IOs4 upgrade, Now car stereo doesnt work with iphone

upgraded to Ios4 a few hours ago. Went to my car and plugged it into the usb port of my pioneer stereo and it says " Not compatible "
My stereo has always worked with my iphone.
PLEASE FIX THIS ASAP . APPLE

I've got the AutoPilot from Griffin, and I haven't seen any issues with it. Anyone with one of those and have concerns shouldn't worry; it'll continue to work.
Granted, it interfaces with the iPhone via the dock connector, but eventually goes into the car's audio system via the auxiliary jack, so the USB connection is probably what the issue is with other audio systems.
I've also noticed the "This accessory isn't meant for your device" message doesn't give you the choice of going into Airplane Mode; it just reminds you that you'll probably get interference.

Similar Messages

  • Car stereo not compatible with iPhone since iOS 7

    Since installing iOS 7, my iPhone 4S is no longer compatible with my Pioneer car stereo to use video. I can still access my music and contact for bluetooth, but when I try to use Netflix for example, it gives an error message on my phone. This was working normally when I was using iOS 6, so there is a glitch with iOS 7. I can't seem to get any help from Pioneer or Apple support...so I'm asking you folks to help me please! Is there a way to get this working again or do I have to wait for the next software update?

    In another thread on this issue, Brendan writes:
    Turns out restarting my car and/or rebooting my iphone "fixed" the issue. Apparently this was unrelated to the iOS 7.2 upgrade. Honda + iPhone has been rock solid (even if the Honda Fit UI is terrible), so I'm not sure what to make of this problem. Maybe a glitch? Who knows.
    Here is the URL for that thread: https://discussions.apple.com/message/25211736?ac_cid=tw123456#25211736
    His suggestion worked for me: turn off your car, completely shut-off your phone and let it sit a few minutes. Then reboot phone and start car and try again.
    Good luck!

  • MP3 Car Input not working with Iphone

    When I plug my Iphone into my car's mp3 Aux input using my current mini plug connector (which works fine with my Ipod)) the music continues to play out of the iphone and not through my cars' stereo. The car is set correctly as the ipod works fine. Am I doing something worong?? Does the iphome not work in that situation? Any suggestions would be appreciated. Thanks

    because of the iphone's recessed headphone jack, it's likely your cable is not fully inserting into the jack. don't try to force it in there. people have done things from shaving down the plastic on a jack to trying to shop for adapters that fit.

  • What bt car radio will work with iPhone ?

    Simple question, I'm looking for a aftermarket radio that will work with my iPhone 3G.
    Play music over bleutooth, make hands free calls.
    No additional cables,only BT,iPhone in cradle/charger.
    I did find a few radio's that should work, but maybe people here have experience with working systems so I'm sure they work in real life,and not only in the advertisings.
    You can google all over the internet, and never find a clear answer.....so maybe we can make the final topic here, for everyone to find....

    We have tried everything that ha been suggested
    Sorry, but that tells me nothing - one man's "everything" is another's not quite enough.  When I said "EXACTLY", I meant just that...  What happens in vagueness, stays in vagueness!

  • CAN ANYBODY HELP WITH BOOTCAMP ON MAVERICKS? SINCE UPGRADING TO MAVERICKS BOOTCAMP DOESNT WORK WITH MY WIN7 DISC THE PARTITION STOPS HALF WAY THROUGH THEN CRASHES MY MAC PRO

    SINCE INSTALLING MAVERICKS I HAVE NOT BEEN ABLE TO INSTALL WINDOWS 7 ON MY START UP DISC.... WHEN I GO TO INSTALL AND PARTITION THE DISC IT LOADS TO ABOUT A QUARTER OF THE WAY THEN MY MAC PRO CRASHES

    Hey, I had windows 7 installed on my mac pro which is a 2013 model with the partition set at 80 and it worked fine then when i upgraded to mavericks with the free download and tried to access bootcamp windows 7 was gone so when i tried to upload it again thats when the trouble began, i have tried about ten times and even made a copy of windows and tried that but when i do my partition it loads to about a quarter of the way and crashes my hole computer were i have to press and hold the power button

  • Aftermarket car charger not working with iPhone 4

    I have and aftermarket input in my 2005 Honda Odyssey. It includes a 30-pin connector which provides the line level input and a charging to an ipod. I have been using just fine with my 2nd gen ipod and wife's 2g iPod Touch with no problem. I just bought a new iPhone 4 last week and plug it in and get the message "this accessory is not optimized for this device" "charging is not supported". Is this just a software block or is the power requirements that much different with the iPhone. The input works and the iPhone even respond to a pause signal when I shut off the car (input device pauses your ipod when you shut off the car), but no charging. I hate to think I have to shell out another $50-60 for a new input for my car. Any thoughts?
    I can't remember the name of the input device. I think it might be PIE.
    Thanks

