Ip 5 do not connect to 4G LTE

My ip5 can't connect to 4G LTE network
Not show 4G
Sim 4G CELCOM

Does the carrier actually provide LTE coverage?
Is the carrier one of the supported carriers listed here: https://www.apple.com/iphone/LTE/ ?  If not, there is no guarantee it will ever work.

Similar Messages

  • My iPhone 5S has not connected to 4G LTE service in the last few days? Is there an outage/issue with 4G in my area (Pittsburgh) or is this a device specific issue?

    My iPhone 5S has not connected to 4G LTE service in the last few days? Is there an outage/issue with 4G in my area (Pittsburgh) or is this a device specific issue?

        JHblues Let's get your data working again. There are not any reported issues in the area. Try this step:  http://vz.to/1kUSSk2
    Sheritah_vzw
    Follow us on Twitter
    @VZWSupport

  • My iPhone 5S will not connect to LTE

    So I have had the phone for a couple of days and I have found that the phone does not connect to LTE, I checked the data and I'm not even getting 7mbps, so I know its not LTE speeds. I have tried to reset the network settings and also turned the phone off and back on also taken out the sim card. I'm currently lost do I have a bad phone, this phone is supposed to be picking up LTE signals correct it is running IOS 7.0.1. Please help!

    I faced exactly the same issue. But I figured out the issue atleast for my case.
    When I upgraded from my old phone to the new iphone ATT did not update my IMEI number.
    So had to call the help desk and request them to update the account to the new IMEI no of my iphone. Since then works like a charm.
    Ohh and btw a lot of retards from ATT don't know about this is the solution had to do extensive research (All Hail Google)
    Hope this fixes your issue.

  • Why would my iPhone not connect to my macbook air?

    Why would my iphone not connect to my MacBook Air?

    Which iPhone model do you have?
    Are you in an area where you carrier has good LTE network coverage?

  • Why does the "find my iphone" ap say i'm not connected to the internet when i clearly am?

    I can see web pages, update facebook status, tweet, etc. but this ap says i'm not connected to the internet (wifi and Verizon LTE).  Also, why does the podcast ap say its unable to authorize to automatically update my podcasts (which automatically download to my mac book pro every day without a problem)?

    Go here:
    Settings > iTunes & App Stores > tap your Apple ID: > View Apple ID > Country/Region
    and confirm that it's set to the correct country for your account. If it is, try signing out of your account and back in.
    Hope this helps.

  • After downloading IOS 8.0.2 I can not connect to the internet, any solutions?

    After downloading IOS 8.0.2 I can not connect to the internet, any solutions?

    It is not the wording but the lack of detail.
    The iPhone connects to both the phone network (3G, LTE, etc) and to WiFi networks.  Which one (or both) are you having issues with?
    If it is the phone network, go to Settings->Cellular and see if Cellular data is turned on globally AND for the apps you wish to use.
    If it is a WiFi network, go to Settings->Wi-Fi and see if you are connected to a network.  If so, touch the circled "i" next to the network name and see that you have a valid IP address, etc. (take a screen shot and post it if you don't know what to look for).

  • My HTC One m8 is not connecting to the mobile data network.

    WiFi works, I can make phone calls, but I can't access internet at all while not connected to WiFi. yes, mobile data is on (but disconnected). I've tried LTE, CDMA, Global, and no available network mode works at all. Please help =(

        Hi patient.zer0!
    Sorry for any trouble with your data. Let's look into this OK? Please turn on your mobile data and try again to access the internet. When accessing the internet, either Wifi or VZW data has to be turned on.
    Let me know how this goes, thanks!
    ChristinaB_VZW
    Follow us on Twitter @VZWSupport

  • "health data" data points do not connect

    The data point I have entered for things like blood pressure, heart rate, etc., do not connect. I have seen them connected in demos, ads, etc., so I'm wondering why the ones I have entered are not connecting. Any ideas?
    Sorry for the community selection. I couldn't find an appropriate one.
    Thanks.

