IOS6 iPhone Keynote Audio not functioning

I am attempting to view a Keynote presentation on my iPhone. It has embedded audio. The presentation is created in PowerPoint 2010. I have uploaded it to the Cloud and emailed it to myself. Then opened it on my iPhone.
Neither produced the sound. It does state that Movies are not supported and were removed.
I have also attempted to create a new Keynote presentation on my iPhone. It also does not allow me to add in audio.
Is audio not a supported function for Keynote on an iPhone?
Is it supported on iPad?
Many thanks
Kim

Jimmie,
Try doing a SMC reset and if that doesn't do it then do a PRAM reset. Finally if you still don't have luck with those two restart in Safe Mode.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Similar Messages

HT1665 Bluetooth on my IPhone 3GS seems not function properly

Bluetooth on my IPhone 3GS seems not function properly. How to check and rectify it.

It would help if you explained what you mean when you say it doesn't function properly. What are you attempting to do? What happens when you try? What troubleshooting steps have you already taken?

HT201412 my lower right screen of iphone 4 is not functioning proper . I have to press hard to make it go. and my letter "o" it not functions while typin a message. please help

My lower right screen touch
of iphone 4 is not functioning proper . I have to press hard to make it go. and my letter "o" it not functions while typin a message. please help

There is a possibility that your digitizer has malfunctioned. I had a similar problem on my iphone 3gs whereas the lower left part of my screen didnt respond to touch at all. Take your phone to an Apple store and have them fix it for you. I fixed my iphone 3gs' digitizer by replacing it myself because my phone was out of warranty, and there arent any Apple stores nearby. But you should definitely take your phone to Apple store and let them fix it for you, because in order to replace digitizer on iphone 4, you really need to be skillful when it comes to phone repairs,and attemting any repairs yourself voids your warranty. Hope I helped. Cheers mate

IPhone 6 audio not working

MY iPhone 6 audio is only working when the ear phones are connected.

Hi bigTom4,
I'm sorry to hear you are having these issues with your iPhone. If you continue to have audio issues when connecting to your BMW's stereo via Bluetooth or USB, you may find the troubleshooting steps outlined in the following article helpful (apologies if you have already seen it):
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
Regards,
- Brenden

Audio NOT functioning correctly after botched bluetooth headset pair attemp

After trying to connect my bluetooth headset (Motorola HS820) to my Macbook Pro i am having issues with several apps including firefox and mediacentral. Audio from these programs will not play. I get an error message saying there was a problem with my bluetooth audio configuration.. However apps like itunes and skype function correctly..
When attempting to pair my bluetooth headset the bluetooth assistant pairs it succesfully but when it connects it immediately disconnects.. after several attempts at tricking it to connect (advice from posts in mac.com forums) i have given up and deleted these devices from my bluetooth preferences and still have these problems..
I'm assuming there is some config file still in place pointing these apps in the wrong direction?
Macbook Pro Mac OS X (10.4.6) Dual Booter

Just verified Audio is not working for me in safari either...
Example i'm using is any video on youtube.com
Edit: I guess this would be a problem with macromedia flash then?

IPhone freeze/iTunes not functioning correctly

Long time lurker, first time poster.
Last night I was updating apps on the 3G when it suddenly froze. I was able to turn it off and then turn back on.
I got the symbol to plug the phone into iTunes, so I did that and it said I needed download the latest software update and that I was in recovery mode. The update is like 280MB and I'll make it to 200 or so before I get an error message (1119 is the error # I believe).
I rebooted my computer and tried to turn off/on the phone again but I get the plug to iTunes message again.
Not sure where the problem is lying exactly right now. Can't use the phone at all.
Any suggestions? Thanks in advance.

Thanks. Before I saw your reply, I shut down my iPhone fully, restarted it (I had to reset the defaults) and reconnected. The problem did not reoccur. It also seemed to correct a problem I was having the "weather" function on my iPhone. Thanks again.

My playlists in iOS6/iPhone 5 is not updated

iTunes Match ***** sometimes.
I added some songs into my playlist from my Mac mini. Immediately, songs/playlists were synced in the other computer (iMac). HOWEVER, nothing was updated in my iOS devices (with iOS6)!!!!!! Both my iPhone and iPad are still ruuning old playlists!!!!!!
Someone please help me!

There is no way for us to know, and Apple would not support any problems you developed from doing that. I would advise against it. Your iPhone may no longer work.

