Ios7 numbers input not shown

I have a numbers spreadsheet (built on IOS) that has an input form.
After the IOS7 update, when I enter data in the form and move to the next field, the input I type into the field does not show. Typing the input 'blind' and going to the next field makes the input show up.
Does anybody know of a solution short of returing to IOS6?
Does anybody else have the same problemem?
The same thing goes for the 'date entry helper "mini form"' when entering a date/time related field.

Seem that everyone has the same annoying problem.
This may be a bug that only Apple can fix. I will try to report it to:
http://www.apple.com/feedback
Hope they will fix it as soon as possible.

Similar Messages

6025e Analog Input not shown correctly

I use a 6025e on the Analog input channel 0 are 7 volt connected. The Testpanel show this Voltage but if i read this channel via AI_VRead(DAQ_Devicenumber,DAQ_force,1,&force)
i receive only 4.99 Voltage.
why ?
what should i do, to solve the problem

SuperWolfi,
If you look at the 6025E User Manual, in the Specifications Appendix A, you will see that for a gain setting of 1 you will have an input range of +/-5V. If you use a gain setting of 0.5 then your input range is expanded to +/- 10V.
In your call to AI_VRead you are using a gain of 1, instead of 0.5. For information on how to set the gain for your board, please reference Appendix B:
Analog Input Channel, Gain Settings, and Voltage Calculation of the NI-DAQ Function Reference Manual. You will find that -1 translates to a gain of 0.5.
6023E/6024E/6025E User Manual
http://digital.ni.com/manuals.nsf/websearch/0C88F40FFE7F28CD862569AE00574AC1?OpenDocument&node=1065_US
NI-DAQ Function Reference Manual for PC Compatibles
http://digi
tal.ni.com/manuals.nsf/websearch/1630A0B68738B269862567C1007A2912?OpenDocument&node=132100_US
Regards,
Justin Britten
Applications Engineer
National Instruments

File numbers not shown in Photos

When iPhoto displayed thumbnails the file number was always shown which was useful in selecting a specific image. The numbers are not shown in Photos. Can I change this?

When iPhoto displayed thumbnails the file number was always shown which was useful in selecting a specific image. The numbers are not shown in Photos. Can I change this?
Photos can display the titles of the photos below the thumbnails. But while iPhoto used the filenames with the file numbers as titles as a default title, if no title had been assigned, Photos does not do that. Filenames are only shown in the Info panel for a photo. You have to copy the filename to the title filed manually.
A posted an AppleScript to help with this task as a user tip, see this link: Photos for Mac: Batch Changing the Titles to the Filename
For a discussion on how to improve this script, see: Re: Re: Where are photo file names?

Why copy option from recent call numbers is not working on ios7 [recent call logs in phone]?

why copy option from recent call numbers is not working on ios7 [recent call logs in phone]?

Here is a copy of my expressions and a copy of my data. The expressions match up going from left to right
Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4"))
sum(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
count(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
PUBLIC SHARED FUNCTION CalcPTD2(LookupArray AS OBJECT) AS INTEGER
     DIM i,Total AS INTEGER
     Total = 0
     FOR i = 0 to UBOUND(LookupArray)
           Total = Total + CINT(LookupArray(i))
     NEXT i
NumberTimes =   NumberTimes +1
RETURN Total
END FUNCTION

Input and output varaiables are not shown

Hi,
I am using BICS connectivity to connect to a BeX query from Xcelsius. I am able to logon to SAP use datamanager conn and also able to select a query. But after that the query input and output variables are not shown. Instead all those fields are greyed out. I am not sure whether am missing any configuration. Please let me know if anyone have workaround for this issue.
Thanks,
Sivakami - SEMC SAP team

That is interesting. The first (AES) is producing a 128-bit key, the second (aes) is producing a 256-bit key.
Producing a 256-bit key should not be possibe without the JCE/JCA Unlimted strength policy files installed, I have those files, installed, do you?
If someone who doesn;t have ththe policy files installed tried it, what do they get?
I would suspect that the case-sensitive nature of the underlying JVM is causing it to choose a different Crypto Provider when you use aes than when you use AES. The JVM that ColdFusion ships with (and the standard JVM) have severa crypto providers to choose from, plus ColdFusion Enterprise and Developer addition also include the BSafe Crypto-J provider), I think there are 10-11 total.
I would log a bug for this.
FYI, you can control this by using the optional keylength argument in generateSecretKey()
These two statements will produde keys with the same length.
#arrayLen(binarydecode(generateSecretKey("AES", 128),"base64") )#
#arrayLen(binarydecode(generateSecretKey("aes", 128),"base64") )#

HT4191 I have iphone 5 and the latest iO7.1. Since upgrading to IOS7.1 birthdays added to a contact are not shown in calendar anymore. It use to show automatically before.

