IP Address Changed on my AD - Now Authentication is not Working

I got a new service provider for my home network, and as a result their router provided a new set of IP addresses. My home network is supported by an OD running on Mac OS X Server v 10.4.11. The laptops in the house seem to be OK, but my main machine (Mac Pro) and two others can no longer authenticate, and therefore cannot be used by anyone but their local admin accounts. All of my user info came from the OD. I went through the process of changing the DNS services on the Mac Server, and it seems to be working properly. And I have removed the old LDAP Path on the client computers, and re-initiated it. But I'm not having any success. I'm guessing that the problem may be in the actual data stored in the LDAP database (since I would likely now have a new Kerberos key, but am reluctant to attempt to recreate it, for fear of losing access to critical data under my regular login accounts.
Can anyone point me to some documentation on how to handle a change of IP address on a Mac OS X server (which is my only server on this network).? I have obviously missed something - either on the server - or on the clients - or both.
Thanks,
C.

1. There are No Tickers Available (I assume that any previous ones were wiped, when I removed and then re-created the client's directory entry through the Directory Utility.)
The tickets will be generated the first time that you login to an OD server that has Kerberized services and will be used to access all services on the server that require authentication, if so configured, and will remain until you logout or the ticket expires. If you login to a client Mac as a local user and connect to the server as described previously, do you get the Kerberos login dialog, which will have the realm listed, or the standard login dialog?
2. When I try to create a new ticket, I get the dialog box, but cannot continue because the drop down for the REALM is blank.
The realm would be something on the order of, YOURSERVER.YOURDOMAIN.TLD. If the realm is not showing in Kerberos.app, then the client is not bound -or is incorrectly bound- to the server. Check your Server Admin app to see if Kerberos is running or not. Highlight the 'Open Directory' item under your server -it should show on the right as 'Running' or 'Stopped'.

Similar Messages

I never changed my password. Now it does not work. I tried "I forget password" and it says it sent email, but I receive it. At a loss of what I can do now.

I can't sign into my itunes account. Says my password is wrong. I tried the "I forget password" option, but I don't recieve the email that they said was sent. Big ?. I got to this forum by signing in. Password worked for that. What options are there for me to fix this.

Your model MacBook requires Apple or an Apple Authorized Service Provider to replace its battery. Now you know why. It will carry a one year guarantee.
$129 US

HT2534 But now , the hole process of sign uping is changed , please remove the wrong guide its not working , and why apple not let to access the free app .!!!

But now , the hole process of sign uping is changed , please remove the wrong guide its not working , and why apple not let to access the free app .!!!

Try going to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before.

I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before?

Start with B5/6 in the 1st linked article.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

I Need help. I Change My Number and now imessage don t work.

I Need help. I Change My Number and now imessage don t work.

Hi Ivonka88,
Here are some steps to try troubleshooting your issue with, depending on your specific symptoms:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers!
- Ari

I changed from windows xp to windows 8.1 now CS5 is not working. Error6. what do I have to do. Can y

I changed from windows xp to windows 8.1 now CS5 is not working. Error6. what do I have to do. Can you please help?

Thanx, I downloaded the whole CS on my computer now again. It was completely gone so it seemed. It’s working! Thank you.
Van: Ned Murphy [email protected]
Verzonden: dinsdag 15 april 2014 14:08
Aan: FEE
Onderwerp: I changed from windows xp to windows 8.1 now CS5 is not working. Error6. what do I have to do. Can y
Re: I changed from windows xp to windows 8.1 now CS5 is not working. Error6. what do I have to do. Can y
created by Ned Murphy <http://forums.adobe.com/people/Ned+Murphy> in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/6299648#6299648

Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
Dual 1.8 G5 Mac OS X (10.4.3) 1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera

I had an USA addresss in my Amex card. Now, trying to switch to a Brazilian address (where I am linving now) it does not accept. Wonder what to do?

I had an USA addresss in my Amex card. Now, trying to switch to a Brazilian address (where I am linving now) it does not accept my CC. Wonder what to do?

You cannot use a US-issued credit card with the Brazilian iTunes Store, if that's what you mean. You need a credit card issued by a Brazilian bank with a Brazilian billing address.
Regards.

