IOS5.0.1 still no fix for podcasts

Despite probably several reports from myself and others to Apple feedback, nothing seems to have been done do address the problems that have been created since Apple decided to change the format of the music player on the iPad in iOS5 as far as podcasts are concerned. If you are as p**d off as I am about this, can you post your feedback to apple support. Thanks.

Did you add a Date-Added column to the playlist and right-click the playlist and select Copy to Play Order when it's properly sorted the way you wanted?
If not, that's your problem, not iTunes ... my "New Editions" Playlist is sorted the same way and it works perfectly.

Similar Messages

IOS 6.0.1 update still no fix for App Store Purchased section

iOS 6.0.1 update still no fix for App Store Purchased section. Keep crashing after few seconds and kicked back to home.
Does apple even aware of this problem???

Hi, thanks for your comment.
The steps that I have dines so far is similar to you I think. I have all so tried a restore on all my devices running 6.0.1 and still nothing. Have spoke to staff in an Apple shop and they were no help at all and kind said it was my devices that had the issue and nothing to do with anything at Apples end. Have all s spoke to staff in a premium retail seller of Apple products and again, no he,o what so ever. I think it's clearly a issue at Apples end with the serves sending out that data when request. IOS6 is full of bugs and runs so slow it silly.
I'm thinking that Android is the way the forward after all the problems I've had with iOS6.

New fix for Podcasts app

Hello,
After a long period of bad problems with Podcasts app, I finally got it right.
This is a fix so simple to do that most people will do it wright first time. There is no need to call your Mac Geek friend to help you.
This fix solves all problems you have with this app, even the one that is eating up your data plan in iOS6.
This fix also works with all iOS devices on iOS 5 or iOS 6.
You must have an Macintosh computer with the latest iTunes installed in order to this fix works right. (I guess).
Here is the fix:
1) Connect your device to your Mac and make the backup ofr your device. After the backup is done, disconnect your device.
2) If you have Sync Podcasts enabled in iTunes, unenable it and hit the Sync button on the lower left side on iTunes. iTunes will not send any Podcast to your device.
3) Now, it is important to have in the iTunes (Mac) all subscriptions your devices have. If you don't have, it is the right time to do it. Subscribe to exactly same shows. We will use it again later, don't skip this step.
4) Open in your device the Podcasts app and and unsubscribe all your subscriptions.
5) Press Edit in the Podcasts app. In your iPad it is located at the upper right hand side and in your iPhone it scroll up all your show icons and the Edit button is located at the second bar from top to botton. Press the X and delete all your subscriptions.
6) Kill Music and Podcasts apps. Hit the Home button 2 times and press the X icon on the upper left side.
7) Go to iTunes in your Mac and open the list of App you have and delete the PodCasts app in the list and delete the Podcasts app in your devices.
8) Now, connect your device again and wait it sync.
9) In iTunes (Mac) click in your device on the left side of the window, and select Podcasts index on the top of the window. Click on Podcasts. Enable Sync Podcasts. Enable Automatically include all unplayed and episodes of all podcasts.
10) Press the Sync on the lower right side.
11) In your Device open the Music app, you will see Podcasts returned to work in the Music app.
12) Now you can listen to your podcasts and it keeps sync of what your are listening.
Deleting the Podcasts app was the only way to make it work right.
Hope it helps you too.

This also does not restore the ability to add podcasts to music playlists - a function that I used on a daily basis to mix spoken word audio. (Podcasts, audiobooks, MP3s) I often listen to these playlists outdoors in a cold climate and cannot unbundle myself to switch between apps. Thanks Apple, for making things more difficult!
I'm getting tired of ripping all my podcasts into AAC or MP3 in order to accomplish an operation that used to be effortless and if there is not an official fix for this by the time I receive my bonus in February, it is going toward an Android phone! (I've already purchased an S3 for my wife for Christmas to compare.)

Still no fix for superdrive not reading any disc at all?

