Ios7.0.6 update problems?

After updating my ipad the ipad feels warm while charging and it will not charge up

Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
If you take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Similar Messages

  • Ios7.1.4 update problems

      I decided to update my phone thursday night to ios7.1.4. After installing it shut off immediately. which is normal since it restarts. The problem though is that my phone refuses to turn on, yet it keeps flashing the apple logo on the screen. this has been two days now...... Help????  

    There is no iOS7.1.4, at least not yet.
    Current version is 7.0.4.
    Put the device in DFU mode and restore.

  • TS1559 I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem

    I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?

    I have the same problem.  After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work.  I took the phone to Verizon, but they said they can't fix it, go to Apple
    I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now.  I'm also not going to buy any more Apple products.  Their upgrade caused this problem, and they are not standing behind their producet.

  • I am trying to download a movie from itunes, but ithere's isn't enough room to download. I have a iphone4, have deleted every app possible. Slimmed down photos to hardly anything. I could never update to ios7 because of storage problems. Only 2.5 GB avail

    I am trying to download a movie from itunes, but ithere's isn't enough room to download. I have a iphone4, have deleted every app possible. Slimmed down photos to hardly anything. I could never update to ios7 because of storage problems. Only 2.5 GB available out of 5GB after deleting everything. I'm also out of town and cannot connect to a computer. I have wifi access though. Help?

    Update
    OK, Today I went ahead & booted & tried again & it worked this time.
    Not sure why it didn't yesterday. Maybe the servers were just overloaded? Several others reported similar.
    Also yesterday when I ran Speedtest it showd download at about 25 mbps, This morning just before I re-started the download it was showing just above 30 mbps.  So maybe the internet was less busy? Or at least the parts between me & the test server.
    & so far it is working ok.

  • IPhone5 stuck in recovery mode during iOS7.0.6 update - no way to secure media?!

    Hi Apple,
    I have run your recent iOS7.0.6 update on my iPhone5 and it got stuck in the Apple logo + progress bar screen (N.B. I had no problems updating an iPadAir and iPhone4). To get it out of the update infinite loop (no pun intended!) I put it into recovery mode, i.e. pressed Power+Home buttons until I got the blue iTunes + USB cable screen. iTunes wants to restore the phone continuously and I cannot get it out of the recovery mode now to save my media. Do you have any suggestions?
    Many thanks!

    dr4712 wrote:
    That is not very helpful, TJBUSMC1973.
    Is there really no way to get the media off the phone before restoring it?
    No, once the device in is recovery mode, there is really no way to get the media off of the phone.  However, perhaps you have an iCloud backup?  Check www.icloud.com and log in with your Apple ID & password to see fi you have any data there.
    Other than that, you'd have to independently research third-party data recovery processes that may or may not be helpful.  But since those are not approved by Apple, we can't make any recommendations.
    The device has effectively 'crashed'.  That's why you can't get the data.  Other than the third party options I mentioned, all your Apple-authorized options have been explained.

  • Mail app has crashed following ios7.0.2 update

    My mail app has crashed following ios7.0.2 update , help?

    Same problem, tried a full erase but when trying to restore from data from back up, problem reoccurred.
    Tried same process again with full erase and reset but failed, handset now has unknown system error when tryign to restore as new phone. If you reset suggest that do not then try to restore data from back up as picks up the original bug.
    Think it is going to have to be a trip to the apple store!!

  • Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker,

    Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker, & phone only).  Was this former-feature now an oversight??  I'd really appreciate having my Bluetooth once again listed as a choice of  audio option.  Especially considering the battery life is not what it was prior to this update, and requires recharging often.

    Sorry to tell you but unless you have a Retail Apple Store close by, they are the only ones I have found with all the adapters and accessories. I bought an extra lightning to usb adapter the other day to use in my truck. Good luck....

  • Update problem - VBDATA table

    Dear All,
    We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
    Sometime the UPD and UP2 work processes hung without apparent reason.
    In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
    In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
    Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
    As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
    The Production and the Developer systems seem not affected by this problem.
    Have you got any idea about the reason of the problem?
    Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
    Thanks in advance,
    Federico Biavati
    My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

    Hello Siva,
    This is what I did:
    > Check how many entries do you have in VBDATA currently.
    More than 1.000 in every SAP systems that Iu2019m creating from Production
    > You might want to run the reorganize updates program to clear the old updates
    > that are pending/in error
    Good point!!
    After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
    Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
    Thanks for you help,
    Federico