    Respectfully, do you have anything to add here? Everybodies opinion has some merit but all you seem to do is throw out negative comments and detract from what the rest of us are trying to do here.
    Verizon are billing customers for data they can't or won't explain, That is the  the problem. If you are happy with being billed  hundreds of megabytes in overage and it doesn't effect you, great, go be happy.
    For others that do care and professionals like myself who work on the move, These overrages cost me over $1000 per month in unexplained charges. Maybe they are valid, maybe they are not but the point is that right now there is no accountability,
    Over the weekend I ran exactly the same length skype call through both my IPhone thether (AT&T) and my Verizon 4G LTE wireless hotspot. AT&T data usage showed 30 mb (within a few megabytes of the in/out traffic to the MAC address). Verizon billed be 500mb for the same duration call with a comparable amount of in/out traffic to it's MAC address. Clearly something stinks here
    Update for everybody else ...
    I am still waiting for Verizon customer support to get back to me. Amusingly, they blocked one of my threads in less than 24 hours because they didn't like what I had to say about their service but it's been 5 days and I still haven't heard back about this issue.
    The solution to this problem is now obvious to me - don't do business with Verizon, As great as their service could be it is unusable until Verizon address their data usage fees, something they seem unwilling to explain and unable to address.
    Steve

  • What do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet

    what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network

    My 2nd gen works fine with WPA2 and AES encryption.
    You may need to go back and start over.  Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

  • ITunes could not connect to the iTunes Store "Error Message"

    I recently added iTunes 7.6 to my Windows XP operating system at the same time when I added an *Ion USB Turntable (TTUSB).* I currently have the 80G iPod with the larger video screen. I added in the supplied software of the EZ Vinyl Converter. The software reads from Gracenote and imports into iTunes okay. But now my PC cannot access the iTunes store to buy songs, read the tracks on the discs, or display new album artwork. The diagnostic read the network connectivety test, the CD/DVD drive, and iPod connectivity tests all read okay. I followed the directions on checking the network settings under the Internet Options Tool "Connections" Lan Settings and the Automatic detection and still no dice. All I get is "Make sure your network is active."
    Can anybody help out their?
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    HP Pavilion 061 ED842AA-ABA M7250N
    iTunes 7.6.2.9
    QuickTime 7.5
    CD Driver 2.0.7.3
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 1.1.4.7
    Bonjour 1.0.4.12 (118.4)
    iTunes Serial Number 425XXXXXXXXXXXXX
    Current user is an administrator.
    The current local date and time is 2008-07-06 01:07:54.
    iTunes is not running in safe mode.
    Video Display Information
    RADEON X300 Series
    RADEON X300 Series Secondary
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {1C6FC80D-7300-43A2-A78B-9DFA93BF7727}
    Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
    IP Address: XXXXXXXXXXXX
    Subnet Mask: XXXXXXXXXXXX
    Default Gateway: XXXXXXXXXX
    DHCP Enabled: Yes
    DHCP Server: XXXXXXXXXX
    Lease Obtained: Sun Jul 06 01:02:58 2008
    Lease Expires: Sun Jul 06 02:02:58 2008
    DNS Servers: 66.51.205.100
    66.51.205.100
    66.51.206.100
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Disabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    iTunes has never successfully accessed iTunes store.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.7.3),
    E: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.03
    Audio CD in drive.
    Found 12 songs on CD, playing time 39:58 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 04:18:00
    Track 3, start time 07:16:25
    Track 4, start time 11:23:70
    Track 5, start time 15:23:17
    Track 6, start time 20:15:17
    Track 7, start time 23:04:67
    Track 8, start time 26:10:40
    Track 9, start time 28:59:05
    Track 10, start time 31:31:42
    Track 11, start time 33:32:32
    Track 12, start time 37:03:57
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 10 16 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    ** iPod/iPhone Connectivity Tests **
    iPodService 7.6.2.9 is currently running.
    iTunesHelper 7.6.2.9 is currently running.
    Apple Mobile Device service 1.14.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7
    Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD
    Intel(R) 82801GB USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801GB USB2 Enhanced Host Controller - 27CC. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Connected Device Information:
    HP_ADMINIST (L:\), Fifth Generation iPod (iPod with video) running firmware version 1.3
    Serial Number: 8K645xxxV9R
    Bus Speed: 61440