I've searched through the forum and it seems like there's still no solution for the superdrive not reading any sort disc at all. I have had this imac for almost a month. I rarely have used the superdrive but was trying to play a normal audio cd tonight and upon further investigation found that the drive is not reading any type of disc.
If a disc is loaded, the drive whirs/beeps 4-5 times while trying to read the disc and then ejects it. this happens for dvd movies, audio cds, osx install disc, etc.
I did successfully play and rip some cds a few weeks ago when the imac was first purchased. I have not inserted discs often enough in the past to substantiate that upgrading to 10.4.5 or 10.4.6 affected the drive's performance.
Think I need a new drive or could this be software related?
imac intel core duo 17" Mac OS X (10.4.6)

I want "solved"
You can add me to the list too - I check this page frequently for a reply from an apple representative - to no avail.
My computer is less than 2 years old, purchased brand spankin' new, w/o the warrantee - but hey when you pay that much for your 'puter it should not break down at ANY time during (at least) the first 5 years, unless gross negligence and disregard is involved (which is is not).
I would not categorize myself as being in the 'high usage' category for burning either dvd's or cd's, but here I am less than 2 yrs after purchase w/ a superdrive that can't even read a store-bought cd, and oddly enough the problems I am having DO seem to coincide w/ download of a 'security update.'
Hmmmm......
I would like, at the very least, a helpful suggestion from someone working for Apple - if not an acknowledgement of an actual issue with a faulty (expensive) product.
A guarantee of satisfaction with a purchase should not be wrapped up in purchase of a service plan - good customer service is good policy, and should be provided as a means of standing behind the quality of a product you both sell, and believe in.
There is no good reason why my computer should be broken, and there is no good reason why it shouldn't be fixed - and I see a lot of you have even more reason for complaint than I do. It is irksome in the extreme that this issue seems not to warrant the attention from anyone who can make a difference to our plight.
One would think that a drop-down menu on an official web-site would have a better response rate from affiliated 'professionals' - but we all know the old adage about assuming...
Hey - maybe customer service really is dead - and I might believe that if it weren't for the fact that I respond, personally, to customer e-mails on a daily basis...
Where is our response?
I apologize for the lengthy "blog" - but short and sweet hasn't done the trick..maybe this will?? We can only hope...

Is there still no fix for airtunes?

can not get airtunes to work at all with airport express. the speaker thing in the bottom right of itunes doesnt even show. ive seen posts for fixes for macs, but nothing for xp. and ive not seen anyone else complaining about it.. did i miss a fix or something?

Hi itsjustnoise,
Welcome to the forum! I trust you've tried the basics? In Airport admin (which I'm sure you have a form of on the XP side). Open it up, click configure on your AEX. You'll see tabs for Airport, Internet, Networking, Port Mapping, Access Control, WDS, and Music. Click "Music." Make sure you've checked "Enable Airtunes on this base station"
Over in your iTunes music player, go to preferences, make sure under the "Advanced" tab, in the "General" section, you have clicked "Look for remote speakers connected with Airtunes"
Check that. If still no love, I can't help you any farther.
Good luck

Still no fix for Thunderbolt front facing camera?

I have tried all the online known fixes for this issue , clearing data, restarting phone, removing all other camera applications, and still cannot get my front facing camera to work on my Thunderbolt. As soon as I select the front facing camera, the application closes-without any error message-and brings me to the home screen. What is going on? I was able to use it this Spring, and then all of a sudden I can't use it anymore. Please help.

This has to be an VZW OTA error or something, because my Moto Droid and my kid's HTC Droid's front-facing camera stopped working almost simultaneously. Very suspicious that would happen under any circumstances.
Before you do a hard reset, try this:
Pull the SD card and your camera should start to work again.
After that, you can put the SD card back in, and it should still be working.

Still no fix for Photoshop Install / Update Error? (Exit Code 15 - inconsistency in installer db)

I have tried every suggested fix to no avail... what gives Adobe?
- Removed all versions of Photoshop
- Started in safe mode
- Used cleaner tool
- Used plist method
All apps update except Photoshop and I can't install at all on other MacBook Pros.
Can we please get a fix for this? So many threads on this topic from other customers!!!

After using the Adobe Clean tool, I checked its output log and it mentioned it couldn't find a "caps.db" in the Common Files/Adobe/caps/ folder under Program Files or Program Files (x86).
So what I did: I manually deleted the Adobe folders from:
- Program Files
- Program Files (x86)
- Program Files (x86)/Common Files
After that, I was able to install successfully Photoshop CS5.1 and at this very moment I'm able to install PS CS6 (it's been already 50% of the installing progress).
So far, this action of deleting the Adobe folders from my Program Files folders seems to be sorting out the matter...

