Ios8  ipad sometimes goes into airplane mode

My ipad 2 with 3G capability has taken to dropping into airplane mode without any instruction from me. No obvious pattern.
Have also experienced on some occasions, again no obvious pattern, a message telling me that no wireless network cover was available when I was in an area of excellent phone coverage and my ipad is set to use phone coverage by default if no wireless coverage is available. The display did not indicate any phone coverage however and disabling wireless coverage changed nothing.

Thanks for the input, you are possibly correct. I had not considered that possibility - my reservation is that it has happened on 3 occasions since changing over to ios8 and never prior to that that I can recall. Time will tell. Thanks again.

Similar Messages

  • My iPad 2 goes into restore mode almost dailyand can't restore it anymore error 1603

    My iPad 2 goes into restore mode almost daily. I usually just restore and sometimes use the iCloud backup. This time, my iPad cannot restore. I have gotten the error message 1603. I have the latest version of iTunes. PLEASE HELP ME

    Hello Sean,
    It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
    iPhone Repair - Other Repairs
    https://www.apple.com/support/iphone/repair/other/
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • My iPad randomly goes into sleep mode while I am using it?

    All of a sudden, when ever I use my iPad 2 it goes into sleep mode. It did it three times while I typed this message.  As I am running an app it will just go into sleep mode with out me doing so and I have to press the home button to wake it up. Doesn't matter what app I am running. I have 4gb of storage available.  Most of the time it brings me back to the app I was using when it went to sleep.  Has anyone else suffered this issue. I am running the latest iOS 6.0. 

    What "issue"? This is perfectly normal. By default, all (fairly-recent) Apple products will go to sleep if left idle for a certain period of time. This is NOT normal, however, if in the app, you are pressing buttons on the screen. If you are doing something like reading, for example, try setting your iPad to not go to sleep that quickly.
    (Google how, I don't completely remember.)

  • Why does CC start verification process every time I open it? It even starts asking for license key and sometimes goes into trial mode.

    When ever I open Adobe CC it starts verification process and asks for Serial No. And then goes into trial mode. I have to open it several times for it to run in proper licensed mode.

    Sign in, activation, or connection errors | CC, CS6, CS5.5
    Mylenium

  • IPad 3 goes into recovery mode after every update

    I purchased an iPad 3 in September 2012. When I installed iOS7, the iPad went into recovery mode and had to be restored to factory settings. Yesterday, I tried installing iOS 7.0.3 and it did the same thing, and I had to restore it from a backup (which I was smart enough to make before installing this update). Before installing iOS 7.0.3, I was having problems with the iPad randomly going to the black apple screen for a few seconds and then returning to normal. Any idea what is going on? Do I have a v

    I had this problem with my wife's iPad when I updated to 7.0.3 via OTA. It was easily fixed for me, and I assume it should work for everyone else.
    It appears that sometimes during installation of the OTA update to 7.0.3, it gets stuck in recovery half way through.
    You can connect it to iTunes and restore it, which will wipe it, OR you can download TinyUmbrella and kick it out of recovery. Once you do that, the installer should complete normally (it did for me).
    1) Download and install TinyUmbrella for your PC/Mac.
    2) Make sure iTunes isn't running and connect your device via USB.
    3) Open up TinyUmbrella. Your device should show up on the left. Click on it and then choose "exit recovery".
    4) Profit.

  • WiFi turns off, too , when going into Airplane Mode

    Hi all,
    not sure if this was the case before OS4 but I have noticed that when connected to Wifi and then switching to air-plane mode , Wifi will turn off as well but works again after turning it back on. (Air-plane mode will also stay turned on)
    Is this a bug or normal behaviour?
    Thanks

    That is how it has always been (well not always, original you couldn't have Wifi and Airplane at same time).
    Process is always turn on Airplane, then you have to manually turn back on WiFi.

  • Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

    I am Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.  I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream).  When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD.  All device are on current releases of software.  I have no Video hooked up to the Apple TV.  How do I correct this?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • IPad goes into recovery mode every time I power up

    Is this normal?  What could be wrong?

    It is by no means normal. When you say that it goes into recovery mode, do you mean that you have to restore the iPad every time that you turn it on?

  • IPhone 3G goes into Recovery Mode after every restore

    Every time I restore my iPhone 3G, it goes into recovery mode right after an error-less restore has been completed. Yes, I've tried using tools such as TinyUmbrella and RecBoot and iRecovery. The device was not jailbroken when I tried to update it to 4.2.1 yesterday. They all reboot the phone and just throw it back into recovery. I have no idea what to do. Searching is futile. I thought I might as well do what I almost never do and ask these communities for support.
    I hope they don't disappoint.

