IOT and lots of random inserts
hi guys,
if we have an IOT and we do a lot of random inserts, does it mean that because the IOT will constantly be rebuilt, we can suffer from bad performance? therefore, is an IOT not advisable when we do a lot of random inserts?
thanks
Edited by: OracleGuy777 on Feb 24, 2009 2:42 AM
Oguy.,
I am not sure that this is a right thing to say that with the random inserts, Oracle would always rebuild an IOT or we would be required to do a rebuild. I am not sure that I have read the same anywhere. Yes, there are drawbacks related to the IOT with the DMLs happening over them and one of the prominent ones is that the IOTs don't carry a real rowid but a logical rowid. Due to the logical rowid being used, they use a guess mechanism to search for the row when requested. This guess will become invalid if there are many many dmls happening over the IOT thus making the searches more less possible and efficient. So in the context of this arguement , it can be said that the IOTs are not suitable where huge DMLs are happening.
That said, if you can provide the reference to the link where you have read this , it would be easier to comment.
HTH
Aman....
Similar Messages
-
I have bought an I pad Air 128 with cellular connection.I travel a lot and will need to insert various cellular providers sim cards in the countries i visit. Will these various sim cards work in the I pad Air or is the i pad locked?
Hello, no ice.
Thank you for visiting Apple Support Communities.
As long as you purchase the GSM model and acquire a Nano-SIM card, you should be able to use your iPad abroad. Here is some information about this process that you may find helpful.
iPhone and iPad: Using cellular networks while in another country
http://support.apple.com/kb/ht1807
Cheers,
Jason H. -
This seemed to happen very suddenly; I left my iMac running while i went out and came in to find that the screen was totally unusable, as you will be able to see from the picture it has a lot of lines that seem to come and go a random and sometimes it goes black all together. What do you think is wrong with it? Logic board? Graphics card? Screen itself?.. also if it is the graphics card, is it separate to the logic board or do both need to be replaced?
Also some additional info:
iMac Early 2008
2.4ghz
4gb Ram
OSX 10.9.2
ATI Radion HD 2400
Actual computer working on external monitor, just not internal
ThanksCosts vary by area, I think you may find out though that spending money on a 6+ year computer may not be worth it, you can buy an Apple Refurbished Mac with much more up-to-date specifications and save hundreds of $s. If this is of interest you can only find them on Apple's on-line store, in the US the current link is:
http://store.apple.com/us/browse/home/specialdeals
Then click the link to the iMacs. If you don't find one you want, continue looking the inventories change frequently, sometimes by the hour. -
AE CS5 (10.0.1.19) Ram Preview - Audio stops and continue playing randomly
I already reported this issue to Adobe as a BUG but I want to ask here if somebody else have this problem or can confirm it.
Audio breaks/stops and continue playing randomly when 'Ram Previewing'
It happens mostly when the RAM is fully filled up with image cache files! When the Ram is not filled up totally with image cache files it happens rarely!
Steps to reproduce BUG / issue:
1. create a new composition with a length of for example 5 minutes.
2. create a new solid with size of 50x50 pixel and animate the position of the solid for a very long time so when ram previewing the whole ram/memory gets filled up with different image cache data (this is very important!). Alternatively you could use a long video file to fill up the RAM completely.
3. import a wave file .wav 16bit 48khz uncompressed which is very long for example 5 minutes.
4. insert the wave file in the earlier created composition which contain the animated solid or video file.
5. Set the work area bar (preview range) for the whole composition.
'Ram Preview' the composition until the whole RAM/memory is filled up with image data.
AE has to stop rendering because there is no more space available in RAM.
make sure 'from current time' checkbox is off.
6. listen to the audio which stops playing randomly for about 1-2 seconds and comes back and continues playing (***BUG***)
7. Now set the right handle of the composition work area bar (preview range) to less then the maximum RAM size
(less then the green cache indicator on the right side)
8. "Purge image caches" or "Purge All"
9. Ram preview the now smaller work area
10. listen to the audio. The audio breaks are gone! (***Workaround***)
Additional information:
I have the latest After Effects CS5 update installed (10.0.1.19)
This behavior is tested with different audio drivers inside After Effects CS5 (After Effects WDM Sound, Generic Low Latency ASIO Driver, ASIO DirectX Full Duplex Driver)
I also tried different Sample Sizes Buffers (alternatively to the default 2048 samples) but without success.
Reducing the amount of RAM which After Effects can access didn't solve the problem!
System:
Win7 64bit all latest Updates, 8GB RAM, CPU: intel Core 2 Extreme QX9300, nVidia Quadro FX 2700M, IDT High Definition Audio Driver v6.10.0.6227
There is no driver problem on my system because After Effects CS3 & CS4, Premiere & Soundbooth CS3 CS4 CS5 have no audio problems!
I have lots of other professional audio software like Steinberg Cubase 5.... on the same system and they all work fine.
I also turned off AVG Anitivirus and Windows firewall for testing without success.
AdobeQT32Server.exe, dynamiclinkmanager.exe, PProHeadless.exe, afterfx.exe do not get blocked by firewall they have full permission.
The CS5 Production Premium installation went fine and without errors and antivirus protection was turned off for the installation.
Any help would be nice!
FelixYep, I agree with craulmedia....
It's 1 month ago after my initial post and no valuable feedback from Adobe although I filled out the bug report in addition to this post and provide my email for further information.
The only reason for upgrading from CS4 -> CS5 production suite was the use of all my 8GB RAM in AE and now AE can use it but when it's using it the audio have issues.
CS5 is on the market for nearly a year and still have such essential issues... And my fear rises there will be no valuable update fixing these issues but instead Adobe forces me to upgrade later this year to CS6 in hope something change...