[SOLVED] HDMI audio not functioning

I'm having trouble getting audio working. My setup is audio through HDMI, but I actually don't have a way to test audio through any other means, so I'm not sure if HDMI has anything to do with the problem.
My onboard video chipset is ATI Radeon HD 4250, and so I have added "radeon.audio=1" to my GRUB's boot entry, however nothing seemed to change. Where I seem to be stuck is that aplay will not pick up any sound devices:
$ aplay -l
aplay: device_list:252: no soundcards found...
From http://lkubuntu.wordpress.com/2011/07/2 … eshooting/ I was able to yield the following:
$ lspci -nn | grep '04[80][13]'
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
01:05.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f]
From some commands in the ALSA page at the wiki:
$ lsmod | grep '^snd' | column -t
$
$ ls -l /dev/snd
ls: cannot access /dev/snd: No such file or directory
No idea why almost all of the commands I'm seeing are returning the opposite of what they should. Any ideas?
Last edited by skoh-fley (2012-03-10 19:05:13)

Thanks for your replies guys! Using both of your posts' information I was able to get HDMI audio working. Here's what I did:
# modprobe -v snd-hda-intel
FATAL: Module snd-hda-intel not found.
At this point I found a post that suggested reinstalling kernel26:
# pacman -S kernel26
warning: linux-3.2.9-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): linux-3.2.9-1
Total Installed Size: 57.45 MiB
Net Upgrade Size: 0.00 MiB
And after that all the commands starting working:
# modprobe -v snd-hda-intel
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/soundcore.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-timer.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-page-alloc.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-pcm.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-hwdep.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/pci/hda/snd-hda-codec.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/pci/hda/snd-hda-intel.ko.gz
# cat /proc/asound/{cards,devices}
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfeb00000 irq 16
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfe710000 irq 19
2: [ 0- 2]: digital audio capture
3: [ 0- 1]: digital audio playback
4: [ 0- 0]: digital audio playback
5: [ 0- 0]: digital audio capture
6: [ 0- 0]: hardware dependent
7: [ 0] : control
8: [ 1- 3]: digital audio playback
9: [ 1- 0]: hardware dependent
10: [ 1] : control
33: : timer
Using this information I just followed OrionFyre's instructions and the sound works perfectly! Thanks all!

IPhone wi-fi not functioning

I have an iPhone 3G that stopped locating wireless access points. And so we don't go to the iPhone 101 discussion, yes, Wi-Fi is enabled. It just won't pick up any signals. How can I tell if there is some type of hardware problem? The phone works fine for calls, texts, over 3G, and nothing else seems to be affected.
Assistance appreciated!

If no change after any of the standard troubleshooting steps which in order are reset network settings on your iPhone, power the iPhone off and on, an iPhone reset, restoring the iPhone with iTunes from your iPhone's backup, and restoring with iTunes as a new iPhone or not from your iPhone's backup, more than likely your iPhone has a hardware problem or failure - especially if no change after restoring with iTunes as a new iPhone or not from your iPhone's backup.

Powerbook Audio not functioning

My Powerbook G4 17" is having an issue where when I push any of the sound buttons (mute sound, volume down, volume up) I get a grayed out speaker icon and under it, it appears as if the audio is turned all the way up, but underneath that is a "cancelled" icon, very much like the Ghostbusters logo. I have no audio on the powerbook at all.
I've tried a few solutions. I've checked my Midi to see if it was at 44.1 and both input and output are set to 44.1. I've reset the PRAM. The speakers and audio are working, because when I restart the powerbook, the audio startup tone comes on. Once I'm into the OS, I'm having this problem of no audio and the "audio cancelled" icon. Anyone have any thoughts? Thanks.

Trying zapping the PRAM again I had just this problem after a system software upgrade and that did the trick!
Matthew

Satellite "Audio" not functioning

I have a Satellite laptop that I got in 2000 which I've use on and off since then. Recently the audio seems to have stopped working. Every time I try to play a CD or watch a movie, which was no problem before, I get a message that says there is "a problem with your sound device."
After following some links I got to something that said there was a problem with the "drivers" which sounds to me like a mechanical issue.
What is the next step that I should take to fix the problem?
Thanks.

Which Satellite?
-Jerry

Can I record audio notes from iphone to cd

Can I record audio notes to cd from my iPhone?

Not direct from the iPhone, but audio notes can be synced with iTunes on your computer. You can burn your iPhone audio notes to a CD from your iTunes library on your computer as with any other music files in your iTunes library.

IPhone 5c cameras not working

both of my cameras on my pone arnt working and its just shopping a black screen

Hey g7012,
I'm sorry to hear you are having an issue with your iPhone's cameras not functioning as expected. I would suggest that you troubleshoot using the steps in this article -
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Touch screen will not function on email

Hi, the touch screen on my Iphone 4 will not function when I open email. It seems to work with all other apps/areas on the phone. In addition, I cannot power off as the power off button does nothing, nor can I do a hard reset. Has anyone else had this problem or know what I can do to fix this? Thank you!

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
http://support.apple.com/kb/TS5356
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
 Cheers, Tom

Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

IOS6 iPhone Keynote Audio not functioning

Similar Messages

Maybe you are looking for