    I had this problem with my wife's iPad when I updated to 7.0.3 via OTA. It was easily fixed for me, and I assume it should work for everyone else.
    It appears that sometimes during installation of the OTA update to 7.0.3, it gets stuck in recovery half way through.
    You can connect it to iTunes and restore it, which will wipe it, OR you can download TinyUmbrella and kick it out of recovery. Once you do that, the installer should complete normally (it did for me).
    1) Download and install TinyUmbrella for your PC/Mac.
    2) Make sure iTunes isn't running and connect your device via USB.
    3) Open up TinyUmbrella. Your device should show up on the left. Click on it and then choose "exit recovery".
    4) Profit.

  • HT201317 Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they a

    Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they appear OK

    Hi AP_In_Surbiton,
    I am really sorry that you have had so much trouble getting your Caller ID up and going.  I'll be happy to help you out with this and get it working for you.
    Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • IPhone 3gs wont turn back on once it goes into sleep mode!

    2 days ago my iPhone 3gs (OS 6.0.1) has gone completely wacko on me and i'm completely frustrated!   I have my phone set to have the screen shut off after 5 minutes.  Usually, to just reaccess the phone I just simply hit the home button.  Now, if I let it go into sleep mode, the phone WILL NOT come back on!  I went online and did some research, and it suggested holding the home button and the sleep button for 10 seconds to get it to come back on.  It works most times, but sometimes it takes a few tries to get it to come back on, and when it does come back on it takes forever to load up.  But the whole thing happens all over again when it goes into sleep mode.  My phone is fine as long as I set it to never go into sleep mode, but it is killing my battery.  I need to be able to put it into sleep mode as I have to be able to go all day without charging it at my job.  PLEASE help...I don't know what's going on with it.  I have never done anything to it (jailbreaking, illegal stuff, etc.) and I do all the updates that it asks to do.
    Please please help!
    Jennifer.

    If you actually see a "6" error code, here's what it means.  Disable your anti-virus and/or firewall.
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • Late 2012 Mac mini with OSX 10.8.2 has started shutting down instead of going into sleep mode.

    Sometime in the last week or so my mac mini has started going into full shut down instead of sleep mode.
    I have tried checking and unchecking energy saver boxes but haven't found anything which will get me back to where I used to be - and I haven't knowingly changed anything to make this happen.- maybe an OS update caused it?
    The machine will fire up with a tablet click rather than needing the reset button to be pushed so clearly the machine is sort of halfway between sleep and full 'off'. Most frustrating as one of the key issues for me in getting this my first mac was its easy sleep and super quick fire up compared to windows.
    Any help appreciated
    Oh yes  I just remembered that I did just install 2 8gb of crucial RAM (to replace the supplied 2 2gb but surely that can't have anything to do with it - can it)?

    Adding to my first post I can now advise that when the mac goes into sleep mode the light on the front stays on (it does not pulse so clearly it is not really sleeping).
    When i click the tablet / keyboard this is actually what triggers the mac to reboot
    I have tried resetting the SMC as per the following link to no avail
    http://macs.about.com/od/usingyourmac/qt/Resetting-The-Smc-System-Management-Con troller-On-Your-Mac.htm
    Help please!

  • Macbook spontaneously goes into sleep mode and screen off mode

    Hi. My Macbook spontaneously goes into sleep mode and screen off mode with varying time between each instance. It usually goes for a few minutes or even hours without doing it and then will go through periods of fluctuation between the modes. I believe this to have started with a minor orange juice accident rather than it being anything software related.
    Any ideas as to how I might rectify the problem? Thanks very much in advance,
    Danny

    When you say it goes into sleep mode ...do you mean you actually see the white pulsing light?
    It may be that there is an application running (perhaps in the background) that is keeping your book awake. Printer software sometimes does this for example ...try logging out and seeing if it sleeps like that. If it does, then it very well may be a background process running.
    You may find some items in System Preferences/Accounts/Login Items that may be the culprit.

