IOS8.1.1 freezes my system on install

I have an iPhone 5 has iOS8;1 and got a message that iOS8.1.1 update was available. Tried to install it. downloaded but when I go to install, it ask me to agree to the terms and conditions, I click agree, get a dialog box asking again, I agree, box disappears and install freezes systems with the terms and condition page. No instal no escape except to power off and restart.
How do you install this "fix"?

You can use iTunes on your computer:
Use iTunes to restore your iOS device to factory settings - Apple Support
How to erase your iOS device and then set it up as a new device or restore it from backups

Similar Messages

Glxinfo/glxgears freeze the system like hell

I am running the latest updated Archlinux 64 bit box:
[arnuld@gnu ~]$ pacman -Q mesa
mesa 7.0.1-1
[arnuld@gnu ~]$ pacman -Q xorg-server
xorg-server 1.4-5
I am using openchrome and X runs fine. NO freezes in normals runs but as soon as I type glxinfo or glxgears it freezes the system an I can not do anything. keyboard, mouse all stop responding as if my system is dead, the only solution is Manual Reset button on my cabinet.
[arnuld@gnu ~]$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01)
[arnuld@gnu ~]$ cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "glx"
Load "record"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30 - 70
VertRefresh 50 - 160
Option "DPMS"
DisplaySize 269 201 # 96 DPI @ 1024x768
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "PrintVGARegs" # [<bool>]
#Option "PrintTVRegs" # [<bool>]
#Option "I2CScan" # [<bool>]
#Option "VBEModes" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "ExaNoComposite" # [<bool>]
#Option "ExaScratchSize" # 
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoRAM" # 
#Option "ActiveDevice" # [<str>]
#Option "BusWidth" # [<str>]
#Option "Center" # [<bool>]
#Option "PanelSize" # [<str>]
#Option "ForcePanel" # [<bool>]
#Option "TVDotCrawl" # [<bool>]
#Option "TVDeflicker" # 
#Option "TVProgressive" # [<bool>]
#Option "TVType" # [<str>]
#Option "TVOutput" # [<str>]
#Option "DisableVQ" # [<bool>]
#Option "DisableIRQ" # [<bool>]
#Option "EnableAGPDMA" # [<bool>]
#Option "NoAGPFor2D" # [<bool>]
#Option "NoXVDMA" # [<bool>]
#Option "VbeSaveRestore" # [<bool>]
#Option "DisableXvBWCheck" # [<bool>]
#Option "MaxDRIMem" # 
#Option "AGPMem" # 
Identifier "Card0"
Driver "via"
VendorName "Unknown Vendor"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
[arnuld@gnu ~]$
I found one other thread with the same problem as mine but nobody replied to his 2nd question:
http://bbs.archlinux.org/viewtopic.php?id=39667
BTW, just out of curiosity , I only watch Bruce Lee's movies and do internet. I do not play games etc. So, is there any use of DRI for me ?

Welcome to the world of Unichrome. Via's integrated graphics chips open gl support in Linux is very poor. I have KM400 and I got GL working with it somehow. When libgl was updated to version 7.0.1 in extra-repo installing it broke the opengl on my system. X simply locked up when ever I tried to start any opengl software. I found from the openchrome.org:
"The 3D driver that complements the openchrome driver can be obtained from the DRI project. For now you should use the Mesa-6.4 branch; the last version known to work sort of reliably is Mesa-6.4.1."
I built libgl, unichrome-dri and mesa -packages with ABS from Mesa-6.4.1-branch and installed latest openchrome -driver from svn. Now opengl with my unichrome chip works pretty "stable". Of course it can't run the latest opengl -stuff but atleast I can run Blender with my laptop.

Dreamweaver keep freezing - I have problem installing the update for Dreamweaver cs5 -

Dreamweaver keep freezing - I have problem installing the update for Dreamweaver cs5

That is the perfect system for Dreamweaver.
The only thing that I can think of is to reinstall Dreamweaver. See Uninstall Creative Suite | CS5, CS5.5

Motion 2 freezing my system momentarily?!

