Ios8 is causing all my tv's to scramble with bars

very wierd.
Got ios8 on my ipad and iphone last night. This morning i was watching TV in the kitchen and the tv just scrammbled and mad an awful noise. both iphone and ipad were in the kitchen.
this evening, i had just my ipad upstars watching a different tv with the kids and the same happened???? all the time.
i was on safari, doing normal stuff.
This is definatley something to do with ios8 as never had anthing like this before. something to do with wifi/BT??
Both tv's do have magic eye on to control Sky TV but not tried disconnecting yet to see if thats it.
anyone seen the same?

1) Please read all of OP's original post before replying.
I can see this thread going south fast…

Similar Messages

What is causing all of my Images to import with a blue cast?

All of my images are now importing into Lightroom3 and Photoshop CS5 with a blue cast. I have reformatted the SD card, tried with other SD cards, re-calibrated my monitor with X-Rite colorometer, changed monitors, tried with another camera, changed card readers. The images appear as shot in Bridge, but when opened they come in with the blue cast. The same images import properly on my laptop. I'm shooting sRGB in camera and have tried a number of different shots, so artificail lighting is not the issue. All images that are already on my hard drive import properly. I was working in LR when this occurred, so, I think I must have inadvertently mades some alteration to the settings while working in LR. However, opening PS separately and bringing an image in independent of Lightroom has the same result. Images appear as shot in Adobe Bridge, then open with the blue cast. Thanks for any assistance.
Reconman1033

Curt Y:
Thanks. In camera I still shoot DNG and I shoot nothing but RAW. Is there something in LR and/or PS that I have done to make that change, and if so, how would I correct that. I feel pretty sure it is something I did while importing into LR on my desktop, since I can open the images on the Laptop without any trouble.

I updated my iPhone 5c to iOS8 and lost all my calendar events. How can I get them back?

I updated my IPhone 5C to iOS8 and lost all my calendar events. How can I get them back? I had it saved to the cloud but then changed it because I did not want to save everything to the cloud. I changed it back and still don't have any events.

Are they still listed on your device when you go to Settings>iCloud>Storage>Numbers? If so, they should still be in iCloud but you may need to contact support to find out why the Numbers app isn't able to access them: http://www.apple.com/support/icloud/contact/.

I have, by mistake, caused all my photos in a large book I am making to revert to the original. This after a long time spent editing etc. I don't understand how iPhoto library works. I have aTime Machine. I also have an EHD backed up 2 days ago.

Yosemite 10.10.3
i am making a photo book with iPhoto, had already started it when Photos superseded iPhoto so I carried on. Have spent a lot of time on it, it's a large book.
BY mistake I caused all the photos to revert to original.
I have Time Machine and I backed up Photolibrary to EHD 2 days ago.
BUt it I don't understand iPhotos library. If I replace existing library from Time Machine, all my projects, albums etc. be there as they were before my BIG mistake?
I have read that Time Machine is not suitable for back ups of iPhoto so should I try to use my EHD? In finder it just shows 'iPhotoLibrary'. So the same question arises - does the Library incorporate all my projects and the work I've done on them up to the date of back up?
I would be so grateful for help and advice

See my response to your duplicate post.

I have never updated ios on my iPhone 4. I am currently running ios 4. I tried to update yesterday to ios 6 but many hours into the backup I got an error message saying that continuing would cause all of my phone contents to be lost. What should I do?

I have never updated ios on my iPhone 4. I am currently running ios 4. I tried to update yesterday to ios 6 but many hours into the backup I got an error message saying that continuing would cause all of my phone contents to be lost. What should I do?

Why, if it told you you have insufficient space on your computer, would it suggest making more space available on your phone?
At a guess, you have insufficient space on your phone. Installing software will typically require more space than the final size of the software, perhaps even twice or three times as much, for the installation process. You can easily dump some videos or music temporarily, and then synch them back in afterwards.

Changing filename causes all finder windows to close

changing a filename causes all open finder windows to close and desktop icons to briefly disappear. This problem just started. Anybody have this problem?
Thanks, Tim.

I rarely use Stuffit and just knew about the issue from remembering reading about it a week ago. I'd check Stuffit's site for news about a newer version.

