IOs6 caused error and froze my phone

After the error occured, my phone was stuck on the apple logo with the loading bar below it. I cannot restart it because my power button is broken, and the phone will not be recognized on my iTunes. Any help how i can get my phone off or back to working again?! HELP PLEASE!!!

I had this same problem last night.  This morning I was searching solutions on-line.  I uninstalled and reinstalled iTunes and everything else listed.  One person noted the port the phone was plugged into didn't work.  After I simply plugged into a different USB port all was well...

Similar Messages

  • I tried updating to the IOS6, there was an error, and now my phone is in recovery mode and i need to restore to factory settings.  Is there anything I can do?

    I tried updating to the IOS6, there was an error, and now my phone is in recovery mode and i need to restore to factory settings.  Is there anything I can do?

    You have to restore your iPhone. Same thing happened to me and many others. Sorry man.

  • I attempted to update my iphone5 to 7.1.1  There was an error and now my phone is erased.  I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud

    I attempted to update my iphone5 to 7.1.1  There was an error and now my phone is erased.  I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Also, do you remember what the error message said?

  • Reports Background Engine caused error and had to be closed

    "Reports Background Engine caused error and had to be closed"
    we are encountering this error when trying to run any report on some machines.with windows 2000.
    we tried to login (on the machines having problems) using another windows user,
    sometimes it works and sometimes not.
    we also tried to reinstall the reports runtime and it never worked.
    we have developer 6i, Oracle database 10g express edition.
    Does anyone have a solution to this random problem ?
    Thanks

    dear all
    you can pass parameter from form to report to close report server after close report
    add_parameter(pl_id, 'oracle_shutdown',text_parameter, 'Yes');
    then it will be ok
    good luck
    Message was edited by:
    nim
    Message was edited by:
    nim

  • While i was updating my ipod touch it had an error and froze at the apple logo with a loading bar underneath.How do I fix it? Its stuck there,  tried everything, turn off button home screen button even the volume buttons, nothing is working.

    I was updating my ipod touch and the updation had an error and it froze at the apple logo with the loading bar underneath. How do I fix it? I tried the turn off button home screen button and even the volume buttons. I cant get anything to work. Please help me.

    Connect to itunes and retore.

  • HT4061 I tried to update my itunes and phone and it said "error" and now my phone only shows the charger and and itunes icon

    I was trying to update my iphone 4s and it came up an error.  Now my phone only shows a charger and the itunes app.

    You might need to do a few times
    http://support.apple.com/kb/HT1808

  • HT4061 i tried to updated my iphone through my computer there was an error and then my phone became frozen on the conect to iphone screen and now itunes dose not recongize the phone

    I tried to update my iphone through my itunes and recieved an error message.  The phone then became frozen on the conect to itunes screen and I can not use the phone.  I tried to reconect to itunes but it does not recoginze my phone it just stays frozen.

    Try recovery mode as described here.  You may have to try to get into recovery mode more than once to succeed.
    http://support.apple.com/kb/HT1808

  • I plugged my I phone in to my computer last night, it asked me if I wanted to download new itunes applications, there was an error and now my phone is locked with the itunes logo and the plug shown on the screen

    my phone is locked, I tried to hard boot, nothing is working. I have the i tunes logo on the screen with the plug showing, but I can not get away from the screen, what do I do?

    Same thing happened to me last week had to update than said some sort of error so it told me to restore I did that and it said restore couldnt be completed !! So I called my service provider and I had to press the circle button and the power button and hold for 15 seconds while still plugged in to the comp , than to try and restore and than update !! And it worked !! Hope that helps!!

  • Dashboard Widget causes error and I can't get dashboard to stay open - how do I find the file to delete?

    I put "levelwidget" on the dashboard - it is supposed to make a macbook into a Level.  Sounded interesting...now I regret!
    The widget is corrupted and now when I try to open the dashboard it immediately closes and gives me an error message "you can't open the application motion because power pc applications are no longer supported"
    How do I delete this widget so I can open the dashboard.
    I've tried to look up the file, but can't seem to find dashboard widget files. 
    Thoughts?
    Grant

    Sorry didn't realise you were an Apple Newbie!
    No problem, when you're in the Finder, check along the menus at the top of the screen.
    You should see Finder (in Bold) File, Edit, View, Go, Window and Help. Click the Go menu and with the mouse go to the second to last item which is 'Go to Folder…' then you be presented with a dialogue box ready to type some text into.
    Now you can type the text ~/Library/Widgets into the box. The Tilde character is next to the left Shift key (Press and hold the Shift key and then press the ~ key.
    It will be easier if whilst you're reading this message, you highlight the text ~/Library/Widgets and go to the Edit menu, select Copy, then go to the Finder and when you've the Go to Folder… dialogue window open, go Edit Paste and it will fill the box for you. Then just click the Go button and it should show your Widgets. Again if not the one just repeat the Go to Folder… bit and this time just remove the ~ at the beginning of the line
    Mike

  • Unable to unlock tag; causes error and crash!

