IOS4 in 3GS hanging for more than 2 minutes!
My iPhone 3GS is hanging after I press END before, during and afters calls. This never happened in 3.1.3!
Sometimes it stays like that for more than 2 minutes, than it shows the unable to complete call message.
It looks like it is losing the carrier signal and tries to reconnect.
Any ideas to avoid this?
Alexandre.
Have you tried restoring the iPhone or hard resetting it by holding the Home and Hold button until it switches off?
Similar Messages
-
My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored -
Okay, so I just updated to the newest iOS 6 version on my iPod. And now I can't be in an app for more than 5 minutes without the app closing and I can't get back into the app for at least 10 minutes. Somebody, anybody please help me! This is getting really annoying!!! Please please please!
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time. Help anyone?
Is there a crash log? If so post the first 100 or so lines o fit
Do you know what the ofending plugin is? and where it came from?
LN -
Ipod nano not playing audiobooks for more than one minute at a time
Does anyone know how to fix this problem? I stopped using it after I couldn't play an audiobook for more than a minute before it stopped. A friend thought she had fixed it, but I downloaded another audiobook to the ipod nano and it did the same thing...played for a minute and then turned off. I want to take it with me on a 8K walk, but it is discouraging.
No there is no multi-select for creating SQL-Loader scripts.
You can either create them separately or create them all and
then discard the one you do not need. -
my ipod touch 4g becomes very hot when play games or surf the web for more than 30 minutes. does any body know why?
Maybe the solution is that you iPod is slow is because you are not closing your apps after you use them. To do this you must:
1. Press the Home Button to get out of that app
2. You will return to the Home Screen
3. Click the Home Button twice, (do this quite fast, But not TOO fast)
4. A bar with all your apps that you have come out of will be on the bottom of the screen
5. Hold down one of those apps
6. They will start to "jiggle"
7. A little red circle will be beside all of the "jiggling" apps
8. Press that little red circle and those apps will close (NOTE: This is NOT deleting your apps)
9. Now you apps are closed NOT deleted
10. Your iPod will now speed up in: Browsing, downloading, syncing and much more
11. (Bonus) - To DELETE an application do the same thing ( But not clicking the Home Button twice) and all of your apps which you downloaded will "jiggle" and there will be an black circle with an X in it, click that X to DELETE that app and a dialog will pop up and say: "Do you really want to delete this app?" If you want to: Click yes.
And that is how to speed up your iPod
Bonus) - is how to DELETE an App
Thank You,
Apple 5 -
i cannot sit outside for more than 45 minutes without my ipad shutting down due to heat. is there a way to fix this?
What model iPad? What is the outside temperature?
When outside what are you doing on the iPad - running a graphic intensive app?
iPad operating ambient temperature: 0° to 35° C (32° to 95° F)
Cheers, Tom -
Can you make a movie for more than 2 minutes on an ipad and save it on a flash drive
Can you make a movie for more than two minutes on the ipad and sve it on a flash drive using windows XP
Using Apple's camera connection kit, you can use a flash drive to IMPORT photos and videos. However, you can't EXPORT any type of file to the flash drive.
Cheers, Tom -
Wireless connection lost after macbook pro sleeps for more than 15 minutes
It's annoying. I have a brand new macbookpro 3.06Ghz 17" hi-res screen running OS-X 10.6.3 and the wireless connection keeps dropping after the computer is either turned off or sleeping for more than 15 minutes.
My router is a linksys wireless G, has dd-wrt software in it which is very powerful. When I release or renew the DHCP at the router, the mackbook connects to the wireless network, no problem.