Why does Motion freeze my system just for minutes at a time? No rainbow wheel just freezes all activity except the mouse movement. I know its Motion cause it only happens when its open. FRUSTRATING!
QUADCORE 2.5 G5 Mac OS X (10.4.5)

I know its Motion cause it only happens when its open. FRUSTRATING!< </div>
It's almost impossible to guess from where we're sitting.
If you're NOT getting a spinning cursor try opening Activity Monitor and see if you can get a feeling for anything that might be happening on the system. Try searching the forum for "slow down" or similar terms, we've had many threads over the months and they are all different. However, most are from folks who have a rainbow cursor.
Additional questions, did Motion ever work well? Did you install all of the resource data files?
bogiesan

Creative drivers give continuous static, freeze my system when sound plays

I've recently reinstalled Windows 7. Completely wiped my system partition and installed Windows 7 there from scratch. I am now having huge problems with audio.
First thing I would like to mention is that I had none of these problems on my previous installation. Audio worked perfectly, no problems with my sound card (except for no Stereo Mix).
Well, first thing I notice is audio doesn't work. Drivers are, of course, not present. So I install my trusty Daniel_k drivers for my Audigy SE using the setup.exe. First thing I notice - static. Not hardware related, because when the drivers weren't there I got complete silence. Next thing I notice is that as soon as I restart my computer, it locks up. Explorer.exe is dead (can't drag selection boxes on desktop, taskbar is not responding). The mouse then stops moving and I hear a continuous loop of the last half-second of audio that was played. Have to hard-reboot the PC.
I've isolated this issue to the Creative drivers. I uninstalled all the Creative programs (audio control panel, all that junk). System was a bit more stable, could drag selection boxes etc. now. But the static was still there. Went to the playback options and got to a button that said something like "only digital output". Checked it - static was gone. "Great", I thought. Played some music in foobar2000 - nothing. unchecked the box - music blasts loudly for one second and the whole PC freezes again with the infinite loop. After some more testing, it seems that when ANY sound plays, it freezes my system. Music, YouTube, even clicking "Test" in Playback Devices.
I've reformatted and reinstalled Windows 7 a few times to no avail. Problem is still present on each install. This is all after installing all the Windows 7 updates (SP is integrated into the OS), but I doubt this makes any difference.
The drivers from Windows Update have the same problem, as do the official Creative drivers from the site (creative.com). PAX drivers are broken too.
I've also tried ignoring the setup.exe and just installing the drivers themselves through Device Manager. Didn't help. Also disabled all the other audio devices and moved the soundcard to a different PCI slot. Also nothing.
At the moment I am connected to my onboard audio, no issues. This is not a solution for me, though, as I want to use my sound card, because sound quality on it is VASTLY superior. Anyone know something that might help? The most surprising thing is that the reformats didn't work.
My specs:

Sorry I am afraid I do not have any more suggestions. You might want to write to Customer Support for further assistance.

Iphoto gallery getting slow java script errors and freezing up system

Iphoto 08 freezing up system and causing slow java errors other users can't get pages to load fast enough, even with high speed connections anyone know what's going on???

Shawn:
I'm surprised you were able to even install it since the system requirements are 10.4.9 or later and Quicktime 7.2. If you were abel to install that may be the reason you're having problems.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

What is the best way to get iTunes running on my Windows 7 64 bit system without installing it on my Windows 7 64 bit system?

I had iTunes installed on XP before upgrading my system and with all the install and uninstall issues I don't want to go through the same thing with Windows 7.
So, I'm looking for a way to get iTunes running on my system without installing it (like maybe in a Virtual OS on VirtualBox or VMWare.)
Something that I can easily restore and/or repair (Windows 7 Restore Points/backup options are not viable because they restore EVERYTHING to the state they were in when they were created.)
TYIA
Any suggestions will help as to the best way of doing this.

