Ios6 unexpected auto reboot?Safari typing error?

So I was texting with my friend today, when I sent a message to "A"friend, I then received message from "B"friend, and it appeared on top of the screen, so I touched the roll, it normally should take me to the message sent from "B". Instead the whole screen goes black and a white apple logo appears. And this have happened to me several times since I updated to ios 6.
The second problem is that when I go in safari, using google search, I cannot change the key word I searched. For example, I searched "red apple", then I want to search "green apple", it does not allow me to edit my writing, instead I have to delete the whole line in order to change the first word, so when the key word is very long, and I want to change something, I have to retype the whole thing!!
Anyone have the same problem? Hope apple can fix it.

Never jail broke, I tried hard rest, reinstall software, erase iPhone, set up as new iPhone. None worked

Similar Messages

Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

Hello.
I have a problem with OEL 6.5 and ocfs2.
When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
fstab:
UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
#UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
#UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

What is the output of:
# chkconfig --list o2cb
# chkconfig --list ocfs2
# cat /etc/ocfs2/cluster.conf

HT4623 So I upgraded my 4S phone to IOS6, and when I try to log in to Cloud on the phone, it comes back as wrong password. I tried a dozen times, VERY SLOOOOWLY to make sure I wasn't making some sort of typing error, but noo.

So I upgraded my 4S phone to IOS6, and when I try to log in to Cloud on the phone, it comes back as wrong password. I tried a dozen times, VERY SLOOOOWLY to make sure I wasn't making some sort of typing error, but noo.

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

Keyboard typing errors

My recently purchased HP laptop frequently introduces keyboard typing errors. The cursor will jump to different locations while typing, will introduce unrequested commands, such as erasing, jumping to different pages, etc. I have turned off the fingerpad and the errors continue. Is there a cure?
Pavilion dv7t-6c00 CTO Quad Edition Entertainment Notebook PC
Product Number:
A1L69AV
[Personal Information Removed]

