IOS8 update won't work - low disk space x2
I want to update my iPad to iOS8. To do this, I have 2 problems - the first one (low space on the iPad) I can deal with. But as I understand it, the work-around involves using iTunes. So I need to update iTunes. Except I am running low on space on the C drive on my Windows 7 laptop - so I would like to know what I do - it looks like re-locating my Apple Software Update folder? I would appreciate a step-by-step guide, please
Hi ..
iOS 8 requires 1.1GB's of storage space.
iOS 8 Is Here but Your Storage Is Full: Here’s What to Do
Similar Messages
-
Problem With Low Disk Space - Message - Email and ...
Hi all,
I have a N97 and i noticed that when i have around 200 stored messages in my sent and my received in box then i get the e-mail disconnecting and saying to me that it's been disconnected due to low disk space.
So i tried changing the location of the folders for the e-mails and then i got a warning about the folders not being correct and had to restore them to the original settings.
I'm sure this is also related but some one tried to send me a small video via blue tooth and it told me that the memory was full but for the life of me i can't seem to change where a blue tooth message would go too.
Thanks in advance for any tips.
i know i may have 2 separate issues here but it's all the same low disk space or out of disk space etc etc
it would seem that it's a problem so how can i go about fixng it, it's poor...
The first offering is Nokia's new 'Messaging' client. If you really, really have been looking forward to this then by all means install it, but beware that it will, between application and messagebase, use up a lot of disk C: on its own. And you can't switch the messagebase to 'mass memory', because that gets locked out when you connect your N97 up to your PC or Mac, switching Nokia Messaging back to C:. As a long time Gmail user, I still find it easier to use either the 'old' S60 Messaging application (in IMAP4 mode) or just use the standalone Gmail (Java-based) application, which has the benefit of speed and of an utterly minimal footprint in daily use.
Also offered via 'Sw update' is Ovi Maps 3.1, which also insists on ensconcing itself on C:. If version 2.0 is working well for you then there really isn't a compelling reason to update, to be honest. Or at least not one that's compelling enough to warrant signing over at least 7MB of C: to it. If version 2 isn't working for you, you still shouldn't install v3.1, as offered, but go for the very latest v3.3, from the Nokia Beta Labs Maps page. It's faster and slicker and at least you'll be getting extra functionality for your lost Megabytes, including less troublesome GPS performance. See below for more on the GPS.
Next is Ovi Contacts, a beta-quality social integration system that's yet to take off in any meaningful way. Again, just avoided unless you really, really want to get involved. You don't need to lose the vital Megabytes.
Then there's the N-Gage games client, another C: biggie, seemingly swallowing up 6MB or so in a real world installation - if, like me, you're rather underwhelmed by N-Gage titles (in fact, underwhelmed by gaming on Symbian in general, but that's another rant for another day), then just say no and, again, give your internal disk a break.
The final optional 'Sw update' was Quickoffice 6, bringing compatibility with Office 2007 documents. This also takes up the best part of 10MB on C:, so unless you get a lot of Docx or Xlsx files by email then I'd strongly suggest holding fire on this update - you'll probably get it anyway in the v20 firmware in a few months time.
Message Edited by mowax on 02-Dec-2009 02:38 PM
Message Edited by mowax on 02-Dec-2009 02:39 PM
Solved!
Go to Solution.Hi, don't know wether you've done this, but go into messaging/options/settings/other/memory in use/set as E:mass memory. If this causes a problem with email, simply delete mailbox and re-install it, it only takes a couple of minutes. One other thing , if you want to save any txt messages, sync with ovi first.Also to get C memory back delete all messages sent , recieved, reports etc before selecting Memory in use as E. Also go to web browser and clear privacy data regularly. One other thing to note is that usually when connected to computer via usb, messaging memory will revert to C, and you won't be able to see any messages , so reset to E again and they are all there. Best taskmanager from Ovi store is also a real help with memory on phone.
Hope this helps, and my appologies for the somewhat eratic layout nof the advice. Should have mentioned clearing messages from C before using E !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
I keep getting a (false) notification from HP Support Assistant: low disk space on C drive?
