IOS8 does not work on car stereo USB

Hi guys,
Has anyone encountered this issue after updating to IOS8 from 7, my USB function in my car recognizes my iphone as an ipod and plays directly without having to use Bluetooth.
Ever since I just updated there seems to be connecting but never connected as an ipod and thus I only can use Bluetooth to play my music.
While is not END of the world, is a bit disappointing.
And yes, I am using original cables and it was working the day before? I don't expect car manufactures to suddenly cater for IOS changes as they probably met the specifications to begin with and thus it was working on IOS 7.
Any thoughts? Or suck in and hopefully Apple gets an update to fix this?
Is there a place where I can give feedback to their team? I know is not scream and shout at them but rather, "Could you have a look at this?"

Hi,
I have a Kia cee'd and I'm experiencing the same issue.
Before updating to iOS8, connecting the iphone to the car USB I was able to get it properly recognized. For example, music playing was working fine and GPS Navigator also.
It was hearable through the car audio system. After the update to iOS 8 (and iOS 8.1), once I connect the iphone to the car USB it is not possible to get the device recognized. The car stereo display prompts a message "no file".
Quite strange and for sure disappointing.
ciao!

Similar Messages

Bluetooth on iPhone 6 does not work with car stereo

I have used iPhone 4, 4S, 5 and 5S on my car - my own and my families phones. They all work as intended with regard to music and most importantly telephony. My car (FORD S-MAX) has buttons etc. for phone navigation. My daughters and wifes 5S's still work.
When I paired my new iPhone 6, the pairing itself was successful, but it does not work at all.
1) Incoming calls show my own telephone number, regardless of who calls
2) I cannot use the car buttons for anything, neither pickup, hangup or anything else
3) Regardless of what I do, the Podcast starts playing, if I choose Bluetooth as sound input on car. If I click pause on Podcast, it resumes after a while, sometimes immediately.
4) If I use the phone to dial a number, the sound is not in the car, even if sound source is Bluetooth/Car. If I select something else and back to car, the sound is in the car.
Hopefully this is soon to be solved! Or is there already a solution out there?
Best regards
Matt, Denmark

My iPhone 6 pairs just fine with my 07 Z4 ,no idrive etc just the basic B/T install on a Business standard radio set up with e snap in connector for the iPhone
but not yet an iPhone 6 snap in
You may need to ensure you clear all ol pairings from Beemer they have a limited number of pairings that can be stored at one time
To dispel all the bad press my 6 also happily paired with my '13 X1 without any issues and with the correct snap in also plays audio
The issue is usually with iDrive which BMW do have some issues with

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

IPhone does not work in car after upgrading to os5

After upgrading to os5 my build in hands free device does not work properly anymore, lot of noise, disconnects, connects in general not usable anymore.
How to fix this?

Does your aftermarket solution connect to the Nano's headphone jack or to the dock connector?
If it connects to the headphone jack I would suggest buying an iPhone headphone adapter. I'm expecting mine to arrive via FedEx tomorrow so that I can use my iPhone in the car with a cassette adapter.
Hope this helps.

BB Curve 8310 Home Charger Does not work, but Car charger charges Phone.

Help !!! Home charger does not charge phone. But Car charger does. But Home charger works with another curve.
What can be wrong with the phone?

Oddly, it could be the device USB going bad.
Can you connect your Curve to your USB > PC and see the Curve connected in Desktop Manager?
If so, do a complete back up of the device -- just in case it is the USB port ON the device going bad. It happens.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Bluetooth will not work with car stereo after IOS6

I upgraded to ios6 and lost a number of Bluetooth functions with Alpine car stereo 1. Can no longer control playback from head unit. 2. Track info no longer displayed on head unit. 3. When head unit finds iPhone it no longer begins to play automatically.

If this is an after market car radio, you can go to the manufacures website, and they should have an update available for your head unit. Some manufactures dont have it available and you may need to replace and update your head unit. If this is factory installed, go to your local dealership, and they can do the update for you.

