Ios7.0.2 disabled left right multigestures

Pre ios 7.0.2 I was able to swipe outwards on right side of iPad screen to display open windows. This no longer works since I downloaded ios 7.0.2. Now I have to press twice on big button on bottom of iPad to display open windows. The ability to swipe upwards to close open windows still works.

Is there some setting that needs to be turned on? When I swipe left or right and am on the screen that display all the category squares, nothing happens, ie, the screen stays stuck on the category squares.

Similar Messages

Ios7.0.2 iPad multigesture left right broken

Pre ios7.0.2, was able to use multigesture swipe from right of screen to display open windows. After downloading 7.0.2 left right multigesture doesn't work. To display open windows (and swipe upwards to close them), I have to press twice on big button on bottom of iPad. How can I get left/right multigesture to work on ios7.0.2?

Go to the Settings app. Select General and make sure the switch for Multitasking Gestures is turned on. It will show green. If that is already on, switch it to off, close the Setting app then go back in and turn it on again. If this doesn't correct your issue then
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

How can I disable 4-finger swipe left/right?

How can I disable 4-finger swipe left/right? I map these to far more useful keystrokes in BTT; my mappings still work but it also switches, rendering them effectively useless. This was working for me in Lion until I did an update a couple of days ago. Every other gesture is in trackpad config except these 2.

That actually was disabled in my settings for me so I didn't think so. But I went and enabled/disabled it with no result. I then switched it to 3 fingers from 4 fingers and back again and now it's gone. Knowing what to search for I found this thread, it seems other have had the same problem; thanks for pointing me in the right direction:
https://discussions.apple.com/thread/3191453?start=0&tstart=0

Disable switch to another virtual console with Alt-Left/Right

I'm a Fish shell user, and the Alt-Left/Right keys are very useful for me. But in the virtual terminals those shortcuts are captured and cause a switch between the different terminals (like Alt-F1, F2 etc). My question is, how can I disable that Alt-Left/Right behaviour, since Alt-F1, F2... is more than enough for me.

SanskritFritz wrote:
I got one step closer to my goal:
dumpkeys > my_console_keymap.txt
vim my_console_keymap.txt # deleting the lines with Decr_Console and Incr_Console
loadkeys my_console_keymap.txt
really turns off the switching of consoles, but fish still doesnt get the Alt-Left|Right keys. At least nothing happens, so the situation got better, but I wonder how to pursuade the console to pass on the Alt-Left|Right combo. Any thoughts?
I have the same problem. I can disable the default shortcut but the combination (Alt+arrows) has no effect at all then and I can't use it with any application. Any ideas?

IPhoto 09 - iDVD 09: black Borders left/right AND top/bottom

Setup: Snow Leopard 10.6.3, iPhoto 09, iDVD 09, all patches applied.
Source Material: HiDef 3:2 pictures in iPhoto, arranged in a iPhoto slideshow.
Export: "publish to iDVD" in iPhoto - everything works fine.
Settings in iDVD: professional quality, Always scale slide to TV Safe area: DISABLED. aspect ratio: 16:9
Target: Full HD TV Screen 16:9
Result: the image quality is not great, but ok. But: there are huge black borders left/right (which is perfectly fine given the difference between 16:9 and 3:2) AND on the top and buttom of the TV - which is not acceptable by any means.
When I start the DVD on the Mac DVD-Player, there are no borders in windowed mode, but in full screen too.
It seems as iDVD 09 simply ignores the uncecked "scale..." preset box.
Can anyone confirm this, any suggestions? Setting up the slideshow in iDVD/iMovie itself is not an option here, hence my dad is still struggling to get things right in iPhoto

Bengt Wärleby wrote:
If You select to play back in a smaller window eg cmd+2 or on a TV (4x3)
• still got the border all around ? (it's OK on my Mac (cmd+1 or 2) or on TV)
No, it's just in fill screen mode.
Bengt Wärleby wrote:
This is not an iMovie or Apple problem but due to mixing 4x3 and 16x9 material
It's 2:3 Material (DSLR Pictures), so this won't help.
Bengt Wärleby wrote:
You can try to make this the other way around. Start a WideScreen project and
now You will get the bordet around the 4x3 material instead.
Only solution is to crop or enlarg one of the material types to get it right.
As I stated before, there HAVE to be borders for the 2:3 Material on a 16:9 Screen (unless you do some heavy cropping). But I can see no reason why there should be borders on top/bottom of ANY material. As I see it, it's a problem related to a disfuncional "adjust for TV" setting, not the aspect ratio.
Thanks anyway.
Any other comments?

Facing Strange Problem in DIR HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR? (through parent script/ movie?)