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

No auto-reboot with WSUS

Hi all
We're currently trying to set up a WSUS in our firm, to make updating servers easier and less of a time-wasting work.
The goal would be, for the servers to automatically install the updates and then reboot, so a collegue or me only have to check in the WSUS to see wheter all updates were applied.
Now to the Problem:
Our WSUS is currently up and running and some (not all) servers in the network will, once approved, download and install the updates with the shedule. But they won't neither automatically reboot, nor directly ask me for a reboot after they're done. I either
can wait a long time or go to setting -> windows update and press on restart now.
The log is from the time it started the install, to the last entry it had when I opened it.
The last entry is also what i think is the problem, but I couldn't find a solutions with googling the error, so here I am.
The logs look like this:
2015-04-01 14:00:22:009
892 6d8
AU Request to perform an AU scheduled install
2015-04-01 14:00:22:009
892 6d8
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2015-04-01 14:00:22:009
892 6d8
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-04-01 14:00:22:009
892 6d8
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-04-01 14:00:22:009
892 6d8
AU Update {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}.200 was auto-approved for forced install
2015-04-01 14:00:22:009
892 6d8
AU #############
2015-04-01 14:00:22:009
892 6d8
AU ## START ## AU: Install updates
2015-04-01 14:00:22:009
892 6d8
AU #########
2015-04-01 14:00:22:009
892 6d8
AU # Initiating scheduled install
2015-04-01 14:00:22:009
892 6d8
AU # Approved machine updates for 3DA21691-E39D-4DA6-8A4B-B43877BCB1B7 = 1
2015-04-01 14:00:22:087
892 6d8
AU # Approved updates for 3DA21691-E39D-4DA6-8A4B-B43877BCB1B7 = 1
2015-04-01 14:00:22:087
892 6d8
IdleTmr WU operation (CInstallCall::Init ID 2) started; operation # 271; does not use network; is not at background priority
2015-04-01 14:00:22:087
892 6d8
IdleTmr Incremented idle timer priority operation counter to 2
2015-04-01 14:00:22:118
892 6d8
Agent Beginning install of conventional work item
2015-04-01 14:00:22:118
892 6d8
AU <<## SUBMITTED ## AU: Install updates / installing updates [CallId = {AA61D5E4-0965-4140-B4D0-13B4D219F94F}, ServerId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2015-04-01 14:00:22:118
892 6d8
WuTask WUTaskHandler successfully started the task.
2015-04-01 14:00:22:118
892 87c
Agent *************
2015-04-01 14:00:22:118
892 87c
Agent ** START ** Agent: Installing updates [CallerId = AutomaticUpdates]
2015-04-01 14:00:22:118
892 87c
Agent *********
2015-04-01 14:00:22:118
892 87c
Agent * Updates to install = 1
2015-04-01 14:00:22:118
892 87c
Agent * Title = Update for Windows Server 2012 R2 (KB3048778)
2015-04-01 14:00:22:118
892 87c
Agent * UpdateId = {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}.200
2015-04-01 14:00:22:118
892 87c
Agent * Bundles 1 updates:
2015-04-01 14:00:22:118
892 87c
Agent * {0739A81E-D61F-492B-9450-2AC1707FBCA1}.200
2015-04-01 14:00:22:134
892 87c
DnldMgr Preparing update for install, updateId = {0739A81E-D61F-492B-9450-2AC1707FBCA1}.200.
2015-04-01 14:00:22:134
4288 11c4
Misc =========== Logging initialized (build: 7.9.9600.17489, tz: +0200) ===========
2015-04-01 14:00:22:134
4288 11c4
Misc = Process: C:\Windows\system32\wuauclt.exe
2015-04-01 14:00:22:134
4288 11c4
Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
2015-04-01 14:00:22:134
4288 11c4
Handler :::::::::::::
2015-04-01 14:00:22:134
4288 11c4
Handler :: START :: Handler: CBS Install
2015-04-01 14:00:22:134
4288 11c4
Handler :::::::::
2015-04-01 14:00:22:134
4288 11c4
Handler Starting install of CBS update 0739A81E-D61F-492B-9450-2AC1707FBCA1
2015-04-01 14:00:22:149
4288 11c4
Handler CBS session identity: 30436467_1850714295
2015-04-01 14:00:22:149
4288 11c4
Handler CBS package identity: Package_for_KB3048778~31bf3856ad364e35~amd64~~6.3.2.0
2015-04-01 14:00:22:165
4288 11c4
Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\6809f963a34e237a312a57399ef56e0b\windows8.1-kb3048778-v2-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\6809f963a34e237a312a57399ef56e0b\inst
2015-04-01 14:00:27:134
892 868
Report REPORT EVENT: {B2E6BF0E-B92F-4F51-A7E3-16478F0B5274}
2015-04-01 14:00:22:118+0200 1
181 [AGENT_INSTALLING_STARTED] 101
{F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}
200 0 AutomaticUpdates
Success Content Install
Installation Started: Windows has started installing the following update: Update for Windows Server 2012 R2 (KB3048778)
2015-04-01 14:00:27:134
892 868
Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2015-04-01 14:00:27:134
892 868
Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2015-04-01 14:00:27:134
892 868
Report CWERReporter finished handling 2 events. (00000000)
2015-04-01 14:00:33:399
4288 11c4
Handler Requesting post-reboot reporting for package Package_for_KB3048778~31bf3856ad364e35~amd64~~6.3.2.0.
2015-04-01 14:00:33:399
4288 11c4
Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
2015-04-01 14:00:33:415
4288 11c4
Handler :::::::::
2015-04-01 14:00:33:415
4288 11c4
Handler :: END :: Handler: CBS Install
2015-04-01 14:00:33:415
4288 11c4
Handler :::::::::::::
2015-04-01 14:00:33:415
892 87c
AU Preventing expiration of polled reporting events until next restart
2015-04-01 14:00:33:415
892 9ec
AU >>## RESUMED ## AU: Installing update [UpdateId = {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}, succeeded]
2015-04-01 14:00:33:430
892 87c
Agent *********
2015-04-01 14:00:33:430
892 87c
Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2015-04-01 14:00:33:430
892 9ec
AU Install call completed.
2015-04-01 14:00:33:430
892 87c
Agent *************
2015-04-01 14:00:33:430
892 9ec
AU # WARNING: Install call completed, reboot required = Yes, error = 0x00000000
2015-04-01 14:00:33:430
892 9ec
AU #########
2015-04-01 14:00:33:430
892 9ec
AU ## END ## AU: Installing updates [CallId = {AA61D5E4-0965-4140-B4D0-13B4D219F94F}]