I have had support request for different Adobe products in the past including telephone support, web support via Adobe ID... none with success the web support answered my request 3 weeks later with the message they will look into it... time went by and in the end the result was "Yes we know it's a known bug" the bug did not get fixed for that CS version. it even exists in the next major CS release! (talking about EncoreDVD here). Once the web support answered weeks later when I was in holidays and after some days I was not able to respond they closed my case. I reopened the case but never got an answer! Telephone support is nearly waste of time because in 95% of all cases it does not help to reinstall the whole operating system and talking to people who know less about computers in general or Adobe products then my mom - it's a waste of time.
I don't want to blame here anybody for things happend in the past I just want to point out that this time I choose an other support channel (bug report and forum post) but it seems that this support channel is also a waste of time after 1 month with no valueable feedback!
I bumped up this post 2 times and thanks to craulmedia for the third time.
And now here is my fourth time *BUMP*
All I got so far is: "I saw your bug report it's in the queue"
Is it still in the queue? which queue nr. does it have? how long will it take to get any answer? is it reproducible? Is it confirmed as a known bug by Adobe? Is Adobe working on a fix? When will this fix be available? Is the fix provided in form of an update or in the next major release?
OK, I know this is a user to user forum and Adobe people only stop by in their free time and there is no guarantee for any real support.
But it started out so good in the first time...
Last 2 things I want to add here:
1. Why should I provide my email in the bug report? Sure so Adobe can get back to me for further information... but wouldn't it be nice if Adobe would be so kind to give some status report to that given email as a small present for the enthusiastic beta testers ?
2. please Adobe take a look at www.uservoice.com already Autodesk started to move there with 3ds Max. -
Robohelp randomly inserts spaces in lists
Hi all,
I have the problem that Robohelp randomly inserts non-breaking spaces in some list entries (not all, about 50%), after the bullet and before the first character of the text. I have tried the options such as ignore numbering and mapping to a paragraph style without success. I read through various threads about lists but have not encountered this problem so far. Any ideas? The concerned list entries look fine in Framemaker.
Besides that I noticed that if a table follows a list then Robohelp wraps the table up into the last list item (overlapping, very ugly) and places an additional empty list entry behind the table. Also when importing lists (and even when selecting the Convert-to-HTML option) I see no way to map the list style to a HTML list style in Robohelp, only paragraph styles appear. It seems that for importing from Framemaker the entire list functionality has not been implemented very cleanly..We did a lot of testing and the problem of random spaces at the begin of list entries always pops up. Can anybody confirm this bug, or does this problem not appear in your projects? We need to narrow the problem down to Robohelp or perhaps some particular setting of our Framemaker styles.
-
When I turn off my mini, and at other random times, i get a simple message that says I need to restart my computer. any suggestions?
The message to restart your computer, in multiple languages, is a kernel panic. This is usually, but not always, caused by hardware, with memory being the leading cause.
You might want to run the Apple hardware test, which is on the original gray-faced OS X disks that came with the mini. FInd the one that says 'AHT Version x.x' in small print on the label, insert and reboot holding the alt/option key down. Choose the Apple hardware test, and when prompted, choose the extended test. You can also download Rember from http://kelleycomputing.net/rember/ if you want to really test the memory. Set it up and let it run over night.
See this kernel panic FAQs for other ideas: http://www.thexlab.com/faqs/kernelpanics.html -
I have Elements 10 and every time I go to open a file in the editor it shows its thinking and then it just shuts down the entire program. I have a big wedding I am working on and lots of other sessions. Please PLEASE help!!!!
And you are quite persistent, Menu Boy, in offering pernickety and pointless prattle, in response to a "support page" on iPad's buggy Pages App.
Let's summarise, for those reviewing this threadless thread for app support..
Mobile pages works reliably for simple docs, especially creating letters and Menus for Microsoft's Kindy canteen (even on special days with nice big pictures).
When importing more complex docs and/or working with larger creations, it is prone to randomly corrupting files upon re-opening, along similar lines as Word (running on a PC).
So, Menu Boy, do they let you sneak into classes every now and then? What is the secret to their training? "Say after me, if any I.T. product works just some of the time, that's a job well done, and if something randomly stops working, we call that the user's fault... And if they complain, we call them names." -
!!Urgent Help!! I can NOT open my safari, widgets and lots of application!!
Dear All,
I need a urgent help for my old mac.
I can NOT open my safari and lots of application in my Mac. I use firefox to instead of right now.
The safari usually come out with crash message "The application safari quit unexpectedly" with the report as follow.
Who can help me to solve this problem. Thanks very much.