Summary : HARD QUESTION : In the DIR file, the game runs well, right click = no effect. Coz I'm not making right click scripts. BUT in EXE file, right click = ERROR.
Explanation :
In the Adobe Director screen, this DIR file game is worked 100%.
I tested right click EVERYWHERE... NOTHING HAPPENS.
Because I don't make any programming with "on rightmouseup" or "on rightmousedown" command.
THEN, I published it into EXE...
I tested right click EVERYWHERE...I hoped the result will be the same as DIR tests....
WHEN I RIGHT CLICK IN THE AREA THAT'S GIVEN ON EXITFRAME ME, IT SHOWS ERROR, CHANGING PICTURES.....
this does not happened in the DIR file...
I didn't make a runmode program or anything else.... This is awkward... mystery for me...
WHY THERE'S A DIFFERENCE IN DIR and EXE... it should be exactly the same result.
I have used Director for years.... This is really strange for me...
>>>>>>>>HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR?
THIS ONE is useless.... It doesn't prevent the rightmouse click,...
      on rightmouseup me
             nothing
     end
      on rightmousedown me
             nothing
     end

Dear Adobe Forums friends
I need your help and guide through this problem...
In the game's dir file that is run on the DIRECTOR softwawre,
the game runs perfectly, I can do LEFT CLICKS (coz I programmed the script)
and when I do RIGHT CLICKS = there are no effect ( coz I don't do script for it)
LATER THIS GAME TURNED INTO EXE.
It supposed to run like the dir file as ABOVE. BUT STRANGELY, WHEN
I DO RIGHT CLICKS, it turns Error and showing as the picture attachment.
The right clicks that goes error are above the picture of numeric button only. (in DIR file
this run normal). I looked into the script behind the numeric button picture, there are only "on exitframe me", there are no script I made inside the "on exitframe me" that is triggering RIGHT CLICKS.
1. I wonder why there are differences in DIR and EXE effect
2. Why right click? Left click effects are all normal.
3. IS THERE ANY WAY TO DISABLE ALL RIGHT CLICKs since the beginning of EXE. So the game will be run normal. I don't need right clicks anyway, but whenever people do right click there will be ERROR.??
4. Is there any way to STOP THE MESSSAGE BOX TO APPEAR IN FRONT OF THE GAME? (I hate the Dirrector Error Message Box), or auto press OK.
NB: this game uses Buddy API Xtras, File IO Xtras.
Thx
David S

Moving tabs (left-right arrangement) doesn't work

Trying to move a tab to the left/right to re-arrange them and it doesn't work. It looks like tabs are not movable at all.
Restarting FF with addons disabled doesn't solve the problem.
Were should I look or where to raise a bug ticket?
Thanks.
FF 32.0.3
Win 7x64

Weird stuff - left computer on for night, firefox on too, and in the morning was able to grag the tabs around.

Alt shortcuts not working for alt-left/right or for é, í etc

Hi guys,
I've had this problem for a while now… Essentially, the issue lies in the alt-shortcuts for left and right where one is usualy able to 'word jump', and the creation of accented characters like é and í using the alt-e shortcut. All other alt functions appear to work fine for the moment. The alt-left/right shortcut still works when shift is held down, and highlights all the characters that have been passed over, as it should. The output for alt-e is completely blank, and the alt-left/right output is nothing, unless shift is also held.
I have a British English MacBook Air keyboard on Mountain Lion, and I have set it to that layout, and I regularly switch between this and greek for scientific formulæ. I've fiddled around with language and input settings trying to get it to work again to no avail, and there are no shortcuts programmed to that to my knowledge. I have checked on a guest account and it seems to be account specific. Ideally I'd like to keep this account without migrating everything over - does anyone have any ideas with regards to how to track down where the problem is?
Thanks in advance to any responses!

If only alt + e is not working, double check system preferences/speech to make sure it has not been set as a trigger for text to speech or speech recognition or whatever.

Display screen moves up/down & left/right

I am using a Cinema display on a G5 and when I move my mouse around the screen the screen shifts by several pixels to the left/right/top/or bottom depending on which way I am moving the mouse. It is as if the screen does not fit completely within the display. Right now my resolution is set to: 1680x1050.
Its a strange problem that is really more distracting than anything else. Any ideas regarding what I can do to fix this?
many thanks,
Zach

Open the Universal Access pane of System Preferences and turn off the Zoom option in the Seeing tab.
(24932)

Add tool tip to left right button in JTabbedPane??