2015-04-01 14:00:33:430
892 87c
IdleTmr WU operation (CInstallCall::Init ID 2, operation # 271) stopped; does not use network; is not at background priority
2015-04-01 14:00:33:430
892 9ec
AU #############
2015-04-01 14:00:33:430
892 87c
IdleTmr Decremented idle timer priority operation counter to 1
2015-04-01 14:00:33:430
892 474
AU Install complete for all calls, reboot needed
2015-04-01 14:00:33:430
892 474
AU CAUInstaller::OnAllCallsComplete | result of install HRESULT hr = 0x00000000
2015-04-01 14:00:33:430
892 474
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-04-01 14:00:33:430
892 474
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-04-01 14:00:34:040
892 474
AU Triggering Offline detection (non-interactive)
2015-04-01 14:00:34:040
892 474
AU Adding timer:
2015-04-01 14:00:34:040
892 474
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-04-01 12:00:34, not idle-only, not network-only
2015-04-01 14:00:34:040
892 474
WuTask ScheduledInstallTaskHandler received AU scheduled install complete event.
2015-04-01 14:00:34:040
892 474
WuTask ScheduledInstallTaskHandler completed with hr = 0x00000000
2015-04-01 14:00:34:040
3528 11ec
CltUI WARNING: GetAutoRebootInXDays: Auto-reboot time not found(hr = 80070002). Nothing to do here
2015-04-01 14:00:34:040
3528 11ec
CltUI WARNING: GetAutoRebootInXDays: Auto-reboot time not found(hr = 80070002). Nothing to do here
2015-04-01 14:00:34:040
892 474
AU Triggering Offline detection (non-interactive)
2015-04-01 14:00:34:040
892 474
WuTask WUTaskManager received event to unregister task.
2015-04-01 14:00:34:040
892 474
AU #############
2015-04-01 14:00:34:040
892 474
AU ## START ## AU: Search for updates
2015-04-01 14:00:34:040
892 474
AU #########
2015-04-01 14:00:34:040
892 474
IdleTmr WU operation (CSearchCall::Init ID 3) started; operation # 440; does not use network; is at background priority
2015-04-01 14:00:34:040
892 474
Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdates Id = 3]
2015-04-01 14:00:34:040
892 474
AU <<## SUBMITTED ## AU: Search for updates [CallId = {86DC1035-A187-4BAA-AE71-C7386D1ECA55} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2015-04-01 14:00:34:040
892 5f4
Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdates Id = 3]
2015-04-01 14:00:34:040
892 5f4
Agent *************
2015-04-01 14:00:34:040
892 5f4
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates Id = 3]
2015-04-01 14:00:34:040
892 5f4
Agent *********
2015-04-01 14:00:34:040
892 5f4
Agent * Online = No; Ignore download priority = No
2015-04-01 14:00:34:040
892 5f4
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-04-01 14:00:34:040
892 5f4
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-04-01 14:00:34:040
892 5f4
Agent * Search Scope = {Machine & All Users}
2015-04-01 14:00:34:040
892 5f4
Agent * Caller SID for Applicability: S-1-5-18
2015-04-01 14:00:38:415
892 868
Report REPORT EVENT: {7E1602B6-2A94-4769-A590-E3DF79B71208}
2015-04-01 14:00:33:415+0200 1
201 [AGENT_INSTALLING_PENDING] 101
{F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}
200 240005
AutomaticUpdates Success
Content Install Installation pending.
2015-04-01 14:00:38:415
892 868
Report REPORT EVENT: {D637482E-0808-42A6-A4E7-797D135E4A40}
2015-04-01 14:00:33:430+0200 1
194 [AU_SCHEDULED_REBOOT_REQUIRED] 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Restart Required: To complete the installation of the following updates, the computer will be restarted within 15 minutes: - Update for Windows Server 2012 R2 (KB3048778)
2015-04-01 14:00:38:415
892 868
Report CWERReporter finished handling 3 events. (00000000)
2015-04-01 14:00:51:977
892 5f4
Agent WARNING: Failed to evaluate Installed rule, updateId = {{A4ECF96E-FE76-4933-B1A9-FAA712DC2A3B}.200}, hr = 80070057
2015-04-01 14:00:51:977
892 5f4
Agent WARNING: Failed to evaluate Installable rule, updateId = {{A4ECF96E-FE76-4933-B1A9-FAA712DC2A3B}.200}, hr = 80070057
2015-04-01 14:00:51:977
892 5f4
Agent WARNING: Failed to evaluate Installed rule, updateId = {{9941EB5F-4953-446D-99A2-C5989C596283}.200}, hr = 80070057
2015-04-01 14:00:51:977
892 5f4
Agent WARNING: Failed to evaluate Installable rule, updateId = {{9941EB5F-4953-446D-99A2-C5989C596283}.200}, hr = 80070057
2015-04-01 14:01:34:179
892 5f4
Agent * Added update {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}.200 to search result
2015-04-01 14:01:34:179
892 5f4
Agent * Found 1 updates and 68 categories in search; evaluated appl. rules of 380 out of 945 deployed entities
2015-04-01 14:01:34:179
892 5f4
Agent *********
2015-04-01 14:01:34:179
892 5f4
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates Id = 3]
2015-04-01 14:01:34:179
892 5f4
Agent *************
2015-04-01 14:01:34:179
892 5f4
IdleTmr WU operation (CSearchCall::Init ID 3, operation # 440) stopped; does not use network; is at background priority
2015-04-01 14:01:34:179
892 9ec
AU >>## RESUMED ## AU: Search for updates [CallId = {86DC1035-A187-4BAA-AE71-C7386D1ECA55} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2015-04-01 14:01:34:179
892 9ec
AU # 1 updates detected
2015-04-01 14:01:34:179
892 9ec
AU #########
2015-04-01 14:01:34:179
892 9ec
AU ## END ## AU: Search for updates [CallId = {86DC1035-A187-4BAA-AE71-C7386D1ECA55} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2015-04-01 14:01:34:179
892 9ec
AU #############
2015-04-01 14:01:34:179
892 9ec
AU All AU searches complete.
2015-04-01 14:01:34:179
892 9ec
AU Adding timer:
2015-04-01 14:01:34:179
892 9ec
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-04-01 12:26:32, not idle-only, not network-only
2015-04-01 14:01:34:194
892 9ec
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-04-01 14:01:34:194
892 9ec
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-04-01 14:01:34:194
3528 11ec
CltUI WARNING: GetAutoRebootInXDays: Auto-reboot time not found(hr = 80070002). Nothing to do here
2015-04-01 14:01:34:194
3528 11ec
CltUI WARNING: GetAutoRebootInXDays: Auto-reboot time not found(hr = 80070002). Nothing to do here
I hope someone can help me with this issue.
Kind Regard dumdidu