Date/Time: 2011-04-04 23:49:17.401 +0800
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
Command: Safari
Path: /Applications/Safari.app/Contents/MacOS/Safari
Parent: WindowServer [240]
Version: 4.1.3 (4533.19.4)
Build Version: 1
Project Name: WebBrowser
Source Version: 75331904
PID: 484
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0x458a3ef0
Thread 0 Crashed:
0 ...ple.CoreServices.CarbonCore 0x90b9e138 CSStoreGetUnit + 56
1 com.apple.LaunchServices 0x9193ed4c _CSStringStoreUnitMatchesString + 36
2 com.apple.LaunchServices 0x9193eb3c _CSMapFindBucketForKeyData + 160
3 com.apple.LaunchServices 0x9193ea48 CSMapGetKeyAndValueForKeyData + 88
4 com.apple.LaunchServices 0x9193e930 CSGetStringForCharacters + 252
5 com.apple.LaunchServices 0x919497c8 _UTGetStringForCFString + 136
6 com.apple.LaunchServices 0x91949700 _UTGetBindableArrayForTag + 104
7 com.apple.LaunchServices 0x91949560 UTTypeCreatePreferredIdentifierForTag + 116
8 com.apple.LaunchServices 0x9196f3c4 CreateCorrectedMIMEType + 564
9 com.apple.LaunchServices 0x9197002c _LSCopyDownloadAssessmentDictionary + 2076
10 com.apple.Foundation 0x92d1e028 -[NSURLResponse(NSURLResponsePrivate) _downloadAssessmentWithInitialData:] + 52
11 com.apple.Safari 0x001367f8 0x1000 + 1267704
12 com.apple.WebCore 0x014fa1b0 WebCore::ResourceResponse::platformLazyInit() + 736
13 com.apple.WebCore 0x014fa698 WebCore::ResourceResponseBase::url() const + 24
14 com.apple.WebCore 0x01bb77b4 WebCore::ApplicationCacheHost::maybeLoadFallbackForRedirect(WebCore::ResourceLo ader*, WebCore::ResourceRequest&, WebCore::ResourceResponse const&) + 68
15 com.apple.WebCore 0x016c7f34 WebCore::ResourceLoader::willSendRequest(WebCore::ResourceHandle*, WebCore::ResourceRequest&, WebCore::ResourceResponse const&) + 52
16 com.apple.WebCore 0x016c7ee0 WebCore::ResourceHandle::willSendRequest(WebCore::ResourceRequest&, WebCore::ResourceResponse const&) + 528
17 com.apple.WebCore 0x015f6684 -[WebCoreResourceHandleAsDelegate connection:willSendRequest:redirectResponse:] + 996
18 ...ktop.SafariSearchResultsMod 0x0306dc90 GMLogImplementation + 4840
19 com.apple.Foundation 0x92c26fa8 -[NSURLConnection(NSURLConnectionInternal) _sendWillSendRequestCallback] + 76
20 com.apple.Foundation 0x92c26dc8 -[NSURLConnection(NSURLConnectionInternal) _sendCallbacks] + 344
21 com.apple.Foundation 0x92c26bf4 _sendCallbacks + 156
22 com.apple.CoreFoundation 0x907df300 __CFRunLoopDoSources0 + 384
23 com.apple.CoreFoundation 0x907de830 __CFRunLoopRun + 452
24 com.apple.CoreFoundation 0x907de2b0 CFRunLoopRunSpecific + 268
25 com.apple.HIToolbox 0x932bcb20 RunCurrentEventLoopInMode + 264
26 com.apple.HIToolbox 0x932bc1b4 ReceiveNextEventCommon + 380
27 com.apple.HIToolbox 0x932bc020 BlockUntilNextEventMatchingListInMode + 96
28 com.apple.AppKit 0x937a1734 _DPSNextEvent + 384
29 com.apple.AppKit 0x937a13f8 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
30 com.apple.Safari 0x00011638 0x1000 + 67128
31 com.apple.AppKit 0x9379d93c -[NSApplication run] + 472
32 com.apple.AppKit 0x9388e458 NSApplicationMain + 452
33 com.apple.Safari 0x00118adc 0x1000 + 1145564
34 com.apple.Safari 0x00007ea0 0x1000 + 28320
Thread 1:
0 libSystem.B.dylib 0x9002bfc8 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x90030aac pthreadcondwait + 480
2 com.apple.WebCore 0x014e98d0 WebCore::IconDatabase::syncThreadMainLoop() + 320
3 com.apple.WebCore 0x014e73b8 WebCore::IconDatabase::iconDatabaseSyncThread() + 440
4 libSystem.B.dylib 0x9002b908 pthreadbody + 96
Thread 2:
0 libSystem.B.dylib 0x9000af48 machmsgtrap + 8
1 libSystem.B.dylib 0x9000ae9c mach_msg + 60
2 com.apple.CoreFoundation 0x907de9ac __CFRunLoopRun + 832
3 com.apple.CoreFoundation 0x907de2b0 CFRunLoopRunSpecific + 268
4 com.apple.Foundation 0x92c1eb7c +[NSURLCache _diskCacheSyncLoop:] + 152
5 com.apple.Foundation 0x92bf64d8 forkThreadForFunction + 108
6 libSystem.B.dylib 0x9002b908 pthreadbody + 96
Thread 3:
0 libSystem.B.dylib 0x9000af48 machmsgtrap + 8
1 libSystem.B.dylib 0x9000ae9c mach_msg + 60
2 com.apple.CoreFoundation 0x907de9ac __CFRunLoopRun + 832
3 com.apple.CoreFoundation 0x907de2b0 CFRunLoopRunSpecific + 268
4 com.apple.Safari 0x000298e0 0x1000 + 166112
5 com.apple.Safari 0x00029864 0x1000 + 165988
6 libSystem.B.dylib 0x9002b908 pthreadbody + 96
Thread 4:
0 libSystem.B.dylib 0x9000af48 machmsgtrap + 8
1 libSystem.B.dylib 0x9000ae9c mach_msg + 60
2 com.apple.CoreFoundation 0x907de9ac __CFRunLoopRun + 832
3 com.apple.CoreFoundation 0x907de2b0 CFRunLoopRunSpecific + 268
4 com.apple.Foundation 0x92c054a4 -[NSRunLoop runMode:beforeDate:] + 172
5 com.apple.Foundation 0x92c053dc -[NSRunLoop run] + 76
6 com.apple.Safari 0x0007e958 0x1000 + 514392
7 com.apple.Foundation 0x92bf64d8 forkThreadForFunction + 108
8 libSystem.B.dylib 0x9002b908 pthreadbody + 96
Thread 5:
0 libSystem.B.dylib 0x9000af48 machmsgtrap + 8
1 libSystem.B.dylib 0x9000ae9c mach_msg + 60
2 com.apple.CoreFoundation 0x907de9ac __CFRunLoopRun + 832
3 com.apple.CoreFoundation 0x907de2b0 CFRunLoopRunSpecific + 268
4 com.apple.Foundation 0x92c1da3c +[NSURLConnection(NSURLConnectionInternal) _resourceLoadLoop:] + 264
5 com.apple.Foundation 0x92bf64d8 forkThreadForFunction + 108
6 libSystem.B.dylib 0x9002b908 pthreadbody + 96
Thread 6:
0 libSystem.B.dylib 0x9001f48c select + 12
1 com.apple.CoreFoundation 0x907f1240 __CFSocketManager + 472
2 libSystem.B.dylib 0x9002b908 pthreadbody + 96
Thread 7:
0 libSystem.B.dylib 0x9002bfc8 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x90030aac pthreadcondwait + 480
2 com.apple.Foundation 0x92bfd644 -[NSConditionLock lockWhenCondition:] + 68
3 com.apple.Syndication 0x9a3c926c -[AsyncDB _run:] + 192
4 com.apple.Foundation 0x92bf64d8 forkThreadForFunction + 108
5 libSystem.B.dylib 0x9002b908 pthreadbody + 96
Thread 0 crashed with PPC Thread State 64:
srr0: 0x0000000090b9e138 srr1: 0x100000000000d030 vrsave: 0x0000000000000000
cr: 0x24422202 xer: 0x0000000000000000 lr: 0x0000000090b9e110 ctr: 0x0000000090b9e100
r0: 0x0000000000000000 r1: 0x00000000bfffd470 r2: 0x00000000048a2000 r3: 0x0000000003149200
