Ios8 broke uconnect?!?!!?

Iphone5 using uconnect in Jeep since 2011 until ios8 upgrade.
Now it doesn't complete a call through uconnect system anymore.
(Tries to call, then beeps then drops) - the phone still rings out to the intended caller,
but nothing comes back through the speakers - if I grab the phone and look at it and switch to the phone speaker
(Dangerous as **** to do while driving) then I can continue the call... but the phone is dropped from the uconnect system.
My handsfree is broken!
Anyone else?
At least my wifes iphone5 is staying on ios 7 for now, and it still works in our Jeeps uconnect system.
But - Apple, fix this! I like ios8 and am torn between back-leveling to 7 or not..... but I need handsfree again!
I already tried --> restore to factory and followed by restore from backup.. and make both forget each other and
completely re-pair the 2 from new..--> no go..

Hello there, jennamassacre.
Since it seems the update cannot complete, you may want to try resetting your device:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If the issue persists, try restoring your phone again, using this article:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

IOS8 broke my Ipod Touch Generation 5.

iOS8 broke my Ipod Touch Generation 5. I finished the whole update part, but when I try to finish setting up my iCloud with my Apple ID and Password, it sends me all the way back to the Hello screen. Can anyone help me with this? I've tried logging in to my iCloud at least 100 times with the same result. Yes I'm putting my password in correctly. I've even turned it off and on again. Nothing is working.

Hello there, jennamassacre.
Since it seems the update cannot complete, you may want to try resetting your device:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If the issue persists, try restoring your phone again, using this article:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Has anyone solved the car integration problem with iOS8?

iOS8 broke my car radio's ability to control my iPhone to play music. I use USB, but many people in this community also suffered this over Bluetooth.
Resetting network settings, or installing an iOS update, will make it work once or twice (connecting to the car) but not more.
Has anyone figured out a permanent fix?
Does Apple acknowledge this bug?

Afraid start up is still rough. Even more button pressing required to access. Some apps still reluctant to open. Either slow or simply won't open.
THanks for your comments.

Blue screen crash constant loop

Apple has a serious issue that they are not addressing tech support said it was a hardware issue. If it is then ios8 broke millions of iphones. The person that answered my call said he had not heard of this issue. I said google blue screen iphone. He said yeah I see some threads. Apple needs to deal with this. It is a major problem and is costing me money when i cannot use square.

I Have done every sort of restart reboot possible. Sometimes it will even go into dfu mode while I am holding the home button. Sometimes in the reboot loop it will comeback on. Sometimes it won't unless I am holding a button it is all very random. For Apple to tell me it is a hardware issue is ridiculous. Especially when google shows loads of people with the same issue.

Ios8 update broke messaging in iphone 5

The i0s8 update broke imessaging in my iphone 5s. Asks if I want to send as SMS instead. Nice QA, Apple.

I had the same problem with iOS8 and the iPhone5. I was not getting any messages being sent to me via iMessage.
I only noticed this because the iMessage app on the Mac had new messages that the iPhone did not.
When I went to the iPhone Messages settings and tried to log in to iMessage via my apple ID and PW the phone kept saying the PW is not correct which was not true since I am using that same ID and PW to post this message.
I turned the iPhone off and then back on, went back into the Messages settings and iMessage indicated I was logged and and now is working however the earlier messages only delivered to the mac app don't show up on the phone.

HTML5 Audio CSS broken in iOS8 UIwebview

I am using the HTML5 <audio> tag in UIwebview in a number of Apps.
The style of the audio bar and the controls is preset by Apple and that's fine, but I could use CSS to give the audio tag the desired width.
Up to iOS7, this worked nicely (e.g. "audio {width:100%;}" would stretch the audio element to full width, including the progress bar).
In iOS8, Apple obviously broke the CSS Support, so I cannot resize the audio bar in any way.
Can I hope that this will be restored in an iOS update soon?
Or are there any other possibilities to change the size of HTML5 audio elements?

Volume Control in Firefox 11+
This is an problem that has cropped up recently. Some of you may have noticed that the volume controls have disappeared from the audio player in Firefox 11+. True, you can mute it, and the volume controls are still controllable via the keyboard’s up and down keys, but the volume slider itself was removed due to two bugs. I assume this will return in the future, but for now, in case you were wondering what happened to them, it’s not your fault. (You can, of course, use the Media API to build your own set of custom controls.)

Images in mail are not shown after ios8 update

After update iOS8 the images attached in mails are not shown constantly, I configured my iPhone and iPad to show the images in mails but it is not working all time.
The issue is with photos sent from my ip cameras, these are showing for one mail and for other not.
Thanks in advance.