Hi, this morning upon starting up my computer the magnifying glass was hovering over the HP Support Assistant icon and usually that means it is checking for updates etc... but I noticed it turned into a yellow exclamation mark so I clicked on it and opened up HP Support Assistant. The exclamation mark was now in the "updates and tune-ups" and said there were "recommended messages available." Upon clicking this the exclamation is now on the HP messages tab and upon clicking that I am taken to a notification that says: "Low Disk Space on Primary Drive C:" So I click on it to find out more information and it says that I am running out of free disk space on my C drive and that I need to perform a disk cleanup etc...
I went to My Computer to see just how in jeopardy I was in of running out of space on my C drive. To my amazement it stated that I still had 1.27 TB of 1.35 TB available and have only used 6% of my space...
I tried emptying my recycle bin, clearing my cache, doing an actual disk cleanup, and restarting to no avail, the magnifying glass comes back after restart and the notification returns telling me that I am low on disk space in the C drive...
I have come to the conclusion that this must be a false notification but I have no idea how to get rid of it...it isn't a huge issue as it doesn't impair my usage on the computer, however, it is kind of annoying to keep seeing this notification...
Is there any way to get rid of this notification?Hello @blackrosevain,
I understand that you are getting the 'Low Disc Space' error message on your HP Pavilion Elite h8-1010t Desktop PC running Windows 7. I am providing you with an HP Support document: Error: Low Disk Space. You are running out of disk space on Recovery (Windows 7), which addresses the error you are getting and has the steps needed to fix it.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
HP530 OS_ (E:) tools reporting as low disk space
Hi,
Following some tinkering by me following some Microsoft support suggestions, I think I have managed to solve my issues with windows updates...It did involve an emergency restart and a system restore from an external hard drive, and I think all is running OK now...the trouble is, I now can't seem to make a new back up on the external hard drive as it comes up with an error code and the OS_(E tools reporting low disk space. The HP_(D recovery is also looking quite full (although not red yet like the (E tools. The OS is Windows Vista Home basic 32- bit.
Thanksthese two links will guide you to resolve the issue:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00678180&dlc=en
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01508532&tmp_track_link=ot_recdoc/c00678180/en_...
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-|| -
Low disk space Applescript (AppleEvent handler error -10000)
Hello,
I am new to Applescript, downloaded script from online for low disk space alert and was working properly on one mac but getting error on another mac of same version. Someone please help me on this.
Thanks in advance.
-- Script to warn users of low disk space remaining on fixed (hard) disks
-- Created by Matthew Lindfield Seager on 21st March 2007
-- © Copyright Matthew Lindfield Seager
---------- change these settings ----------
set expectedNumberOfHardDisks to 2
set minimumFreeSpacePercentage to 60
set sendToAddresses to {"[email protected]"}
set sendImmediately to false -- If this setting is false the message will be created but won't be sent until someone manually clicks the "send" button. Only useful for testing!!!
---------- change these settings ----------
tell application "System Events"
set hardDisks to (name of every disk whose local volume is true and ejectable is false) as list -- list of all hard disk drives
set notEnoughDisks to false
set almostFullDisks to {}
set almostFullDiskNames to ""
set computername to (do shell script "networksetup -getcomputername")
if (count of hardDisks) is less than expectedNumberOfHardDisks then
set notEnoughDisks to true
end if
repeat with i in hardDisks
set diskName to (i as string)
try
set totalSpace to round ((capacity of disk diskName) / 1024 / 1024)
set freeSpace to round ((free space of disk diskName) / 1024 / 1024)
set percentFree to (round (100 * freeSpace / totalSpace))
if percentFree is less than minimumFreeSpacePercentage then
set almostFullDisks to almostFullDisks & {i}
set almostFullDiskNames to almostFullDiskNames & diskName & ", "
end if
end try
end repeat
end tell
if notEnoughDisks or ((count of almostFullDisks) is greater than 0) then
set messageText to "There is a potential problem with the hard disk drives on the server." & return & return & "Details:" & return
if notEnoughDisks then set messageText to messageText & " * A hard disk drive may be missing" & return
if (count of almostFullDisks) is greater than 0 then
set messageText to messageText & " * The following hard disks may be close to full capacity: " & almostFullDiskNames & computername & return
end if
tell application "Mail"
activate
set warningMessage to make new outgoing message with properties {visible:true, subject:"Warning: Low disk space", contentmessageText)}
repeat with i in sendToAddresses
tell warningMessage
make new to recipient at beginning of to recipients with properties {address:i}
end tell
end repeat
if sendImmediately then send warningMessage
end tell
end if
Following is the error:
tell application "System Events"
get name of every disk whose local volumn = true and ejectable=false
-->error number -10000
Result:
error "System Events got an error: AppleEvent handler failed." number -10000.Hi,
I believe these are the commands (round and do shell script) which causes this error.
