IOS4 update not recognized on Pioneer vsx 1019 AH Receiver

Just updated my 3GS Iphone w/IOS4 update. However when I plug the iphone to my pioneer receiver I am now receiving message on the pioneer that states - no device or wrong device. I cannot pull up the playlist, video's from my iphone. Is Apple coming out with a fix on the IOS4? If not, can I revert the the OS on the iphone to the previous version?

I was told by Pioneer support (must have been reading these forums?) the same fix using the home button and the on/off switch should resolve the issue that I was having with the receiver not playing after a few minutes (the iPod is still playing...). I tried this and it did not resolve the issue. I'm going back to the Pioneer support to see if they have any other resolutions; but if anyone else has figured out a fix, I would appreciate it!

Similar Messages

  • Airplay does not recognise my Pioneer vsx-1122-k on my iPad, I can control my receiver via the pioneer app on my iPad so it is just airplay not a connetivity issue.  My Panasonic Stereo is recognised on Airplay.

    Since upgrading to the latest IOS, Airplay does not recognise my Pioneer vsx-1122-k on my iPad, I can control my receiver via the pioneer app on my iPad so it is just airplay not a connectivity issue.  My Panasonic Stereo is recognised on Airplay.

    Hi
    I don't know if you're still having this issue but there is a way round it as I'm having the same troubles.
    I've just spoken to Apple about it and found out:
    – If you have a Mac made before Mid-2011, it doesn't have a piece of hardware needed to take advantage of the 'Airplay mirroring'
    – So you can update to a later version 10.6.8+ but this won't help at all
    The way round it:
    – Download 'Airfoil' and install this
    – You can then play music from any defined source (Spotify, Quicktime etc) through your Airplay connected speakers
    So sadly, for those have a Mac from before Mid-2011 there's isn't an option that's as easy as Option-click on the sound icon to switch to Airplay speakers.
    Hope that helps, I can now get on with the rest of my day now after sorting this out.
    Adam

  • Pioneer VSX-1019 Receiver Input Switches

    I purchased a Pioneer VSX-1019AH-K receiver a few months ago, and have had the annoying problem of the input automatically swtiching a few seconds after being turned on. When the receiver is first turned on it will switch to the correct input for the desired input device (Blu-Ray, Cable Box, etc), but after about 5 seconds it will switch to a different input. I've checked Pioneer's website and it was no help at all. Has anyone else had this problem and know of a solution? 
    Here is my system:
    Receiver:  Pioneer VSX-1019AH-K
    TV:  Samsung PN58B860YF
    Cable Box:  Scientific Atlanta 8300HD
    Blu-Ray:  Samsung BD-P1600
    VCR/DVD:  Toshiba D-VR5SU

    Hello, were you ever able to resolve this problem?  I have the same Pioneer VSX-1019 receiver and am having the same issue.
    I checked your previous posts and it looks like the other user's issue was related to the MultiZone function.  I turned that off on my receiver but am still having the issue.
    I have my components (digital set top box, PS3 and WII) running into the receiver and 1 HDMI cable running out to my TV (Samsung UN55B8000).  
    If I turn just the receiver on everything is fine - the receiver stays on the input it was on when it was last turned off.  As soon as I turn the TV on however, after a few seconds the receiver automatically switches to the TV/Satellite input.  From there I have to manually switch the receiver to the correct input based on the device I'm using and it stays on that input.
    Something about the TV turning on seems to be kicking the receiver to switch to the TV/Satellite input.
    Any ideas?

  • Airplay does not connect with pioneer vsx-1121 anymore

    After latest iTunes update airplay function does not connect with my pioneer vsx 1121 receiver anymore. I can see the reciver in the list when I click the airplay button but it does not connect and music keeps playing trough the laptop speakers. I am running win 7 and everything worked fine before the latest iTunes update.
    Any ideas what is preventing the proper connection?

    I am having the same problem.  From my Ipad the pioneer vsx-1021K is visible.  It connects, sound begins then stops after 2-3 seconds.  This began in the last month.  Infuriating.   I can stream from my android to the device using double twist.  I can stream to other devices like apple tv and Android apps like "hifispeaker" (a Airplay receiver for android).
    What changed?  It seems like there is something in the most recent Ipad updates?  Some interfering application?
    the Ipad is using IOS 6.1.3

  • 11.1.4.62 itunes update not recognizing ipod touch

    Please Help.  Did the update to Windows 8.1 yesterday and now iTunes does not recognize my iPod(s) etc.  I looked in Windows and device shows up but now in iTunes.  I downloaded the new iTunes and reinstalled (Repair) and that did not help.  Anyone have any suggestions at all? 