Actually yes!
I'm not familiar with fuse, but I found the action in line one of your third frame (on the main timeline) dubious, and a quick search lead me to try "portfolio._brightness = 0;" as first line (and I commented out the original line) that worked.
My quess is that whatever template or original file you've been modifing/adjusting used some kind of color-fade in at that point, and you somehow broke it.
To me it looks ok without it, but you let me know if you need further guesswork from me.
cheers
M

Ios7, ios8 wifi problem with Linksys WAP54G

I have 4 apple wireless devices (iPad mini, iPad 2, iPhone 4, iPhone5) in my house.     I have about 8 other wireless devices (non-apple).   I have a Linksys WAP54G wireless access point (on the latest software 3.08.06).
Everything worked just dandy until I upgraded to iOS7.   At that point, all apple wireless devices did the same thing: After a random amount of idle time, picking them back up again, they'd be disconnected from the network.   They all claimed they were connected to the wireless network, had an actual valid IP address from the WAP, but would not access the network.   Just spins.    Only solution is to deactivate wireless on the device, and re-activate.   Now works fine until the next random time it drops it again.
I figured this would be fixed in iOS8. No luck.
All other devices of different types (windows 8 lenovo laptops, Roku boxes, Tivo boxes, Nest thermostat, etc...) ALL have always connected just fine to the wireless network, and the Apple devices USED TO until iOS7.
Clearly they broke something in iOS7, and it is still broken in iOS8.
I realize this is an old WAP, but come on.
anyone else have this issue?    Apple, what did you break and why can't you fix it?
thanks
tom

I am in the UK and have one of the fastest fibre optic broadband on the market but have the same issue with my iPad air since downloading ios8. I can no longer watch Netflix and pages close, or just go incredibly slow. Apple are you going to get this fixed. My iPad drops outs of my broadband connection and buffers constantly yet I have no problem with other devices.
thanks
SImone

From IOS 7 to IOS8

i broke my iphone 5s. it has the IOS 7.1.2. and my last backup is with this version. i will buy a new iphone. i mean i phone6. i would love to know if i can restore my last backup without any problem. (from IOS 7.1.2 to IOS8).
thanks

There should be no problem restoring from a backup that uses an older system. iOS8 will still be maintained when you restore.

IOS8 music control through usb in car (Jeep & Volvo)

after updating both mine and my wife's iPhone5's and to iOS8 our in car controls started working intermittently for actually starting, skipping, pausing, etc.. playback of our iPhones both in my 2011 Volvo S40 and her 2014 Jeep Cherokee (through USB connection, which previously worked with no issue).
we then upgraded our phones to iPhone6's and same issue (after updating to one the next small iOS8 updates the issue was slightly less intermittently, but still sporadic and very unreliable; 8.1.3 update made no difference).
control works perfectly through bluetooth streaming in her Jeep, however.
I assume there were changes made to the music playback control (trickplay) mapping in iOS8, is there a ticket out to fix this or is the issue even know?
Are others having the same issue?

I went here: https://rsur.extra.chrysler.com/rsur/Uconnect.do
You have to have a flash drive to install the image to and plug the USB into your Jeep. Haven't tried that yet but will tonight.

Iphone 6 - UConnect - Bluetooth connectivity with Jeep

Upgraded to the iphone 6.
Re-paired it with my Jeep Sahara using "UConnect".
When you dial a phone call through UConnect, it dials the number, then plays a tone, and disconnects.
This seems to be a common problem as it is reported on the Jeep Forum:
http://www.jeepgarage.org/f50/iphone-6-ios8-uconnect-2010-wk-79606.html
Apple? Is there any fix? Workaround?

I found this in another forum:
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN, and APN settings.
Once this is done - then delete the pairing from your iphone and then pair your phone to your car again.
Going to try this first thing tomorrow.

Error Level 10: I have this error where a plugin broke that I had to remove because it was not finding it. How do i install it back so it functions?