    "Scosche Passport - it's a quality product that solves your problem.... "
    Let me stop you right there. The scosche passport WAS a good product. I purchased one last year at the apple store when I was making a 9 hour trip up north and needed to charge my iPhone 3GS on the way. It was a brilliant product, all the way up to the launch of iOS 4.
    I don't know HOW Apple botched this update, but the fact that I am now using the same hardware (the 3GS), attached to the same scosche adapter in my car, and a software update to 4.0 has broken my ability to charge. It is absolutely insane.
    Needless to say I'm furious. I'll be ringing Apple on Tuesday, as they're not signing 3.1.3 anymore, so I can't even go back to a chargable phone.

  • Will a voice dialing car kit feature work with iphone 3g?

    I am a new iphone user, and I know it doesn't have voice dialing, but I can't figure out if I can get around this by buying a car kit that offers voice dialing (e.g. parrot or motorola). Does this feature on the car kit require that the phone do voice dialing itself, or does it stand alone?
    Or ... any chance of an app being developed/released to allow voice dialing on the iphone directly?
    Thanks.

    Tried it. It works, but isn't a perfect solution. Here's the direct link to the app.
    There's a brief one-time initialization. With the app active, you need to press and hold a large icon while you speak. It searches, finds the contact, and presents you with a list of 4 possible numbers (main, home, work, mobile). Even if you have only one type of number (e.g. just the mobile number), you get all 4 buttons (the others just say 'not available') and have to press the button to make the call. It only works via the built-in mic, not bluetooth.
    So, assuming you have the app open when you start driving, you'd need to press-and-hold while you speak, then locate and press the number choice. That's two looks at the screen, and that assumes it gets the name right (it did a pretty good job in my testing, missed one, and the "next name" button is pretty small. Easier than scrolling through contacts, though.
    IMHO, a better bet for frequently called numbers is a Utility like Speed Dial, definitely worth the 99¢.

  • Help How do I get car bluetooth to work with iphone

    I just bought a Santa Fe with bluetooth but when I try to pair my 3GS iPhone it will pair then gets disconnected. Does anyone know why?

    I have a 2010 Hyundai Tucson and I have intermittent problems with the bluetooth using my iphone. It's a 32GB 3GS with ios 4.0. I had no problems pairing it.
    Most of the time, everything works great but about 20% of the time I try to use the bluetooth and the NAV screen indicates that there was a dialing error. The weird thing is that the phone menu on the NAV screen always shows 'connected' and through the speakers I can hear the phone dial, but then the error appears on the NAV screen (phone menu). What's strange is that the phone itself continues dialing but the call doesn't transmit through the bluetooth. I have to manually use the phone at that point.
    It also has a tendency to lock up the NAV screen for a couple of minutes afterward, meaning I can't switch back to XM. When this happens and I look on the bluetooth menu on the phone itself under 'Tucson', the phone says "Not Connected".
    This happens when the phone is connected via the USB/Aux cable as well as when it's sitting in my pocket.

  • Bought iPhone 6 yesterday. Also bought dock works with iPhone 5/5s. And cord connecting iPhone 6 to USB port on car stereo. No sound comes out of dock or car stereo. In store today, iPhone 5 running ios 8 worked on dock, not iPhone 6. When Apple fix?

    I bought an iPhone 6 yesterday. I also bought a stereo dock that works with iPhone 5/5s. And a cord to connect iPhone 6 to USB port on my car stereo. No sound comes out of the stereo dock or car stereo. In Best Buy today, Sales Associate tried his iPhone 5 running iOS 8 on a stereo dock. It worked, but my iPhone 6 didn't. When will Apple fix this problem? Or is Apple pushing everyone to Bluetooth?

    The iPod feature that plays through USB in my car does not work with my iPhone 6 either.  I called AppleCare and they said that the car audio system will need a firmware update.  Don't know if Apple is just passing the buck, but that is what I was told.  Thank you for posting.  I know now that I am not the only one.  Thanks also for posting about the iPhone 5 running iOS 8.  I gave away my iPhone 5 to a friend so I wasn't sure whether this is an iOS 8 issue or an iPhone 6 issue and your experience seems to confirm that it is a problem with iPhone 6.  I guess I will just be using Bluetooth in my car, at least for now.

  • Alpine car stereo works with iPhone

    I've consistently said it would require new hardware but I just found out that firmware 1.1.1 on the iPhone works with my Alpine car stereo just fine.
    It does ask (doesn't it always?) if you want to go to airplane mode to reduce interference, but it charges and plays properly, allowing all the iPod functions (list selection, skipping back and forth through tracks, etc). It's very cool (although I still think I'll use my Nano for this -- however in a pinch it might be something I'd do).
    For all those looking for a "car" solution the Alpine is at least working just fine. Perhaps other car iPod solutions work with the 1.1.1 update as well (I can't test to be sure). One thing for sure -- it did not work properly prior to this update (I couldn't even get it to charge).