Thanks for the reply, but I already proposed this and it isn't really an option. The goal is to get a comlete oversight with WSUS with as less inputs as possible.
But maybe you can riddle me this column from the log:
2015-04-01 17:57:45:862
828 1090
RebootNotify UpdateRebootRequiredNotification, set reboot grace timeout reg value SecurityUpdatesRebootRequiredNotificationTime to 2015-04-03 15:57:45
2015-04-01 17:57:45:862
828 1090
AU Adding timer:
2015-04-01 17:57:45:862
828 1090
AU Timer: 13EB7139-5C9B-4817-98B7-A22174B1AA43, Expires 2015-04-03 15:57:45, not idle-only, not network-only
2015-04-01 17:57:45:877
828 1090
AU AU setting reboot grace timeout to 2015-04-03 15:57:45
Those timers are in the past. How is this even possible?
From what I know they're two hours behind, as you can see in this log:
2015-04-02 10:23:06:960
916 15f4
AU ########### AU: Policy change processed ###########
2015-04-02 10:23:06:960
916 15f4
AU # Policy changed, AU refresh required = No
2015-04-02 10:23:06:960
916 15f4
AU # WSUS server: http://192.168.50.160:80
2015-04-02 10:23:06:960
916 15f4
AU # Detection frequency: 1
2015-04-02 10:23:06:960
916 15f4
AU # Target group: MDU
2015-04-02 10:23:06:960
916 15f4
AU # Approval type: Scheduled (Policy)
2015-04-02 10:23:06:960
916 15f4
AU # Scheduled install day/time: Every day at 13:00
2015-04-02 10:23:06:960
916 15f4
AU # Auto-install minor updates: Yes (User preference)
2015-04-02 10:23:06:960
916 15f4
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-04-02 10:23:06:960
916 15f4
AU AU settings changed through Policy.
2015-04-02 10:23:06:960
916 15f4
AU Setting AU scheduled install time to 2015-04-02 11:00:00

