IOS4 and VPN/Firewall routers

Hello,
I am trying to get VPN connection from iPhone and iPad(3G). I have tested Linksys (Cisco) RV042 -router. But I was told by Cisco that RV042 does not support connection from iPhone...
So, I would like to ask which VPN/Firewall devices you have used succesfully with iPhone or iPad?
Message was edited by: Sarnikorpi

They will be like any other exam, three years valid towards any eligible path.

Similar Messages

Reliable working combination of VPN client and Sidewinder firewall?

My work's I.T. Dept has deployed a "Sidewinder" VPN firewall with certs at our workplace. All works well with our many remote Windoze clients. The Windoze clients are using a "Greenbow" VPN client.
They (the I.T. Dept.) were never able to get the built-in OS X VPN client to work with the Sidewinder VPN firewall at all. I don't really have any details of what they tried or why it didn't work and they aren't exactly the friendliest types to us Mac users in the organization so I probably won't be getting any further details in that regard.
They (the I.T. Dept.) did get VPN Tracker Player v6.2 client to work on the remote Mac clients -- sort of -- but it consistently fails after roughly ten minutes of connection time at IKE renegotiation. They purportedly had a trouble ticket open with, and were working with, Equinux to try to resolve the issue, but after spending a certain amount of time on it, they basically told us Mac users in the organization that they had already spent way too much time on trying to make the Mac VPN client work, so they weren't going to be doing anything further with it, so too bad, so sad for us. And they've got 100% Director support backing up their decision.
So, the question du jour is, is anyone out there using a VPN client on a Mac and reliably connecting through a "Sidewinder" VPN firewall/server with certs (i.e., no dropped connections after about ten minutes or thereabouts), and if so, what VPN client are using and how did you/do you have it configured?
Thanks

(first and last) bump

Netgear FVS336G VPN Firewall and BT HH3

I am trying to put the FVS336G into my home network directly after the HH3 and before a netgear 16port switch. The 200+ pages netgear ref manual is not paticularly helpful and from what I have read/+online I can only have one DHCP Server on the network, currently that is the HH3. Can I disable DHCP Server on the HH3 and I assume bridge it to the FVS336G? I would like the FVS336G to act as the DHCP Server in the network and use the HH3 just as an ADSL Modem. Or do I dispense with the HH3 and just get a cheap ADSL modem? I purchased the FVS336G so that I could secure my network down better and use the VPN/SSL tunnelling to allow me to access my NAS when I am away from home on business.
Any advice on putting a physical VPN Firewall router into the network would be appreciated.

PPPoA is used for ADSL connections, and PPPoE is used for Infinity connections.
If you used a separate ADSL modem to do the authentication, then authentication would not be needed on the Netgear, as the PPP session would already be up, however it would be a waste of money if you moved to Infinity.
Meanwhile, you can still use the Netgear as an additional wireless access point if you want.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Interworking between WCCP and IOS firewall on ISR and ASR routers?

I ran into a problem last year when running WAAS WCCP and IOS firewall IP inspection on the same 3945 router. They couldn't function at the same time. Cisco indicated that router IOS firewall and WCCP were compatible only when IOS zone-based policy configuration was used. Back then I was using IOS 15.1(1)T1 on the 3945 router and WAAS was version 4.2.3.
I now have some sites with 2921, 3945, and ASR1002 routers that need to be both IOS firewall and WCCP for WAAS. Now with newer IOS releases, does the IOS firewall estill have to be zone-based policy configuration? Because classic classic IOS firewall is easier to configure for WAAS, just "ip inspection waas enable" command, I'd prefer the easier configuration.
What about ASR1002 router IOS firewall with WCCP? I have never implemented that before. I was trying to find some deployment examples or configuration guides from Cisco, but was not able to.
Thanks for any help.
Gary

I'm assuming you placed service group 61 and 62 on the router LAN, WAN inbound directions. Did you apply inspection to LAN to WAN direction or WAN to LAN direction?
Did you also used WCCP and IOS firewall on ASR routers?
Thanks a lot

WRT54G - Is there anyway to add a separate VPN/Firewall device to complement this product

I have a WRT54G v.2 device and I hate to throw it out. My dilemma is that I'm in need of a VPN/Firewall device as well. So I would like to know if there is a device that I can purchase from Linksys that will provide the VPN/Firewall features as a complement to my existing WRT54G? I'd appreciate any info someone might be able to provide.
Regards.

Hi,
you have options between the RV series of VPN routers and the BEFSX41 and the BEFVP41.however you will have to change your network a bit.Your main router will have to be either of the VPN routers.The DHCP of the wrt will have to be disabled and you will also need to change the ip of the wrt from 192.168.1.1 to 1962.168.1.2
The connection will be.modem to internet port of the VPN router and then from port 1 of the VPN router to port 1 on the wrt.Do not use the internet ports of the wrt.