r4: 0x00000000000001c0 r5: 0x0000000041001ef4 r6: 0x00000000bfffd500 r7: 0x0000000000000009
r8: 0x00000000bfffd5d0 r9: 0x0000000000000000 r10: 0x00000000907be914 r11: 0x00000000a193c5f0
r12: 0x0000000090b9e100 r13: 0x00000000a193f818 r14: 0x0000000000000000 r15: 0x0000000000000000
r16: 0x0000000003113fe0 r17: 0x0000000024028212 r18: 0x00000000089114b0 r19: 0x0000000000000000
r20: 0x0000000003149200 r21: 0x00000000bfffd6c0 r22: 0x0000000000000009 r23: 0x00000000ddddddd2
r24: 0x00000000eeeeeee1 r25: 0x00000000bfffd5d0 r26: 0x0000000002819a18 r27: 0x0000000000003ff7
r28: 0x00000000bfffd6c0 r29: 0x0000000000000009 r30: 0x00000000458a3ef4 r31: 0x0000000090b9e110
Binary Images Description:
0x1000 - 0x355fff com.apple.Safari 4.1.3 (4533.19.4) /Applications/Safari.app/Contents/MacOS/Safari
0x3b6000 - 0x3b6fff libgild.dylib /Library/Google/Frameworks/Gild.framework/Resources/libgild.dylib
0x3ba000 - 0x3befff com.google.Gild Framework 1.0.0 (1.0.0.249) /Library/Google/Frameworks/Gild.framework/Versions/A/Gild
0x505000 - 0x681fff com.apple.JavaScriptCore 4533.19 (4533.19.1) /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
0x6d9000 - 0x7c7fff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x1008000 - 0x1109fff com.apple.WebKit 4533.19 (4533.19.4) /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x11b0000 - 0x1452fff com.apple.QuartzCore 1.4.13 /System/Library/PrivateFrameworks/Safari.framework/Frameworks/QuartzCore.framew ork/Versions/A/QuartzCore
0x14e5000 - 0x218afff com.apple.WebCore 4533.19 (4533.19.4) /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
0x27eb000 - 0x27edfff libgoogleml.dylib /Library/Google/GoogleML/GoogleML.bundle/Contents/Resources/libgoogleml.dylib
0x3069000 - 0x3072fff com.google.Desktop.SafariSearchResultsMod 1.7.0 (1.7.0.1877) /Library/Google/GoogleML/Modules/SafariSearchResults.googleml/Contents/MacOS/Sa fariSearchResults
0x307a000 - 0x3086fff com.google.Desktop.SafariWebHistoryMod 1.7.0 (1.7.0.1877) /Library/Google/GoogleML/Modules/SafariWebHistory.googleml/Contents/MacOS/Safar iWebHistory
0x8fe00000 - 0x8fe52fff dyld 46.16 /usr/lib/dyld
0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x9021b000 - 0x90268fff com.apple.CoreText 1.0.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x90293000 - 0x90344fff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x90373000 - 0x9072efff com.apple.CoreGraphics 1.258.85 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x907bb000 - 0x90895fff com.apple.CoreFoundation 6.4.11 (368.35) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x908de000 - 0x908defff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x908e0000 - 0x909e2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x90a3c000 - 0x90ac0fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x90aea000 - 0x90b5cfff com.apple.framework.IOKit 1.4 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90b72000 - 0x90b84fff libauto.dylib /usr/lib/libauto.dylib
0x90b8b000 - 0x90e62fff com.apple.CoreServices.CarbonCore 681.19 (681.21) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x90ec8000 - 0x90f48fff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x90f92000 - 0x90fd4fff com.apple.CFNetwork 4.0 (129.24) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x90fe9000 - 0x91001fff com.apple.WebServices 1.1.2 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
0x91011000 - 0x91092fff com.apple.SearchKit 1.0.8 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x910d8000 - 0x91101fff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x91112000 - 0x91120fff libz.1.dylib /usr/lib/libz.1.dylib
0x91123000 - 0x912defff com.apple.security 4.6 (29770) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x913dd000 - 0x913e6fff com.apple.DiskArbitration 2.1.2 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x913ed000 - 0x913f5fff libbsm.dylib /usr/lib/libbsm.dylib
0x913f9000 - 0x91421fff com.apple.SystemConfiguration 1.8.3 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x91434000 - 0x9143ffff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x91444000 - 0x914bffff com.apple.audio.CoreAudio 3.0.5 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x914fc000 - 0x914fcfff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x914fe000 - 0x91536fff com.apple.AE 312.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
0x91551000 - 0x91623fff com.apple.ColorSync 4.4.13 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x91676000 - 0x91707fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x9174e000 - 0x91805fff com.apple.QD 3.10.28 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x91842000 - 0x918a0fff com.apple.HIServices 1.5.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x918cf000 - 0x918f0fff com.apple.LangAnalysis 1.6.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x91904000 - 0x91929fff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
0x9193c000 - 0x9197efff com.apple.LaunchServices 183.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
0x9199a000 - 0x919aefff com.apple.speech.synthesis.framework 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x919bc000 - 0x91a02fff com.apple.ImageIO.framework 1.5.9 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x91a19000 - 0x91ae0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x91b2e000 - 0x91b43fff libcups.2.dylib /usr/lib/libcups.2.dylib
0x91b48000 - 0x91b66fff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x91b6c000 - 0x91c23fff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJP2.dylib
0x91c72000 - 0x91c76fff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x91c78000 - 0x91ce2fff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRaw.dylib
