IOS8.0.2 is flipping through screens: black screen, login, cancel/slide .." Others?

Downloaded iOS8.0.2. Phone flipping through screens: black screen, login, cancel/turnoff. Can barely get anything done before it flips. Are others having this issue? Any thoughts? Its eating up my battery.

same my will not even switch on now to

Similar Messages

Upon updating 5.1 iphone 4 blacked out with white line through screen and nonstop vibrating

i was updating lastest version my iphone 4 through icloud until screen blacked out with white line in middle of screen and started vibrating non stop.
tried a hard and soft reboot NOTHING WORKED
phone died
put back on charger
same problem screen would brown out and fade to black.
now it won't turn on.
fed up #FIX

phone lost full charge upon charging again now i have colored lines running horizontal through screen then vertical.
hard restart does nothing again.
but its no longer vibrating.
seems like serious software issue.

A black see through screen slides down from the top of the Mac and tells me to switch off using power button. Nothing works other than just that. I run sophos up to date and use Safari. Everything is up to date. My Mac is a 21" and is three years old.

As per title. Twice in a few hours. Happened each time when my BT router defaulted to plain public wi-fi and while I waited for airport to locate my router hub I just ticked my hub and boom this dark almost black see through screen slid down and instructed me to switch off using power button. It is a 3 year old desktop 21" and has been faultless until this. I get the default report an unexpected shutdown form and when I fire up it is fine as indeed it is now.
Any help or ideas how to deal with?

That is a kernel panic.
What is a Kernel Panic?
http://support.apple.com/kb/TS3742
and http://support.apple.com/kb/TS1892?viewlocale=en_US
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
More details here:
http://www.thexlab.com/faqs/kernelpanics.html
Useful articles on how to avoid and eliminate kernel panics here:
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp

I have recently restored my phone to unlock it. I have installed the latest version of IOS. Since then, I have not been able to play the music I have purchased. The scrolls or flips through the songs and I am unable to listen to them. Can anyone help?

I have recently restored my phone to unlock it. I have installed the latest version of IOS. Since then, I have not been able to play the music I have purchased. The scrolls or flips through the songs and I am unable to listen to them. Can anyone help?

iTunes is quite friendly, and very powerful.... You probably just need to set up automatic syncing in iTunes.
If the iTunes sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The iPod appears in the sidebar, under DEVICES. Select the iPod there.
To the right, the iPod's Summary screen is shown. Toward the top, there is a bar of buttons, starting with Summary. Click on Music next to Summary. This Music screen is where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music. This setting enables automatic syncing for music. If your iTunes music library is small enough to fit on the iPod's storage, you can choose to sync Entire music library. Otherwise, you can choose to sync Select playlists, artists, albums, and genres. From the lists below, select (checkmark) what you want to sync to the iPod.
Here's one convenient way to set this up. In your iTunes library, create one or more playlists. Add the ALL the songs you want on the iPod to those playlists. OR, you can use existing playlists. Back on the iPod's Music screen, select those playlists under Playlists. (You can select other items on those lists, if desired.)
When you click Apply, the songs in your selection sync to the iPod. Going forward, to update your iPod (add/remove songs), just update those playlists in your iTunes library. The iPod does not need to be connected. The next time you connect the iPod (or click Sync if already connected), iTunes automatically updates the iPod with the same changes.
NOTE: On the bar of buttons that starts with Summary, click on the other buttons (such as Movies, Podcasts, Audiobooks, etc.) to set up syncing for those iTunes media categories.

Iphone 5c with iOS8 no longer plays music through cadillac cue

iphone 5c with iOS8 no longer plays music through cadillac cue

Thanks for the the reply Jeff.
Actually I misstated my initial question. The iPhone works fine through the bluetooth connection to Cadillac CUE but it does not function when tethered. If I use the voice command in the car to play music, CUE recognizes the request, loads the selection and then freezes. I can see the album cover on the screen and the player control loads but the music does not start. After a short period, CUE flashes UNKNOWN ALBUM, UNKNOWN ARTIST. it took a while for me to understand the complexities of the CUE and iPhone voice command interaction but just when I had it worked out, the update to iOS8 killed it again.
I seem to recall having a similar problem when the first version of iOS 8 came out. The first update solved the problem, but the latest update has created the problem again.
Any thoughts? Are others having this same difficulty?
Tim Huffman

