Ios7: iphone mailbox problem : can anyone help ?

After installing ios7 i have a problem on my iphone 5. I have two mailboxes - the secondary mailbox keeps greying out so that i can't access it . A reboot or re-inputting the password cures the problem ( for a couple of hours ). Is there a permanent fix for this problem please ? Many thanks.

Open Mac Mail.
From the menu bar click Mail > Preferencees then select the Accounts tab then the Account Information tab then click + to add the account.

Similar Messages

Gmail on iphone was working fine until yesterday when it prompted me with the message cannot get mail user name or password for gmail is incorrect, i have tried deleting the account and re-created a new account, same problem, can anyone help?

gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?

paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.

I bought a iphone 3gs off a family member it says sim not installed to iPhone on iTunes can anyone help please ...?

i bought a iphone 3gs off a family member and its on o2 i activated the o2 sim in a bb because o2 support advised me to activate on different phone as mine will not sync it says sim is not installed to iphone on itunes can anyone help please ...?

cheers for the reply mate yeah she said that its locked to o2 so i done all i mentioned above also spoke to a o2 advisor and he didnt have a clue its stupid i have searched the internet for this problem and cant find a thing i cant be the only person to have it happen lmao its well annoying and stupid if you ask me nothing is simple these days ow well guess i will have to go to the apple store
thanks again mate appriciate it

I bought a new Epson printer WR-7620 on Saturday and the Air Printer is not working. I spoke to Epson and they said it is an Apple problem, can anyone help. Thanks Peter

I bought a new Epson printer WR-7620 on Saturday and the Air Printer is not working. I spoke to Epson and they said it is an Apple problem, can anyone help. Thanks Peter

Peter,
deggie gave you that link so you'd know that airprint is a reduced-options print system, designed for mobile devices (not Macs), and you need to use the specific airprint driver on the Mac when adding the printer if you want Airprint, no-options printing. Otherwise, select the "non-airprint" driver when you add the printer.
It may be helpful to Reset the Printing System to get OS X to find the right driver.
Mac OS X: How to reset the printing system - Apple Support
(And "not working" doesn't help us to help you - please give more detail next time)

How do I change DNS to Business Catalyst servers. I am having problems can anyone help please?

How do I change DNS to Business Catalyst servers. I am having problems can anyone help please?

What problem are you having?
Have you read this KB? - Domain name and DNS: Quick reference

HT1424 IPSec VPN connection brings up login box but will not connect after entering password. Have tried this on both IPAD and IPhone 4. Can anyone help? thanks

IPSec VPN brings up login box but will not connect after entering password. Have tried this on both IPAD and IPhone 4. Can anyone help?

Uggh, it's so frustrating! I've googled every search phrase I can think of and this seems to be the only thread describing this exact issue. I'm always automatically logged into Facebook on my MBP but just to be sure I logged out and back in and it worked fine.
I gotta say, I wasn't a fan of the Droid I had preceding this iPhone, and from what I hear the iPhone app for FB is a thousand times better - not that I'd know personally because I can't log in!! - but I could always access my FB account on the droid. Just sayin...

Connecion problems, can anyone help?

Hello,
Ive recently brought an 8900 from ebay, im with orange in the uk and have the blackberry addon data usage thingy. I've been usign it for a while now, and the connections seems really really slow. So kinda guessed, well GPRS sucks. But I've recently went into the browser settings, and switched from the default Internet to Orange World (wap) and this is like a zillion times faster. On the default it can take up to 2-3minutes for the browser to get off requesting and start loading the page, even on just google, yet on the orange world zip it loads in seconds. Whats the difference here? All my apps run slowly, presuming with the default settings, is there anyway to get these speeds up to that of the wap setting?
Can't understand why the default internet settings suck so badly. Have just updated all my software, done a reboot from scratch, redownloaded my service books and nothing its still the same. Can anyone help?
Many thanks,
Mike

Have you tried restart your computer and unplug your iPhone from the cable? I sometimes have this problems and I was told to unplug and re-plug the iPhone.
Hope it helps.

Batch processing problems-can anyone help?

Setup: Quadcore, 4GB RAM, 4 internal drives all with plenty of space, Leopard OS, latest version.
Software: CS4 with Photoshop Extended; all updates installed. I also have CS3 installed; only use Bridge and PS in both apps.
Problem: Working in CS4. All edits/crops/corrections done in the Camera Raw window; all edits saved and viewable in Bridge. However, when I use Batch from the Tools dropdown (Tools > Photoshop > Batch), and check all the usual places, select an Action, select a Destination, and hit "Go", the results are totally weird. Some images process as expected, but many are at least two stops overexposed.
All individual files will Open, and can be Saved As manually; all works fine. That is in fact how my assistant and I got the job done tonight. The Batch Action is simplicity itself: Open, Save As (JPEG level 9), and Close file—but if I run Batch on the same files that can be opened and Saved As perfectly, it all goes crazy; three quarters of the files are totally overexposed, in blocks (10–25, roughly), and at random.
I have used the Ctrl + Alt + Shift after opening Bridge; I have run Cocktail; and lit the right incense. But this still will not work properly! Can anyone help???

