Ios8 can not connect to wifi at all

Worked first 3 days (bad)
Tried to do a factory reset throug iTunes
Came to the point "You must shut down Find my iPhone"
How can You do that with no wifi

Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

Similar Messages

  • Iphone 4s can not connect to wifi

    I have an iphone 4s can not connected to wifi even it was working the day before problem.

    Power off your phone, unplug the router and modem for 2-3 minutes, then plug them back in, power your phone on, and try to reconnect.

  • IPhone can not connect to wifi

    Since I downloaded IOS 7 to my iphone 4S, my battery life is greatly diminished and I can not connect to wifi. I reset my systems, but still the wifi button is grayed out. Suggestions ?

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • I can not connect to wifi using iphone 4s

    I can not connect to wifi using iphone 4s

    If this is you home wifi try resetting the router.  Turn if off at the wall wait a minute and turn it back on.  Are you sure you have the right password?

  • After updating to 10.8.1 i can not connect to wifi   no hardware installed , it says

    When I installed the update to 10.8.1 there comes a message that there was a problem by installing.
    Now i can not connect to a wifi network, when i click on the wifi at the bottom
    No hardware is installed
    Why is there no hardware installed?
    Under 10.7 all was fine

    I have MacBook unibody late 2008 with OS X Mountain Lion on board. Wifi stopped working suddenly and I spent about four terrible hours to solve a problem.
    Actually, none of mentioned and googled advices helped me out to solve this issue with 'WiFi: No Hardware installed'.
    Except one thing: using the wifi kext from the Snow Leopard. You may use utility and kext from here: http://rys.sommefeldt.com/2011/09/04/osx-lion-wifi.html
    I hope, this can help.

  • I downloaded Lion OSX and at the end I received a notice that Safari can not connect to Server. All internet connections work including Safari on other user on same computer. I downloaded 13items and installed only 12. What do I do now ?

    I dowloaded Lion OSX and installed. I downloaded 13 iitems and installed only 12. At the end of the insta;;ation I received a notice thst Safart can not connect to Server. Safari does not work on user where installation was made. It work on other user. All internet connections work including google. If I go into Safari the blue line goes up to end of "http" on adress and freezes. Where do I go from here.:::???

    Hi There Linc Davis,
    Wow, you are the best.
    Yip this is what the website looks like. Great job Linc Davis.
    Not surprised that the "Shop" tab is missing. Darn.
    Well can you try to access it's "sister" website: astralmusic.com and astralmusicshop.com?
    Since you are awesome with the "Flash" can you investigate if this website has a issue withis this "Flash" too?
    Please Linc Davis

  • I can not connect to wifi with router WRT54G2 v1 with Windows 7

    Hi everyone: I have a Linksys WRT54G2 V1 and since I bought my new notebook with Windows 7 I can not access the wifi.
     I have another notebooks with Windows Vista and a PC with Windows XP that connect perfectly, but with Windows 7 gives me error when loading the password.
    I Update the firmware to version 1.0.04 (this the latest version I found on the cisco site), but still don't work.
    I Try chatting with Cisco support and was told he was no longer under warranty ....
    Can you tell me how to solve this problem ???
    Thank you for your help !!!
    Solved!
    Go to Solution.

    Sure, disable security on the router completely for now.  Now try to connect with no security.  Once done and verified  go back and add  security back on of WPA2-AES with a new password and try again.

  • Can not connect to WiFi on iMac... just started

    I have a preferred network t hat all of a sudden I can not connect to on my iMac. The network diagnostics does not even bring up the list of networks. I have 2 other laptops, an iPod touch and another iMac on the network using wi-fi and they are all fine. If Network Diagnostics does not work...how do I troubleshoot?

    I would turn Airport off and then turn it back on. You should see your network and be able to log back in. There's also been a number of OS X updates - you might want to get your system up to date as there have been multiple Airport updates.
    The other thing you might want to try is resetting (power-cycling) your router.