Ios8 problem. ibooks individually open up ok black print on white, but the "page" shows as dark charcoal with indistinct pale lettering and I can't read it. Nowhere to fix the "page". It's crap. Please help

ios8 problem. ibooks individually open up ok black print on white, but the "page" shows as dark charcoal with indistinct pale lettering and I can't read it. My home page picture appears to "bleed" through. Nowhere to fix the "page". It's crap. Please help

I'd still prefer to keep separate user accounts. I never had any issues like this before. The only time I started having a problem was when I was just trying to force empty the trash a few months ago. I came on here looking for a solution and someone posted a way to empty the trash using the terminal. Before then, I hadn't used the terminal for anything--it was just another app in my utilities folder. (None of this has anything to do with having separate user accounts. Plenty of people with kids make second and third user accounts on their laptops so that multiple people can use one laptop, having more than one user on a laptop is not very difficult.) But thank you, I'll try that out and see if it works!

IProblems=Can't read from/write to and Flipping through songs

Yeah I'm getting the error "Can't read from or write to.", and the iPod itself will turn on, but when I put it on a playlist or album, it starts flipping through all the songs before it even gets a chance to play part of the songs. What gives?

Please do a Restore - which erase all the music on your iPod.
http://www.apple.com/support/ipod/five_rs/

Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?

My screen sharing functionality did not show up in the dock with an updated icon. It had a question mark- shows my connections but nothing works, I did make sure screen sharing is on and also connected to VPN. Once I tried to launch screen sharing nothing happens. Such an elegant solution in Mavericks not does not work. Ugh. Help!

This is the post that got me set up- I too am running an older version at work vs. Yosemite. As soon as I followed is advice everything worked.
Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?
I believe the location of the "Screen Sharing" app has changed, which explains why if you had it in the dock it has been replaced by a ?
Don't forget you can launch screen sharing (once your VPN connection is up) by typing in the Safari destination slot vnc://remotemachinename:portnumber (omit the :port number if you are using the default VNC port, 5900). This should launch Screen Sharing and put its icon in the dock. You can drag the Screen Sharing icon to the left of your dock and it will hopefully remain there after you exit Screen Sharing, or you can right-click on the icon when it's running and select Options->Show in Finder to find out its new location and drag its icon to the permanent entries in your dock.
Hope this helps; worked for me.

Display is not working But Through Screen Sharing I can Access my computer

Ok. After turning my computer off and then turning it back on a couple hours later the screen would not turn on. Im still able to log in. With screen Sharing I can acces my computer and system profiler shows that my RAM cards are OK. However when I click on Graphics/Display it unexpectedly quits.
What could the problem be? Any help is greatly appreciated : )
Ps. I wrote this through screen sharing out of my account on the display-less computer.

Welcome to Apple Discussions!
I wonder if you could have the NVIDIA chip problem?
http://support.apple.com/kb/TS2377
Is the display totally dead, or can you see your desktop if you shine a strong light through the apple on the back of the display? If so, you may have a different issue with just the internal display. A good test would be to see what happens with an external display connected directly to the MBP.
Good luck!

Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over

Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over.

Hi The next thing to do is to Restore back to Factory Settings this will get rid of any bugs . After Restore use same Apple ID /Password then you should get all your Apps & data back If you still have this problem make an Appointment at Apple Store . Cheers Brian

Photos in 9.2 do not appear when viewed through screen sharing

I recently upgraded my Mac Mini, which stores my master iPhoto library, to iPhoto 9.2. Because this Mac Mini is also used as a media server for an AppleTV, I almost always operate the computer through screen sharing using a MacBook Pro, rather than connecting it to a television. Both computers are running OS 10.6.8.
Since upgrading this setup to iPhoto 9.2, I can no longer view photos in my iPhoto library through screen sharing. Previously, I had noticed that I could not view certain other things through screen sharing (such as watching DVD's). For example, I couldn't view individual photos in detail in iPhoto, but I could view them in grid view. Now I cannot even view them in grid view anymore.
Is there a graphics library that is not compatible with screen sharing that is now being completely used by iPhoto? Is there a setting that I can check? Any help would be greatly appreciated.