How does 1 ASM instance in a 10 node RAC cause all 10 ASM instance to hang

Linux RHEL4
11.2.0.1.0 GI
11.2.0.1.0 RDBMS
11.1.0.7.0 RDBMS
10.2.0.4.4 RDBMS
Yesterday we had one of the ASM instance on our 10-node cluster hang with a latch "ASM file allocation latch". Oracle support has stated we are hitting a bug with is fixed in the latest PSU.
What I am trying to understand is how a latch on one ASM instance caused all 10 ASM instances to hang?
Oracle Supports explanation still does not answer how all 10 ASM instance were affected other then the faulty code that the patch fixes. Bellow is info out of the SAR.
Data Guard Site:
================
ARC1 PID 21508 reports ORA-240 'control file enqueue held for more than 120 seconds' at Thu Oct 28 11:35:54 2010. This message means ARC1 PID 21508 was holding the enqueue past the maximum tine limit of 120 seconds.
Next ARC0 PID 17398 reports ORA-16146: 'control file enqueue unavailable' at Thu Oct 28 11:36:52 2010. This means ARC0 PID 17398 tried to access the controlfile and it could get the lock.
ARC1 PID 21508 is then killed at Thu Oct 28 11:49:57 2010.
Killing enqueue blocker (pid=21508) on resource CF-00000000-00000000 by (pid=23078) by killing session 5.3
We see that RSM has been restarted by Broker. This matches to the alert.log and messages showing RSM being restarted several time. i.e. RSM0 started with pid=84, OS id=27915
Since this started happening around 11:14, the problem may have really started then instead of w/ the CF enqueue block.
The primary appears to be shipping redo to the standby using asynchronous mode. Unless there was a gap, I do no know if ARC1 should have been doing any remote network I/O. Because a log switch to thread 1 sequence 5235 had just happened at 11:33am, I suspect it was a local disk I/O that was started at least. The ORA-240 is reported at 11:35, exactly 120 sec (or 2min) from this log switch. Notice also the entry to show the log thread 1 sequence 5234 was registered to the controlfile didn't happen yet.
ASM Side:
============
From the systemstate dump on ASM, multiple processes are waiting on 'ASM file allocation latch' and we are kind of stuck on stack:
ksedsts()+461<-ksdxfstk()+32<-ksdxcb()+1782<-sspuser()+112<-0000003218E0C5B0<-kfuhInsert()+175<-kffilCreate()+601<-kfnsUFG()+3691<-kfnsBackground()+4382<-kfnDispatch()+527<-opiodr()+1149<-ttcpip()+1251<-opitsk()+1633<-opiino()+958<-opiodr()+1149<-opidrv()+570<-sou2o()+103<-opimai_real()+133<-ssthrdmain()+214<-main()+201<-__libc_start_main()+219
This caused the hang on the ASM side and hence ASM was not responding to the database. The CF Enqueue issue on the database was a side effect of this.
This is a direct <BUG:9232266> which is a duplicate of <BUG:8974548>

Thanks Murali,
I was little reluctent to open a tar since my experince says that its better to troubleshoot the issue yourself instead of spending time with the Oracle support :)
Well, I got some more information on this : the sql for the process id of ASM instance is :
Alter Diskgroup mount all;
It looks like it is unable to mount the diskgroup and get hunged at that point , is it due to the new disk added to the system or do we missed something after adding the new disk.
Also, the ASM process can not be killed from unix box while the ASM is down.
Will appreciate your time if we can move in any directions from here ..
Thanks ,
Ankur

When I upload new music onto my iPhone 5 it causes existing music to no longer be playable and a circle with an exclamation mark to appear next to it. Or that it won't upload at all, the song is in grey with a dotted circle. Why is that?

When I manually upload new music onto my iPhone 5 it causes existing music to no longer be playable and a circle with an exclamation mark to appear next to it. Or that it won't upload at all, the song is in grey with a dotted circle next to it. This is incredibly frustrating; especially as I have 1.9GB free on my phone.. why is that?

Try this procedure; it has worked for many people.
Un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.