Still no Fix for My HH5 A

Been waiting for the fix since Thursday and its still not applied. Saturday it was 6 reboots and yesterday 7 reboots and it looks like DLM has kicked in.
Dont move my post again mods, Stephanie has confirmed I will not be getting the fix so how are my problems going to be resolved?
13:01:17, 23 Feb.
(11040.180000) CWMP: Set Parameter by TR069 Success
13:00:54, 23 Feb.
(11017.080000) CWMP: Set Parameter by TR069 Success
13:00:52, 23 Feb.
(11015.380000) CWMP: Set Parameter by TR069 Success
13:00:18, 23 Feb.
(10981.150000) CWMP: Set Parameter by TR069 Success
12:31:18, 23 Feb.
( 9240.780000) CWMP: Set Parameter by TR069 Success
12:30:55, 23 Feb.
( 9218.450000) CWMP: Set Parameter by TR069 Success
12:30:54, 23 Feb.
( 9216.800000) CWMP: Set Parameter by TR069 Success
12:30:18, 23 Feb.
( 9180.910000) CWMP: Set Parameter by TR069 Success
12:01:17, 23 Feb.
( 7440.580000) CWMP: Set Parameter by TR069 Success
12:00:51, 23 Feb.
( 7414.500000) CWMP: Set Parameter by TR069 Success
12:00:50, 23 Feb.
( 7412.800000) CWMP: Set Parameter by TR069 Success
12:00:16, 23 Feb.
( 7379.140000) CWMP: Set Parameter by TR069 Success
11:31:22, 23 Feb.
( 5645.550000) CWMP: Set Parameter by TR069 Success
11:30:58, 23 Feb.
( 5621.120000) CWMP: Set Parameter by TR069 Success
11:30:56, 23 Feb.
( 5619.420000) CWMP: Set Parameter by TR069 Success
11:30:21, 23 Feb.
( 5583.920000) CWMP: Set Parameter by TR069 Success
11:01:24, 23 Feb.
( 3847.470000) CWMP: Set Parameter by TR069 Success
11:00:58, 23 Feb.
( 3821.010000) CWMP: Set Parameter by TR069 Success
11:00:56, 23 Feb.
( 3819.030000) CWMP: Set Parameter by TR069 Success
11:00:20, 23 Feb.
( 3783.680000) CWMP: Set Parameter by TR069 Success
10:31:22, 23 Feb.
( 2045.280000) CWMP: Set Parameter by TR069 Success
10:30:56, 23 Feb.
( 2018.850000) CWMP: Set Parameter by TR069 Success
10:30:54, 23 Feb.
( 2017.220000) CWMP: Set Parameter by TR069 Success
10:30:18, 23 Feb.
( 1981.620000) CWMP: Set Parameter by TR069 Success
10:01:25, 23 Feb.
( 247.920000) CWMP: Set Parameter by TR069 Success
10:01:10, 23 Feb.
( 232.920000) CWMP: session completed successfully
10:01:09, 23 Feb.
( 232.220000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
10:01:07, 23 Feb.
( 229.980000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
10:01:07, 23 Feb.
( 229.970000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
10:01:06, 23 Feb.
( 229.610000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
10:01:03, 23 Feb.
( 226.330000) CWMP: Set Parameter by TR069 Success
10:01:00, 23 Feb.
( 223.290000) CWMP: Set Parameter by TR069 Success
10:00:48, 23 Feb.
( 210.900000) CWMP: session completed successfully
10:00:21, 23 Feb.
( 184.190000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
10:00:16, 23 Feb.
( 179.460000) CWMP: Set Parameter by TR069 Success
10:59:46, 23 Feb.
( 165.350000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
10:59:46, 23 Feb.
( 165.350000) CWMP: Session start now. Event code(s): '1 BOOT,4 VALUE CHANGE'
10:58:26, 23 Feb.
( 85.260000) CWMP: session closed due to error: No response
10:58:26, 23 Feb.
( 85.240000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
10:58:26, 23 Feb.
( 85.230000) CWMP: Session start now. Event code(s): '1 BOOT,4 VALUE CHANGE'
10:57:56, 23 Feb.
( 54.980000) CWMP: session closed due to error: No response
10:57:47, 23 Feb.
( 46.000000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
10:57:47, 23 Feb.
( 45.990000) CWMP: Session start now. Event code(s): '1 BOOT,4 VALUE CHANGE'
10:57:46, 23 Feb.
( 45.430000) CWMP: Initializing transaction for event code 1 BOOT
09:56:02, 23 Feb.
( 9217.640000) CWMP: Set Parameter by TR069 Success
09:55:59, 23 Feb.
( 9214.790000) CWMP: Set Parameter by TR069 Success
09:55:22, 23 Feb.
( 9178.320000) CWMP: Set Parameter by TR069 Success
09:26:25, 23 Feb.
( 7440.870000) CWMP: Set Parameter by TR069 Success
09:26:00, 23 Feb.
( 7416.160000) CWMP: Set Parameter by TR069 Success
09:25:58, 23 Feb.
( 7413.890000) CWMP: Set Parameter by TR069 Success
09:25:20, 23 Feb.
( 7375.820000) CWMP: Set Parameter by TR069 Success
08:56:31, 23 Feb.
( 5646.980000) CWMP: Set Parameter by TR069 Success
08:56:04, 23 Feb.
( 5619.900000) CWMP: Set Parameter by TR069 Success
08:56:02, 23 Feb.
( 5618.230000) CWMP: Set Parameter by TR069 Success
08:55:26, 23 Feb.
( 5582.370000) CWMP: Set Parameter by TR069 Success
07:56:22, 23 Feb.
( 2037.940000) CWMP: Set Parameter by TR069 Success
07:55:58, 23 Feb.
( 2013.800000) CWMP: Set Parameter by TR069 Success
07:55:56, 23 Feb.
( 2012.090000) CWMP: Set Parameter by TR069 Success
07:55:21, 23 Feb.
( 1976.720000) CWMP: Set Parameter by TR069 Success
07:37:42, 23 Feb.
( 918.010000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'

