IOS4: iTunes could not back up...because a session could not be established
After successfully installing iOS4 yesterday and using it for awhile, this morning I started receiving the "could not back up because a session could not be established with the iPhone" message. This occurs on sync after several sync messages have displayed in the iTunes status window.
I have restarted the Mac, reconnected the iPhone, blown out all the connectors, etc.
?????
I have the same problem. Even more so: 10.6.4 completely ruined my iMac, to the point everything I did became a beachball party. After 20 € of phone calls to AppleCare, had to erase the HD and restore stuff from an early-June back-up. Furthermore, only updated to 10.6.3.
Now, regarding the iPhone, I get the same message everyone in this thread is getting: *"..because a session could not be established."*
I really don't want to restore to factory settings and - again - resintall everything and lose progress on games (+30) and reconfigure apps. I did this already. Did NOT solve the problem.
I am at a loss for words towards Apple. Who tests their software. Drunk managers that leave phones on bars? Is that it?
Also: tried the "Hard reset" option. Problem remains.
When restoring to factory settings, or choosing to backup from a backup session, I get the message "won't change the iphone's firmware", meaning, i won't be able to go back to 3.1.3, right?
This and 10.6.4 = fail. Its the end of any early adopting from me.
Message was edited by: Henrique Cabral
Similar Messages
-
I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please
This has happened to me a couple of times and what I do is quit iTunes and restart my Mac and then try again and then it will work.
If iTunes has already created the backup, you should still be able to restore from the backup when you are connected to iTunes. Right click on the iPad name on the left side of iTunes and select restore from backup. After the process completes, sync with iTunes to transfer all of your apps, music, photos and other media back onto the iPad. -
I'm trying to sync my iPhone 3G S to my computer. Midway through I get a message "iTunes cannot backup the iPhone because a session could not be started with the iPhone." I have not connected my phone to any other computer and this just began happening within the last day or so.
PLEASE HELP!!One of your backup files might be corrupt. Try following the steps in this article to correct the issue: http://support.apple.com/kb/ts2529
-
My iPod cannot be backed up by my computer. I have tried automatic syncing and manually backing it up, but neither have worked. HELP!!
Try the following:
iOS: Troubleshooting backup issues in iTunes
It includes the following symptom:
iTunes could not back up the iPhone because a session could not be started -
When synching by 4th gen ipod touch it skips the first step - backup-, does steps 2 through 5, then I get a message the ipod could not be backed up because a session could not be started with the ipod. How do I fix this? Do I have to restore my ipod? Will all my apps be erased?
You have to have an internet connection, either wireless or through a computer with iTunes. When you choose Software Update you can only update to the latest version for your iPod Touch, iOS 6.1.6
-
my i pad 2 is stuck,even cannot switch off and cannot restore
Hi mattlim,
Welcome to the Apple Support Communities!
I understand that you are receiving an alert that your iPad could not back up because a session could not be started. To troubleshoot this situation, I would recommend reading over and working through the information in the attached article.
If you can't back up or restore your iPhone, iPad, or iPod using iTunes - Apple Support
Best regards,
Joe -
iTunes told me to delete my backup folder when I was having problems syncing my phone to my computer. After that it wouldn't work at all. After trying and trying I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet ". What the **** itunes? Nothing is working!!
I wanted to update my iTunes so I could sync my phone to my computer and update my phones software so I can use the latest apps that need a 4.2 or higher.
This is not fun for me so if anyone knows what I can do to fix this please help. Is it possible to download the "cabinent file" with the lastest iTunes?
Thank you.
-Kait
My phone is the iPhone4 and my computer is a Windows VistaI doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
Otherwise, do you get an error code? This might point us in the right direction. -
What do I do about message:- iTunes could not back up iPhone because a session could not be started with the iPhone.
Read https://discussions.apple.com/thread/5010662?start=0&tstart=0
-
I'm totally frustrated by iTunes and don't know how to solve my problem. Like a lot of people on here I'm not able to sync or back up my iPad2 with my iTunes (version 10.4.1.10). I'm running Win 7 Ultimate 64 bit. My iTunes worked just fine until the 10.4.xx updates came out and since June I've not been able to back up or sync the iPad2.