What configuration can be done at the macbook as to not have it time-out airport wireless connections unless I renew/release DHCP at the router? This is an annoyance beyond the limits of anyone's patience.... Thanks in advance for any help!Well, since nobody answered this post I decided to try a bunch of things and I believe I came to a solution:
1 - Make airport the first connection under System Preferences->Network
2 - In the advanced window:
- Under AirPort: Keep only one network name on the list (the one you use all the time)
- Select 'remember networks this computer has joined' and deselect all other boxes
- Take note of the Airport ID (xx:xx:xx:xx:xx) and put it in your router's MAC address list. I do this because I only allow connections to my router from mac IDs that are on the list I create. In my case, I have my macbook pro and my PS3 system. If you don't know how to edit the MAC list in your router, do some research. It's pretty easy.
- Under TCP/IP: Select "Using DHCP" on the IPv4 drop box
- Select "Off" for IPV6 drop box
- Under DNS, after you connect at least once, you should see (grayed out) your router's IP address on the left box and the domain on the right side box.
Finally, under "Ethernet" you should see your Mac address there, the configure option should be set to Automatically and MTU as standard (1500).
Press OK and then press "Apply" and lock that screen by clicking on the padlock at the bottom left. BTW on the top of this screen Location should be "Automatic" - if not, select it and apply.
Done! Your wireless should connect quickly after the computer is turned on or waken up from sleep state. This assumes you configured your router correctly (mac addresses, frequencies, etc).
Good Luck to all who try this - at least I have not have any more dropped wireless connections.
Message was edited by: KEForex
Message was edited by: KEForex -
Monitor any record to stay in queue for more than 5 minutes under AQ ADMIN schema
Hi All,
We need to prepare script which monitor/notify us the record which stays in queue for more than 5 minutes under AQADMIN queue tables. Can someone throw light on this?
Regards,
MDHi Asif,
We need script to monitor if we have "waiting" status in msg_state column of the below table is waiting for more than 5 minutes.
SQL> desc AQ$TBL;
Name Null? Type
QUEUE VARCHAR2(30)
MSG_ID NOT NULL RAW(16)
CORR_ID VARCHAR2(128)
MSG_PRIORITY NUMBER
MSG_STATE VARCHAR2(16)
DELAY DATE
DELAY_TIMESTAMP TIMESTAMP(6)
EXPIRATION NUMBER
ENQ_TIME DATE
ENQ_TIMESTAMP TIMESTAMP(6)
ENQ_USER_ID VARCHAR2(30)
ENQ_TXN_ID VARCHAR2(30)
DEQ_TIME DATE
DEQ_TIMESTAMP TIMESTAMP(9)
DEQ_USER_ID VARCHAR2(30)
DEQ_TXN_ID VARCHAR2(30)
RETRY_COUNT NUMBER
EXCEPTION_QUEUE_OWNER VARCHAR2(30)
EXCEPTION_QUEUE VARCHAR2(30)
USER_DATA TEST1
PROPAGATED_MSGID RAW(16)
SENDER_NAME VARCHAR2(30)
SENDER_ADDRESS VARCHAR2(1024)
SENDER_PROTOCOL NUMBER
ORIGINAL_MSGID RAW(16)
ORIGINAL_QUEUE_NAME VARCHAR2(30)
ORIGINAL_QUEUE_OWNER VARCHAR2(30)
EXPIRATION_REASON VARCHAR2(31)
CONSUMER_NAME VARCHAR2(30)
ADDRESS VARCHAR2(1024)
PROTOCOL NUMBER
Regards,
MD -
Why is my powerbook G3 has been attempting to log in for more than 30 minutes
Why is my powerbook g3 not logging in, it has been attempting to do so fore more than 45 minutes. HELP!
Will it boot from the MacOS X installation disk? If so run the Disk Utility file check to see if any repair is needed.
https://kb.wisc.edu/helpdesk/page.php?id=3810
You could also try booting into safe mode which runs a file check as well.
