IOS6 WiFi Problems, please help!

I have the iPhone 4 and updated to the iOS6 today. Well after updating my wifi will not work.. The thing is I am at college and the wifi here you have to go to Safari and type in username and password everytime. Well when I go to do so, it will not load. PLEASE HELP.

I found a solution that has worked on both iPhone 4's I have that have had the same issues, and also including not being able to download updates in the App store.
Go to Settings > WiFi and turn it OFF.
Next go to General > Cellular > Cellular Data and turn it OFF
Next go back to Settings > WiFi and turn it ON, (wait a few seconds for it to sync with your network)
Finally go back to General > Cellular > Cellular Data and turn it ON.
I had the same issues on both my wife's phone, and my own, and it fixed it immediately without changing any proxy settings or reboots, (which I did try on my phone and did not work, but did not try on my wife's phone)
Hope this helps!

Similar Messages

Ios5 wifi problems please help

I have a ipod 3rd generation and i update into ios5 and the wifi conection start to fail and safari is very slow please help thanks

I had an iPhone that did the same - it would connect to my wi-fi network and the disconnect. After restoring the iPhone with iTunes as a new iPhone with no change, I made an appointment at an Apple store where it was confirmed the iPhone has a hardware problem.
If you have tried everything included with the link provided including restoring the iPhone with iTunes as a new iPhone or not from the iPhone's backup, the iPhone has a hardware problem as I've provided 3 times now.
Message was edited by: Allan Sampson

IPhone 4S Wifi Problem (Please Help !!)

The WiFi on my iPhone 4S has been working perfectly fine until today. It is now greyed out and dim as if disabled, so I can't even access it anymore.
I have tried resetting network settings, toggling cellular data and airplane mode, hard reset, and restoring my phone, but it unfortunately does not do the trick.
Any help and thoughts would be very appreciated. Thanks!

tried it mate, now the thing is, my wifi button is not grayed but it can not find the wifi signal ! sometimes it can, and then it looses the signal ! so in my opinion, there should be some solution or patch for it coz if it has a hardware issue then it stays as grayed but now it's not ! so yea waiting to have some solution for it. Thanks though really appreciated !

HT4623 my voice call services is not working with cellular network...only works fine with wifi..please help?

my voice call services is not working with cellular network...only works fine with wifi..please help?

Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express.

I have an iPhone 4s. After I updated to the Operating System 7, I cannot open the WiFi. Please help.

I have an iPhone 4s. After I updated to the Operating System 7, I cannot open the WiFi. Please help.

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

I am transmitting data over internet and WiFi ,it's working fine with internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi? Please help me.

I am transmitting data over internet and WiFi ,it's working fine with Internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi? Please help me....
Thanks in Advance.
Neeraj@iDev

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

After updated OS X 10.9.5 this afternoon, I couldn't connect to Internet through wifi. Please help me!!!

After I updated osx 10.9.5 I can't connect to internet through wifi. So, what the problem please help me to solve this problem urgent!!!

I've been having horrible wifi connectivity problems with my mid-2012 MacBook Air for the last several weeks. I just realized today that the problems started around the time that I upgraded to 10.9.5 on September 17th.
It's reached the point where I keep Airport Utility up in a corner of my screen so I can see whether I have internet or not before hitting Send or Post.
After reading Linc Davis' post from September 27th, above, I ran the Wireless Diagnostics when I lost internet. Internet access came back while the diagnostics were running. I pressed Continue and lost connection while the second was running. Based on Airport Utility, I do not have connectivity more than I do.
Note that Airport Utility usually shows that it can see the router, but there is no Internet access. Other times it shows that it can not see the router.
Wireless Diagnostics suggested that I restart the router (a new Airport Extreme that I installed in August.) Restarted the router did not solve anything.
All other devices, wired and wireless, are working fine. The affected device is the only one running 10.9.5 wirelessly.
Any help would be greatly appreciated.

TS1398 My iPhone 4S will no longer connect to wifi. Please help

My iPhone will no longer connect to wifi. Please help! I've tried turning it off, restarting, etc.

settings - general - reset - reset network settings.

HT4199 I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need a

I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need advice.

What type network is yu router set up for? The 4G iPod can only connect and see 2.4 GHZ networl like B, G and the 2,4 GHz N. There is also a 5 GHz N but the iPod will not even seethat network.
See:
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Recommended settings for Wi-Fi routers and access points

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

[TV@Master] Problem please help

I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please help

i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

IOS6 WiFi Problems, please help!

Similar Messages

Maybe you are looking for