I have iphone 5 and the latest iO7.1. Since upgrading to IOS7.1 birthdays added to a contact are not shown in calendar anymore. It use to show automatically before. Can anyone help?

Click on calendars at the bottom of the screen. Make sure that birthdays are checked.
We may think we have 1 calendar, but iPhone puts things in different calendars. Sometimes we can somehow lose one. Well not really lost, but somehow it just gets de-selected. So just make sure that all that you want to see are checked.
One cool thing I like about this is that they have added US Holidays which didn't used to be there like on most paper calendars. Nice to have them available now!

Inspection Lot Created but not shown in QE72, and cannot input result or UD

Hi Exports,
I have Inspection Lot Created by 04-production goods receive, but not shown in QE72, and cannot input result or UD
Inspection Lot status: CRTD CHCR SPRQ,
in Business Process of inspection lot showing:
*Cancel inspection lot
Assign RMA proc. to insp. lot
Assign notification to lot RMA
Batch log indicator required
Certificate missing
Change inspection lot
Change planned lot quantity
Choose task list for insp. lot
Confirm Receipt of Certificate
Create part. lot for insp. lot
Flag cancellation
Inventory posting required
Lock
Lot for process documentation
Lot reset allowed
What is going wrong?
BTW, the sampling procedure in Inspection Plan is a read-only field, but empty inside.
Daniel

Dear in your case there is no Inspection plan was attached to the lot so attach the plan and make lot status to REL then only you can do Results Recording.
Inspection plan gets auto assigned to availble inspection plan on respective date if you enabled the inspction with tasklist and automatic assignment boxes in relevant inspection types in MM QM view for this Inspction plant should be made avaialble in stsyem before any lot created which can be created QP01.
If it is not getting assiged automatically then you can assign it manually by QA02 here go to inspection specification tab click on Task list assignment the go to sample tab and click on sample and SAVE Inspection plan will be attached to inspection plan.
Once inspection plan is the lot status you can see REL before assignment of a plant it would be CRTD.
Cheers
KK

OSA Appraisal: custom substatus not shown in phap_catalog_pa

Hi, gurus,
why there is only one substatus shown on the status flow tab of a category and template? i defined sever custom substatus of main status 'in process', but they are not shown at all.
thanks and best regards
Jun

Hi,
I recently worked the appraisal forms. Most of the appraisal templates are created and configured in the SPRO. Or OOAM or PHAP_BASIC transaction code.
as per my understanding , the solution for your question is : you can restrict Lines Reserved for Note is input field (F4 field) there you can select numbers within 1 - 9.
please let me know if you have any issues / concerns.
Thanks,
Ramana

ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
the Arial Font.
How can we correct this problem?
Regards
Udo
These are the files changed by Fontsolution Configuration Script:
uifont.ali
# uifont.ali provided in fontsolutions.tar for developer 9.0.2
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Revision: /main/22 $
# Copyright (c) Oracle Corporation 1994, 2002.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
"Sadvocra" = helvetica..Oblique.Medium
"sAdC128d" = helvetica..Plain.Medium
"CarolinaBar-B39-25F2" = helvetica...Bold
#"IDAutomationSMICR" = helvetica
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York" = times
#geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
# MICR font
#helvetica=IDAutomationSMICR
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
arial = Arial
"arial" =Arial
"arial narrow" = "Arial Narrow"
"courier new" = "Courier New"
tahoma = Tahoma
"microsoft sans serif" = "Microsoft Sans Serif"
"ms sans serif" = "MS Sans Serif"
"times new roman" = "Times New Roman"
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
helvetica..Oblique.Medium = "Sadvocra.ttf"
helvetica..Plain.Medium = "Sadc128d.ttf"
helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Embedding entry. Entries
# in Font Embedding will take precedence over the entries in Font Subsetting
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
uiprint.txt
# This is the printer configuration file.
# The format for entries in this file is:
# <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
# The first field is the name of the printer. It is the name you give
# to lpq.
# The second field is the type of driver to be used for the printer.
# Currently, "PostScript" and "ASCII" are the only types of driver for
# printers supported for now. But in future we may be supporting
# drivers for other printer types.
# The third field is the version of the type of printer driver. It's 1
# or 2 for all PostScript printers; or 1 for ASCII printers.
# The fourth field is a long description of the printer. This will be
# presented to the user in the "Choose Printer" dialog window.
# The fifth field is the printer description file to be used. For
# PostScript printers it is the PPD file of the printer. (This field is
# currently unused for ASCII printers.)
# You can use default.ppd for the description file if you don't have a
# PPD file for the printer, but it's best to use the correct PPD file
# for the printer.
# You must fill in at least the first two fields (printer name and
# type). If the version is empty, it defaults to "1"; if the long name
# or description are empty, they will default to empty strings. A
# version of 1 or an empty long name is fine, but, for PostScript
# printers, you must fill in the description file name.
# You don't have to update this file to use any printer. The printer
# chooser interface let's you select a printer and driver at run time,
# as well as associate a printer description file to the printer. You
# should list all printers accessible to users here, however, to
# simplify selecting a printer.
# The first entry in this file will be used as the default printer, if
# no printer was selected in the operating system. (For Unix, the
# following environment variables will be used in turn to get the
# default printer's name:
# TK2_PRINTER
# ORACLE_PRINTER
# PRINTER
# For other platforms, see the Installation and User's Guide for your OS
# for information on setting the default printer.)
# WARNING: Do not define multiple entries for the same printer by the
# same name. Selecting a printer with multiple entries will always result
# in the first entry being selected. Instead, see if your OS allows you
# to create an alias for the printer, and use an alias for the second type.
# The following are examples; replace them with printers accessible from
# this machine.
# hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
# hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
# hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
# hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
# hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
# --- Note that the following two printers are aliases for the same
# --- physical printer, with different names for different types:
# tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
# tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
# Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
datap462.ppd
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
OpenUI Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
CloseUI: Option1
*CloseGroup: InstallableOptions
UIConstraints: Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*% This datap462.ppd is provided by fontsolutions.tar
*DefaultFont: Courier
*Font ArialMT: Standard "(001.004)" Standard ROM
*Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font ArialNarrow: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
*Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
*Font CourierNewMT: Standard "(001.004)" Standard ROM
*Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Tahoma: Standard "(001.001)" Standard ROM
*Font Tahoma-Bold: Standard "(001.001)" Standard ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
count 1 gt
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
{exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
Pete