Solaris 10 gen the panic message and let the server auto reboot

My Solaris 10 server would auto reboot at anytime.
I think is ip:tcp_unfuse problem. But I don't know how to fix it.
Anyone know how to fix this problem!!!!!!!
Many Thanks!
The following is error information
# mdb 0
::statusdebugging crash dump vmcore.0 (32-bit) from tophkweb
operating system: 5.10 Generic (i86pc)
panic message:
BAD TRAP: type=e (#pf Page fault) rp=d4a76acc addr=9d occurred in module "ip" due to a NUL
L pointer dereference
dump content: kernel pages only
panic[cpu0]/thread=d4a48c00:
BAD TRAP: type=e (#pf Page fault) rp=d4a76acc addr=9d occurred in module "ip" due to a NUL
L pointer dereference
::msgbuf...........
httpd:
#pf Page fault
Bad kernel fault at addr=0x9d
pid=277, pc=0xfeaa24b7, sp=0xd479f300, eflags=0x10202
cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6d8<xmme,fxsr,pge,mce,pse,de>
cr2: 9d cr3: 1e472000
gs: fea401b0 fs: fea80000 es: d4530160 ds: ffff0160
edi: d4594800 esi: 0 ebp: d4a76b18 esp: d4a76afc
ebx: d479f440 edx: d3e83b40 ecx: 0 eax: a1
trp: e err: 0 eip: feaa24b7 cs: 158
efl: 10202 usp: d479f300 ss: d479f440
d4a76a2c unix:die+a7 (e, d4a76acc, 9d, 0)
d4a76ab8 unix:trap+f56 (d4a76acc, 9d, 0)
d4a76acc unix:cmntrap+83 ()
d4a76b18 ip:tcp_unfuse+2b (d479f440)
d4a76bf4 ip:tcp_rput_data+4a (d479f300, d4594800,)
.......

other information:-
::regs%cs = 0x0158 %eax = 0x000000a1
%ds = 0xffff0160 %ebx = 0xd479f440
%ss = 0xd479f440 %ecx = 0x00000000
%es = 0xd4530160 %edx = 0xd3e83b40
%fs = 0xfea80000 %esi = 0x00000000
%gs = 0xfea401b0 %edi = 0xd4594800
%eip = 0xfeaa24b7 tcp_unfuse+0x2b
%ebp = 0xd4a76b18
%esp = 0xd4a76afc
%eflags = 0x00010202
id=0 vip=0 vif=0 ac=0 vm=0 rf=1 nt=0 iopl=0x0
status=<of,df,IF,tf,sf,zf,af,pf,cf>
%uesp = 0xd479f300
%trapno = 0xe
%err = 0x0
$ctcp_unfuse+0x2b(d479f440)
tcp_rput_data+0x4a(d479f300, d4594800, d3e8ef40)
tcp_input+0x39(d479f300, d4594800, d3e8ef40)
squeue_enter+0xb5(d3e8ef40, d4594800, feaae3c9, d479f300, 1)
ip_fanout_tcp+0x38e(d5336b60, d4594800, da979714, d3e83ba0, a3, 0)
ip_wput_local+0x1bb(d5336b60, da979714, d3e83ba0, d4594800, d45318c0, 0)
ip_wput_ire+0x1436(d5336b60, d4594800, d45318c0, d513d540, 2)
ip_output+0x70a(d513d540, d4594800, d5336b60, 2)
tcp_send_data+0x5f9(d513d680, d5336b60, d4594800)
tcp_xmit_end+0x88(d513d680)
tcp_close_output+0x115(d513d540, d513d890, d3e8ef40)
squeue_enter+0x1bf(d3e8ef40, d513d890, feaa5924, d513d540, 6)
tcp_close+0x6c(d5336ad8, 83, dad03b48)
qdetach+0x8b(d5336ad8, 1, 83, dad03b48, 0)
strclose+0x2e3(d4675000, 83, dad03b48)
socktpi_close+0xd7(d4675000, 83, 1, 0, 0, dad03b48)
fop_close+0x26(d4675000, 83, 1, 0, 0, dad03b48)
closef+0x56(d508d950)
closeandsetf+0x2e7(16, 0)
close+0xd()
sys_sysenter+0xdc()
tcp_unfuse::distcp_unfuse: pushl %ebp
tcp_unfuse+1: movl %esp,%ebp
tcp_unfuse+3: pushl %ebx
tcp_unfuse+4: pushl %esi
tcp_unfuse+5: movl 0x8(%ebp),%ebx
tcp_unfuse+8: movl 0x2cc(%ebx),%esi
tcp_unfuse+0xe: movb 0x9d(%ebx),%al
tcp_unfuse+0x14: testb $0x1,%al
tcp_unfuse+0x16: jne +0x15 <tcp_unfuse+0x2b>
tcp_unfuse+0x18: leal 0x2d0(%ebx),%eax
tcp_unfuse+0x1e: pushl %eax
tcp_unfuse+0x1f: pushl %ebx
tcp_unfuse+0x20: pushl 0x40(%ebx)
tcp_unfuse+0x23: call +0x75b <tcp_fuse_rcv_drain>
tcp_unfuse+0x28: addl $0xc,%esp
tcp_unfuse+0x2b: movb 0x9d(%esi),%al
tcp_unfuse+0x31: testb $0x1,%al
tcp_unfuse+0x33: jne +0x15 <tcp_unfuse+0x48>