2012 r2 file backup causes all VMs to go in to "backing up"

I'm using windows server backup on server 20012 r2, just doing a file backup of the hyper v VMs. When I do this, all of the child VMs go in to a "backing up" state for the entire backup. I'm still able to connect to each VM but they
run so slowly they're unusable. I have it set to do incremental backups, but sometimes it will still take hours to back up, which causes the child VMs to be basically locked up for hours. Is there any way to set it to only back up one VM at a time
rather than lock them all up throughout the backup process?

Hi, thanks for getting back to me.
I can select each VM individually when doing the application backup (and they all show as being able to do an online backup) but I just back up the drive rather than the hyper-v vm.
I guess I'm curious if all this is to be expected behavior when doing a drive backup that includes the VM vhd files. Should all of them go in to a "backing up" state for the entire backup (and causing all VMs to run very poorly). This seems the
opposite of how it worked in 2k8 where I could schedule the backup for the drive that contained the VMs and still use each and every VM just fine during the backup.
Also I've noticed there's not really a way to stop the backups at all, I can try to stop the job but nothing ever happens, and i'm forced to do a hard reboot of the machine. It's acting like it's stuck making the shadow copies until the backup completes.
I've noticed this behavior on 2 different 2012 servers so this makes me think that this is expected behavior for doing a file backup on 2k8 VMs.
Hi David,
Is this server configured with a CSV volume for storing these VHDs ? I have seen that backups of VMs on a CSV will put entire VMs in backing up status.
Backing up status means that a snap shot is getting created while the backups are happening. A checkpoint is created of every virtual machine that is to be backed up. Writes are temporarily redirected to the checkpoint which gives the backup requester
a clean & crash consistent copy of the virtual machine’s VHD or VHDX files that are safe to read. The checkpoints are merged with the parent disk once the backup is finished.
I will also test this on my lab.
Cheers.
Shaba
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

Adding a new subscriber in CUCM 9.1.2 cluster cause all device reset

I am on CUCM version 9.1.2 ,whenever i add the subscriber /upgrade the subscriber to Cluster ,all the registered devices drops .
Not sure why ,In Cisco Documentation ,it never stated this bug in 9.1.2 service release notes.
However , In 9.1.1 mentioned about this in important notes.
CSCub12922: Adding a new subscriber causes device reset
After you install a new node in an existing cluster, all phones that are registered to the cluster are reset.
Anyone experienced ? or aware about this bug?
Is this the case going forward in any version after 8.X? for subscriber addition to cluster will reset the devices?
Thanks
Manoj

Hi Manoj,
As per the following bug
https://tools.cisco.com/bugsearch/bug/CSCub12922/?reffering_site=dumpcr
Symptom:
Add new subscriber to existing 8.x CUCM cluster cause all device reset
Conditions:
Adding a new subscriber to existing 8.x CUCM cluster cause all device reset due to database update. Issue recreated in lab when "Prepare Cluster for Rollback to pre 8.0" set to both true & false. The symptom and logs are the same in each scenario
This is not a bug. The condition is applicable only to CUCM 8.6 and higher releases. Whenever a node is added to CUCM cluster , from CUCM 8.6 onwards , the phones belonging to that Call Manager group will be automatically restarted
Workaround:
None
So, this applies to all 8.6+ releases of cucm.
HTH
Manish

I just brought iMac OS x version 10.7, when I try to run Scottrader Streaming quotes, it constantly locks and causes all the other windows frozen. please tell me what should I do, it looks like Apple iMac platform is not good for online trading. thanks

I recently brought a iMac OS X version 10.7 PC, when I try to run Scott Trader real time streaming quotes, it contantly *****, and causes all other widowns frozen, please help me to resolve this problem, or i have to give up this PC and return it to the store....
thanks

I use e-trade and a couple of times, years back, I found them behind the Java updates.
So, now I install new Java platforms on my backup disk and test the streaming data on that first because I know it will be over-written that evening with my nightly backup.
Of course, since I began doing that there hasn't been a problem. Do the same with printer driver updates.
Anyway, call ScottTrade and howl! Tell them how many Macs are out there and why aren't they in Apple Developers Program?