Thanks, Michael.
I will give it a try.
Avox Systems Web Site: http://www.avoxsys.com
AVOX SYSTEMS
AIRCRAFT SYSTEMS
Rick Barusic
Senior Technical Writer
225 Erie Street - Lancaster, NY 14086 - USA
Tel: 716-686-1706
[email protected]
http://www.zodiacaerospace.com
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination, or other use of or
taking any action in reliance upon this information by persons or entities
other than the intended recipient is prohibited. If you received this in
error, please contact the sender and delete the material from any
computer.
From:   MichaelKazlow <[email protected]>
To:     rick barusic <[email protected]>
Date:   11/24/2010 10:32 PM
Subject:        Some CGM graphics do not appear when
FrameMakerfiles are converted to PDF
First you should update to the latest version of Acrobat 8, since you say
you are running Acrobat 8, you should update to 8.2.5. Update your
FrameMaker to 7.2p158. Those two steps might do the trick. If that fails
try using a different settings file. Perhaps High Quality or Press
Quality. I would never use Standard for anything where fidelity is
important.

Can I "delete" channels so I don't have to flip through them?

On Comcast I could delete certain channels from my line up - like all the news, religious and foreign-language stations. Verizon has 10x more of these channels and sometimes I just like to flip through the channels.
Is there a way to delete them so I never have to see them? I can't find an answer in the user guide.
Thanks!

NewFiosLover27 wrote:
I would like to know, if there is anyway I could delete the channels that are not in my AREA? No one at verizon could tell me that, not every area has the same available HD channels. I found out, by researching it online!
I would like to know, if there is anyway I could delete them or do the "favorite" list thing?
Like I said in my reply (above your post) - you can't delete anything from the guide (i.e.. Can't show only subscribed). The only method is to use favorites (although not reliable to hold your selections) and use "flip by favorites" and there is a guide option to display only favorites. The latter has a flaw in that the guide no longer wraps around (goes to the lowest channel from the highest channel or vice versa).
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

How to flip through multiple image files in a folder using Preview?

On windows a default image viewing program similar to preview allows a user to press the arrow keys to flip through images within the same folder as the image file originally opened with a Preview-like application.
How can a person filp through images in the same folder with a few keystrokes using Preview?
thanks

hmm...you mean there isn't a way to simply skim
through images in a folder using an arrow or page-up
key?? That's kind of disappointing...especially
being forced to pre-select images...
oceanbluesky,
There's no reason you can't use Preview to do what you're trying to do. And there's no need to pre-select images.
The trick is to open Preview first, and then choose Open from the File menu (or Command + O on the keyboard). When Preview's Open dialog window appears, navigate to the folder which contains your pictures. Highlight the entire folder and then press the Open button. Once the folder is open in Preview you should be able to use your arrow keys to flip through...
Note: To avoid a storm of images from opening on your desktop, go to Preview > Preferences > Images and make sure that the "Open each image in its own window" radio button is not selected.
Good luck!
Andrew99
iMac 1 GHz Flat Panel 15" PPC 768 MB RAM Mac OS X (10.4.10)

Exporting pdf shows all the .ai layers when flipping through pages

I'm building complicated illustrator files with vector and placed images and saving them as .ai files. Then I place then into my indesign file and export
into a multiple page PDF.
Unfortunately when I view the PDF, instead of just showing one flat image of the finished file, when I flip through pages it shows every layer until it finally loads. This is a very quick thing, but it is verydistracting when showing clients a pdf and they see every layer loading instead of just the flat file.
I would prefer not exporting the ai files into a jpeg first then placing into indesign in order the flatten. Is there an easier way?
Thanks!

I take it you save as an AI file with the PDF Content enabled. One way would be to save as a PDF with AI editing enabled and use the Acrobat 5 level in the save dialog which doesn't allow layers. This PDF can be placed in ID and still be edited in Illustrator but will not have layers if they are important.

Ipod flipping through songs

My ipod is going crazy...when I turn it on and pick a song or playlist it starts flipping through all of my songs or all of the songs on the playlist until it gets to the end and then goes back to the main menu...it will not let me play a song at all. I have tried hooking it up to my computer and charging it but that doesnt work. Any suggestions??

Try resetting it by first toggling the hold switch on and then off (orange not showing). Then press the Menu and center select button at the same time; pressing and holding them until the Apple logo comes up, then release them. Once the menu comes back try and play a song. If it doesn't work at first, try it again and this time with the iPod connected to a power source.

IOS8.0.2 is flipping through screens: black screen, login, cancel/slide .." Others?

Similar Messages

Maybe you are looking for