and a MacBook Pro, both my first mac products as I have lived in the dark ages for windows for quite some time. My problem is that my iPod was formatted for windo
-
Running a Reporting Services Subscription from code in SharePoint 2013
We have a need to run Reporting Services Subscription that is set in one of the SPWebs The current developer went through SQL to get the Subscription object and run it whenever a user clicks a button to do that. Is there a programmatic way using the
-
Files directory for a Labview executable in Windows 7
I'd like to hear some opinions on this and ask what other people do. Most of my programs save data files that need to be accessible to the user, and some of them read text files that have been created by the user, e.g. a file containing a sequence of
-
Communication channel creation - Adapter typr missing
Hi Im trying to create a communication channel between XI and ECC system and also XI and third part application. I imported the .TPZ file and Im trying to create a communication channel between XI and ECC.I click on create communication channel under
-
Sir, We are following the process of SOP in REM as follows:- 1) Creation of Product group. 2) Upload the Sales plan for product group 3) Desagregation of products 4) Copy to active version from inactive version 5) Transfer to demand management we req