Page numbers are not generated correctly when print from Word to PDF

Whenever I print my Word document to PDF, my page numbers do not reflect the page numbers shown in Print Preview.
For example, I have a Word document with 10 pages and after generating it as PDF, the page number shows Page 1 of 1; Page 2 of 2; Page 3 of 3; ......Page 10 of 10.
Please advise what may be the cause and how can I rectify this problem?
Thank you.

Thank you for your reply.
I do have some sections breaks on the pages, however the pages are all shown in running sequence even on Preview page.
It is the final generated document that has this problem.
I emailed my colleagues my WORD document and ask them to generate to PDF and they have no issues printing the WORD to PDF and every pages were in running order.
Any other advise?

VA01 BDC Session - Purchase requisition wiew not shown

Hello Forum,
I've a problem with a BDC session in ECC 6.0 about VA01. When I try to change the purchasing requisition data from the shcedule tab using the button identified from the BDC with the code "EIBB" (the last one) the subsequent screen is not shown from the system. If I try to create manually a new sales order I'm able to view the screen.
I tried to remake the recording in 4.6C and the screen is shown correctly.
I'm in a mock conversion and in UAT but I wasn't able to find the problem.
Can you suggest something << Moderator message - Everyone's problem is important >>?
Many Thanks.
Regards.
Edited by: Rob Burbank on Oct 19, 2010 3:20 PM

Thanks Anyway, but with an additional search I've found the solution Here.
Batch input VA01 problem

All master data values not shown in query selections

Hi
I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
Then I deleted the contents of the InfoCube. It still shows the original 25 values.
The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
The problem is the same in LISTCUBE
I hope some of you can help we with this.
Thanks
/Karsten

Hi Hari
1) Reactivated the master data, said it was already active.
2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
Thanks for all the input guys.
/Karsten