because it's not recommended to use commands of the osax "Standard Additions" in the 'tell application "System Events"' block, although it works most of the time.
Here is the modified script that does the same thing :
set expectedNumberOfHardDisks to 2
set minimumFreeSpacePercentage to 60
set sendToAddresses to {"[email protected]"}
set sendImmediately to false -- If this setting is false the message will be created but won't be sent until someone manually clicks the "send" button. Only useful for testing!!!
set almostFull to ""
tell application "System Events"
set hardDisks to (disks whose local volume is true and ejectable is false) -- list of all hard disk drives
repeat with tDisk in hardDisks
try
tell tDisk to set percentFree to (100 * (its free space)) div (its capacity)
if percentFree < minimumFreeSpacePercentage then
set almostFull to almostFull & (get name of tDisk) & ", "
end if
end try
end repeat
end tell
set notEnoughDisks to (count hardDisks) < expectedNumberOfHardDisks
if notEnoughDisks or (almostFull is not "") then
set messageText to "There is a potential problem with the hard disk drives on the server." & return & return & "Details:" & return
if notEnoughDisks then set messageText to messageText & " * A hard disk drive may be missing" & return
if almostFull is not "" then
set computername to do shell script "/usr/sbin/networksetup -getcomputername"
set messageText to messageText & " * The following hard disks may be close to full capacity: " & almostFull & computername & return
end if
tell application "Mail"
activate
tell (make new outgoing message with properties {visible:true, subject:"Warning: Low disk space", content:messageText})
repeat with i in sendToAddresses
make new to recipient at beginning of to recipients with properties {address:i}
end repeat
if sendImmediately then send
end tell
end tell
end if -
Low Disk Space Recovery Drive D
My computer is an hp G60 121WM, which is Vista Home Premium running windows Vista 32 bit OS. I messed up while in 'backup and restore' and sent the backup to the partitioned drive (D) used for system recovery. Is there any way to access this drive or remove the mess I sent there? It won't let me in by the simple route of trying to open it from the 'computer' dialog. I can't use backup and restore now, and every time I boot up the computer I get the message that I have low disk space in drive D. It's not a real problem (so far), but is very irritating. And if I ever do need to do a restore (back to a previous automated backup) I'll be unable to do that. I'll appreciate any help from more seasoned users. Thanks
ps. I don't quite understand why hp recovery drive being full impacts windows backup and restore, so the problem with that may be coincidental. You tell me. As you can see, I'm not well versed in computer use!A useful utility for viewing all the files on your PC is called Free Commander, on the link below, as it displays folders that the Operating System normally hides and has a good search function.
http://www.snapfiles.com/php/download.php?id=107872&a=7122339&tag=601108&loc=10
This is a zipped file. If you don't have an extraction utility installed, download and install 7-Zip which can be used to open this so that you can run the installer.
When installed, launch Free Commander, click the D partition in the toolbar and look for any files that obviously don't belong here, cut them out and paste to a location of your choice on the C Partition.
After doing this, make sure that Windows Backup and Restore is directed to a new location.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
All of sudden My Crive is showing Low disk space. Can any one help me int his issue.
And also in my E drive this is not even a single file But it is showing 7 GB less . What will be the problem.
Please help me ...