8/29/2014 7:15am
It seems to me that if Microsoft's platform can not fix it with the troubleshooter that the troubleshooter sucks. It does not know when errors are thrown so your developer sucks on creating software for errors that are popping up in your software?
if a error is thrown in Windows 8 it should catch it upon a thrown error in programming? This hsould be a level 1 ticket. Since when I call you support for error in your product no one wants to address problems in your software and get mea tech to resolve
it?
The question now is how do I fix this and why is it causing me an internal error 500 for my web server install?
I may have other issues but I need access to my web server through my browser I used fsocketopen to troubleshoot it?
It gets back a internal 500 on Gecko process in firefox and on IE it just won't serve out the document in my web server abyss or apache? So the question is what service is broken so I can't serve my [web server] pages out? Let me go through all the event
logs that I have with errors below?
Under Applications:
1) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 10
2) LMS Service cannot connect to Intel(R) MEI driver. Error level 1
3) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 3
4) SearchIndexer (3476) Windows: The database engine attached a database (1, C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb). (Time=0 seconds)
5) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.125, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000, [11] 0.000, [12] 0.000.
Saved Cache: 1 0: Evenet Id level 326.
6) SearchIndexer (3476) Windows: The database engine started a new instance (0). (Time=0 seconds)
7) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000. eveent level 105
8) SearchIndexer (3476) Windows: The database engine (6.03.9600.0000) is starting a new instance (0). Error Level 102
Under Security:
1) We might want to check this out here User Account Management changed?
Under Setup: no errors.
Under System below:
1) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.Event level 1014
2) Intel(R) 82567LM-3 Gigabit Network Connection
Network link is disconnected.
3) The system has returned from a low power state.
Sleep Time: ‎2014‎-‎08‎-‎29T05:10:07.602701000Z
Wake Time: ‎2014‎-‎08‎-‎29T13:13:47.945773100Z
Wake Source: Device -USB Root Hub : Error level 1
4) The browser has forced an election on network \Device\NetBT_Tcpip_{58565081-3013-43B6-AE07-CC89C71F6036} because a master browser was stopped. Event Id 8033.
5) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Event error 219.
6) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{3c83e4cf-28e9-11e4-827b-b8ac6f8aec21}#0000000000004000. Error Level Id 219.
7) The UMDF reflector was unable to complete startup because the WUDFPf service was not found. This service may be started later during boot, at which point Windows will attempt to start the device again. Error Id 10114.
8) Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. The data field contains the error number. Event Id 15005.
9) The supersafer64 service failed to start due to the following error:
The system cannot find the file specified. Event ID 7000.
10) The SNMP Service encountered an error while accessing the registry key SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfiguration. Error: 1500.
11) The SAS Core Service service failed to start due to the following error:
The system cannot find the file specified. 7000
12 The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/ for site 1. The site has been disabled. The data field contains the error number. 1004
13) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Error level 219
14) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded. Error level 1014.
Now I need help with all these error since Windows 8 with maybe 15 applications is failing after no setup errors? What would cause these we need to find out? Since I can not use your product with so many developer errors? and to put out a products that doesn
work is pointless? So please call me and have some help me through the errors and tell your support to stop ignoring the errors that broke the products?
Sincerely, William Dunlap {removed} N. Academy blvd, 201, Colorado Springs, CO 80910 http:\\interfacesone.fnhost.org
{removed}. I need a tech to help me get my web server up?

So now you don't release the security breaches in windows 8. You mean to tell me that you can use Powershell - Using WMI to breach security in VB apps on the web by getting my file structures?
What is this all about?
1 Set VPN NIC Settings
    2 Get Network Data from servers
Set VPN NIC Settings
$error.clear | out-null
cls
$ErrorActionPreference = "SilentlyContinue"
if ( $Args.Count -ne 1 ) { "
Not enough arguments
Usage :
   script.ps1 server
"; exit }
$server = $Args[0].ToLower()
"We are working with $server"
$netAdapt = get-wmiobject -class Win32_NetworkAdapter -computer $server
if (!($netAdapt)) {
   "Failed to connect to the target server!"
   exit(5)
foreach ($card in $netAdapt) {
   IF (!([string]::IsNullOrEmpty($card.NetConnectionID))) {
       if ($card.NetConnectionID.CompareTo("VPN Virtual NIC") -eq 0) {
           $myID = $card.DeviceID
$NAC = [wmi]"\\$server\root\cimv2:Win32_NetworkAdapterConfiguration.index='$myid'"
$guid=$NAC.settingID
"Setting DNS Toggles"
$dnsToggle = $NAC.SetDynamicDNSRegistration(0,0)
if ($dnsToggle) {
       "Success"
   } else {
       "Failure"
$strShowNicKeyName = "SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}\$guid\connection"
#$strShowNicKeyName
$reg = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey('LocalMachine', $server)
$regKey= $reg.OpenSubKey("$strShowNicKeyName",$true)
$showIcon = $regKey.GetValue("ShowIcon")
if (!($showIcon -eq 1)) {
   "The icon is hidden.. Setting it now"
   $setIcon = $regKey.SetValue('ShowIcon',1,'DWORD')
   } else {
   "The icon is visible already."
"Script Ends"
Get Network Data from servers
$myfile = get-content servers.txt
echo "Server   IPs   Subnet   GW" | out-file "Results.txt" -Append
foreach ($server in $myfile) {
   Write-Host "Looking at $server"
   $colitems = Get-WmiObject win32_NetworkAdapterConfiguration -computer "$server" -Filter 'IPEnabled = "True"' | select ipaddress,ipsubnet,index,defaultipgateway
   foreach($objItem in $colItems) {
   Write-Host ""
   $myip = $objItem.IPAddress -join " "
   $mySubnet = $objItem.IPSubnet
   $myGW = $objItem.DefaultIPGateway
   $temp = $objItem.index
   $myid = Get-WmiObject win32_NetworkAdapter -computer "$server" -Filter "index = $temp" | select netconnectionid
   $myid = $myid -replace "@{netconnectionid=",""
   $myid = $myid -Replace "}",""
   echo "$server   $myip   $mySubnet   $myGW   $myid"
   echo "$server   $myip   $mySubnet   $myGW   $myid" | out-file "Results.txt" -Append
Is this possible on any machine with power shell and if so how is access done?
William Dunlap