    See section 5 of TS1538: iOS: Device not recognized in iTunes for Windows.
    If that doesn't help it may pay to tear down and reinstall iTunes in the following manner...
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Captivate-6-0-1-Update.dmg Update not recognized on Mac

    I have Captivate 6.0.0.199 but when I try to use the Help window to update, it is grayed out.
    I downloaded Captivate-6-0-1-Update.dmg directly, but when I try to launch, it says:
    "The following disk images couldn't be opened. Captivate-6-0-1-Update.dmg not recognized."
    My system is Mac OSX Lion 10.7.5 Processor 2.26 GHz Intel Core 2-Duo Memory 4 GB
    I have administrator rights to my computer and am trying to run this as the Admin.

    Do you have any other Adobe Application installed, are you able to check the updates and download & Install them using Adobe Application Manager
    Thanks,
    Anjaneai

  • Tiger 10.4.8 update not recognized

    Aaargh, I could scream...... after several days of trying to download the new Intel 10.4.8 update (internet connection would not hold out the 17 hours required) and after trying all week unsuccesfully I read through the forums it would be better going through Apple so yesterday I changed to the Apple download and successfully downloaded this.....
    http://www.apple.com/support/downloads/macosx1048updateintel.html.
    Now after 17 hours it has downloaded and now happily tells me mounting failed as it is not recognized, why oh why?
    I have looked at some previous questions and have found a recommendation to download the combo, is this where I went wrong?
    I hope I have made sense on this, if I haven't apologies in advance. Can someone please let me know what is wrong.
    Thanks
    Btw, my computer is a couple of weeks old and shipped with the 10.4.7 installed if this helps.

    Or, if there are no Apple stores nearby in Spain, you could try to find someone or someplace with broadband access that you could use to download the file again. Until then, it generally won't hurt to sit at 10.4.7.
    BTW- 17 hours is way too long. I can download the file in 6~7 minutes on cable.

  • Software Update Not Recognizing Needed Updates

    On my iMac, I needed to re-install Leopard - following which, Software Update is not recognizing that it needs to update - Safari, Mail, etc. By example, Mail is "stuck" on version 3.1. When Update runs, I get no updates available. I guess all the updated software is in the Previous System folder. What's the best strategy to fix this? - is there a way to reset what Software Update thinks it's already done or should I remove the previous system folder?
    Thanks in advance!

    tried permissions - no luck there.
    Thanks for the comment re having new & old versions of software - that may be the case, as after re-install of Leopard, the previous system (which in fact has the newer versions of Mail, etc) was saved to a folder.
    Sorry, I'm usually more on top of these things - but I'm not really sure how SU works - I'm now assuming that it's finding the newer versions in the Previous System folder - sound right?
    As a followup - is there any reason to save the "Previous System" if all is working after a reinstall?

  • 4.1.2 Update not recognizing headphones

    I upgraded to 4.1.2 and now the phone is not recognizing when headphones are plugged in. I'm tried several headphones that all work on other devices. I've also ensured that there is no lint in the headphone jack.

    This is just a guess:
    Settings->sound-> tap on "Audio effects" make sure it is "ON" ->Speaker-> equalizer->balanced
    Settings->sound-> tap on "Audio effects" make sure it is "ON" ->Wired Stereo->Effects profile->Live stage
    Settings->sound-> tap on "Volumes" make sure volume is up on all available options, "OK"
    Message was edited by: Geoffrey Seals

  • Safari 7.1 update not recognized

    When I open the App Store on my iMac with Mavericks, and click on the UPDATES tab, it tells me that on Sep 20 I installed 10.9.5.  Safari 7.1 was installed on Sep 21, and 2x on Sep 22 and it still wants me to update again.  When I have Safari open and click on "About Safari" it tells me that I still have 7.0.6.  I even restarted the computer to see if that would work but it didn't.  What do I need to do to get this recognized and stop the updated notices from App Store.  Thanks.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
              /var/log ▹ install.log
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. The contents of the log will appear on the right. Each log message begins with a timestamp. Select the messages from the time of the last installation or update attempt. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again. Select the new messages that appear. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    ☞ If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ When posting a log extract, be selective. Don't post more than is requested.
    ☞ Please don't indiscriminately dump thousands of lines from the log into this discussion.
    ☞ Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting. You may need to use a text editor with search and replace, such as TextEdit.

  • JDeveloper 11.1.1.4 Update Center - Updates not recognized

    I am installing JDev 11.1.1.4 on a brand new laptop. Connected to all the Update Center repositories to download everything out there. The UC goes through the download and application process but does not seem to update my installation. Reason I know this is I return to the Update Center and ALL of the updates I just downloaded and applied are still listed. Barring going and downloading all the updates manually and doing the "install from file" thing, what's the resolution?
    Anybody else seen this behavior? It isn't a network connectivity thing as I see all the repositories and updates and it actually takes a while d/l all the updates. Just doesn't seem to be recognized by my JDev as applied.