When I connect and try to sync I get the error message, “iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad.”
I've deleted all the old backups so there are none on my system. I've deleted iTunes and re-installed the 64bit version several times but it has not made any difference. I've read and followed several suggestions on these boards about how to remove and reinstall everything but none have worked yet. I'm stumped here.I had the exact same thing with my shuffle - same error message saying that it was corrupt so I restored it (wiping everything in the process) and the same message came up as soon as it reloaded. Thank god I didn't try it with my iPod or iPhone first. So many issues with this new version of iTunes!!!!!!!!
-
At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer". Any ideas on how to resolve?
See:
iOS: Troubleshooting backup issues in iTunes
Try going to iTunes>Preferences>Devices and delete the existing backup so iTunes creates an entire new one vice changing the existing one. -
Yesterday I upgraded my iPad Air from 7.1.2 to 8.3 after holding off upgrading until now. Before the upgrade I backed up the iPad without any problems but since the upgrade I can't back up the iPad – it goes to step 2 of 4 and stays there for ages, and then I get a pop up box saying "iTunes could not back up the iPad "... iPad" because the iPad disconnected."
I've just tried setting up iTunes on another PC and backing up the iPad to this iTunes and got the same error message so it's not the iTunes setup on either computer (Windows 7 PCs).
Everything I've tried so far seems to be working on the iPad but I can't do any backups.
Any suggestions on what else to try will be much appreciated.Sometimes resetting the iPad system helps. Did you try that? If not, try it. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen, then let go of the buttons and let the iPad start up. Then try to backup again.
-
I get this message when syncing my Ipod touch "itunes can not back up the ipod because a session could not be started" any ideas?
Have you looked at the previous posts on the right side of this page under the heading "More Like This" with your same problem?
-
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"
Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup
-
Since 2 updates I started getting iTunes could not back up the iPhone 'my IPhone' because a session could not be started with the iPhone. This is happening with my iPad and iPhone. I see hundreds of complains on this issue starting from last year and obviously Apple has no clue how to solve this error. I went through the solutions and spend over an hour deleting backups resetting lockdown, restarting and nothing is working. Are they serious to ask us to disconnect all other USB devices to sync our equipment everyday to solve their problem? iTunes is the worst program I have seen on the market in the past 10 years. It reminds me of DOS programs that could only do one item at a time. You click a command and just wait and wait and wait. Of course they want me to call customer service, wait for x time to talk to tech support and then spend more time. I don't have the time. I spent a lot of money to get an equipment that should work as advertised and not spend further my valuable time. I have reached my limit with Apple and that crap iTunes. I'm calling for a divorce.
[By the way, your spell check doesn't recognize your own products such as iPad, iTunes and iPhone. Such an embarrassing company.]Do you happen to be running any processes that Apple doesn't want you to use? (Jailbroken?)
Maybe you are looking for
-
Tax code P0 does not appear in any G/L line item
Hi, I am using BAPI_ACC_DOCUMENT_POST to upload the AP/AR Journals. I have a scenario wherein for AP document type 'KA' both the line items are of vendor . One line item though has a special G/L indicator and a tax code to it. When i execute the prog
-
Cannot export to PDF with grayscale PDF in layout
IDCS5.5, MacPro, OSX 10.7.4 I am working on a grayscale teacher's guide that accompanies a CMYK schoolbook. The introduction pages contain miniature pages of the workbook (formatted as grayscale PDF), but InDesign refuses to output those pages as PDF
-
My VI calls SubVIs (all with the same connections) in a loop with one 'call by reference'. It works great in the VI but when I build an Application I receive Error 1003. After that I read in the KnowledgeBase when I build the Application I must add d
-
Very basic questions on JAX-RPC and wscompile
Hello, well, I have this tool that generates java packages. The thing is that this tool needs now to generate JAX-RPC compliant java packages. To verify its compilance, I am using wscompile 1.1.3 build R1 and Sun AS Edition 8.2. My questions are: - I
-
ESS Appraisal Document Adobe Print Error
Hi, we are in the midst of upgrading our system from 4.7 to ECC6. We have noticed that once upgraded, we are getting error when we try to print the performance management document. In Portal, once we clicked on the appraisal document, we click on the