  • Mac Pro randomly goes into sleep mode

    My (mid 2010) Mac Pro, OS X.6.8, randomly goes into sleep mode and I can't wake it, have to power it off and reboot. Just started to the best of my knowledge Friday (Jan 6, 2012) I've had it happen surfing the web in Safari, while working on an illustration in Adobe Illustrator, while running Apple Hardware Test, using 23" LCD connected by HDMI and DVI-D, Disconnected monitor and connected 12" Cintiq (LCD Tablet).
    The monitor goes black, says "there's no signal coming from your computer", none of the keys will wake it. I have to hold down the power button until it turns off then power it back up. The time between the sleeps varies, 38min, 1hr 34min, 5min, 2hr 17min, 12min, etc. I disconnected everything (except keyboard, mouse, monitor) still the same. Opened and removed the ATI Radeon HD 5870, and noticed the PRAM battery, replaced it with a new one, thought that fixed it, worked for a long time then it happened again.
    Tried Apple Hardware Tester again, it said everything is fine, ran it again an error popped up: 4SNS/1/40000000:Te1S-99.364, wrote it down then it slept.

    The next time this happens open your mac and see if there is still a fan running.  If so you are not sleeping, you are in a thermal cutoff.  Keep you mac cover off.
    Now reboot as you always do.  Take a look at the fan in your 5870.  Is it spinning?  If so, try to keep an eye on it and see if you can "catch" it not spinning. 
    When the fan doesn't start, or if it does then stops, the card will overheat and the machine will go into thermal cutoff.  The amount of time is variable.
    I speak from experience.  I am currently on my third 5870 video card.  Both the previous two had this fan problem.  The only wrinkle in my theory for you is that I wouldn't expect more that, say, 15 minutes of up time at the most, not hours like you got.  But it may be that your card is starting ok, but stops sometime later.   I chalk it up to the lousy fans Nvidia uses in the 5x70 cards.
    FWIW, if you happen to catch the fan stopped before the machine goes into thermal cutoff you can give it a little nudge with your finger to get it going again.
    I recommend one of the various temperature monitors.  I use iStat Menus and display some key temps in my menu bar.  Of course after going through two of these cards I am a bit paranoid!
    Some other temperature monitors:
    iStat Pro
    Temperature Monitor
    Hardware Monitor
    Note, after typing all this I also realized you got a AHT 4SNS error. I would run AHT again to see if you get that error again.  If so that means "Check Main Logic Board" and you may have a more serious hardware problem than just a video card!  So my other recommendation is that when you machine fails again look inside for any lit diagnostic leds.  There's some near the dimms but there are others on the board as well.

  • Unexpectedly goes into Sleep Mode... All the time!

    I've had this Powerbook for about 2 years now, and I've got some problems. About every 5 or 10 minutes, it goes into sleep mode! It acts as if I close the screen, so I wake it up by pressing the spacebar. But sometimes... pressing the space bar doesn't wake it up, not even holding the power button turns it off! I have to remove the battery to restart it! Can someone help please?
    By the way, I checked "Power Save" settings in System Prefs and everything seems to be correct.

    If you have issues with a Mac or display that goes to sleep at inappropriate times, you may have a problem with Energy Saver. Delete the following .plist files and restart:
    -/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    -/Users/username/Library/Preferences/com.apple.systemuiserver.plist--
    (username is your name or System Administrators name)
    -/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
    A restart is very important after deleting these plists. After a reboot your Mac will then generate new ones.
    Some, in these forums, have had luck fixing sleep issues downloading the Combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
    Yours would be the 10.4.7 Combo update. Others reading, download the combo update that applies to you!
    Cheers!
    DALE

Maybe you are looking for

  • Issue in FPCOPARA of FI .. please help

    Hello all I am working as ABAP developer , on 4.6C system. We have developed a Print work bench form (PWB) through tcode EFRM , and we use it in FPCOPARA . In the END EXIT in PWB form , i m inserting a single record in Z table. Now, (1) When i run th

  • Partial payment of customer for TDS

    Hi, We have a customer from whom the payment will be recieved in the next financial year.But we have received the TDS certificate from him & therefore need to pass an entry for TDS in this financial year as it needs to be paid this year.Please explai

  • Installing MDM 2.00 with EP 6.0 and XI 3.0

    Hi everyone, looking for people, which have successfully applied an installation with EP6 and XI3. I'm currently try to solve installation problems with the CI (Content Integrator). Message was edited by: Sven Wetzel

  • Arrears to be paid in installments

    Hi Experts, 1) When I am changing DA % from back date the arrears amount should come as arrears in payslip, how this is possible as the basic wagetype's amount is not changing. 2) Suppose DA has increased from 40 % to 50 % from backdate. This arrears

  • Assign access control,http 404 error

    Hi, when i right click on assign access control,i receive the following error: The page cannot be found The page you are looking for might have been removed, had its name changed, or is temporarily unavailable. Please try the following: If you typed