Hi,
I am using a tabbed pane with follwong setting.
tabPane.setTabLayoutPolicy(JTabbedPane.SCROLL_TAB_LAYOUT);
So when the no of tab is more a left right button appears.
I want to add tool tip to these button
How do i get the instance of these buttons
thnx
Neel

try this for east/west, similar for north/south
(hopefully there's an easier way)
import java.awt.*;
import javax.swing.*;
class Testing extends JFrame
public Testing()
    setLocation(300,200);
    setSize(150,100);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JTabbedPane tp = new JTabbedPane();
    tp.setTabLayoutPolicy(JTabbedPane.SCROLL_TAB_LAYOUT);
    tp.setUI(new MyUI());
    for(int x = 0; x < 12; x++)
      JPanel p = new JPanel();
      p.add(new JLabel(""+x));
      tp.addTab(""+(char)(x+65),p);
    getContentPane().add(tp);
class MyUI extends javax.swing.plaf.metal.MetalTabbedPaneUI
    protected JButton createScrollButton(int direction)
      if (direction != SOUTH && direction != NORTH && direction != EAST && direction != WEST)
          throw new IllegalArgumentException("Direction must be one of: SOUTH, NORTH, EAST or WEST");
      return new ScrollableTabButton(direction);
    private class ScrollableTabButton extends javax.swing.plaf.basic.BasicArrowButton implements javax.swing.plaf.UIResource,SwingConstants
      public ScrollableTabButton(int direction)
        super(direction, UIManager.getColor("TabbedPane.selected"),
                         UIManager.getColor("TabbedPane.shadow"),
                         UIManager.getColor("TabbedPane.darkShadow"),
                         UIManager.getColor("TabbedPane.highlight"));
        if(direction == WEST) setToolTipText("<<<<<");
        else if(direction == EAST) setToolTipText(">>>>>");
public static void main(String[] args){new Testing().setVisible(true);}
}

Magic Mouse left right swipe not working

I got the mouse with my computer about a month ago. And suddenly, the left/right swipe has stopped working. I've wiped down the top and changed the batteries. I restarted. It doesn't seem to be working.
Has anyone else had this problem? Does anyone know how to fix it?

Take it back to Apple and get a new one, yours is still under warranty.

Is there a way to adjust the left/right output?

Is there a way to adjust the left/right output on the iPod?
Mine seems to push a little harder on the left side no matter which
ear devices I use. My hearing in my right ear is a little weaker,
so I'm hearing mostly just the left side instead of an equal balance.
My best earphones don't fit the same way when reversed, so they don't
sound anywhere near the way they should. You know the drill-- no
fit, no seal, no bass... no good.
And, yes, I know I can make a crossed connector cable...
Thanks for responding.

using the 30 pin connector means it bypass the volume switch so you can't adjust the volume, see adjust the EQ setting helps. Otherwise you have to add the switch (a pre-amp etc) in between the iPod and your device

Can Trackpoint left/right button definition be the same to Touchpad?

I am used to using external mouse with left hand, but using Trackpoint with right hand. However, in the UltraNav utility, when I swap the left/right button for external mouse, the Trackpoint is also affected by this swapping.
What I want is external mouse for Left hand and Trancpoint for right hand. Howeve I can't set that for Trackpoint specifically. Can anybody help me on this?
So many thanks!

Hi Batterry,
There is no need for removal of the product . You can simply launch the product , click on Help>Sign out . Close the product and sign in with the new user's Adobe ID & Password. This should activate the product .
Cheers,
Kartikay Sharma

Left/right Keys appear to be stuck

Here's the problem:
I'm not sure what exact keys are stuck, but it appears that my computer is receiving constant left/right input. It only appears in certain areas though. For instance, a Finder window will constantly shift left and right. This also occurs in the main iTunes window. Drop-down menus are unusable... as soon as I click on them, it immediately selects an option. But right now, as I type this, I can hit the left and right keys and it works just fine.
I've tried restarting, unplugging and plugging in my keyboard, as well as making sure my software is up to date.
Thanks for reading this.

Welcome to Discussions - that sometimes happens to me as well, to fix it I right-click on purpose, and then select one of the choice, then the right-click goes away again. You can also re-start.
Let me know what worked,
Miriam

How to format paragraph string to show content left, Right or middle of pdf document using iTextsharp ' vb

Dear All
how to format paragraph string to show content left, Right or middle of pdf document using iTextsharp in visual basic and absolute position on the document.
Thanks