Batching the same files in CS3 works perfectly, in terms of the processed JPEGs at least being correctly exposed, but the CS4-only edits (like the healing brush) are not recognised, nor are many, tho' not all, of the crops.
I have decided to deactivate and uninstall, then reinstall CS4, after upgrading to Snow Leopard. Usually, I wait for a few months for others to report on OS update interactions with CS and FCP, but since CS4 as installed was useless and I had done the usual resets of Preferences without any change to Batch Processing's reliability, I felt I could not be worse off.
So, after upgrading to Snow Leopard, I will reinstall CS4 (and all apps this time, rather than just PS and Bridge, as I usually do) in case there are soime weird unintended consequences of a Custom install.
Very frustrating and time-consuming, and I wonder what I might have done to create this problem—seeing as no one commented, I can only assume that this is an unique experience.
I will report back today, hopefully.

TS3367 FaceTime activation problem; can anyone help?

Hey guys, i have been trying to activate my FaceTime and iMessage on my iphone 4. However, after entering my apple ID and password, I keep getting the 'waiting for activation' message, followed by 'error occurred while activating'. Can anyone help?

http://support.apple.com/kb/TS4268

ICloud backup problem, Can anyone help?

Hi. I'm switching from one iPhone 4 to another and it says no iCloud back up available so asks me to set up as a new phone. I'm def using the correct apple I'D and password. Can anyone help?

See Recovering iCloud or MobileMe data from iTunes backups for an iOS device

Saving Problem, can anyone help me?

To All,
I am having a severe problem with saving my GUI.
Due to the fact i have internal frames, i am using JDesktopPane, and i am trying to save the whole desktop, so that when i load it, i can add this desktop to the GUI again.
I do this action from the menu "save" and "open" option, but when i do it, there are a lot of exceptions, and does not work.
Am i doing this the right way? If not can anyone help me?
Thank You.

There are a lot of issues with saving off Swing stuff. Note all of the notes about swing serialization only be suitable for short term uses. Its hard to tell from your post, but it sounds like you might be trying to serialize it. The thing to do is to mark all of your swing stuff as tranient, and/or make it externalizable. Then, you save any important data and reset it when you readExternal (things like window position and so on) its a pain , but it should work and you will have more assurance that things saved will work in later releases. You can try different vairations of this, but I suspect the major errors have to do with you trying to save off iomages and so on. Really better to rebuild this stuff then try to unserailize it. More effecient too!

Major problem - Can anyone help?

Hi,
A couple of months ago I was downloading the OS update and my computer was turned off (at the plug) by mistake. Since then I can't load up properly in my own user (although other users can access theirs OK).
All I get is that the wallpaper loads on the desktop and I get a spotlight icon in the top right of the screen and the cursor wheel just spins - and that's it.
I can't use it or access my files. Can anyone help by telling me how I can:
a, fix the problem of loading up or
b, access my files from another user when they don't have priveleges.
Any help is appreciated as I have some important files I need to get hold of and can't.
Mac Mini Mac OS X (10.4.7)

Hi,
A couple of months ago I was downloading the OS
update and my computer was turned off (at the plug)
by mistake. Since then I can't load up properly in my
own user (although other users can access theirs
OK).
All I get is that the wallpaper loads on the desktop
and I get a spotlight icon in the top right of the
screen and the cursor wheel just spins - and that's
it.
I can't use it or access my files. Can anyone help by
telling me how I can:
a, fix the problem of loading up or
b, access my files from another user when they don't
have priveleges.
Any help is appreciated as I have some important
files I need to get hold of and can't.
Mac Mini Mac OS X (10.4.7)
Login as a different user, then find the folder on the hard drive where your files are, select this folder in the Finder window and "Get Info" on it from the "File" menu. In the Get Info window go down where it says "Ownership & Permissions" and select the "Details". Change the owner of that folder to the name of the user that you are logged in as. You may need to enter the administrator password to authenticate, this will give you full control (read/write) access to the files inside the folder as admin. Repeat these steps for each folder that has items you want to retrieve. After you retrieve the files you want, you should just do a re-install of the Operating system from the install disk. The system is most likely corrupt and beyond repair since the update was halted by a power failure.
Good Luck!

Jukebox Zen Xtra problems - can anyone help

Hi
I have a 30G Xtra Jukebox. Of the original memory I have about 7.5 G free. Problem is I cannot seem to use it. Everytime I transfer from media source the track number goes up but the memory counter stays the same. When I unplug the track are simply not there.
I have reformatted and reloaded, all fine until I want to add extra then the same problem. I have updated the firmware, cleaned the disk. All to no avail. Is there a maximum number of tracks that I can have, I thought that as long as I have memory I can keep recording?
Can anyone help. thanks.........................

The limit is around 6,000 tracks, but varies with the amount of tag data. Lots of tag data and it will be less.

Time Machine interface problems-Can anyone help?

I can only enter Time Machine through its file folder. The graphic interface only opens a blank window. Weird. Can anyone help?

I'm having the same problem.

I need the settings for a mail provider, fsmail, to add the mail to my iPhone 6. Can anyone help ? I have tried contacting the provider, which is EE, but they are impossible to get anything out of.

I have an old female.net account, which I want to manually add to my iPhone. However I can't find all the necessary settings to be able to do so. Can anyone help ? the provider, EE, has proved impossible to get anything from.

Well, in that case, you need to log into your account at female.net and get the mail setting from there.
Mail accounts have nothing to do with your carrier - they just provide your phone connection, so it's not really surprising that EE were not helpful, because this e-mail account has nothing to do with them.
Go to female-net and get the mail setting from there because the account is with them.

Ios7: iphone mailbox problem : can anyone help ?

Similar Messages

Maybe you are looking for