JDeveloper 11.1.1.5.0 ADF Library task-flow not shown

fyi
Please consider the example application created using JDeveloper 11.1.1.5.0
at http://www.consideringred.com/files/oracle/2011/TestsInADFLibraryApp-v0.01.zip
(in the context of forum thread "JUnit test classes in ADF Library")
At some point, working with that application in JDeveloper 11.1.1.5.0, I used the deployment profile "adflibTestsInADFLibraryApp-ViewController-dp" to create the ADF Library "adflibTestsInADFLibraryApp-ViewController.jar" wich seemed to have an issue.
When in a File System Connection on the Resource Palette, that ADF Library did not show the task-flow(s) it contained.
But, I can no longer reproduce this. If I now try to do the same, the ADF Library seems to be OK. The only thing I can think of that changed, is that JDeveloper has been restarted (a day later).
Showing both ADF Libraries in File System Connections on the Resource Palette illustrates this
at http://www.consideringred.com/files/oracle/img/2011/task-flow-not-shown-jdev111150.png
When I looked inside the ADF Libraries, the respective "task-flow-registry.xml" files were somewhat different:
- in the "broken" ADF Library there were lots of XML namespace declarations
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<task-flow-registry xmlns="http://xmlns.oracle.com/adf/controller/rc">
<task-flow-descriptor xmlns:ns0="http://xmlns.oracle.com/adf/controller/rc" ns0:path="WEB-INF/btf/browse-employees-btf.xml" xmlns:ns1="http://xmlns.oracle.com/adf/controller/rc" ns1:id="browse-employees-btf" xmlns:ns2="http://xmlns.oracle.com/adf/controller/rc" ns2:type="task-flow-definition" xmlns:ns3="http://xmlns.oracle.com/adf/controller/rc" ns3:uses-page-fragments="true" xmlns:ns4="http://xmlns.oracle.com/adf/controller/rc" ns4:library-internal="false" xmlns:ns5="http://xmlns.oracle.com/adf/controller/rc" ns5:train="false"/>
<task-flow-descriptor xmlns:ns0="http://xmlns.oracle.com/adf/controller/rc" ns0:path="META-INF/adfc-config.xml" xmlns:ns1="http://xmlns.oracle.com/adf/controller/rc" ns1:id="" xmlns:ns2="http://xmlns.oracle.com/adf/controller/rc" ns2:type="" xmlns:ns3="http://xmlns.oracle.com/adf/controller/rc" ns3:uses-page-fragments="false" xmlns:ns4="http://xmlns.oracle.com/adf/controller/rc" ns4:library-internal="false" xmlns:ns5="http://xmlns.oracle.com/adf/controller/rc" ns5:train="false"/>
</task-flow-registry>- in the "ok" ADF Library there was only one XML namespace declaration
<?xml version = '1.0' encoding = 'UTF-8'?>
<task-flow-registry xmlns="http://xmlns.oracle.com/adf/controller/rc">
<task-flow-descriptor path="WEB-INF/btf/browse-employees-btf.xml" id="browse-employees-btf" type="task-flow-definition" uses-page-fragments="true" library-internal="false" train="false"/>
<task-flow-descriptor path="META-INF/adfc-config.xml" id="" type="" uses-page-fragments="false" library-internal="false" train="false"/>
</task-flow-registry>- (q1) How can these not shown task-flows (or its different task-flow-registry.xml file) be explained?
many thanks
Jan Vervecken

Thanks for your reply Chris.
Chris Muir wrote:
a) When you say you've "used the deployment profile" I'm guessing you mean within JDeveloper and not via ojdeploy? ...That is correct.
... it seems you're doing the ADF Library generation inside JDev, not via ojdeploy via Ant correct? ...That is correct.
... (For reference the bug numbers are 10028879, 10028816, 913159). ...On My Oracle Support I have found:
- bug 10028879, "OJDEPLOY FAILS TO COMPILE/GENERATE TASK-FLOW-REGISTRY.XML WHEN ${USER.DIR} USED" (having "Base Bug 10076058" which does not seem to be published)
- bug 10028816, "OJDEPLOY FAILS TO GENERATE TASK-FLOW-REGISTRY.XML FOR CASE-INSENSITIVE WIN PATH" (and a patch)
- for number 913159 I got "No results found" (which might be an unpublished bug, or a wrong number)
... by that stage I was sick of logging bugs against ojdeploy. ...Really, where did it hurt. ;-) ... logging bugs should not be a problem ...
b) Regards the File System Connection in the Resource Palette, are you using an UNC mapping? ...No UNC mapping, just the local file system.
... The relating bug numbers are 9340973 and 12940696. ...On My Oracle Support I have found:
- bug 9340973, "RESOURCE PALETTE FAILURE ON USING NETWORK PATHED FILE CONNECTIONS" (having "Base Bug 12940696" which does not seem to be published)
- for number 12940696 I got "No results found" (which might be an unpublished bug, or a wrong number)
So, about "I don't think these are related but let's rule them out", I think those are ruled out.
regards
Jan

My Apple USB Superdrive can't read CD, CD is un-ejectable (not shown in Finder). Any ideas?

After putting in a picture-CD nothing happened. Drive is running like normal, but the CD is not shown in the Finder-Menue. Therefor there is no eject-button or any possibility to throw the CD out.
Is there any (mechanical( possibility? Thanks for any inputs. :-)

See here:
http://osxdaily.com/2009/08/28/eject-a-stuck-disk-from-your-mac-dvd-super-drive/

LMS 4 Devices added but not shown in inventory

Hello,
By reruning discovery with new seeds etc I have more devices discovered.
Howeverr they are not shown in the inventory, only in the Device Discovery Summary however.
Any help, is welcome.

Hi,
Kindly go to Inventory> Job Browsers> Inventory Collection and create new job for all the devices. Kindly note down the numbers of devices selected for the job.It should show up all the 164devices there.
Thanks,
Gaganjeet
Inventory> Job Browsers> Inventory Collection

Ios7 numbers input not shown

Similar Messages

Maybe you are looking for