IPhone 3G does not work with car integration after 2.2 update

I just upgraded my iPhone 3G with the new 2.2 software update and now it doesn't work with my car integration. Very frustrating... I have a 2009 Honda Civic that has a USB interface. Before the update I was able to charge and play music through the USB interface. In addition, I could also control the music through the stereo. After the update, it says not compatible and it doesn't even charge the phone anymore. Doesn't anyone have the same problem or know how to fix it? Street view is cool but i will definitely revert back to 2.1 if I can't fix this...

I am having the same problem here After updating to 2.2 the iPhone has stopped working in the car. The stereo just simply refuses to see it. The car in question is a brand new 2009 VW Polo Match, which I know is not as fault as tried it with a iPod nano and worked fine.
Is reinstalling the firmware only solution to this? Do we know the cause yet?

USB ethernet does not work in left USB port

My USB ethernet adapter does not work in the left USB port on my MacBook Air, but it works in the right side. Other devices, like my mouse, work fine in both ports.
Could I have a faulty left-side port with too little power for the ethernet adapter, or is this normal for MacBook Air?

I have the same problem.
USB Ethernet doesn't work with the left USB port. It does work with the right USB port, and any other USB device works with the left USB port on my macbook air
Any solution to this problem?

Audi Bluetooth does NOT Work After Update 8.02 and neither my car charger

aAfter Update iOS 8.02 Bluetooth. Audi does NOT Work - Connection is ok bit cant talk with Connection
and also The car charter does NOT work

Hi Lars - I had the same issue - found the help on audi-sport.net - link:
http://www.audi-sport.net/xf/threads/iphone-6-not-functioning-correctly-when-con nect-to-mmi.227675/
see page 2 of the postings under veeeight's suggestion (7 steps). Pasted from the forum.
1. Rename your new iPhone
2. Delete all Bluetooth phone pairings from the Audi MMI
3. Reset All Settings
4. Reset Network Settings
5. Reset Network Settings again
6. Connect to WiFi on your phone (optional)
7. Do the pairing with the car again.
I was able to resolve this on my 2011 A4 with MMI. That's after I have updated my iPhone 6 with 8.0.2
Hope this helps you and anyone else having the same issues.

My Garageband does not work with Symphonic Orechestra or USB Boombox

I have two Macs: the main one is an iMac with Intel Core Duo 2 GHz, 1.5 GB RAm and 250 Gb HD, with OSX 10.4.8, and all the latest software upgrades as I download them as soon as they are available. The secondary Mac is a normal iBook G4-800 with 640 Mb RAM and not always the most recent plugins, but since a few days also the latest ones.
I premit I do use GarageBand to produce professional level music and in time I bought several new music features. I am a Mac user since ever and I never (I say again NEVER) uploaded any software (or loop) who wasn't regularly licenced and usually bought from Applestore itself.
NOW THE PROBLEM:
Since I sold my old iMac G5 and implemented my CoreDuo I experienced a problem with Garageband: the external plugins for Garageband (such as the old and excellent "East West Quantum Lightning Symphonic Orchestra" but also the very recent USB "Classic Boombox" and "Ethnic Boombox" are not working. Those software instruments does appear correctly in the menus, but does not work. When I try to select them it appear this sentence (in italian, I will try to translate it approximateively):
"the plugin is not available. To add this loop using the same sound you heard in the browser loop, press the Option key and drag contemporary the loop in a new track"
This it happens all the times I try to set an instrument from EastWest or USB plugins from my iMac. As to make a confrontation, I installed the same softwares on my iBook and they work perfectly (with the only exception that I can't work from the iBook since is far too slow for me to use it with some profit).
Someone an help me or explain if there is anything I can do to fix my problem?
East West said the pluging should work (and to be honest it works correctly on the G4 as it did work properly with the G5). I own the USB software just since a few days, so I didn't ask them yet, but since is not just them, I guess is something else and do not know what may be the cause.
Some of you do have some hint or idea?