Unexpected Server Reboot on Windows Server 2012 Standard

Hi All,
I have received unexpected reboot on Windows Server 2012 Standard . After searching on the internet I found one
hotfix for this, but it is applicable for Windows 2008 R2. Link to download Windows 2008 R2
hotfix -
http://support.microsoft.com/kb/2732595/en-US
Can someone guide me to get a same
hotfix for Windows Server 2012 Standard.
Log Name:      System
Source:        User32
Date:          2/27/2014 7:27:17 AM
Event ID:      1074
Task Category: None
Level:         Information
Keywords:      Classic
User:          SYSTEM
Computer:      Server1.test.com
Description:
The process wininit.exe has initiated the restart of computer "Server1" on behalf of
user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
Thank you.
Regards,
Mahesh Arban.

Hi Mahesh Arban,
Sorry for my delay.
I can’t find the same hotfix for Windows Server 2012 Standard. So, we may need to do some troubleshootings
to narrow down this issue and solve it.
Please let me confirm if you have installed all updates for this Windows Server 2012 Standard. Meanwhile, please
use Sfc command to scans and verifies the integrity of all protected system files.
In addition, this issue caused to unexpected server reboot. So, please configure and then collect the dump
file to analysis. It may help us to find the root cause of this issue.
How to read the small memory dump file that is created by Windows if a crash occurs
http://support.microsoft.com/kb/315263/en-us
By the way, can you find any error messages in application log (such as Event ID 1000 or others) after this
issue occurred?
Hope this helps.
Best regards,
Justin Gu

How to undo typing errors on an iPad?

How do I undo typing errors on my iPad without deleting backwards through several words?
Jean

Manipulating and editing text ....
Hold down on the area that you want to select until a blue line appears. Tap on it again and another pop up appears with the options to select, select all or paste. If you select all, all of the copy on the page or within the text block in which it was created will be highlighted in blue. An option to cut, copy or place appears. Two blue vertical lines will be on both ends of the text block. You can select the blue dot on one of those lines and drag it to select exactly the text that you want to manipulate.
If you choose select - then blue lines will be on either side of that word only. You get the cut, copy, paste or replace options. You can once again drag the lines with the blue dots to select text. If you drag the line to select more text, you get the cut, copy or paste options.
Cut is self explanatory, copy will put that text in the invisible iPad clipboard and you can select another area in your document in which to paste that copy or you can paste into any other document or field that will accept text. Replace is when the iPad will auto correct a word from it's dictionary if the word you have typed does not "make sense" to the iPad.

Blue Screen, Auto Reboot

Hi,
I'm having this auto reboot with my iPhone 6 iOS 8.1.2 it happened twice during a week time today I've seen the second time with a blue screen for a second only before auto reboot, first time I was using Viber, the second time I was using Safari only! I've updated to this version of iOS since it was launched, I didn't notice this till last Saturday. Any ideas?
I've been using an iPhone for the last 4 years, this is the first time I see something like that.