SudheerI'm running XP. Won't do Vista. No new fatware if I can help it. I just inherited a broken machine and gonna' put Linux on it.
FYI,
The Prefetch directory was a new one to me just recently. Selecting all and deleting was a definite improvement. ALSO, empty the trash. All those deleted files are still on the hard drive unless they are deleted.
Defrag is your best friend. Under accessories and system tools is this handy utlitity. I defrag once a month and just makes things run better. If you're into it, set the Virtual memory on your hard drive. Virtual memory is what Windows uses instead of hardware memory. It used to be called the swap file. I always had it set manually but then I let Windows decide how to manage this memory and it didn't work. I very soon ran out of memory. STUPID me. So I set the virtual memory to minimum 1024 and maximum 1024. It's fixed and my T23 is running really smooth.
And if you are running into these kind of issues but know you have hard drive space left, do all of the above. You and your machine will be very pleased.
Message Edited by T23FUN on 07-08-2008 01:34 PM
ThinkPad T23, 2647 HU8, Based on 2647-8RU: PIII-M 1.20GHz (512KB), 512MB RAM, 40.0GB HDD, 14.1 XGA(1024x768) TFT LCD, 8x8x24x/8x CDRW/DVD, Modem(MPCI), Ethernet(CDC), WinXP Home, Linksys Wireless B adapter. -
Low disk space in recovery disk (d) drive in window 8.1
I continue to receive the subject warning. I have never added any files to D, but I have 32.3 MB free of 25.5 GB. I have Administrator privilrges but am unable to view the files on D. When I click on recovery, I get an HP warning.
Hi @pjd10
I grasp that you are a low disk space error on recovery D. I regret that you are having that difficulty.
Here is a link to HP PCs - Error: Low Disk Space. You are running out of disk space on Recovery (Windows 8) that should guide you to resolving this issue.
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Low Disk Space Error on Install
So I've been struggling on this all morning. I can't install
flash player on my hard drive because it says I have a low disk
space. I read on some forums that it's because the flash player
software is hardcoded to check the 'C:\' for sufficient space. My
hard drive is the 'H:'. My 'C:' drive is allocated as an usb but
whenever I plug in a flash drive it defaults to 'K:'. I have tried
to tinker around in disk management but I cannot rename or change
my 'H' drive to be the 'C:'. I can not also rename the 'K:' to be
the 'C:' either. This seems like such a simple problem, I'm a
little disappointed that the software is written so that it checks
the 'C' drive opposed to the drive the .exe file is running off of.
Any help would be greatly appreciated.
ThanksHi,
Please see the document regarding this issue on the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01508532&cc=us&dlc=en&lc=en
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Low disk space (Boot Camp) - can I repartition my hard drive?
Hi there -
I am a MacBook user through and through. However, I partitioned my hard drive 3 years ago using Boot Camp to do some light Windows-only work. I only partitioned 8 GB to Windows, which wasn't a problem til now. I'm now trying to use some Windows-only software again, but am faced with a "low disk space" message. I cleaned up as much as I could with 8 GB, but it's still not enough. Can I re-partition the hard drive to more like 20 GB without losing any of the data and/or installed software (I don't have access to the install disks...)? I tried to install WinClone but I have OSX 10.5.8, and it said it only runs on 10.6 or 10.7. Can anyone offer advice on an option to re-partition with Boot Camp, without losing the installed software and files/data?
I have a MacBook running OS 10.5.8 with 2.16 GHz Intel Core 2 Duo and 2 GB 667 MHz DDR2 SDRAM (I know, it's old!!!)
ThanksThe correct answer to the question was given by The hatter so take notice please. I will help you gain knowlege ot CampTune by providing the url to the site. Happy sailing!
http://www.paragon-software.com/home/camptune/ -
Qosmio X500 Folder migration utility and low disk space drice C
This may be a longish post as I try to explain my problem... please forgive.
I've had my X500 for just over three months now.
It took a little while before the folder migration utility woke up I didn't know it was there after I'd done a limited copy of folders across from my old Qosmio F20. After it had woken up and I'd been able to transfer folders/files across it cleared a lot of room from the 'tiny' - I feel, 60 Gb SSD C drive.