LOL Yeah, right, that's very funny...
I did that on XP so I know better now!
Here is just 1 example of many:
On XP the uninstall wouldn't work so I coudn't upgrade iTunes. In order to fix this without Re-Installing XP, I had to delete iTunes and then manually remove it from the registry and from Add/Remove programs before I could Install the new version. Eventualy it did work after 1 and a half days of repairs...
I'm not going through the same type of problems on Windows 7 that just simply waste my time!

I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

Fix other system apps & installed apps in windows 8.1

I recently purchased an ASUS Transformer book notebook/tablet. It came with Win 8.1 installed so no installation disc.
All windows app unable to open and flash and back to startmenu
Then i tried
Powershell –ExecutionPolicy Unrestricted Add-AppxPackage –DisableDevelopmentMode –Register $Env:SystemRoot\WinStore\AppxManifest.xml
It able to access Win Store
but I cannot download anything due to error 0x80070002.
Also, i fix three other system apps such as PC Settings, run the following:
powershell -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\camera\AppxManifest.xml
powershell -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\FileManager\AppxManifest.xml
powershell -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\ImmersiveControlPanel\AppxManifest.xml
It works fine for carmera, file manager and immersive control panel
But all others app unable to open and flash and back to startmenu.
Any powershell command that can locate music, video, travel and fix all others win apps
Finally, i used AppsDiagnostic.diagcab to scan, it occurs
some other safety setting lost and changed and windows metro setting may be destroyed
Please help. I am a novice and do not know what to do and give powershell command to fix all other system and install apps
sdf

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

My Apple G5 using operating system 10.6.8 keeps locking up. I get no warning or error message. I do get some intermittent screen distortion. Any ideas as to what could be causing this and how i get rid of this problem? Complete system re - install? N

My mac keeps locking up it s Power mac G5 Intel using 10.6.8 OS.X. I get no warning or error messages it just locks up and the only way to get it to work again is to depress power button and restart. Its random intermittent and incredibly frustrating. I do get some screen distortion from time to time and wondered whether it may be a graphics card issue or whether it could be solved with a complete system re-install and OS upgrade?

According to everymac.com, your Mac came with Tiger, 10.4.x and can't go any higher than Lion, 10.7.x.
It would have come with gray, machine specific disks. Since there's no reason to install 10.4.x first, and then Snow Leopard over that, just purchase a retail copy of Snow Leopard for $20. What you won't get with the retail version of SL is the iLife suite (Garage Band, iDVD, etc.) that were on the original bundled disks, but you can purchase iLife on Amazon pretty cheap, and get newer versions besides.
When you get Snow Leopard, you can boot to the DVD, erase the drive and install everything clean. Hopefully, you issue is only software, and not hardware related.

HT3606 how do i get a recovery disk or download for os 10.5.8? my system was installed by an apple store when replacing my hard drive. i did not get a backup disk.

how do i get a recovery disk or download for os 10.5.8? my system was installed by an apple store when replacing my hard drive. i did not get a backup disk. macbook is a 1.1 from mid 2006 and 10.5.8 is as far as i can go.. use this as a utility backup when my new macbook pro with mt lion screws something up---which seems like a daily event. do i have to install a lesser version of leopard then install the update. does software update even work anymore for leopard? im so in the dark and when i look at the console i just freak.

Hello, your best bet would be to clone your drive to an external drive, which will be bootable.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
You're not likely to see any updates show up for 10.5.x
The very first MacBook 1,1s can actually run 10.6, which is updatable to 10.6.8, but will only run in 32 bit mode on yours.
http://www.everymac.com/systems/apple/macbook/specs/macbook_1.83.html
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57

ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)

Hi Experts I´m facing this issue.
This is tp version 340.16.41 (release 640)
HALT 20091029110915
ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)
ERROR: EXIT(16) -> process ID is: 9660
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0233
standard output from tp and from tools called by tp:
Any Clue?