    I am running InDesign CS3 and newly installed OSX 10.6.4 on a GS5 Quad-Core Intel.
    I'm having difficulties with a multipage file that I created and tagged. It has produced an error message during packaging. And if I continue to package the file for print (which it will let me do) and then try to open the newly packaged file, InDesign crashes with the following message:
    "Cannot modify elements that contain locked content, or are contained by  locked content. Please unlock or check out the content and try again."
    Here's the curious part:  I happened to notice that one of the tags in the "Structure" panel seems to point to content in my document that does not really exist. In other words, I double click on the tag and a box is highlighted in the actual document; yet, the box does not highlight with either selection tool, directly. Additionally,  there is no indication that the "content" there is locked, so I'm not given the option to unlock either the content or the mysterious tag, which I would like to delete.
    I've never had a problem like this until recently, which leads me to suspect that my new operating system is not speaking to the CS3 version of InDesign!
    Has anyone encountered this before?
    Is there a work around? Or, am I doomed to scrap my very complex and otherwise completed document and rebuild the whole thing????
    Any insights on this would be greatly appreciated!

    I was not able to unlock or delete the errant tag; however, saving an .Inx version seemed to eliminate the problem of crashing and the error disappeared. Good enough for my purposes!
    Now, I can proceed with my print deadline.
    Thanks a lot!

  • Changes to filter list allowed senders causes errors and emails to stop

    Hi,
    Running Forefront 2010 and Exchange 2007
    When I change filter settings including allowed sender list and then press save my email system crashes and I see numerous errors in the event log such as:
    7011 - none of the antimalware engines selected for real time scanning have been initialized
    5314 - could not initialize spyware scanner
    I can eventually force it back into life by restarting the Forefront Server Protection Service (that includes MS Exchange Info store and transport services) - actually a restart fails and they all need a manual restart.
    Is this a "feature" or am I doing something wrong?
    Thanks,
    Julian

    Hi,
    are you running the latest build of FPE?
    Here is the link for rollup 4:
    http://support.microsoft.com/kb/2619883/en-us
    And a critical hotfix for rollup 4:
    http://www.microsoft.com/en-us/download/confirmation.aspx?id=41836
    Greetings
    Christian
    Christian Groebner MVP Forefront

  • Readreg.exe has caused errors and must be restar

    has anyone seen this message before?everything works fine but i get this stupid error message every time i start my computer. i tried reinstalling. same problem. i contacted tech support and their suggestions were no help, in fact i don't think?they had?anything to do with my problem. i told them what was happening and here is what they said...
    Dear Customer,
    ???Thanks for contacting Creative Technical Support. I
    understand you are having trouble getting a registration message from
    displaying. Please follow the instructions in the attached articles and
    see if this resolves the problem. they didnt.
    i am not getting a registration message i am getting an error message. anyone understand what they mean by...
    ?"having trouble getting a registration message from displaying"?
    im confused please help?

    bump?someone please help

  • Tried to load ios6 through itunes and it failed

    docked and backed up iphone 4s to windows 7 pc running 10.7 itunes
    selected install update in itunes
    It ended with an unkown error dialog box that said you must restore your iphone to connect it to itunes
    the restore fails with an unknown error and now the phone just has the connect to itunes display.

    Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Automatically start Firefox in a private browsing session"
    It usually works better if you export the Favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
    * Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export
    * Import the HTML file in Firefox: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
    See also http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

  • TS3694 I received an error while updating my phone to ios6. Now it's frozen and I can't power down or reconnect it to show in iTunes. What do I do?

    I received an error while updating my phone to ios6. Now it's frozen and I can't power down or reconnect it to show in iTunes. What do I do?

    You can try contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Hi, I installed iOS6 beta without registering it to the developer program. Now on iTunes and on my phone I get the same "We're unable to complete your activation" error. What do I do?

    Hi, I installed iOS6 beta without registering it to the developer program. Now on iTunes and on my phone I get the same "We're unable to complete your activation" error. What do I do?

    You have to restore your phone. To do this turn off your phone and disconnect it from your pc or mac. You then have to plug in the usb part of your sychronize cable into your pc or mac. Open itunes. Now press and hold on the home button on your iphone and plug the cable into it while still holding down the home button. Your iphone will now be in recovery mode and on itunes you will see the option that says restore. Click on that and your phone will be restored to factory settings. If you backed up your itunes all your apps will be downloaded back on to your phone. Including all your contacts and text messages. It took me a couple of tries to restore my phone when this happened so if it doesnt work the first time do it again. Took me two tries. This video will help you out. http://www.youtube.com/watch?v=Jzyy4puapig

Maybe you are looking for

  • Z ORDER OF OBJECTS

    Hi, I am creating a portfolio where all of my images are being loaded from an xml doc. The thumbail loader is being loaded into level0, my problem is that all of the images are being loaded over my UI assets that are already on stage. Flash is not re

  • How I can highlight, copy and paste using magic mouse?

    I'm wondering how I can use Magic Mouse to highlight, copy and paste documents. I look at directions in manual and preferences, but could not find the answer.

  • Transparent Tables Error

    Dear all experts, I have created two trans. table. 1. ZSD_CC 2. ZSD_CC_DEPT. Now while declaring this tables in my TOP include with TABLES: statement ZSD_CC_DEPT is not showing any error. but while declaring ZSD_CC table system shows me some error ""

  • Inner join command is not supporting pooled table

    Hi Forum, I'm new to abap. I tried passing fields of two tables into a single table using inner join command. But one of the tables is a pooled table so the command "inner join" is not supporting that. How to pass the fields in those two tables into

  • Java random

    Hi! import java.util.*; Random myRand = new Random(); n[i] = myRand.nextInt(30);If I want to print out numbers between 15 and 30 How do I write it with help of java util.? Can I write Random nbrs in another way?