TS1814 I have a 4th gen. IPod Touch with IOS4 and i want to update it, but when I hit the Update button its says "contacting the IPod software server" and then after about 5 seconds it says "ITunes could not connect to the IPod software servers". Please h

I have a 4th gen. Itouch wiht IOS4 and i want to update it, but when i click the update button in ITunes it says "contacting IPod software server" and it looks like it is loading. However, after about 5 seconds it stops and says "ITunes could not connect to the IPod software server". I found the apple webpage that is supposed to help me, but when i went to the LAN settings in the control panel i found that 'Automatically detect settings" was already checked. I do not know what to do, Please help.

If yo mean the iPod will not connect to your wifi network:
Does the iPod connect to other networks?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Help setting up Leopard Server(Standard) and VPN

Hello,
Here is my set up:
We have a static IP.
ADSL Netgear Router takes in the internet connection. (Not sure what the version is, but it had a VPN wizard).
Latest Aiport BS serves just the wireless.
Leopard Server in Standard Mode.
For the life of me I can't get the VPN working. I can't even make the server public. Granted I am out of my depth, but I am endeavoring to learn but there seems to be so many boxes to tick with servers that I never even know where I am up to.
On the 3 items in my setup above, what should the settings be starting to look like.
If I type our servers FQDN into Safari I am told that the server does not exist, but I can't work out how to make it available to the public. I am guessing that if I can't see the server via a browser then I am never going to be able to connect via VPN?
If you know of any other questions that I should be asking too, please let me know. My googling is getting me no where. I have even been doing the lynda.com tutorials on Leopard Server. So I promise that I am trying.

Hi
Perhaps if I broke it down in these two ways.
(a) There is nothing stopping you from using the built in Routing Services in Leopard Server. To make things clearer these 'Routing' Services would be VPN, Firewall, NAT, DHCP and possibly DNS. Basically and simply if your server (by that I mean the hardware you are using to be your server) has two ethernet ports and if your ISP supplied broadband service is by DSL Cable Modem then you don't need a 3rd-Party Router. You can simply connect the ethernet cable from your Cable Modem directly into one ethernet port (this would be the WAN/Public/External connection. The other ethernet port can be connected directly to your network switch/hub (switch would be better). This would be your LAN/Private/Internal connection. Running Gateway Assistant will help you configure the Server (simply to begin with) to 'share' the internet connection on your WAN port with any client computer configured to use your LAN port. It is NAT that basically fulfils this function. The Firewall Service will allow any request that comes from your 'trusted' LAN access to the Internet using the WAN port. Any 'untrusted' request trying to gain access to your LAN from the Internet is blocked by your Firewall unless you configure your Firewall to allow it through. The VPN Service along with the DHCP Service can be configured to allow trusted remote clients to access your Server as well as the private network as if that remote client was actually at your Server's location. Remote client access is achieved by simply keying in the fixed external IP Address that is used at your Server's location in Internet Connect as well as a name and password that is configured on the Server.
(b) You purchase a 3rd Party Router to this all for you and dispense with the built in tools on the Server. Simply configure the Router to allow VPN passthrough. There are 3 basic VPN connection methods: PPTP, L2TP and IPSec (ISKAMP). Each of them offer increasingly more secure methods. Depending on which method you finally decide on may mean using additional 'client' software not available as standard on the client OS.
Back to (a): If your internet connection is down a phone line then you would need to use an ADSL Modem Router anyway. For me it does not make much sense to connect the LAN side of this Router to your Server and to further configure the Server to do something the Router can already do for you in most cases better and simpler. Why complicate things trying to do this server side when by your own admission 'I am not getting it/anything'
There is some excellent advice on these forums regarding VPN have you searched for them? If you have and you are still struggling to understand this then perhaps it may be more beneficial as well as being cost effective to get a professional in to do this for you. You would benefit enormously as not only will you see how it gets done but you will also be able to ask questions that may make the whole concept of VPN and networking in general more understandable.
Hope this helps, Tony

Adding NetGear Prosafe 8-port Gigabit VPN Firewall to existing TimeCapsule Network