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/HT1564 -
Icons keep disappearing off the monitor when computer sleeps for more than 10 minutes
My new HP Pavilion I5-2300 keeps locking up when the computer rests for more than 10 minutes. When i go to wake up the computer the desktop background comes up on the monitor, but all of my icons are missing and no command prompts work from the keyboard. I have just been unplugging and then replugging the monitor from the power source and that seems to reboot the freeze, but i really don't want to have to do this every time it happens. Anybody experience anything similar? Am i missing an easy solution here? Thanks
Hi,
As you can see from the theory this alert could mean two things:
1. Too many powershell scripts are executed on agent simultaneously
2. There are scripts that takes much time to complete
First of all, you need to evaluate a script-based module (workflow). You need to find answers to following questions:
– What is the target for this script-based workflow?
– How many instances of this target class are exist on the affected computer?
– Does this script leveraging a cookdown concept?
– How long it take for script to complete?
Please go through the articles below for more details:
http://www.systemcentercentral.com/research-this-kb-power-shell-script-was-dropped/
In addition, here is a similar thread for your reference:
Threshold for SCOM 2012
https://social.technet.microsoft.com/Forums/systemcenter/en-US/00dc16c4-9858-459a-8c65-7d73ac8cc997/threshold-for-scom-2012
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage. Every time I turn on, I change it back to save to SD card. It stays that way until it is turned off for more than a minute. If I do a restart, it holds the setting, but loses it when it is shut down for any period of time. Does anyone else have this issue? The setting holds for photos taken with camera storing to SD card. Only the email attachment setting does not hold.
I believe that system has a hall sensor on it to detect when the lid is closed so it can put the system to sleep and/or disable the monitor so it can be used with an external monitor only. If the sensor is marginal or has a bad cable, it may intermittently cut the monitor on and off, and may likewise put the system to sleep. One way to check would be to plug in an external monitor and if the laptop's screen cuts off or doesn't show up, start using the trackpad and press on a non-typing key like the shift key. If the external display suddenly pops and becomes active while the laptop display remains black, it's probably a problem with the sensor or the cable/connection. You might be able to fool the sensor into kicking on and off by moving a magnet over it. It's located on the left had side of the base with the unit opened up, and right over the audio output plug.
I know of some people that put a small magnet right over the hall sensor's location so the laptop display turns off and they use the system with an external monitor, keyboard, and mouse. If fooling with magnets, make sure they're small and don't get them close to the hard drive because a strong magnet can wipe them out.
I don't know if this will help you much, but it might. -
My iPad 2 won't start even if I already went through pressing the home and start buttons simultaneously. I also tried charging the batteries for more than 30 minutes (done this procedure twice) but it won't still power on. What should I do next? Could it be a hardware issue then?
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Why does it take so long to convert my PDF to word.docx? It has been going for more than 30 minutes.
There could be several reasons. It may be that Acrobat spent that time trying and ran into too many bottlenecks. As a test you might print the PDF to a new PDF and try the conversion on the new PDF. It might be there is a problem with the original PDF that the print process would fix..
Maybe you are looking for
-
Explanation / use of read-only zoning feaure on MDS products
Does anyone know if the MDS product line will work in this way when licensed with the Enterprise option for the read-only zoning? I am trying to come up with a solution to provide real-time access to database files for a 2nd server that facilitates r
-
Where to buy a ADC to VGA adaptor
Im looking for one to pick up at a store. Does anyone know who might carry a ADC to VGA adaptor?
-
Strange Business rule behaviour in EAS
Hi, We are testing some changes to the caches for a planning app. As part of this a number of business rules are be run concurrently to simulate what happens in production. The business rules, with a large data set, are started from EAS, as they are
-
CS2 InDesign and Windows 7 x64
Today I installed a copy of CS2 on a CAD Capable workstation (High powered), Windows 7 Professional 64 bit. (I know it's an old CS version) Can anyone tell me if the OS and CS versions are compatible? I am getting an appropriate permissions error aft
-
I'm trying to set up a canon wireless printer (MG3220) to my iPad and iPhone. I'm using a Motorola modem SBG900. I keep getting the message "no air printer found". What can I do?