    I'm seeing this error on some, but not all, of my Windows XP machines. On my personal development XP box, I see this error if iTunes is closed when I try and access iTunes U via my transfer script or Stanford's.
    "iTunes could not connect to the Music Store. The network connection was terminated unexpectedly. Make sure your network connection is active and try again."
    The errors occured in IE 7 Beta, Firefox 1.5.x, and Firefox 2 Beta. In each case, iTunes U loaded after I clicked the 'ok' button in iTunes. I did notice that in Firefox's case an additional pop-up window appeared that asked whether or not I had iTunes; when I selected that I do have itunes, it transfered me to iTunes but generated the error.
    After getting these errors on my Windows XP machine, I tried it on two different lab machines running Windows XP, and didn't get the error message once -- I tried it in IE 6, Firefox 1.0.x and Firefox 1.5.x and they all worked. It even worked with IE 7 Beta and Vista Beta.
    Based on this, I think the problem must lie in how Windows registered iTunes, and the handshake just isn't happening properly.
    Ken Newquist
    Lafayette College

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Please take the Mac to  Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • I need to upgrade my 10.5.1 os on my G4/1.25 (I'm having some audio-midi setup problems), but it's a machine that is not connected to the internet.  Do I have any options?  Thanks!

    Friends,
    I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine.  I'm thinking that a routine OS upgrade might help.  However, this machine is not connected to the internet.  Are there any alternate methods for upgrading system software?  Thanks in advance!

    OK, what you should do is download the updates on another machine and burn them to a disc.  Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates.  Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install.  Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
    My suggestion is this: if it looks like you might need a download, get it onto that disc.

  • Win 7 Pro not connecting to remote Win 7 pro via port 3389

    I have a new Dell XPS 8700 Win Pro 64 bit that will not connect to work machine of same specs, i.e, XPS 8700 Win 7 Pro. Ironically an old lap top running XP Pro
    will connect to work computer. I have a new Dell laptop with Win 8.1 pro that will not connect either.  I tried everything, uninstalled Symantec End point, shut off the Windows Firewall, did a complete
    hardware check via Dell Diagnostics, made sure network discovery was on as well as all remote services, turned on RD, changed every setting on the  RD dialog box, pinged the external IP and it timed out. None of the forums seem to have an answer and I
    am at wits end. I set up 15 machines at work under Win 7 for RD and all are working with Win 7 Pro.

    Hello Al Wayne,
    What is your current situation?
    Please share us more information for better analyzation as Frederik Long mentioned.
    Do you mean that the Dell XPS 8700 and laptop can’t RDP to work Windows 7 machines, but the Windows XP laptop can RDP to?
    Please take the following steps for troubleshooting:
    1. Share us the result of command ipconfig /all in the source and destination computers
    2. Check if we can ping the Windows 7 machines from the Dell XPS 8700 and laptop
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Error message "not connected to internet" when trying to sign in to BB id with Mac laptop

    I have a Mac laptop and was forced to remove the original BB Link OS when the Z10 launched.  I replaced the OS with the current one but now it doesn't allow me to use my Mac's computer name eg.  John Smith's Mac book. I can only use a single name.  I suspect that is why I'm not getting the itune's library to load.  Also, I can't sign into my BB id, I get a message that says I'm not connected to the internet.  I've taken the firewall off as I heard that was a solution with Windows but it didn't work.  Any ideas?

    i have the same problem. I have window 7 pc. I had to use internet to download link so i don't understand why it is not allowing me to use link or do set up. I uninstalled my previous bb desktop driver in hopes that would help. It didn't. I appreciate any help on this forum

Maybe you are looking for

  • My iPod doesn't play songs, and is not recognized by iTunes

    Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard

  • Have full service 3g, no wifi bluetooth

    im having a problem with my wi-fi and bluetooth. they will not connect at all. i do have full 3G network and full carrier service. but my bluetooth will not work, and my wi-fi will not work. its killing me, does anyone know what my problem is with th

  • New field in PO

    Hi friends I want to add new fields in me21n can anybuddy help me?

  • Website in Flex

    Hi, Was just wondering, I am making a website in flex and im not sure how to lay it out. How should I make each of the pages? Should I make them as states and when a user clicks a button to navigate, it changes state... or is there a better way to do

  • Kded crashes on amarok quit in gnome, cannot start jack after

    I'm running amarok in gnome and it works fine except that I'm getting the KDE crash handler telling me that kded has cashed just after I quit amarok. And amarok seems to keep holding onto hw:0, so I cannot start jack after. Which prosess could I kill