I need some help and direction with this one...
What I currently have setup and what I am doing on a day to day is as follows;
Cox Cable Broadband > ISP Cable Model > Time Capsule >Airport Express v1 + Airport Express v2 (Both extending wireless). I have a Dell/Windows Server setup as a Media Server and also have it setup to accept VPN connection as well. I remote into my network quite a bit as well as VPN into it quite a bit, I RDP into the Dell Server as well as an iMAC and MacBook Pro from time to time. I have PS3, Xbox360, Apple TV 1stG and 2ndG, 2011iMac, 2011MacBookPro, iPAD3 and various other wireless clients. I would really like to add as much security as I possibly can and thought adding a Hardware firewall would be a good step.
So I Purchased a NetGear ProSafe 8-port Gigabit VPN Firewall that I would install on my network and have everything behind that. The problem is I have no idea how to set it up for the best protection and performance. Only thing I found online is putting it behind my TC which would then leave my Wireless Clients outside the Firewall? I'm usually pretty good with this stuff, but this time I'm just completely confused and not even sure if I need this or if it's completely useles. I do like the TimeCapsule also running 2 Airport Express (v1 & v2) to extend my wireless network, but I'm not sure if it's as secure as it could be.
If this was a good step buying a hardware firewall and from what I've read the model I bought (FVS318G) is pretty good, it's also solving a problem I have had with my network is needed Ethernet access. Time Capsule only has 3 ports so I figured this would also solve the lack of Ethernet ports as well.
I'm thinking I would go from Modem > NetGear(DHCP Enabled) > Time Capsule (Somehow turn DHCP/Router off) > all my network clients.
Can Anyone offer advice?? How I should configure this? Is it pointless? Return the Netgear Firewall? Buy a different hardware firewall???
*BTW* I have software security covered, just want to add hardware as well.
Any help/suggestions would be extremely helpful!
Thank you!

I am not sure who made the suggestion for the vpn router to be behind the TC.. they do that sometimes for connection to vpn for downloading TV shows etc.. but your proposed network layout is correct.
I'm thinking I would go from Modem > NetGear(DHCP Enabled) > Time Capsule (Somehow turn DHCP/Router off) > all my network clients.
All correct.. The Netgear has to be the one and only router.. otherwise the VPN will not give you access to the rest of the network behind the NAT.
So easy peasy.. bridge the TC.. use the 5.6 utility if LIon.. you will need to download and install it..
http://support.apple.com/kb/DL1482
Lion v6 is a toy..
Go to manual setup, internet tab. Connection sharing.. off, bridge mode. update the TC.. voila you are done.
You should probably reboot the whole network. As the expresses will need to now get IP from the netgear not the TC. Tell us if you run into trouble, but everything should work, although it may require a reset and redo setup of the TC and express to get everything smooth again.
Next issue.. hardware and software firewalls.. sometimes produces the great wall of china.. very secure... oh so secure nothing gets in.. or out. I do not know the Netgear.. but I would start with whatever the lowest preset is for the firewall. And see if you have issues.
And of course then do the vpn setup.. which is a lot of fun.. (read strong sarcasm). But once you establish the tunnel should then give you access to the whole network.. you will not need to use RDP unless you need to actually take over a computer.
VPN firewall is the RIGHT WAY.. albeit it can be painful in the initial stages.

Ask the Expert: Introduction to Cisco Adaptive Security Appliance (ASA) version 9.x (Context Aware Security and VPN Features)

With Namit Agarwal and Rahul Govindan
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Adaptive Security Appliance (ASA) version 9.x (Context Aware Security and VPN Features) with experts Namit Agarwal and Rahul Govindan.
This is a continuation of the live webcast.
Cisco ASA CX (Context-Aware) is a next generation firewall service that serves as an extension to the Cisco Adaptive Security Appliance (ASA) firewall platform. In addition to the proven stateful inspection firewall capabilities, it provides us with next-generation capabilities and a host of additional network-based security controls for end-to-end network intelligence and streamlined security operations.
Namit Agarwal is a customer support engineer at the Cisco Technical Assistance Center in Bangalore, India. He has more than four years of experience in the security domain. His areas of expertise include ASA firewalls, IPS, and ASA content-aware security (ASA CX). He has been involved in various escalation requests from around the world. He holds CCIE certification (number 33795) in security.
Rahul Govindan has been an engineer with the Security Technical Assistance Center team in Bangalore for more than three years. He works on security technologies such as VPN; Cisco ASA firewalls; and authentication, authorization, and accounting. His particular expertise is in Secure Sockets Layer VPN and IP security VPN technologies. He holds CCIE certification (number 29948) in security.
Remember to use the rating system to let Namit and Govindan know if you have received an adequate response.
Because of the volume expected during this event, Namit and Govindan might not be able to answer every question. Remember that you can continue the conversation in the Security community, subcommunity VPN shortly after the event. This event lasts through November 1, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.
Webcast related links:
Slides from the live webcast
Video Recording of the live webcast
Introduction to Cisco Adaptive Security Appliance (ASA) version 9.x (Context Aware Security and VPN Features): FAQ from live webcast

Hello Namit and Rahul,
Here are few questions that came in directly during your live webcast hence posting them here so that users can benifit:
1)      How is ASA CX different from other UTM solutions ?
2)      How is dynamic application inspection of CX better than other inspection engines ?
3)      What features or functionalities on the CX are available by default ?
4)      what are the different ways we can run or install CX on the ASA platform ?
5)      What VPN features are supported with multi context ASA in the 9.x release ?
6)      What are the IPv6 Enhancements in the ASA version 9.x ?
Request you to please provide your responses to them individually.
Thanks.