Hello Ibrahim15,
Thanks for using Apple Support Communities.
Please see the information in the article linked to below for this issue where your iPhone is restarting while you are using it.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Have a great weekend,
Alex H.

2011 Macbook Pro Retina Blackouts and constant Auto-Reboots

Hey guys, thanks for your time to look this through since you are my last hope before I drive 320 miles to Apple Store in Chicago with 14inches of heavy snow under my car...
Here is the case: it happened today that my computer would automatically go blackout, then auto-reboots itself. It happened multiple times that I can't do anything on it. And after its auto-reboots, the screen would go black. If I click the volume keys, or power key, I can still hear the sound of them, but the screen would keep black and the computer is actually working. Thus I have to hard-reboot it by pressing the power button for seconds. But even I enter the OS system, after some seconds it just happens again and again, both on the Mac OS Maverick, and my Bootcamp Win7, no matter the power adpater is plugged or not.
The weirdest thing is: I am now connecting the computer to my Viewsonic monitor, and the computer works perfectly: no blackout, no auto-reboots.
I went to the campus authorized Apple retailer, and the techician told me there is nothing he could do since he is not authorized to diagnose the problem since we both thought it is the hardware problem(on both systems.)
I have tried to reset my PRAM and SMC but none of them works. I haven't found anyone who has the same problem online, and thought my experience might helps someone who has it. And I hope we can figure it out before I drive to Chicago in such a horrible weather...
Thank you so much for your concern and help!

Hey guys, thanks for your time to look this through since you are my last hope before I drive 320 miles to Apple Store in Chicago with 14inches of heavy snow under my car...
Here is the case: it happened today that my computer would automatically go blackout, then auto-reboots itself. It happened multiple times that I can't do anything on it. And after its auto-reboots, the screen would go black. If I click the volume keys, or power key, I can still hear the sound of them, but the screen would keep black and the computer is actually working. Thus I have to hard-reboot it by pressing the power button for seconds. But even I enter the OS system, after some seconds it just happens again and again, both on the Mac OS Maverick, and my Bootcamp Win7, no matter the power adpater is plugged or not.
The weirdest thing is: I am now connecting the computer to my Viewsonic monitor, and the computer works perfectly: no blackout, no auto-reboots.
I went to the campus authorized Apple retailer, and the techician told me there is nothing he could do since he is not authorized to diagnose the problem since we both thought it is the hardware problem(on both systems.)
I have tried to reset my PRAM and SMC but none of them works. I haven't found anyone who has the same problem online, and thought my experience might helps someone who has it. And I hope we can figure it out before I drive to Chicago in such a horrible weather...
Thank you so much for your concern and help!

How can I close out the page I am working on in safari when error boxes keep popping up?

How can I close out the page I am working on in safari when error boxes keep popping up?

What do the error messages say ?

Solaris 8 in ultra 2 got panic and auto reboot when install Oracle software

Dear all,
I installed Solaris 8 by selecting 'Entire Solaris Software Group' and select 32 bit support only in an old ultra II machine. Then I tried to install Oracle 8.1.7 in the same machine but machine always got panic and started auto reboot when Oracle installed about 17% or 20% or even 70% (I tried install the minimum of Oracle).
What is the problem? Anyone can help?
Thanks in advance,
Vicky

I think you need to check the parameters like SHMMAX etc in /etc/system file as recommanded by oracle if not already added you need to add them .Oracle manuals have a list of these parameters and don't forget to reboot and boot with boot -r after adding these parameters.
Make sure you have sufficient memory or some patch recommanded by Oracle .
Hemant
http://www.adminschoice.com

Can't login to Mac X server after an unexpected CPU reboot

I'm using Mac X server 10.4.10.
Here is an interesting situation....after an unexpected system reboot, I was not able to login. This happened 2 twice. The first time, I was able to boot from another drive which was a clone of the drive with the difficulty, I went in to the passwd file located on the drive with the difficulty and enabled the root user, and after doing a startup on the drive with the difficulty, I was able to use the root ID to login. After doing so, I was able to reset the passwords normally used, and they worked going forward.
Some time later, the unexpected reboot occured again. I tried the above method to regain acess and it did not work. So now, I'm wondering what is part of a normal shut down process that is needed to be in place in order for the next login to work.
I ran all the built in disk maint routines but that did not help. I can boot from another drive and have full access to the data, I can also do a restore and over write the OS info with a baseline functional install, but I am wondering if there is another short cut way of resolving this. I'm thinking that there is an encrpyted file that gets out of sync if a proper shut down is not done resulting in an normal login process from happening. I'm not using keychains and do not have any speacial features enabled as well as just running bare bone defualt configs.
This is not the ned of the world...I can redue the install pretty easy and still have access to the data...just wondering if anyone has a short cut process to fix this.