Yep, I understand...
This is the final news I needed to get to complete my answer... I confronted myself the italian store and the US one and in the US one I didn't find this product...
As for the NI software, was so good that I just bought back my good "old" iMac G5 and will exchange it with this my Intel Mac. The G5 2 Ghz was good, performing as this new Intel (at times I even got the impression was more performing, but I believe is just an impression) and surely didn't have so many 3rd parties problems.
Meanwhile I filled every forum of NI and USB with my questions about the compatibility... and maybe I will be back to an Intel Mac when all would be OK, I'm not in a hurry!
By the way I had a listen to your work: GREAT!
You may hear a sketch version of something we did work on with the NI piano and choir sounds, while the alto sax is played live and the other instruments are from Apple or real keys (yes, we mix a lot of things):
http://www.garageband.com/song?
while here is a track where we did use both the Orchestral sounds of Garageband (and some of it's loops, mixed with some good old programming) together with some NI sound:
http://www.garageband.com/song?
We do not often use orchestra if not as here and there (other than in some work as this last one, but is not so frequent). Hope you may like our little works!

One USB port does not work with external Disk or USB key

Hello,
Back to my iMAC there is 3 USB port. The second one - in the middle - does not work pluging an external Disk, an USB key or an iPOD nano. However it works well connecting a Wacom tablet.
Is there an explanation to this behaviour ?
More the keyboard is plugded on USB port 1 and the mouse on the keyboard. Time to time - especially at reboot - I have to unplugged the mouse and plugged again it in order it works.
In advance thank you for your answers
Regards

Since it does not work for three different devices, I will assume it is not something simple like a faulty USB cable. Since it does work for one device, I will also assume that the port is (at least partially) working.
As a test to narrow down the cause, I would try restarting from your Mac OS X installation disc (insert disc and restart with the C key held down).
At the first Installer screen (after language selection), go up the menu bar. Under Utilities, select to run Disk Utility. Now, connect the USB drive into that center port. Does it appear in the Disk Utility sidebar?
Please post back the result...

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

External USB keyboard does not work with T60 after BIOS upgrade

External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
t

Hi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

945gcm5 usb 2 does not work

Hello
I also have the same problem and did the same things that are mentioned here in another post, with no success.
I laso have the latest bios update and all the drivers are up to date.
It simply does not recognize USB2.0...
Any sugestions?

hiii
the exacts symptoms is that, does not work the USB2.0. And inte device manager it only appears:
"Controlador Amnfitrião Intel(R) 82801G (ICH7 Family) USB Universal 27C8
27C9
27CA
27CB
I've tried so many OS's, Win XP SP3; Windows Vista; Seven (several versions) Linux Ubuntu, and the same thing:
"this device could be faster" but there are any ports....."
Sugestion, buy another board?

Bluetooth USB Dongle does not work

I have this generic looking USB dongle (forgot the brand) that I use with my eMachines e725 laptop. It worked fine with Linux Mint 9 KDE 64bit that I had to use for the past 1.5 years. The moment I plugged the dongle in, it was instantly detected and the bluetooth icon turned active in the system tray. However it does not work with my ArchLinux 64bit install with KDE4.6 (updated to latest packages). Due to issues with the new Kernel 2.6.39 series, I am using the LTS kernel.
lsusb:
Bus 003 Device 009: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
tail -f /var/log/messages.log
Jul 10 17:56:26 localhost kernel: [11565.480026] usb 3-1: new full speed USB device using uhci_hcd and address 9
Jul 10 17:56:26 localhost kernel: [11565.728190] usb 3-1: configuration #1 chosen from 1 choice
I've installed bluez and bluedevil. In KDE System Settings, when I go to the bluetooth options, it says no bluetooth adapters have been found.
Last edited by MetalheadGautham (2011-07-10 13:28:51)

Have you read the Bluetooth wiki page?
Seems to me you didn't run the relevant daemon.
Also, your thread title should include 'bluetooth' - 'USB dongle' on its own is too generic.
Last edited by tomk (2011-07-10 13:12:28)

IOS8 does not work on car stereo USB

Similar Messages

Maybe you are looking for