The remote mnagement changes have been going on since early Feb and just result in multiple reboots. They are not helping
Here is the helpdesk log:
1. Product name:
BT Home Hub
2. Serial number:
+068543+NQ43455196
3. Firmware version:
Software version 4.7.5.1.83.8.204 (Type A) Last updated 21/01/15
4. Board version:
BT Hub 5A
5. DSL uptime:
0 days, 00:04:28
6. Data rate:
8492 / 39997
7. Maximum data rate:
18250 / 80217
8. Noise margin:
12.4 / 12.3
9. Line attenuation:
24.8 / 18.8
10. Signal attenuation:
24.8 / 18.7
11. Data sent/received:
1.5 MB / 2.2 MB
12. Broadband username:
[email protected]
13. BT Wi-fi:
Yes
14. 2.4 GHz Wireless network/SSID:
BTHub5-K7FS
15. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4 GHz Wireless security:
WPA2
17. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID:
BTHub5-K7FS
19. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s))
20. 5 GHz Wireless security:
WPA2
21. 5 GHz Wireless channel:
Automatic (Smart Wireless)
22. Firewall:
Default
23. MAC Address:
c8:91:f9:65:52:b6
24. Modulation:
G.993.2 Annex B
25. Software variant:
AA
26. Boot loader:
1.0.0

Still no fix for Chapter Markers exporting in H.264 Blu-ray for Encore import Error

Why didn't this fix take place in the recent PPRO 2014.2 update?
I still get the error in Encore that I can import the movie file due to chapter markers.
Does this mean we cant any more use Encore for authoring DVDs or Blurays?
Really don't like the Delete the chapter reference file to do this.

The bug appears fixed to me.
First, I updated only AME to 2014.2. I exported directly from PR 2014.1, and, as expected, the xmpses file is malformed and import to Encore fails. Export using the queue (and therefore clearly AME), the export shows a corrected xmpses file, and import to Encore works.
Then I updated PR to 2014.2. Now, direct export from PR also works.
I did not test updating PR and not AME, and that might present a different result.
What are your versions of PR and AME?
Edit: couldn't resist. Rolled back AME to 2014.1 with PR still updated to 2014.2. Direct Export from PR works.

Rings only once - still no fix for this flaw?