I somehow caused all of the icons to disappear from my h...

I somehow caused all of the icons to disappear from my home screen and can't get them back. What do I need to do?

Hi and Welcome to the Forums!
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
If that does not work, then please return to these forums (http://supportforums.blackberry.com/rim/) and register an account so that we can provide you with direct assistance.
Cheers!Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Last op system update on mine/my wife's iPad causes all video apps (Netflix/Hulu/CBS/History,etc) to NOT flow uninterrupted; constant breaks

Last op system update on mine/my wife's iPad causes all video apps (Netflix/Hulu/CBS/History,etc) to NOT flow uninterrupted; constant breaks. Type problem into Safari and many folks having same problems wig Hulu and other video/TV apps crashing repeatedly! It's EXTREMELY irritating and aggravating! The apps didn't crash like that until AFTER the latest operating system update for iPads was pushed/downloaded.

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

All toolbar searches causes all tabs to be highlighted in firefox 8

All toolbar searches (File; Edit; View; History; Bookmarks; Tools; Help) when scrolling down causes all tabs to become highlighted. I did not have this problem in version 3.6 since I upgraded to both 7 and 8 this problem continues to be an issue.

Try a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Inconsistent interface cause unintentional use of wrong payment method with worthless CS

I don't forsee anything coming from this, but I will put my experiences on here. I use Paypal quite a bit, and I use the same sites a lot. I have credit cards, and I usually want to pay by credit cards. But because I also have bank accounts attached, Paypal forces me to use a bank account as default payment source and credit card as backup. Because of this, everytime I buy something, I have to change payment sources. Over the years, I got used to the interface where you first enter username and password, and then it shows you how much you're paying, and what payment method you're using, and a button to actually buy it. Since last year or so, on some sites I would see a different interface where you enter a password and it immediately charges the default payment method. Because I got used to entering username and password and then reviewing payment information, I accidentally used my default method multiple times, but on relatively small things. What really got me though, was a recent transaction that I made for a website that charged a different currency. Because the website switched to the one-page checkout, I entered password and it instantly used my bank. I tried to close the page but the transaction already went through. I looked at the paypal transaction and the exchange rate paypal was giving was 3% off market rate and I lose out on 1.5% rewards, costing me about $10. I called Paypal customer service, but it was not open at the time. I called the next morning, and the guy said that because the transaction went through, I would have to contact the merchant. I asked him if there were other ways, and he said I could do a stop payment at the bank, which would cost more money than it was worth. I asked to talk to a manager, and the manager said that he could do nothing. I then told him that the unintuitive interface was costing me money and he squarely blamed me for the mistake and did not want to acknowledge that there could be anything bad about the UI setup, and did not provide any help. The manager blaming me for a mistake caused by inconsistent experience is what finally made it obvious that Paypal is fine with playing dirty and tricking customers. I called a different department and asked if the interface could be disabled for my account so that I can have a consistent experience, and it was declined. I then checked what causes the different interface, and noticed that it only happens if you have already paid on the website before and it remembers you. I contacted the merchant, but on the next business day when they got back to me, they said they could not because they already shipped the stuff, which is pretty much what I expected. From the fact that Paypal stands to make much more from a bank transaction than from a credit card transaction (2.x% vs 0.x%) and what I have experienced, I have lost trust in Paypal and I believe that Paypal is using sneaky tactics to trick customers into using bank payments, costing people card rewards and hoping that that people do not notice. With my customer service experience, it is obvious that Paypal does not care about customers enough to go beyond what all the other payment services provide with customer service. Luckily for me, even though I am out of luck on the transaction that already happened, I noticed that I could just remove all of my bank accounts and it will force the default to be a credit card. With that, the one-page payment actually will work well if my default is what I want. Once I can remove the bank account used for my latest transaction, I will hopefully be able to set my default to the credit card I want to use. If it has some odd rules about selecting defaults, I might just have to reduce my wallet to a single credit card, at which point I will probably slowly migrate off of Paypal.

Step by step, how did you arrive at seeing this agreement?

Ios8 is causing all my tv's to scramble with bars

Similar Messages

Maybe you are looking for