0x91ce7000 - 0x91d02fff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x91d07000 - 0x91d0afff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x91e19000 - 0x91e57fff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x91e5e000 - 0x91e5efff com.apple.Accelerate 1.2.2 (Accelerate 1.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x91e60000 - 0x91f45fff com.apple.vImage 2.4 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x91f4d000 - 0x91f6cfff com.apple.Accelerate.vecLib 3.2.2 (vecLib 3.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x91fd8000 - 0x92046fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x92051000 - 0x920e6fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x92100000 - 0x92688fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x926bb000 - 0x929e6fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x92a16000 - 0x92b04fff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x92b07000 - 0x92b8ffff com.apple.DesktopServices 1.3.7 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x92bd0000 - 0x92e03fff com.apple.Foundation 6.4.12 (567.42) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x92f36000 - 0x92f54fff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x92f5f000 - 0x92fb9fff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x92fd7000 - 0x92fd7fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x92fd9000 - 0x92fedfff com.apple.ImageCapture 3.0 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x93005000 - 0x93015fff com.apple.speech.recognition.framework 3.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x93021000 - 0x93036fff com.apple.securityhi 2.0 (203) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x93048000 - 0x930cffff com.apple.ink.framework 101.2 (69) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x930e3000 - 0x930eefff com.apple.help 1.0.3 (32) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x930f8000 - 0x93126fff com.apple.openscripting 1.2.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x93140000 - 0x9314ffff com.apple.print.framework.Print 5.2 (192.4) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x9315b000 - 0x931c1fff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x931f2000 - 0x93241fff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x9326f000 - 0x9328cfff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x9329e000 - 0x932abfff com.apple.CommonPanels 1.2.2 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x932b4000 - 0x935c2fff com.apple.HIToolbox 1.4.10 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x93712000 - 0x9371efff com.apple.opengl 1.4.7 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x93723000 - 0x93743fff com.apple.DirectoryService.Framework 3.3 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x93797000 - 0x93797fff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x93799000 - 0x93dccfff com.apple.AppKit 6.4.10 (824.48) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x94159000 - 0x941cbfff com.apple.CoreData 91 (92.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x94204000 - 0x942c9fff com.apple.audio.toolbox.AudioToolbox 1.4.7 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x9431c000 - 0x9431cfff com.apple.audio.units.AudioUnit 1.4 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x94528000 - 0x94565fff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib
0x9456d000 - 0x945bdfff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x945c6000 - 0x945dffff com.apple.CoreVideo 1.4.2 /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x94678000 - 0x946b0fff com.apple.vmutils 4.0.0 (85) /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x946f5000 - 0x94711fff com.apple.securityfoundation 2.2 (27710) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x94725000 - 0x94769fff com.apple.securityinterface 2.2 (27692) /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x9478d000 - 0x9479cfff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
0x947a4000 - 0x947b1fff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x947f7000 - 0x94810fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x94c32000 - 0x94ca3fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
0x94d41000 - 0x94d4dfff com.apple.framework.Apple80211 4.2.9 (429.6) /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
0x94e19000 - 0x94f49fff com.apple.AddressBook.framework 4.0.6 (490) /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x94fdc000 - 0x94febfff com.apple.DSObjCWrappers.Framework 1.1 /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWra ppers
0x94ff3000 - 0x95020fff com.apple.LDAPFramework 1.4.1 (69.0.1) /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
0x95027000 - 0x95037fff libsasl2.2.dylib /usr/lib/libsasl2.2.dylib
0x9503b000 - 0x9506afff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
0x9507a000 - 0x95097fff libresolv.9.dylib /usr/lib/libresolv.9.dylib
0x95b4d000 - 0x95b7ffff com.apple.PDFKit 1.0.4 /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
0x97ce5000 - 0x97db6fff com.apple.QuartzComposer 1.2.6 (32.25) /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer
0x97e33000 - 0x97e33fff com.apple.quartzframework 1.0 /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz
0x9a3c6000 - 0x9a3fcfff com.apple.Syndication 1.0.8 (56.1) /System/Library/PrivateFrameworks/Syndication.framework/Versions/A/Syndication
0x9ffe4000 - 0x9fff6fff com.apple.SyndicationUI 1.0.8 (56.1) /System/Library/PrivateFrameworks/SyndicationUI.framework/Versions/A/Syndicatio nUI
Model: PowerMac8,2, BootROM 5.2.5f1, 1 processors, PowerPC G5 (3.1), 2 GHz, 1.5 GB
Graphics: ATI Radeon 9600, ATY,RV351, AGP, 128 MB
Memory Module: DIMM0/J4000, 1 GB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM1/J4001, 512 MB, DDR SDRAM, PC3200U-30330
AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
Modem: Jump, V.92, Version 1.0
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD2500JD-40HBC0, 232.89 GB
Parallel ATA Device: MATSHITADVD-R UJ-845
USB Device: Keyboard Hub, Apple, Inc., Up to 480 Mb/sec, 500 mA
USB Device: Apple Keyboard, Apple, Inc, Up to 1.5 Mb/sec, 100 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Mitsumi Electric, Up to 1.5 Mb/sec, 500 mA
FireWire Device: iSight, Apple Computer, Inc., Up to 400 Mb/secHi,
I can NOT open my safari and lots of application in my Mac.