Office 2013 latest update broke new profile creation on all network computers

Hi,
Reporting a bug here!
Setup details:
We're using samba 3 as our backend and all workstation are Windows 7 Pro x64.
Office 2013 Home and Business Retail (en-us) Click 2 Run version
Context:
Deployed to the whole network of one of our client using the Office Deployement Tool.
We update their base update (no updates) to the latest update 15.0.4569.1508
Everything was working alright after initial Office 2013 installation with no updates. After updating the all the PCs to the latest version as of 31/03/2014, the user profile creation broke for newly created user.
Symptoms and causes:
Trying to log on as a new user on the machine would give the following error on Logon before automatically loging off because it cannot copy the following file to the new user profile:
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_00.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_02.sqm
The Bici folder has Read and Execute permissions for everyone but the _XX.sqm files inside only have permissions (Full Control) for SYSTEM and Administrators and LOCAL SERVICE with the all permissions EXCEPT:
- FULL CONTROL
- TRAVERSE FOLDERS/EXECUTE FILES
- CHANGE PERMISSIONS
- TAKE OWNERSHIP
Solution:
I gave "everyone" Read and Execute permission on those files and the new user could log in and his profile got created alright.
The files with broken permissions time stamp shows they've been modified during the Office 2013 update and Bici seems to be a OneDrive related service. This bug should get fixed ASAP.
Event log error:
Windows cannot copy file \\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm to location \\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-User Profiles General" Guid="{DB00DFB6-29F9-4A9C-9B3B-1F4F9E7D9770}" />
<EventID>1509</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-04T07:15:51.922563800Z" />
<EventRecordID>9615</EventRecordID>
<Correlation />
<Execution ProcessID="940" ThreadID="1764" />
<Channel>Application</Channel>
<Computer>F00241D1DAAAD</Computer>
<Security UserID="S-1-5-21-1582357797-4105456612-768596941-1206" />
</System>
- <EventData Name="EVENT_COPYERROR">
<Data Name="Source">\\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Target">\\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Error">Access is denied.</Data>
</EventData>
</Event>

Hi dude,
I appreciate that your sharing your experience and solution here. And, I would report it through our internal channel. Thanks again.
Tony Chen
TechNet Community Support

I've had three laptops all connected to my itunes account, one was stolen, the other broke, how can I remove them from my itunes account?

So, in three years, after getting an iphone and an apple account I've had to replace a laptop twice due to theft or damage. When I link my phone to my new computer, it asks me if I want to connect the computer with the phone and I say yes, but you can only have 5 devices connected to one account, since one was stolen, and the other laptop broke, how do I remove them from my account??

De-authorise all, then authorise the one you still have.

List View in ios8 on iPhone only shows 1 year

List view in ios8 on iPhone only shows 1 year. Earlier events are there, and you can see them in other views, but not in List View. Any ideas?

OK, I solved it. Here is the solution if you have precisely the problem I had.
1. On the iOS device: delete the iCloud account.
2. Go to the Apple ID website and make sure the ONLY email there is the me.com email and that it is set as primary. If you Mac.com email is listed as a secondary email THIS will cause the problem. So delete the Mac.com email.
3. Log back in to iCloud on the iOS device.
Only you wanted to use the Mac.com address and not the me.com one, you could follow the above instructions just swapping me and Mac.

Ios8 broke uconnect?!?!!?

Similar Messages

Maybe you are looking for