"I would try booting from the cd and resetting the password of a local acount. This will at least allow you to log in. You might want to look into why the server is rebooting though as that seems to be the real problem. "
booting from the install cd...easy......resetting local account...interesting ....how would that be done?

Whenever I try to transfer an ebook to my nook (via a macbook), it says adobe has quit unexpectedly and gives me an error code. Does not successfully transfer the ebook.

Whenever I try to transfer an ebook to my nook (via a macbook), it says adobe has quit unexpectedly and gives me an error code. Does not successfully transfer the ebook.

I was having the same problem using ADE 4.0.2 and Mac 10.10.1. I finally gave up and deleted ADE version 4 and reinstalled version 3.0. Works fine, and I can check out ebooks for my Nook using ADE.

How can I auto load Safari thru a non-Admin user account

Okay, maybe I don't want to do this - - but can I?
I have my old iMac setup to turn on at 8am. I would like to access it remotely through LogMeIn.com. But I need Safari running for remote access.
I'd prefer to have Safari running in a 'Guest' User Account with no Admin rights (then from LogMeIn.com, switch to my user account and I can enter my password manually).
I know how to auto login to a Guest account, but how do I have that account auto start Safari? Only Administrators can have programs start automatically, right?
I don't want to auto-login (with password if that's even possible) to my main Administrator account.
Any suggestions?
Thanks in advance

I use iKey to remap the keys. It has a little more function then youpi key. For many years, I used youpi key before switching to iKey.
In addition, ikey will allow you to run ikey applications when ikey starts.
!http://farm3.static.flickr.com/2700/4178949301_cea8fa07a2.jpg!
You might like iKey/youpi key. I have my frequently used applications set to f keys. The same f key starts an application and switches to the application.
Youpi key is free. It works fairly well for me in MAC OS 10.4 although not officially supported. There is a commercial version you can buy, called iKey.
http://www.versiontracker.com/dyn/moreinfo/macosx/11485&vid=75326
I have the common programs that I use assigned to function keys. I have F4 assigned to Firefox. When I want to start FireFox, I press F4. When I want to switch to firefox, I press F4! Starting & switching to an application in Mac OS are the same thing in Mac OS.
Here is an example of to assign volumn control to a function key.
http://discussions.apple.com/message.jspa?messageID=10361085#10361085
Here is a solution with XTool. XTool Uses exact screen addresses. So a movement of an icon will cause you trouble.
do shell script "/usr/sbin/system_profiler SPDisplaysDataType | grep 'Resolution'" -- get info
tell the result to set {DisplayWidth, DisplayHeight} to {word 2, word 4} -- get resolution
--move mouse {DisplayWidth div 2, DisplayHeight div 2} -- center mouse
move mouse {670, 13} --sound
click mouse
move mouse {673, 96} --sound level
click mouse
move mouse {555, 282} -- center mouse
click mouse
   First, there is the XTools scripting addition, which will give AppleScript the ability to move the mouse.
   http://www.lestang.org/osax/XTool/
   XTool-2.0-src.dmg.tgz
   Installation :
   Drag
.osax from insite the image to one of the following locations (create the directory if it does not exist) :
a : ~/Library/ScriptingAdditions/
   b : /Library/ScriptingAdditions/
   c : /System/Library/ScriptingAdditions/
   I have it in directory /System/Library/ScriptingAdditions/
   My other two directories do not exit: ~/Library/ScriptingAdditions/ &
      /Library/ScriptingAdditions/
.    Next, you will need to place a script application into your login items (System Preferences > Accounts > Login Items) that will move the mouse when you log in:

Ios6 unexpected auto reboot?Safari typing error?

Similar Messages

Maybe you are looking for