The startup disk may need repairing. Launch the Disk Utility app (Applications/Utilities) Select MacintoshHD in the panel on the left. Then select the FirstAid tab.
Click: Verify Disk (not Verify Disk Permissions). If the disk needs repairing, follow these instructions. You will need your install disc.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your startup disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 15% free space.
Until you verify and repair the startup disk if necessary, it won't do much good to troubleshoot the Safari crash report.
Carolyn -
Initial Faces scan skips lots and lots of photos
I have over 5000 photos. My initial scan took about 30 minutes. I thought it was fast, now I realize it was TOO fast - lots and lots, I'd guess over 50%, of photos were skipped.
When I look at the photos, some have boxes around the faces but most do not. It skipped even extremely clear, front view, unobstructed faces.
I took the advice of others here and deleted the "faces" files within the iPhoto package and restarted. Again the scan was really fast but flawed - I saw the same result with lots of photos seemingly skipped.
I verified by taking some photos that had NO face recognized (high quality - closeup, unobstructed front view of a child). I exported them, then re-imported into iPhoto. On importing, it did find all the faces.
This proves to me that the initial scan is FLAWED and skipping photos. If it found a face on re-importing, it should have found a face initially.
I see other people here are seeing the same behavior. Comforting to know that I'm not alone, but VERY frustrating. I don't want to take days and days to draw my own boxes around faces if there's a chance that Apple will release a fix for this.My initial scan failed (as in not one single face box inserted). I deleted the files and started it over, and it seemed to work okay. No, it didn't get every face, but it did quite a few.
But then I imported a large number of new photos, thinking I should finally consolidate my numerous photo libraries on separate computers... and iPhoto didn't find faces in those either.
It seems like if I import a small number of photos (<200 as an estimate) it does scan them, but any more than that and it screws up. -
My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/r:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
11.5.10 ROI를 통해 SERIAL AND LOT CONTROLLED ITEMS을 처리하는 방법
제품: Applications
작성날짜 : 2006-05-30
11.5.10 ROI를 통해 SERIAL AND LOT CONTROLLED ITEMS을 처리하는 방법
========================================================
PURPOSE
11.5.10 Receiving Open Interface(ROI)를 통해 Serial and Lot Controlled Items을 처리하기 위해 어떤 interface table들이 사용되는지에 대해 기술함.
Explanation
the Receiving Open Interface (ROI)를 통해 Serial and Lot Controlled Items에 대한 Delivery, Correction, Return등의 process를 수행하기 위해서는 다음 table들에 data가 존재하여야 합니다.
- rcv_headers_interface
- rcv_transactions_interface
- mtl_transaction_lots_interface
- mtl_transaction_serial_numbers_interface
<참고>
이와 같은 기능은 11.5.10/11i.SCM_PF.J/11i.PRC_PF.J 에서 제공되는 신기능으로써 이전 version으로의 backport는 불가능합니다.
Example
1) If Item is Serial Controlled only:
INSERT INTO MTL_SERIAL_NUMBERS_INTERFACE (
TRANSACTION_INTERFACE_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
FM_SERIAL_NUMBER,
TO_SERIAL_NUMBER,
PRODUCT_CODE,
PRODUCT_TRANSACTION_ID) --link to rcv_transactions_interface
VALUES
(MTL_MATERIAL_TRANSACTIONS_S.NEXTVAL,
sysdate,
1,
sysdate,
1,
1,
'sr000016',
'sr000016',
'RCV',
RCV_TRANSACTIONS_INTERFACE_S.CURRVAL); --same as
rcv_transactions_interface.interface_transaction_id
2) If Item is Lot Controlled only:
INSERT INTO MTL_TRANSACTION_LOTS_INTERFACE (
TRANSACTION_INTERFACE_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
LOT_NUMBER,
TRANSACTION_QUANTITY,
PRIMARY_QUANTITY,
PRODUCT_CODE,
PRODUCT_TRANSACTION_ID) --link to rcv_transactions_interface
VALUES
(MTL_MATERIAL_TRANSACTIONS_S.NEXTVAL,
sysdate,
1,
sysdate,
1,
1,
'lt2002',
1,
1,
'RCV',
RCV_TRANSACTIONS_INTERFACE_S.CURRVAL); --same as
rcv_transactions_interface.interface_transaction_id
3) If Item is both Serial and Lot Controlled:
INSERT INTO MTL_SERIAL_NUMBERS_INTERFACE (
TRANSACTION_INTERFACE_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
FM_SERIAL_NUMBER,
TO_SERIAL_NUMBER,
PRODUCT_CODE,
PRODUCT_TRANSACTION_ID) --link to rcv_transactions_interface
VALUES
(MTL_MATERIAL_TRANSACTIONS_S.NEXTVAL,
sysdate,
1,
sysdate,
1,
1,
'sr000016',
'sr000016',
'RCV',
RCV_TRANSACTIONS_INTERFACE_S.CURRVAL); --same as
rcv_transactions_interface.interface_transaction_id
INSERT INTO MTL_TRANSACTION_LOTS_INTERFACE (
TRANSACTION_INTERFACE_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
LOT_NUMBER,
TRANSACTION_QUANTITY,
PRIMARY_QUANTITY,
SERIAL_TRANSACTION_TEMP_ID, --link to mtl_serial_numbers_interface
PRODUCT_CODE,
PRODUCT_TRANSACTION_ID) --link to rcv_transactions_interface
VALUES
(MTL_MATERIAL_TRANSACTIONS_S.NEXTVAL,
sysdate,
1,
sysdate,
1,
1,
'lt2002',
1,
1,
MTL_MATERIAL_TRANSACTIONS_S.CURRVAL, --link to mtl_serial_numbers_interface
'RCV',
RCV_TRANSACTIONS_INTERFACE_S.CURRVAL); --same as
rcv_transactions_interface.interface_transaction_id
Reference Documents
Note#301281.1hi
enable Readahead from systemd
https://wiki.archlinux.org/index.php/Systemd#Readahead
# systemctl enable systemd-readahead-collect systemd-readahead-replay -
IPod Touch 2.0.1 Reboots and shuts down randomly
I have an 8gb iPod touch on the 2.0.1(5b108) firmware that now reboots and shuts down randomly while just sitting idle. I've tried restoring and resetting and it still does this. In terms of the shutting down randomly it seems like my hold button is sticking or broken, but I can't explain the random restarting. This has only been happening since I updated to 2.0.1. Any advice?