Any help here appreciated. I also have the problem where my 8310 rings only once after vibrating. In fact it goes back to vibrating after ringing the one time.
The suggestion to contact the carrier and lengthen the amount of time before sending to voicemail doesn't fix the problem, or even make an acceptable work-around in my opinion, because:
- It does no change the problem because it has nothing to do with the problem (the problem is with the phone)
- Even if it did work, it would inconvenience the caller to have to wait so long for me to either pick up or go to voicemail
- It worked fine on the Pearl, which had a 15-second time
The problem is that it goes:
vibrate - vibrate - vibrate - ring - vibrate - vibrate [off to voicemail]
15 seconds are enough time to what is normal and correct, but not happening for me:
vibrate - vibrate - vibrate - ring - ring - ring [off to voicemail]
If the waiting time is increased to 30 seconds, there is just more of the same problem:
vibrate - vibrate - vibrate - ring - vibrate - vibrate - vibrate - ring - vibrate [30 seconds up, off to voicemail]
Please tell me there is a solution to this apparent flaw. I would have gotten a proper phone if I had known there would be this hassle by getting a new BB. I feel like sending a bill to RIM for all my wasted time on this matter.
What I don't get is that this apparent bug has been around for a long time, yet my Curve bought last week still has it, and I have not found a proper solution to the problem yet. Either I am missing something or does BB not come out with patches for bugs / design flaws?

OK, here's what makes no sense - my coworker has a 8310 just like mine, but his works fine - it vibrates first, then it rings multiple times as it should. With the exact same settings in 'profiles', mine rings only once.

Still no fix for two annoying Lightroom 5 bugs

I'm very disappointed that Adobe still hasn't fixed two of the most annoying bugs in Lightroom 5. The first is the issue with full screen mode. Unpredictably, the screen will occasionally become trapped in full screen. The only way I know to escape is to quit the software, restart and hit Shift F. The second, even more annoying issue is that, when moving from image to image or going to Loupe view, images will often open blurred. This can usually be fixed by moving back and forth between images.
I have these bugs on a Macbook Pro Retina and an iMac running Maverick and on a Mac Pro running Lion. They occur with Nikon and Fuji JPEGs and RAW files.

I'm encountering the very same issues on Windows 7 x64 with Canon and Sony RAW files. So it looks like a general LR problem.
I have a second monitor plugged to my notebook and when the screen turns off after the inactivity period, the secondary LR screen is moved to the primary monitor with no possibility to move it back, even if the second monitor is turned back on.

Still no fixes for Audigy 2zs problem

I still have major issues with my Audigy 2zs in many games, yet I still see absolutely no updates on the drivers. Have you completely abandoned you customers now?
If I install your bloatware to get the functionality, I get crash after crash, yet if I just use the driver, I get only 4 hardware voices, and many sounds are simply dropped. This is in World of Warcraft, Doom 3, Unreal 2, Unreal Tournament 2003, Diablo 2, and even games as simple as Bejeweled 2!
As long as you continue to leave your old bugs in place, I will not support buying any of your new products. I will continue to tell people that your products are crap because you refuse to actually support them. If Nvidia or ATI had pulled this ind of crap with their products, they would have gone under by now. We've already seen this happen with 3dFX and S3. Don't you people learn from history?

I just recently found out about the VIA and Creative problems in the past. I know the SiS chipset is good too! I had this 2zs card in an Asus SiS chipset motherboard and it worked flawlessly. Now, in this VIA chipset motherboard, I'm having all kinds of trouble. I can't justify buying a new motherboard when I only bought this motherboard 2-4 months ago! I wish I knew of these issues before buying a motherboard with a VIA chipset!!
Does anyone know of a solution or know if Creative is even working on a solution? That Beta driver's been out for more than a month now! I hope when the final revision of that driver comes out, it will address this issue! If not, I don't know what I'm going to do!!
And with all the problems I've seen people having with the X-fi cards, I'm not even going to consider going in that direction (especially since a lot of people having trouble with the X-fi card have motherboards with the VIA chipsets).
Any help is greatly appreciated! I've spent countless hours searching the web for an answer (which is something I shouldn't have to do in the first place, but that's another story) and have come up with nothing! The ONLY reason why I'm sticking with this Creative card is because I really like EAX in my PC games, and especially EAX Advanced HD 4.0! When functioning properly (which is not as often as I'd like), it sounds amazing!!