Hi,
Was the system copied from another system? Or is this a new installation?
If yes, did you run SE06 after the installation?
What is the results of trans.log (generated from R3trans -d)?
Also paste the contents of table TADIR in SE16.
Best regards,
Warren

Bootcamp 'Glowing' windows logo freeze after gfx driver install

Bootcamp 'Glowing' windows logo freeze after gfx driver install
Last week suddenly, after having changed or installed nothing, trying to boot into windows resulted in a frozen glowy window logo 'Starting Windows', which resulted in having to format the windows partition.
Since then I've found out that I can do everything except install gfx drivers.
I've installed firefox, all bootcamp drivers except gfx, swtor (doesn't run of course, but installs fine), quicktime, rebooting is fine after all this...
But as soon as I install any kind of graphics driver and reboot, it freezes at the glowy window logo.
I have tried;
The bootcamp included gfx driver
Windows Update included gfx driver
Official nVidia latest beta driver
Official nVidia latest whql driver
Official nVidia oldest whql driver
nVidia Cuda driver, both versions
All give the same result
I have formatted the entire harddrive and written zeros and made the windows partition in a physically different location to make sure it's not a harddrive issue, no luck.
I have tried both Windows 7 x86 and x64 with matching drivers, same results.
Tried booting with no devices attached, no luck.
This all seems to me like a bust gfx card, were it not that under Lion everything works fine, even gaming (WoW).
Techtool Pro's test machine shows no errors.
My machine is a;
iMac
24-inch, Early 2008
Processor 3,06 GHz Intel Core 2 Duo
Geheugen 4 GB 800 MHz DDR2 SDRAM
Videokaart NVIDIA GeForce 8800 GS 512 MB
Software Mac OS X Lion 10.7.3 (11D50b)
Hardwareoverzicht:
Modelnaam: iMac
Modelaanduiding: iMac8,1
Processornaam: Intel Core 2 Duo
Processorsnelheid: 3,06 GHz
Aantal processors: 1
Totale aantal cores: 2
L2-cache: 6 MB
Geheugen: 4 GB
Bussnelheid: 1,07 GHz
Opstart-ROM-versie: IM81.00C1.B00
SMC-versie (systeem): 1.30f1

I am running Lion on a Mac Mini Server wherein I placed a Bootcamp partition and installed Windows 7 Ultimate. I've been testing Windows Media Center using a CableCard Tuner installed in a SiliconDust HomeRun box.
All was well until I received a Windows notification of an NVIDIA driver update. After the update, I now freeze at the same point that you do in the Windows startup splash screen.
I rolled back the driver using the Windows control panel associated with the device. Still freezes.
Windows repair does not have a fix. I can't get windows to start in "safe mode" so I can remove the additional apps that NVIDIA installed during the update.
I'm certain the freeze is associated with the NVIDIA driver.

Missing file system after installing in SSD

Missing file system after installing in SSD MacBook
Hi All
I recently installed a SSD drive in my Macbook, I used the Disk Utility to clone the old HDD.
When i reboot the machine with the new disk I get the image of a folder with question mark.
If i reboot the machine again and hold the alt key at the chime I can see two disks.
One called SSD and another called Recovery.
if i choose the SSD the OS starts as normal and if i choose the recovery option and check the disk with disk utility
it tells me that everything is fine.
Any ideas how i can make the machine boot as it should without having to hold down the alt key a start up??

Hi i tried this and just got the big symbol of doom at start up.
However, a little terminal witchcraft did the trick!
sudo bless -mount /Volumes/"Macintosh HD" -setBoot

Skype freezes my system completely

Hello. I have been struggling with this problem for a long time now. When I hit call on skype it instantly freezes my system. Im pretty sure it freezes the display driver alone becouse I listen to music while I talk on skype and when I discovered this problem when it freezed I could still hear the music in the background. The crash has phases. First it freezes skype then it freezes every other software (the cursor can still be moved but can not click on anything) and finaly it freezes the cursor. During this I can not do anything Im always forced to do a forced restart. Plz help !
Solved!
Go to Solution.

Please, run the DirectX diagnostics tool (32-bit option).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

IOS8.1.1 freezes my system on install

Similar Messages

Maybe you are looking for