I keep getting a message coming up sometimes, when I boot up, that the folder migration utility has a setting for me. If I open the utility it shows no folders in the 'C' drive area and folders already transfered [from first using it] in the right hand side for the 'D' drive. Text in the bottom of the utility says something like "if you have done some manual transfers then it can't do anything"... something along those lines - sorry for not being clear on that.
I've recently installed some other programs and have endeavoured each time to do a custom install to the D drive to program files [x86] folder. However, drive C is now showing low disk space at 5.58 of 59.2 Gb.
Checking the folders copies??? I thought for the programs I installed I find lots of folders/files in those program folders so taking up a lot of space.
What is the best way to free up space on drive 'C' please?
Should I manually copy the data contained in the folders [not just a 'name' ... ie; AVID... folder but possibly also in the drive C Program files [x86] folder] to the same named folders on drive D?
If I did, would the programs work properly or would there be problems in the program being located?
When the utility first activated [by itself] I thought "Great... transfer of all my old data to the X500 will be easy" but it doesn't seem to be the case. I was expecting that any new programs installed would be automatically copied to drive D. I'm getting somewhat paranoid about the low disk space on drive C.
Help would be appreciated.Thanks for coming forward PauPau.
Firstly, when I got the x500 I had lots of documents etc., I wanted to transfer over so I used the Win7 Transfer program to make the back up/transfer images. In doing the transfer across [after the copies of] the X500 gave an error warning that the C: drive had insufficient space to do the full copies. At this time/stage I was not aware that the X500 had a folder migration utility. What ever made it 'wake up' and make itself known I have no idea but I used it when it did. My first problem was probably in using the Win7 file transfer - for getting files/folders across from the old computer to the x500!
I ended up doing a factory reset about three times before this utility made it self known. I found NOTHING in ant documentation about the X500 about this utility and how to make use of it when I bought the laptop. Not sure if you are aware of the make up of the X500 having 2 hard drives; a 'C:' drive of 65Gb SSD and a SATA 'D:' drive of 650GB. If you do then my apologies if that comes over in any 'bad' way. The D: drive is NOT a partition of 1 installed hard drive as your reply would seem to suggest you are thinking.
The migration folder utility, when used first time, copied/transfered folders across - even program folders such as Program files [x86] - and left 'similar' named folders on the C: drive. At that time I then thought that any future installs of programs would be put in the D: drive. Only when watching the first time for a new program install did I see it going to the C: Program and Program files [x86] folders instead of those in the D: drive. I then had to uninstall and do a custom install to direct to the D: drive. However... some data appears that it can NOT be directed from the install disk to the D: drive and still goes to the C: drive - HENCE the issue I am having with the small amount of remaining free space on the C: drive.
I accept what you say in reply to my question about the best way to free up space but, based on as explained above, should I have to do a re-install of any program I try to run after being moved to the same named corresponding folder on the separate D: drive [if that is what I have to do] I think the install disk will still do an automatic install of these to the C: drive as at that stage there seems no way of stopping it. Although given the option in a custom install to change the 'drive' to install to such as the D: some data is still going to C: and I'll be in the same predicament that I am now.
If that's the case then maybe this is something that TOSHIBA should be looking in to solving if they are going to produce laptops with two hard drives - - - even if one [the C: drive] is of the SSD make to speed thing up.
I DO appreciate your input. MAybe I didn't explain properly first time... and maybe I haven't this time - in which case I apologies.
Are there no other X500 users with the same issue?
Thanks. I may just have to give it a go and transfer these data files/folders manually to the D: and see what happens if no one here can guide as to stop any hair pulling frustrations if it goes wrong. -
Incorrect Low Disk Space Warning from HP Support Assistant
I have an HP Envy m7 notebook. I am getting a warning from the HP Support Assistant that the Primary Drive C: has low disk space. However, my Windows 8.1 Properties box for the C: drive says more that 90% of the drive is free, as I guessed. Why am I getting this seemingly incorrect warning?
Hi sheryltoo,
Thank you for your query, I will do my best to assist you.
