IOS4 and 3GS bluetoot headset don't work ánymore

I use Nokia Bh 212 headset and that work like charm 3.1.3 firmware, but when i update IOS4 the that dont work, it's find that headset, but don't connect, i think that is some problem ios4 because so many have problem car stereo bluetooth and other bluetooth systems, but when we get fix this?
I need that everyday, because finland you get 50€ ticket if you hold phone in your ear

Found this, give it a try. I have the Nokia BH-905 and they connect but when you press play on the iPhone it will just go over the speaker. Instead, cue the song you want to play and hit pause on the iPhone. THEN press the play/pause on the headset a few times (usually twice for me) and it will then playback over the headset.
The difference for me is that with 3.1.3 it would recognize that I turned on my Bluetooth headset and set the music output automatically to that and show the icon in iPod. But now it stays on the speaker, and only by pressing the play/pause button on the headset will it switch the output. I hope that this is a bug not a feature and will get fixed with 4.0.1.

Similar Messages

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4. However, I cannot record voice memos with my Bluetooth mic.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine. I can also use voice activated dialing, although it fails miserably interpreting numbers. However, I cannot record voice memos with my Bluetooth mic. I just get barely audible static. Any suggestions? Thanks.

Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
Thanks!

HT201412 My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work, As long as I have this situation I can do nothing on

My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!

I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off?

I forgot my Apple ID password and I can't reset it because my email account has been closed and the security questions don't work

I Forgot my Apple ID password and I can't reset it because the related email account has been closed and the security questions don't work! How do I solve this? Thank you.

Click here and contact Apple.
(113292)

I updated to the latest IOS and now my passwords don't work. Reset 4 time which reset for my iPad and iPhone but I cant log into my itunes account using my apple ID it indicates an error, Help?

I updated to the latest IOS and now my passwords don't work. Reset 4 time which reset for my iPad and iPhone but I cant log into my itunes account using my apple ID it indicates an error, Help?

This may sound crazy, but download any free app. This often "shocks" the other apps into working.

What should I do on GMAIL LOADING and the buttons that don't work on Firefox 4?

The Write e-mail, reply, reply all and config GMAIL buttons DON'T WORK AT ALL in MZ Firefox 4. In Explorer 9 works fine. Shat shoud I do? And ABOUT:CONFIG dom.storage don't fix the problem

Data Recovery – Best
Data Recovery – Disk Drill
Data Recovery – Data Rescue
Data Recovery – File Salvage
Data Recovery – Stellar Phoenix
Data Recovery - uFlysoft
Data Recovery – Best
Data Recovery – Disk Drill
Data Recovery – Data Rescue
Data Recovery – File Salvage
Data Recovery – Stellar Phoenix
Data Recovery - uFlysoft

My screen freezes up more often and the keyboard shortcuts don't work. I have to manually shut it down. what can I do about it?

My screen freezes up more often and the keyboard shortcuts don't work. I have to manually shut it down. What can I do about it? It's a pain when I'm in teh middle of doing something or chatting in MSN Messenger.

The problem is no Frre Ram. (green slice), Use Disk utility to REpair Permissins & see if the Ble turms to green.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

I just opened my new earphones and the volume buttons don't work! Help

I just used my iPhone 5s earphones the first time yesterday and the volume buttons don't work. I tried unplugging them and then plugging them in again and they still don't work. Also when I plug in any kind of earphones in my phone it doesn't completely go in, is that supposed to happen?

Never mind, I found out why it didn't work. Since my phone and earphones were new the earphones didn't plug in well. So when I plugged it into my mac it went all the way in and the buttons worked. When I plugged it back in my phone it went al the way in this time and the buttons worked.

Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help

Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help. I try to go to settings and the volume won't go up there either I have the home button gesture and still the same. I try resting my iPad and nothing no sound work unless I have my headphones in. Do anybody know how to fix this

Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore

Z77A-GD65 - fast ram and Intel Rapid Start don't work together??

Greetings.
I have got 2x4Gbyte G.Skill CL10 2400Mhz ram. When running this ram at its default speed at 2400Mhz, Intel Rapid Start don't work. When I shut it down, it acts normal until the point where the system "wakes up" for a few seconds to write to the special partition for IRS. The PC then try to reboot, but after 2 attemps it says that the Overclocking has failed and I have the choise of F1 (setup) or F2 (load default settings and continue).
If I lower the ram speed below the default speed (i.e. don't use the XMP profile), then Intel Rapid Start works fine.
Memtest86 do not show any error at all after 4 pass with the G.Skill at 2400Mhz. To me it seems like the motherboard can't handle this speed at the state in Intel Rapid Start.
Anybody with info about what to do?