WRT54g with VPN Firewall

Would like to configure the VPN firewall with my existing system. I have Verizon DSL which involves the DSL modem and the Firewall. I have the IP addresses of each. How would I determine an appropriate IP address for the firewall. Should the device be physically connected between the DSL modem and the router? Advice sought

The router has it's own firewall I would turn the firewall in the modem off or at very least put your computer in the DMZ of the modem so that it's firewall doesn't affect you. By default the router is already set to allow VPN connections using IPsec PPTP and L2TP Protocols. @ this point your router will still act as your firewall and you will be able to access VPN.
Vista Ultimate 32 Bit
AMD 64 X2 6400+ Black Edition
4BG RAM
1.18 Terabytes Of Hard Drive Space
Acer 22inch Widescreen LCD
Nvidia 8600 GT PCI E 512 DDR3
WRT54G Router
Netgear Gigabit Switch
Motorola 2210 Modem

Kindly Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN ?

Kindly
Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN?
Thanks,

Linksys/Cisco E4200 are compatible with DHCP. Second, these Wireless-N routers are only capable of enabling the VPN traffic to pass through the device. You will need a VPN router and software to create the actual network to connect with your VPN client.

Mobile Me CONTACTS not coming down to iOS4 and lost visual voicemail

I updated my 3GS to iOS4 and everything seems to be working, howver my contacts haen't repopulated the phone form Mobile Me. they are all still there on Mobile Me, but when I go to contacts on the iPhone, there are none and unlike previously, opening contacts on the phone does not force a sync (no spinning clock-wheel)...
I have tried turning off the Mobile Me setting on the iphone and then restarting it, but still no contacts...
I also lost my visual voicemail.... when I go to voicemail, it wants me to physically dial up voicemail...
Any ideas here?

dmbono wrote:
Try turning off push and instead fetch every 15 minutes. There seems to be a bug that prevents data from getting through on push. Hope they remedy this soon!
Huh? A "bug" would affect all devices using the OS. I have no idea what you are talking about as push worked just fine here after allowing a little time for my phone to be re-provisioned by the network. That took longer than normal due, I'm sure, to the large number of folks trying to do the same thing I was. And we've all hear AT&T whine that we evil iPhone users are breaking their network.

How do I get my new iphone restored with my old backup? my old iphone had ios5 and the replacement phone i got has ios4 and it wont let me backup my phone because it doesnt have ios4... i cant get ios5 without restoring my iphone and backing it uo

Basically, i need all my old stuff from my iphone 4 with ios5 onto my new iphone 4. The new phone i received only had ios4. I went to get all my contacts and backup from my old phone onto my new phone and it wont let me because my new phone is only ios4 and my backup from my old phone was in ios5. I cant get ios5 on my phone without creating a new backup of my new phone, which has nothing on it. If i restore it as a new phone and backup virtually nothing from my new phone, will that get rid of all my old backup stuff from my old iphone?

Bottom line is you CANNOT restore to a phone from a backup that has a more recent iOS which is what you're trying to do. Just can't be done.

Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

Hi there,
I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
connect I get the following message "couldn't connect - We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
Many thanks,
RocknRollTim

Any help would be much appreciated.
Kind regards,
RocknRollTim

Selection boxes in Barracuda Anti Spam and Virus Firewall do not appear in 7.0. They appeared in previous versions, and in IE.

Selection boxes in Barracuda Anti Spam and Virus Firewall do not appear in 7.0. They appeared in previous versions, and in IE.

FIXED!
I reverted back to 3.6.23 and all works fine. From everything I can tell; number of problems submitted, breadth of issues, no access to versions 4, 5, 6 (rapid version turnover with no support), and now beta being released for 8, it seems FF is having the user base do all it's alpha/beta testing without consent. Being in product marketing myself, I probably would have lost a significant percentage of my customer base by now. When FF begins to support a new mainstream release, then I'll be interested again.

IOS4 and VPN/Firewall routers

Similar Messages

Maybe you are looking for