    I think the issue with these is that the min and max versions in the extension files haven't been set properly by the extension developers, so they continue to show up in the UC, even when they may have been installed. I'm looking into it.
    The harvestor extension for instance, installs a lot of files in the {ORACLE_HOME}/jdeveloper/harvestor folder, but I don't have a clue what this is really supposed to do so it may very well be installed properly and I just don't know where the interface is located to run it.
    The AIA Service Constructor 3.0 is the only one that is publicly released and I just pushed an update from the team that should remove the issue that you're seeing. It does install even though it still shows up in the UC. Take a look at Tools --> Preferences --> Extensions and you'll see it in there.
    The other AIA and Guide are from the Internal UC and they can be doing just about anything. Consider that UC beta and you get what you get. :-)
    --jb                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Captivate 4 update not recognizing that Captivate 4 is installed

    Downloaded the patch but when I run it, the splash screen loads and states that Captivate 4 is not installed on my machine - only option provided is to Quit the update. I'm running this on Windows XP and Captivate 4 has been working fine with the exception of lousy image quality. I wanted to try the update to see if this fixed the graphics issue. I tried the update install from a folder on my desktop and also from the Captive 4 program file folder - same results. Any ideas?

    I just ran into this problem with Captivate as well. I uninstalled Flash Player 10.1 by going here: http://kb2.adobe.com/cps/141/tn_14157.html
    I then downloaded an archived Flash Player here: http://kb2.adobe.com/cps/142/tn_14266.html
    It seems the main installer does not incorporate the Active-X version of Flash that Internet Explorer needs. There should be several Windows installers in the download. For example, I used Flash Player 10. The following Windows files were in the package:
    •    flashplayer10r45_2_win.exe
    •    flashplayer10r45_2_winax.exe
    •    flashplayer10r45_2_win_sa.exe
    Install the first one and second. The second file is the Active-X Flash version (I’m thinking “winax” means Windows Active-X), which Captivate needs to run. I don’t think you need to install the last file (“win_sa”, I’m thinking the “sa” stands for stand-alone).

  • Updates not Recognized as Updated-- help!

    Hello!
    I've had this problem for a while now.  My Creative Cloud tells me I have 5 updates. I update them and it says it's done and the "5 Updates" warning goes away. Next time I turn on my computer (has to power down and back on) it tells me I have the same 5 updates.  The details about each update are the exact same, so I know they are not newer updates. I am not totally sure if the updates are failing to install or if Adobe CC is failing to recognize that the updates were installed and I don't need to update anymore.  I apparently have the CS6 family as well as the CC family so I don't know if that is messing it up.
    At one point I thought I fixed it by deleting Prelude, that worked for a while, and now the problem is back.  This has held true through an update the the Creative Cloud Manager itself.
    You can see in the first picture below that I updated the 5 apps 1 day ago. You can see on the 2nd picture, taken 2 seconds later, that it wants me to update those same apps. 
    Please help.

    Hi Jeff, I'm on Mac OS 10.8.4
    Sorry this is all new to me. I don't see a "Library" folder inside my username. Only as a root in my Mac HD, next to "Users", not inside it, as you see in my screengrab below. 
    I've tried to makde the fixes to the Permissions, as I understand them, in the root/Library/Application Support.
    That folder was listed as "read only" for admin, so I changed that; and I made sure the Adobe folder was "read and write" for admin.
    I'm really not sure if I'm doing any of this correctly.  I tried looking in the install log for After Effects... saw the following errors.
    I hope some of this works.  Will keep you posted after I turn off/on computer.

  • Ios4 update- not worth it

    After having made two attempts to install the update, and aborting both times after what seemed like a freeze, then reading all the problems people are having trying to install, I've concluded that it's not worth trying at the present time. The only thing I was really interested in having was the folder feature, and now I've read that you can only get 12 apps into a folder. My touch (2nd gen) is working really well and I don't want it messed up. I think I'll wait for Apple to straighten out any problems in the next revision before trying again. Just my 2 cents.

    I totally agree. I would also have liked to have the folders and multi tasking features, but it is just not worth destroying my Touch for these features. I am still happily on 3.1.2. The same update issues were also reported with 3.1.3.
    Will Apple ever release an update that works?

  • Updater not recognizing new updates

    I've run the Updater and updated 18 apps.  When I restart my computer the Updater notifies me that I still have 18 new apps to download, even though under the Home Tab it indicates that I have just updated the apps it says I need to update. I have logged out and quit the Updater and restarted, but it still tells me I need to update the same 18 apps.  Any solution to this?

    CC desktop lists applications as "Up to Date" when they are not
    -http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
    -and added step https://forums.adobe.com/thread/1529654
    or
    Repeated updates http://helpx.adobe.com/creative-cloud/kb/updates-repeatedly-applied-cc.html

Maybe you are looking for