As posted before as m9performance but the forum would not let me logo on as that.
This has been going on for some time now Apple was to fix this problem with the 2.0 update absolute rubbish it is now worse that before just turning it self off and resetting it self e.g. tonight from 17-30h to 18-45h it did this 3 soddin times.
Where as before it would be about once every 3 weeks or monthly it is about time Apple started to honour their customers with a product that works e.g. it dose what it says on the box and plays music until the customer tells it not to.
Come on Apple fix up and fix your product lots of people have mp3 players with out the touch problems like I have said before never mind bringing out a new bigger one 32G get the old ones working first. At the end of the day it is down to YOU Apple and not for the users to have to keep posting the same problems hoping that you as a company decide to fix your mistakes and eventually look after your customers. -
Why does RoboHelp 8.0.2 randomly insert javascript into all WebHelp topics?
RH can randomly insert javascript into your project (can be in the <head> tag or <body> tag in all topics in the project) which evidences itself with red boxes in the editing pane, and duplicate breadcrumb links in the WebHelp output. Even if you clear the Add Breadcrumbs Links checkbox while setting your project's properties, you will still have some breadcrumbs in various topics (RH randomly assigns breadcrumbs to topics with no logic that I can see). After deleting all instances of the red boxes, RH inserted javascript again in the next compile.
When you click the HTML tab you will see something similar to the following (the javascript has been highlighted):
I was able to recover to a previous version (without RH's random destruction) b/c I used SVN, but I now have zero confidence in RH's stability. I definitely did not insert the above javascript into my project. I kept the default setting for the compiled help to go to the subfolder of the help system (i.e., !SSL!, WebHelp). Does anyone know why this happened?I'm not sure if this is the same issue, but it sounds close enough that I'd like to post it here...
Issue
I was either getting topic breadcrumbs in all of my topics (when they shouldn't have been), or getting "double" breadcrumbs (one stacked on top of the other) when I only should have had one breadcrumb. However, I didn't want any!
Background
By the time I had inherited this RH project (WebHelp), it had been worked on by at least three people over five years, using older (pre-9.0) versions of RH. I had just loaded RH ver. 9 when I took it over.
Solution
I noticed that there was a "breadcrumb" placeholder in the master page (xxxxx.htt) of the project. In the Single Source tab, when I right-clicked on WebHelp (Primary Output), and did not check the "Add breadcrumbs links" under the Navigation pane, I only saw one breadcrumb link in my generated output. When I checked the "Add breadcrumbs links", I saw two breadcrumb links in my generated output. When I deleted the "breadcrumb" placeholder in the master page (xxxxx.htt) of the project and did not check the "Add breadcrumbs links" under the Navigation pane in the WebHelp (Primary Output), then I finally saw no breadcrumbs in my generated output. Likewise, when the "Add breadcrumbs links" was checked, one breadcrumb was generated in the topic.
Lessons Learned
I suspect that either an earlier version of RH did not have this "Add breadcrumbs links" under the Navigation pane when you generated output (which mean that an earlier RH author had to use the breadcrumbs via the "placeholder" feature on the master page), or someone just didn't know how to implement the "breadcrumbs" feature correctly. In either case, I'm a little wiser from all of this! -
Using Cursor and FOR LOOP to INSERT the data into table
Hi all,
I have SELECT statement that returns 3 rows:
PROCESSNAME
PROTDATE
IMM
2013-12-18
Metrology
2013-11-18
CT
2013-12-04
SELECT processName, MAX(NVL(protStartDate, protCreateDate)) AS protDate
FROM TABLE(SEM_MATCH("{
?ipc rdf:type s:Protocol .
?ipc s:protocolNumber ?protNum .
?ipc s:protocolCreateDate ?protCreateDate .
OPTIONAL {?ipc s:protocolSchedStartDate ?protStartDate }
?ipra rdf:type s:ProcessAggregate .
?ipra s:hasProtocol ?iprot .
?iprot s:protocolNumber ?protNum .
?ipra s:processAggregateProcess ?processName.
}",sem_models("PROTS", "LINEARS"),NULL, SEM_ALIASES(SEM_ALIAS("","http://VISION/Data/SEMANTIC#"),SEM_ALIAS("s","http://VISION/DataSource/SEMANTIC#")),NULL))
Group by processName
Now I need to INSERT these values into the table along with the other values.
these other values come from different table.
INSERT INTO MODEL_CLASS_COUNTS (MODEL_NAME, CLASS_NAME, INS_COUNT, COUNT_DATETIME, PROCESS_NAME, PROT_DATE)
VALUES
("$MODEL",
"${i}",
(SELECT COUNT (DISTINCT S) FROM TABLE(SEM_MATCH(
"{?s rdf:type :${i} . }",SEM_Models("$MODEL"),NULL, SEM_ALIASES(SEM_ALIAS("","http://VISION/DataSource/SEMANTIC#")),NULL))),
SYSTIMESTAMP, %%here need to insert PROCESSNAME, PROTDATE%%
t was giving me error:
PL/SQL: ORA-22905: cannot access rows from a non-nested table item
so i enclosed sparql query into single quotes.