    Mike Kelley,
    Did you update to 1.1.1 or 1.1.2 which was released this week?
    Thank you,
    Nathan C.

  • I upgraded my iphone to ios 6 but now it isn't working with itunes

    I upgraded my iphone to ios 6 but now it isn't working with itunes and my itunes will not upgrade. It is stuck at 10.6.1 and my macbook is not compatible with 10.7

    A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
    iTunes 10.6.3

  • Cmss 3d doesnt work with dolby digital live pack

    0cmss 3d doesnt work with dolby digital li've pack4 From the page of Dobly Digital Li've pack
    "Stereo content (MP3, WMA, CD audio or games) that is transformed into 5. surround sound using Creative CMSS-3D or DTS Neo:PC can also benefit from this encoding scheme that will further enhance the entertainment value of your Sound Blaster X-Fi."
    with that said, i bought the pack that has both DDL and DTS Interacti've. but while playing music my reciever only gets front left and right channels. No sound comes from the center or rear channels. This is with CMSS 3D on. With analog all 5 speakers work. Before installing this pack, my reciever got PCM input from the optical line. Thus only the front channels working. now with this pack the speaker recognises that the signal is Dolby or DTS yet, only the front channels work. in short there is no difference with this pack.
    could someone please explain to me how to get the whole 5. working with Dolby or DTS
    thank you
    Sound Blaster X-Fi Platinum, Driver 2.8.003
    Windows 7 x64 Build 700

    thank you for the promp reply
    the problem was with the reciever. just a change in setting was all it took
    but now i have anoter problem
    how do i bypass dolby and dts signals from movies to my reciever
    before i simply had to set spdif out as default sound device and set ac3filter to spdif passthru
    now the driver panel tells me that SPDIFOut will be exclusvely be used by DTS Interactiv. it doesnt pass the signal through from Media player classic or powerdvd.
    am i expected to turn off DTS Interacti've or DDL when watching a movie and needing to pass on the signal?

  • Seagate 1.5TB doesnt work with mac

    hi, i have a seagate external hard drive 1.5 TB, i generally use it for my windows laptop. now i bought a mac and it doesnt work with my mac. Am i doing some thing wrong..?

    Are you planning on using the drive with Windows? If no, then use Disk Utility in Applications/Utilities to reformat the drive. Formatting erases contents on a drive. Copy the data to another source before formatting.
    Format the external drive as Mac OS Extended (Journaled) - Partition Map Scheme: GUID
    Select Drive (top name) then click on Erase tab.
    Under Format select Mac OS Extended (Journaled)
    This should format as GUID when erasing but sometimes you need to click on an Advanced tab and select GUID.
    If you do plan on using the drive with Windows machine, format on Windows machine as exFAT.

  • Time capsule doesnt work with telia bredband no wifi

    Time capsule doesnt work with telia bredband no wifi.  Time capsule and its wifi worked in the beginning, but now it doesnt. I have tried everything without success.

    There is no question.. so if it is a statement of resignation.. then if under warranty and faulty Apple will fix it/replace it.. if not dead you will be given it back.
    Are you using Lion? If so did you download 5.6 airport utility?
    Plug the TC into a computer by ethernet.. hold in reset for 10sec.. and then redo the setup.
    Give TC and wireless short names and no spaces and no special characters.. lock the wireless to manual a/n-b/g and fix the channels.
    Then if it doesn't work most likely faulty. Otherwise it is just setup is wrong.

  • I have been trying to get my ibook g4 fixed from apple for 6 years now. my ram doesnt work and the logic board is f'd up aswell... i know 12 people that have had the same issue. 4 of them got there ibooks replaced. anyone know what to do?

    i have been trying to get my ibook g4 fixed from apple for 6 years now. my ram doesnt work and the logic board is f'd up aswell... i know 12 people that have had the same issue. 4 of them got there ibooks replaced. anyone know what to do? all 4 ibooks were replaced outside warranty, why wont apple help me...

    Apple supports most of their computer products for a 7 year period, could be that your IBook is well past any kind of help.Secondly parts are no longer being made for this machine and never will be again. Finally I find it hard to believe that nothing has been done with this for 6 years.Have you documented the reasons why you were turned down for repairs ? were the replaced Ibooks within a couple of months of warranty expiration? What model is your IBook ? At least if we knew what the model #, some of the more techy types could find out if there were any repair programs for your model.
    Seems odd that you'd hang on to a non-working IBook for that long.

Maybe you are looking for