  • Can not connect to wifi to configure

    I can not connect to home wifi to configure. 

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Restored Ipod will not connect to Wifi but all the other devices in my house do.

    I restored one day to factory setting cause i wanted to delete all my junk and so when i got home it would not connect to wifi. Before I restored the wifi my ipod worked fine but now i cann't connect. Please help me I have tried everything and am getting really frustrated.

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Can not connect to wifi-network

    I have a iphone 4 that I managed to lose in the toilet. it is relatively in good condition,but can not connect to wi-fi networks. seems as if it is unable to receive signals. is there anything I can do to fix it?
    and I have no dial tone when I call. what can I do?

    Apple has an out of warranty replacement program for phone's like yours, cost in the US is $199. That would be your best course of action.

  • Can not connect to WiFI with IPAD.  Any tips?

    Any tips on how to connect to WiFi.  The IPAD does not find WiFI.  I know that is working as I currently have 3 other devices using currently.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can not connect to Wifi (2.4 WPA2)

    Hi team,
    My iphone 5s (IOS 7.0.4) has problem to connect to the WIFI in my office (2.4 WPA2 - corporta use router, setting could not change), before I go to China local apple store, I have tested other apple devices, including iphone5, iphone4s and iphone4, all of them can easily connect to this WIFI. And my iphone5s network setting has been reset for more than three times.
    The WIFI issue is not replicated as I dont have any issue to connect to other public/private network. The genius tests my iphone5s and confirms that no issue is found, so he suggests that, I should choose "other" and put WIFI details. However, it does not work at all.
    Could anyone help?
    Thanks,
    Luhouse

    Update - resolved our connectivity issue. Turns out it was a MAC address filtering problem on the Airport network.
    Some months ago we tried enabling MAC address filtering on our network, i.e. where you add the MAC address of each device on your network into a list on the Airport and set what access it has. I'm pretty sure we then decided it was unnecessary and left in the default option which is that unknown devices are allowed unlimited access once they connect. I know that I logged a visiting consultant into our network last week and they had no problem, even though I hadn't put their MAC address into the list.
    Today, 3 devices couldn't connect. After a full day of troubleshooting, turning off MAC address access control immediately solved the problem. Now we haven't made any changes to our network configuration in the last 24 hours, nor any changes to the devices that started having problems. So I think, but I can't prove it obviously, that Apple pushed a silent update that changed that default option from 'unlimited access' to 'no access'.
    Luhouse - this might not be your problem at all, probably isn't, but leaving this here in case it helps someone else.

  • Can not connect printer HP photosmart all in one 6510 with my windows 7 home edition PC

    Stuck!  Please help.  I'vre uninstalled and reinstalled several times: restore PC to previous working time; checked all passwords and IP addresses.  Do wireless connection (home group) network - says it can't connect up by wireless, evenb though it says printer is connected up to internet as is PC.  USB connection it jams on the drawing of the ethernet connection.  PC does not accept updates-they all fail.  Last week I had no such problems.  Rolfus
    This question was solved.
    View Solution.

    Hi Rolfus,
    Welcome to the HP Forums!
    I understand that your HP Photosmart 6510 will not print with your Windows 7 PC.
    I would suggest going through this guide. Printer Does Not Maintain Wireless Connection.
    Hope this helps, and have a good day.
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • My printer can not connect to WiFi if there are two or more APs with same SSID

    I tried to connect my printer to WiFi but failed.
    My network has more than 2 WiFi APs and all the APs have the same SSID and security settings.
    I found that the printer can connect to WiFi only if I left one AP on and turn all other APs off.
    Other devices like notebooks, smartphones all works fine with these APs.
    Any solution to solve this problem?

    No, I gave you a solution to try, you rejected it. BTW using channel 3, it is getting clobbered by all APs on channel 1 and channel 6. If you use channel 1, you only have other APs on channel 1 to contend with. That's why you should only use channels 1, 6 or 11 on the 2.4GHz band.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

Maybe you are looking for