Ios7 is out now and when i go to software update in settings it says i am up to date at ios 0.6.3
Ios7 is out now and when i go to software update in settings it says i am up to date at ios 0.6.3
What version of the iPod touch do you have? iOS 7 only works with 5th Generation.
The Apple servers are slammed right now with iOS 7 downloads AND activation requests.
Be patient and try again later.
Similar Messages
-
In Adobe Send, I have sent files several times now and when the recipient clicks the link to open, it says page cannot be found. This just started happening. What needs to be corrected?
I can think of a couple of reasons for this behavior.
You inadvertently turned off the sharing for the files.
The link that the user is clicking on is incomplete; perhaps it got broken across lines in an email message. Are you sending Anonymous Links or Personalized Invitations? If the former, are you certain that you copied the entire link?
Some things to try.
Have the user send the link back to you so that you can test it. Does it work for you?
If you look at your Sent Files list, is the name in the Sent To column struck through (e.g., John Smith)? That would indicate that it has been unshared.
If you could get back to me with answers, perhaps we can get to the bottom of this. -
I am trying to install garage band onto my ipad but it says i need to be in ios7. but when i go to update my system it says I am upd to date (with ios 5). What do I do??
Download the current GarageBand version to a computer's iTunes library, go to the device, sign into the iTunes App Store with the Apple ID used to do that, and try downloading it from the list of previous purchases. If that doesn't work and you don't already have a copy of a compatible version, you can't.
(101177) -
I have OSX 10.6.4 and when I go to software update it says I am up to date......what to do?
I have OSX 10.6.4 and when I go to software update it says I am up to date......what to do?
Hi,
I did this but it did not work. I notice that SoftwareUpdate.plist when I have dragged it to the desktop is still in Preferences.
Also, I am doubtful that I am really in safe mode as it does not say so and when I press shift on start up tone i get rapid non-stop flashing of smaller grey symbols: do not enter, question mark, apple logo; so, in order to get the flashing to stop I momentarily release the shift and the larger grey apple logo comes up and then I press shift as quickly as I can then I release it as the gears start spinning.
I really appreciate your time and trouble on this. -
I'm trying to undated my iPhone and it won't go past checking for undates?
Are you trying to do this from the phone, or via iTunes? If it is not working on the phone, try a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. Try the update again. You might also want to connect the device to the computer and iTunes and try to update from there.
-
How can I update my iPad?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
And i have reset my iphone several times, it dosent help
helpsame for me. Via safari I can log in to my FB account but with the app no luck . . .
-
hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder> go it says this file doesn't exist. can some1 plz help? how can i put all my application through application folder?
Something really odd is going on. In your first screen shot, I noticed that the Applications folder does not have the proper icon displayed in the side bar. Also, in the title bar it lists it as Applications 08-59-29-909.
Not sure where it's picking up that odd name, unless it's because it's still truly within the Trash folder.
Try this. In the Finder > Preferences > General > turn on "Always open folders in a new window". (I have a feeling you have the default setting with this off).
Now, in Finder > Go > move down and open the Applications Folder from there. Now open the folder where you see all your applications that you show in your screen shot, select all, and move them to this true appliactions folder.
This is what you should properly seeing (but with different apps listed):
See how the Applications folder has the icon of the letter A shaped with a pencil, ruler & pen. -
I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
Is there anything I should do differently? Is anyone else facing the same issue?
Kindly help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
When trying to do an update for Settings on my iPad I had to change my password. Having done that I am now stuck at 'Terms and Conditions My iPad is locked down it will not let me 'agree' and I can't get out of the procedure.
Please help/
KathReset iPad and continue with update
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
My iPhone 4S had the iOS 6 update and I have been trying to download all day but it won't work and now when I go to software update of says iOS 5.1.1 is up to date. And I cant restore my iPhone becuase when I go onto iTunes it says that it can't find my iPhone. I have tryed to download the most resent iTunes because I went to apple website and just hit download iTunes so I guess it's the most resent version and I don't know what to do. Should I go to an apple store?
If your are using IOS 4, see below.
http://support.apple.com/kb/HT4972 -
I'm trying to update my iphone, but when I download the software update and then when it is "complete" a message pops up stating that it has been timed-outed and to try again later. This is the 5th time i've tried. And i am getting very annoyed. Can anyone help me?
Disable your firewall/security software and try again.
-
I updated to Yosemite and now I can't open my YNAB finance app. There is a question mark in the Dock where the App should be and when I hover over the question mark it does say YNAB but I can't open it. When I double click on the question mark nothing happens. Has the link to YNAB been broken with the update? Has this happened to anyone else?
Check the Application folder.
If it is not there, contact YNAB Finance for a OS X Yosemite compatible version of the application.
Best. -
Hi can anyone tell me how to find out what and when my last purchases were made from the App Store ? I think my kids used all my credit
.from iTunes, go to View > Show sidebar
From sidebar > Itunes Store > Click top left on your Apple ID email address > Account > ...scroll down > Purchase History > View All -
How can i get a free download, i tried but its impossible, now, and when i sign up on creative cloud for logging in, said now you are exit .
If you have exhausted your free trial period on your computer, even if you didn't actually get to try it, short of wiping and reinstalling your entire system from scratch you're not going to be able to extend the trial period. If there was a way, there would be people who would take advantage and just never subscribe.
-Noel
Maybe you are looking for
-
How to detect client OS from SQL*Plus script
Sometimes in a SQL*Plus script I need to execute OS commands e.g. host rm tempfile.bufHowever of course Windows has no "rm" command by default, so I have to edit the script to use host del tempfile.bufNow if I could define &DELETE (for example, "cat"
-
Issue with case when try to modify the siimple query
Hello PL/SQL Gurus/Experts, I am stuck with an issue (could be simple) but not gettings any headsway - select 365/day_num_yr Anul_Fact from Date where date_dt = trunc(sysdate -1) value returns is as - 1.46 need to write this in the form of case (as i
-
Email in inbox doesn't link to corresponding email message
starting yesterday, november 10, when i click on an email in my inbox sometimes it shows the correct email message and sometimes it shows a message from a long time ago. it is like the link from the inbox to the actual email is incorrect. has anyone
-
FI rule transport with user exit
I'm transporting FI substition rule, there are two selection checkbox: logical rules and boolean class, if I want to transport pre-requisite only, do I need to select logical rules only? what happens if I don't select? if I want to transport also use
-
Why does my iTunes stop working every time I plug my iPad in, but works for other apple devices
I have the lastest version of iTunes and the lastest version of the iOS sytem on my iPad 2. Every time I plug my iPad in and it comes up on iTunes, my iTunes stops responding and I have a never ending rainbow wheel. This is really frustrating and onl