The code is as follows:
declare
type c_type is REF CURSOR;
cur c_type;
v_process varchar2(200);
v_pdate varchar2(200);
begin
open cur for
' SELECT processName, MAX(NVL(protStartDate, protCreateDate)) AS protDate <-- it's complaining about this being too long identifier, i think...
FROM TABLE
(SEM_MATCH (
?ipc rdf:type s:Protocol .
?ipc s:protocolNumber ?protNum .
?ipc s:protocolCreateDate ?protCreateDate .
OPTIONAL {?ipc s:protocolSchedStartDate ?protStartDate }
?ipra rdf:type s:ProcessAggregate .
?ipra s:hasProtocol ?iprot .
?iprot s:protocolNumber ?protNum .
?ipra s:processAggregateProcess ?processName.
}",SEM_Models("XCOMPASS", "XPROCESS"),NULL,
SEM_ALIASES(SEM_ALIAS("","http://VISION/Data/SEMANTIC#"),
SEM_ALIAS("s", "http://VISION/DataSource/SEMANTIC#")),NULL))
Group by processName';
loop
fetch cur into v_process, v_pdate;
exit when cur%NOTFOUND;
--here I need to insert v_process , v_pdate into my table along with other values...
dbms_output.put_line('values for process and prod_date are: ' || v_process || v_pdate );
end loop;
close cur;
end;
exit;
Now, I get an error:
ORA-00972: identifier is too long
Does anyone know way around this?Hi,
I tested something similar with insert into select and it worked fine :
insert into t_countries(ID,CITY ,POPULATION, DESCRIPTION, located, insdate )
SELECT 1 id, city, o , city||' is a nice city' description, max(nvl(locatedAt,'unknown')) as located,
SYSTIMESTAMP
FROM TABLE(SEM_MATCH(
'{GRAPH :gCH {<http://www.semwebtech.org/mondial/10/countries/CH/> :hasCity ?cityID .
?cityID :name ?city .
OPTIONAL{?cityID :locatedAt ?locatedAt .}
?cityID :population ?o .
SEM_Models('VIRT_MODEL_MONDIAL'),
SEM_Rulebases(null),
SEM_ALIASES(SEM_ALIAS('','http://www.semwebtech.org/mondial/10/meta#'),
SEM_ALIAS('prv','http://www.semwebtech.org/mondial/10/countries/CH/provinces/')
null))
group by city,o
order by city;
Or with execute immediate :
declare
v_country varchar2(200) :='http://www.semwebtech.org/mondial/10/countries/F/';
v_text varchar2(2000);
begin
v_text := 'insert into t_countries(ID,CITY ,POPULATION, DESCRIPTION, located, insdate )
SELECT 1 id, city, o , city||'' is a nice city'' description, max(nvl(locatedAt,''unknown'')) as located,
SYSTIMESTAMP
FROM TABLE(SEM_MATCH(
''{<'||v_country||'> :hasCity ?cityID .
?cityID :name ?city .
OPTIONAL{?cityID :locatedAt ?locatedAt .}
?cityID :population ?o .
SEM_Models(''VIRT_MODEL_MONDIAL''),
SEM_Rulebases(null),
SEM_ALIASES(SEM_ALIAS('''',''http://www.semwebtech.org/mondial/10/meta#'') ),
null))
group by city,o
order by city';
dbms_output.put_line(v_text);
delete from t_countries;
execute immediate v_text ;
commit;
end;
Marc -
New OSX not does not work with RED Rocket Card and old OSX Randomly Logs Out - UNSTABLE
It looks like my MBPR 16GB (MacBook Pro) randomly logs out and causes my programs to quit unsaved. I can not update to the new OSX mountain Lion because the new Apple release is no longer compatible with the RED Rocket card needed for debaying RED Scarlet footage. Mountain Lion causes the RED Rocket to not run correctly with Adobe Premiere.
At the same time, I am on Lion and my computer randomly logs me out and I lose all my work. It seems as though the Retina is unstable.
Any help would be greatly appreciated. Can someone tell me how I can return this. It seems as though I may have to switch the entire company over to PC if this is not figured out soon.You probably have not received responses for two reasons.
1. There are not many here that know what this is "RED Rocket card needed for debaying RED Scarlet footage"
2. Your post appears to contain some sort of threat to Apple about moving to PCs. You are not addressing Apple here. We are users just like you. We don't care if you change over to PCs.
MBPs and Lion are very stable. Maybe your unsupported third party Red card is causing issues. Their answer seems to be that Mountain Lion is not supported. I wonder why?
My suggestion if this is a business environment is to not mess with this. If you know for a fact that your Red card works with PCs, change over to PCs. I know that if some tool was not working for my business I would not hesitate to get something that worked.
Maybe you are looking for
-
GPO to disable hibernation on Windows 7 not working
We have set a power plan for Windows 7 with sleep and hibernate after set to "0." This works to the extent that the machines stay running online all day and never sleep or hibernate automatically. However, hibernation is not truly disabled because th
-
Installing CAD 7.5(8) on Windows 7
I'm trying to install CAD 7.5(8) on Windows 7. This version is supposed to be compatible with Windows 7. However, when I try to install I get the following error: File 'sllapi.dll' can not be found. Make sure the file is on target system or instal
-
Hello. I'm building an application for mobile phones that should get data from an mySQL database. I would like to know what's the simplest way to do this. The database will be very small. Can I do this directly, doing a query to the database or I hav
-
Hi All, The requirement is to add a hyperlink in se61 email text and this text is added in config to send the emails. How do i add a hyperlink in the se61 editor..tried <a href= "">Text</a> but it gives a syntax error for </a>. Please suggest. Thanks
-
The deployment has not been installed.
hi am trying to instal jstl library in my WebLogic Server Version: 10.3.6.0,am geting this error The deployment has not been installed. Message icon - Error weblogic.management.ManagementException: [Deployer:149105]An attempt was made to deploy a lib