Quote from: RemusM on 16-January-14, 00:14:15
The internet is bloated with paid "reviews" ...
Here is what you have and what you paid for:
http://ark.intel.com/products/65520
Max Memory Size (dependent on memory type) : 32 GB
Memory Types : DDR3-1333/1600
Memory Channels : 2
Max Memory Bandwidth : 25.6 GB/s
Intel does not guarantee anything above 1600MHz.
On the top of that, 25.6 GB/s bandwidth is enough for DDR3-1600 in dual-channel only.
In other words, above 1600Mhz the perfomances boost is close to ZERO.
RAM speed over 1600Mhz does nothing? That WAS true, but not anymore. First of this:
Anandtech:
http://www.anandtech.com/show/6372/memory-performance-16gb-ddr31333-to-ddr32400-on-ivy-bridge-igp-with-gskill
xbitlabs:
http://www.xbitlabs.com/articles/memory/display/ivy-bridge-ddr3.html
overclock.net:
http://www.overclock.net/t/1438222/battlefield-4-ram-memory-benchmark
Second, I can messure a real performance difference when using this memory at 2400mhz vs 1600mhz, f.i. Winrar5.01 x64, when searching in reg.database, and other memoryhungry programs. My graphic-card is not powerfull enough to show any difference in games, but almost anything else I _can_ se a difference.
If you honestly can read these 3 links and still say, that memory speed does not matter, I think I know more about this than you
I'm quite sure, that a big place like Anandtech is not payed to show up this result.

Quicktime and new Adobe flash don't work!!

Ever since I have ? downloaded new iTunes/Quicktime updates I cannot get Quicktime to play any movie trailers. Also, when I go to any sites which need a Flash player, I am unable play any flash related videos. To add further frustration, I am unable to download the new Adobe flash player. It "downloads," but goes nowhere on my computer and is nonfunctional!! I feel like because I have an "old" Mac with Panther (which otherwise works great!), I am slowly being phased out of all the new downloads as they often either don't work or screw up my system. Help!!

Hi again Stephen,
That's great! I'm glad that that got you back on the track.
I personally Repair Permissions about once a week or so (though the need to is highly debated here in Discussions).
You might be interested in having a look at About Disk Utility's Repair Disk Permissions feature.
Always Repair Permissions from Disk Utility on you HD before and after any Software Update/Upgrade for trouble free downloads.
Glad I was able to help and thank-you for the courtesy of extending the Solved star!
good luck,
littleshoulders [:-)

Oracle 9i and 9i Developer Suite don't work together

I've tried to install 9i and 9iDS in different homes. Then, I can work with SQL*Plus (of 9i) but all 9i DS's applications don't work at all. The main problem is that I can not connect to the Database of 9i.
Is there any body know the solution? Pls help, this is the first time I use developer suite to study Form and Report.

this tnsping was a great start. it allows the user to find another place to look for errors ora files.
I was looking in every instance of my TNSnames.ora files. the one in the 9i as well as the 10g were alike and fine. I had to comment out some bad lines from the 10g ora file. the tnsping found the SQLnet.ora file that contained an error. in this case the error was the same line needed to be commented out.
it is not that I forgot to do so but I didnt know that this line was even in any of the files.
this tnsping works as a great trouble shooter.
thanks...

Updated to Mountain lion, and now iPhoto & iMove don't work. Help!

I updated to Mointain Lion, and now my iPhoto & iMove don't work. I would rather not have to pay for them AGAIN..
The error i get is "You can't open the application 'iPhoto' because thr PowerPC applications are no longer supported"
Any help greatfully recieved

Yes.
Current iPhoto is 9.4.3.
Current iDVD is 7.1.2
Current iMovie is 9.0.9
You can either buy iLife 11 which will update or download from the App Store, which doesn't have iDVD.

HAVOK, And all other xtras don't work in the Mac version

Just tested the new Director. Another amazing leap forward,
well not, it's the same spot they've been in since 8.5. And
although they effectively keep releasing the same product, in this
version the xtras, Havok included, don't work in the mac version.
They do on the pc. I wonder if this means that the havok based
games won't work in shockwave 11 on the mac. I make games, with 15
million plus a year playing them. It's annoying.
HAVOK, DIRECTxtras, ASFFT and a few others I've tested. Any
other comments?
Also speed wise, 3d is much better but everything else plays
at same speed.

If you are not on a PPC Mac, then none of the PPC xtras will
work until
the developer compiles them as Universal binaries. In the
case of
Havok, that is unlikely to happen, which is why they have the
new Aegia
engine instead. For other 3rd party xtras, talk to the
manufacturer and
see if they have a UB version available. Many of them were in
on the
beta, so they may have new versions up now.

Updated to iOS 7 and now car controls don't work

I recently updated my iPhone 5 to iOS 7, and now it no longer works properly with my vw golf sound system. I used to be able to plug it in and control it through the touch screen in my car, but now everything is jumbled and the controls don't work. Please help!

It is the update. I am having the same problem with my Nissan and all my updated apple products. It is awful. I wish I did not update the software.

IOS4 and 3GS bluetoot headset don't work ánymore

Similar Messages

Maybe you are looking for