Here is one more example that i have modified the GetCell function so that you can use it for adding all the cells to the document. It takes several arguments to specify everything you need to create each cell. It now lets
you specify the Text, the Text Alignment, the Text Font and color, weather the cell shows the Border, the BackColor of the cell, and the Padding values for the Left, Right, Top, and Bottom.
If you study the code you should be able to figure out how it works. From here you can figure out the rest of what you need to do and how to use the
GetCell function.
With one quick google search for "iTextSharp Documentation" the first link to pop up was this link.
iTextSharp Documentation
Imports System.IO
Imports Its = iTextSharp.text
Public Class Form1
Private dt As New DataTable
Private Sub Form1_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
dt.Dispose()
End Sub
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
dt.Columns.Add("Name")
dt.Columns.Add("Age")
dt.Columns.Add("Birth Date")
dt.Rows.Add(New Object() {"Johnny", "23", Now.AddYears(-23).ToString})
dt.Rows.Add(New Object() {"Frank", "41", Now.AddYears(-41).ToString})
dt.Rows.Add(New Object() {"Rex", "33", Now.AddYears(-33).ToString})
dt.Rows.Add(New Object() {"Kim", "26", Now.AddYears(-26).ToString})
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim MyPdfFilePath As String = "C:\TestFolder\MyPdf.pdf"
Dim pSize As New Its.Rectangle(Its.PageSize.A4)
Dim PdfDoc As Its.Document = New Its.Document(pSize, 10, 10, 10, 10)
Dim PdfImage As New Its.Jpeg(New Uri("C:\TestFolder\MyLogo.jpg"))
PdfImage.Alignment = Its.Jpeg.ALIGN_CENTER
Dim pTable As New Its.pdf.PdfPTable(1)
pTable.AddCell(getCell("Name : " & TextBox1.Text, Its.pdf.PdfPCell.ALIGN_CENTER, Its.FontFactory.GetFont("Arial", 15, Its.BaseColor.BLACK), False, Its.BaseColor.WHITE, 10, 0, 0, 0))
pTable.AddCell(getCell("Policy : " & TextBox2.Text, Its.pdf.PdfPCell.ALIGN_CENTER, Its.FontFactory.GetFont("Arial", 20, Its.BaseColor.RED), False, Its.BaseColor.WHITE, 10, 20, 0, 0))
Dim cTable As New Its.pdf.PdfPTable(dt.Columns.Count)
For Each col As DataColumn In dt.Columns
cTable.AddCell(getCell(col.ColumnName, Its.pdf.PdfPCell.ALIGN_CENTER, Its.FontFactory.GetFont("Arial", 12, Its.BaseColor.WHITE), True, Its.BaseColor.BLUE, 3, 5, 0, 0))
Next
Dim tblfont As Its.Font = Its.FontFactory.GetFont("Arial", 10, Its.BaseColor.BLACK)
For Each row As DataRow In dt.Rows
cTable.AddCell(getCell(row.Field(Of String)("Name"), Its.pdf.PdfPCell.ALIGN_LEFT, tblfont, True, Its.BaseColor.WHITE, 3, 4, 3, 0))
cTable.AddCell(getCell(row.Field(Of String)("Age"), Its.pdf.PdfPCell.ALIGN_CENTER, tblfont, True, Its.BaseColor.WHITE, 3, 4, 0, 0))
cTable.AddCell(getCell(row.Field(Of String)("Birth Date"), Its.pdf.PdfPCell.ALIGN_RIGHT, tblfont, True, Its.BaseColor.WHITE, 3, 4, 0, 3))
Next
Using fs As New FileStream(MyPdfFilePath, FileMode.Create, FileAccess.Write, FileShare.None)
Using pdfWrite As Its.pdf.PdfWriter = Its.pdf.PdfWriter.GetInstance(PdfDoc, fs)
PdfDoc.Open()
PdfDoc.Add(PdfImage)
PdfDoc.Add(pTable)
PdfDoc.Add(cTable)
PdfDoc.Close()
End Using
End Using
PdfDoc.Dispose()
End Sub
''' <summary>Creates a new cell for the table.</summary>
''' <param name="text">The text string for the cell.</param>
''' <param name="alignment">Alighnment for the text string.</param>
''' <param name="textfont">The font used for the text string.</param>
''' <param name="border">True to show the cell border. False to hide the cell border.</param>
''' <param name="backcolor">The background color of the cell.</param>
''' <param name="padtop">The amount of padding on the top of the text string.</param>
''' <param name="padbottom">The amount of padding on the bottom of the text string.</param>
''' <param name="padleft">The amount of padding on the left of the text string.</param>
''' <param name="padright">The amount of padding on the right of the text string.</param>
Public Function getCell(ByVal text As String, ByVal alignment As Integer, ByVal textfont As Its.Font, ByVal border As Boolean, ByVal backcolor As Its.BaseColor, ByVal padtop As Single, ByVal padbottom As Single, ByVal padleft As Single, ByVal padright As Single) As Its.pdf.PdfPCell
Dim cell As New Its.pdf.PdfPCell(New Its.Phrase(text, textfont))
cell.BackgroundColor = backcolor
cell.PaddingLeft = padleft
cell.PaddingRight = padright
cell.PaddingTop = padtop
cell.PaddingBottom = padbottom
cell.HorizontalAlignment = alignment
If Not border Then cell.Border = Its.pdf.PdfPCell.NO_BORDER
Return cell
End Function
End Class
If you say it can`t be done then i`ll try it

Ios7.0.2 disabled left right multigestures

Similar Messages

Maybe you are looking for