I understand the HP support assistant is giving you a low disk space error, but you have plenty of free space available.
Did the error pertain to a different drive letter other then you main drive?
I suggest you uninstall and reinstall the The HP Support Assistant. If you have an older versions installed that may be why you are getting a false error.
Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Reports for Low disk space alerts in scom 2007
Dear Experts,
Is there any possible to get the Low disk Space alerts reports in SCOM 2007 R2.
1, I need reports for Last week SCOM sent alerts on Low Disk space for the servers list
2, Likewise I need SCOM Low disk space alerts reports for last month.
Can somebody please explain me with the steps and I played much with Reporting pane.
Thanks,
SaravanaHi,
The below code should work to get all servers that have alert of logical disk free space is low in specific period:
get-alert -criteria 'Name = ''Logical Disk Free Space is low'' AND TimeRaised >=''3/24/2014'' AND TimeRaised <= ''4/24/2014''' | select MonitoringObjectDisplayName,MonitoringObjectPath,Name,TimeRaised | sort MonitoringObjectDisplayName
Here is a similar thread for your reference:
how to create a report showing the servers that had the alerts of "Logical Disk Free Space is low" for a specific period?
http://social.technet.microsoft.com/Forums/en-US/50f2c3fb-2dfc-47c6-8c2a-8a2f0149df10/how-to-create-a-report-showing-the-servers-that-had-the-alerts-of-logical-disk-free-space-is-low?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li -
Dear Experts,
One of mine DEV server is running out of space in the SAP drive ( D: )
ECC 6.0 and SQL SERVER 2005
Total size Allocated : 270 GB
SIDData1 : 24 GB
SIDData2 : 23 GB
SIDData3 : 24 GB
SIDLOG1 : 170 GB
Now the message showing in Low Disk Space ( Remaining 5 MB is there ).
So Please tell me what sholud i do?
Kindly give me advice.
Thanks in Advance
Thomas.TDear mark,
I take backup in weekly basis.
In DB02 --> SIDLOG1 175,069 (Size ) N/A 2097152 (Limit ) 10 % D:\SIDLOG1\J03LOG1.ldf
From SQL Studio, Shrunk Log file-->
Currently Allocated : 175069.38 MB
Available Free space : 16017.72 MB (9%)
Now How to set Shrunk file and how much i can put Please Let me know.
or else I won't assign the Shrunk file then what will happened?
Regards
Thomas
Edited by: thomas_raja on Sep 3, 2011 5:17 PM -
Low Disk space (0 Bytes) in BI Server.
Dear All,
I am working on BI Publishers, i am facing the problem of Low Disk space (0 Bytes) in BI Server.
I found that the xml files which are in the following path occupied 45 GB
D:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xml
Can i delete that xml files.
Awaiting for replay.
SubbuDear All,
I am working on BI Publishers, i am facing the problem of Low Disk space (0 Bytes) in BI Server.
I found that the xml files which are in the following path occupied 45 GB
D:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xml
Can i delete that xml files.
Awaiting for replay.
Subbu
Maybe you are looking for
-
I have all of the sudden had issues with all of my AIR applications. I recently tried installing 2 new ones and the icon will bounce in my dock for a few seconds before disappearing as if it were quitting before anything happened. Installations of th
-
Please help, i am so scared that i will never get my laptop back the way it was.
-
Hi all, Right now I am functioning on Oracle finance and I am stuck .I will grateful if you make available me any solution or any hint. Step: 1) User will create PO orders . 2) He/She will approve PO orders. 3) After User will attaché cou
-
Will there be Mer for the N900? any chance of Seei...
I have been following Mer wiki for some time but i cannot see anything about the N900 http://wiki.maemo.org/Mer http://wiki.maemo.org/Mer/Status and i was wondering, will there be anything like the Ubuntu Mobile Internet Device OS on the N900? seems
-
Linked table in Access not displaying all SharePoint List columns
In Access 2007 I created a link to a list in SharePoint 2010. Originally the modified by and created by columns were not visible in SharePoint. They did not appear in the Access table. I made the two lists visible in Sharepoint and refreshed the li