  • Chart x scale update problem

    LabVIEW  8.5.1
    Sweep Chart Problem
    The x scale values do not update until after the 2nd sweep.  The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
    It appears to be a problem with the chart, since it happens with any vi with a sweep chart.  I've used versions 6 through 7 for years and never seen this.  I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
    I've included a simple example.
    Thanks much,
    JSC321
    Attachments:
    Chart Sweep Scale Update Problem.vi ‏32 KB

    You have a typical race condition!
    There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
    All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
    (Execution order is enforced even if the wire value is not even used inside the loop )
    Try it!
    Message Edited by altenbach on 12-23-2008 11:08 PM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    HistoryRace.png ‏10 KB

  • Updating problem...I have a update that starts out going through but then does not finish just keep running

    also with the update problem it says software update and below the running bar it says connecting to the server

    Please do the following:<br><br>
    #Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop.<br><br>
    #Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').<br><br>
    #Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox<br><br>
    #Finally run the installation file you downloaded to the desktop earlier.<br>
    Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

  • IPod touch 4th generation ios7 is not update

    iPod touch 4th generation ios7 in not update
    Pls help me

    iOS 7 is not supported by the 4th generation iPod touch.
    IOS 7 : NOT AVAILABLE/NO UPDATE
    Last try to explain this. (from my side atleast)

  • 10.5.7 update problems

    After installing the 10.5.7 update, Mail, iTunes and iPhoto will not run anymore. Anyone else having this problem?

    jjtopspin wrote:
    Before I came to these apple discussions re: update problems with 10.5.7, I tried to update this version yesterday and at the end of the download this message came up, the update "Mac OS X update" can't be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed to Apple.
    I got the same message. The downloaded file that generated the message was only about 560 KB, indicating it was an incomplete download. I moved it to the trash & tried again. The second download attempt succeeded. I had a minor if nerve-wracking issue with the update (the blue looping screen reported in another topic in this forum) but after a forced shutdown & restart the update was completed successfully.
    I have since updated my two other Macs so all those listed in my profile are now running 10.5.7. All do so without any problems & in fact work better & more stably than ever before.
    I doubt that I'm unusual in this respect. Some users will have problems but I believe most won't, & for those that do most problems will turn out to be caused by something other than the update itself. So it has been for every previous Leopard update; I see no reason to think this one will be any different.

  • Cache update problem in Integration Directory

    Hi all,
    We have a cache update problem in our PI development server.
    If we try to edit, save and activate any of the ID objects, under Cache notifications>Central Adapter Engine> all these objects are displayed as gray items.
    We have tried:
    1. Clearing the SLD Data Cache.
    2. Did SXI_CACHE complete refresh.
    3. Did CPA cache refresh.
    4. Did a complete cache refresh of the server.
    5. Restarted the server.
    But still the problem has not bee resolved. Could you pls provide your inputs and resolution points.
    Thank you very much.
    regards,
    Jack Nuson

    HI Jack ,
    first try to manually update the cache from ID select on your cache notifiaction and click on delta cache refresh button and refresh button .IF it does not yied any result then
    Perform a full cache refresh using the URL
    http://<host>:<port>/CPACache/refresh?mode=full . If the cache refresh happens properly then your problem will get resolved other wise you have to see the cache log to view why it failed there it will show you the exact reason . You might need to restart your java server also if the problem persist .
    Regards,
    Saurabh

  • Twitter Update Problem

    Seems I have a Twitter Update problem. 1. I have no pirated software on my computer either from the App Store or anywhere else. 2. I did buy a set off templates for iWork through the App Store with my Bosses Apple ID (it's for work). Is that really the problem. That's ridiculous.  The apple ID is mine, as is much of the software, but it's a computer use for work. If this is true it makes the App Store a lot less useful.

    my apologies I was so annoyed. I didn't bother to state my issue. The issue is: Twitter is constantly asking to be updated. Even after it's updated. Even if it's deleted. I looked at the forums for a solution and found that people were having this problem who installed pirated app store apps.
    I am logged into the app store on my account. All but one of the apps on my machine that come from the app store are on my account. However there is one piece of software on my account that I purchased, by logging out and logging in with her ID, purchasing it, installing and logging out, and again logging in as myself. I don't have an issue with that app. However Twitter, which was installed under my username, constantly says it needs to be updated. Hope that makes it clearer.

  • HT4623 Update problem

    Hello
    How do i solve problem when i'am doing my update from 5.1 to 6.1.2 the massage (3194) occured. Please help me to solve this update problem.
    I'am using iphone 4

    See this support document http://support.apple.com/kb/ts4451

Maybe you are looking for