IOS 4.2 Still NO Fix for USB Car Audio (AVN726E)

With the Release of iOS 4.2.1; I rushed to update hoping that it would fix my USB to Car Audio, but it doesnt, what exactly is Apple trying to accomplish by removing functionality..
I own an Eclipse AVN726E which I've come to learn is also the system that Toyota/Lexus uses in some of their vehicles..
Granted I can play audio through the Bluetooth Audio selection but then the devices doesnt charge..
I plug in my iPhone 4 and it just hangs on "Reading..."
Does anyone have any ideas or anything that I can try to make this work..
Or is this all in the hands of Apple..

I've got a Kenwood KDC-MP345U and had the "Reading" hang problem after doing the 4.2.1 update. This worked for me...
I simply did a full restore using the Restore button in iTunes. It will ask you if you want to back up your phone first -- cancel out and do it! Then hit the Restore button again. This will restore the iPhone to factory settings. The phone then will update itself to the latest operating system (4.2.1). Finally, restore your own settings from your last backup. When I plugged in the phone into the MP3U, I got the "Reading" message for about 2 seconds and then everything went back to normal. Also, all my settings on the phone are exactly as before -- don't skip the backup immediately before the Restore.
Hope this helps someone else...

Still no fix for aspect ratio problems

I was hoping this new version would fix the aspect ratio problems with importing clips other than in the DV codec, but alas, it was not to be.
My problem is that if I import a clip that is 720x486 (non-square pixels, uncompressed), iDVD doesn't interpret it correctly. It places the clip with small black bars (like a little letterbox) at the top and bottom of the screen, then scrunches the image vertically, sprinkling it with stairstep artifacts.
What's frustrating is that versions up to iDVD 4 didn't have this problem and imported clips in any codec beautifully. It's been a known issue for a long time.
Furthermore, Apple's solution is to convert the clip to a self-contained DV movie (hello, disk space!), which is also undesirable because of the quality loss and poor colour compression. After the latest QuickTime upgrade, exporting in DV doesn't work, creating a clip that is half-field and blocky.
Argh! This is a real problem because many of us use iDVD to make screeners for clients, and it looks unprofessional. It's also a very inaccurate and somewhat useless tool when the clips are of clean lines, titles, and smooth, solid graphics, which show the stairstep effect the most.
I'm at my wit's end having exhausted all other suggested solutions (and please don't tell me to use DVD Studio Pro instead). Anyone else come up with a fix or have the same issue?
Previous discussion on this issue here: http://discussions.apple.com/thread.jspa?threadID=204675&tstart=0

Sorry, but the answer is - for professional use, use
DVD SP
No, it is absolutely not the answer. EVERYONE I know in my circle of professionals uses iDVD for banging-out quick screeners of TV spots, film clips, dailies. In fact, it's one of the main reasons they added OneStep to iDVD. DVD Studio Pro is for authoring commercial-level DVDs, with a learning curve and pricing structure appropriate to that.
I'm not going to spend time learning DVD Studio Pro just to do quick one-offs, for one, and it's overkill anyway. Not only that, but it costs a lot more than iDVD.
The inablity to import a QuickTime clip -- on Apple software, no less -- is not cool, especially since it doesn't seem an excessive thing to ask (and it used to encode just fine). It's a very basic task considering everything else iDVD has been written to do, and crosscoding and re-encoding video is a basic functionality in QuickTime.
I'm not asking iDVD to prove the existence of dark matter in the universe; I'm just asking it to play a QuickTime movie properly. Which is what it's supposed to do.
There was a work-around, supplied by Apple, but it no longer works for me, so that's why I'm asking what worked for others.

Still no fix for macbook pro over-saturated second monitor problem

Yup, 2 updates and the problem continues...come on apple sort it out.
Please see this link
http://forums.dpreview.com/forums/readflat.asp?forum=1017&thread=27372922
Mike

solved i think...
this from Kimomik on the flickr forums
Solved!
I had the same issue: Aperture 2.1, MBP and external display, color shifting in full screen mode.
Searching on the net, I found the following article on apple web site and applied its fix even if the article is dated from June 2006... It worked for me!
# Open the Color Sync utility, located at /Applications/Utilities.
# Click the Devices icon.
# Click the disclosure triangle next to Displays.
# Select your second display.
# Click the Make Default button.
Here is the article: docs.info.apple.com/article.html?artnum=303891
I hope it will work for you too.

IOS5.0.1 still no fix for podcasts

Similar Messages

Maybe you are looking for