I buy a iphone 5s in australia. now it is not working properly. now i am in india. it is in 5 months warrenty. can it be change in india

i buy a iphone 5s in australia. now it is not working properly. now i am in india. it is in 5 months warrenty. can it be change in india

This is correct. If you purchased the phone in the UK, then there is NO international warranty on the iPhone and the warranty is for the country of original purchase, so as well as the UK, it is EU wide.
The only way to get your phone repaired is to take it back to the UK to an Apple store there or to any other EU country where the warranty is valid.
Nothing else you can do.

MAC Authentication does not work

My MAC Authentication does not work.
I have a ACS 3.0 server set. the MAC address is set in the user name field and in the password field.
I can ping the ACS, I can ping my AP, I can ping my client.
I don't want WEP and I don't want LEAP just MAC. So I set my authentication to "Open with MAC" My client has WEP set to NO WEP and authentication to OPEN
I have the latest drivers for both AP and my 350 Client.
I see that the client is associating and disassociating back and forth non stop. My AP log is full with the following message:
Station 0009.7c9f.xxxx Authentication failed
this is my config:
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname GOM_1200IOS
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
server 10.1.2.197 auth-port 1812 acct-port 1812
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa group server radius wlccp_rad_infra
aaa group server radius wlccp_rad_eap
aaa group server radius wlccp_rad_leap
aaa group server radius wlccp_rad_mac
aaa group server radius wlccp_rad_any
aaa group server radius wlccp_rad_acct
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authentication login wlccp_infra group wlccp_rad_infra
aaa authentication login wlccp_eap_client group wlccp_rad_eap
aaa authentication login wlccp_leap_client group wlccp_rad_leap
aaa authentication login wlccp_mac_client group wlccp_rad_mac
aaa authentication login wlccp_any_client group wlccp_rad_any
aaa authorization exec default local
aaa authorization ipmobile default group rad_pmip
aaa accounting network acct_methods start-stop group rad_acct
aaa accounting network wlccp_acct_client start-stop group wlccp_rad_acct
aaa session-id common
enable secret xxxxxx
username Cisco password xxxx
ip subnet-zero
iapp standby timeout 5
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption key 1 size 40bit 7 9DF1C10BF11A transmit-key
ssid GOM_1230
authentication open mac-address mac_methods
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
rts threshold 2312
channel 2462
station-role root
no cdp enable
dot1x reauth-period server
dot1x client-timeout 600
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no cdp enable
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 172.16.43.45 255.255.240.0
no ip route-cache
ip default-gateway 172.16.47.254
ip http server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivory/1100
ip radius source-interface BVI1
access-list 700 permit 000a.b74c.e8c9 0000.0000.0000
access-list 700 permit 0009.7c9f.d6e0 0000.0000.0000
access-list 700 permit 0006.25b1.2f79 0000.0000.0000
access-list 700 permit 000a.b78b.2d19 0000.0000.0000
access-list 700 permit 000b.5f6e.77c8 0000.0000.0000
access-list 700 deny 0000.0000.0000 ffff.ffff.ffff
access-list 701 deny 000b.5f6e.77c8 0000.0000.0000
access-list 701 permit 0000.0000.0000 ffff.ffff.ffff
no cdp run
snmp-server community GOM_AP1230 RO
snmp-server enable traps tty
radius-server local
group AP1230
user brazil nthash 7 1249523544595F517972017912677A3055325A25770B08770D5C5B4E4478087605 group AP1230
radius-server host 10.1.2.197 auth-port 1812 acct-port 1812 key 7 00233C2B
radius-server retransmit 3
radius-server attribute 32 include-in-access-req format %h
radius-server authorization permit missing Service-Type
radius-server vsa send accounting
bridge 1 route ip
line con 0
line vty 5 15
end
What is wrong?
Thanks very much for your help.

I figured out what was wrong so thank you for stopping by.
I will publish the config for other people to see.
Regards,

Change password on the first use - does not work

Change password on the first use - does not work.
Created a user and specified 'Change password on the first use' - when user logs in - the 'Change password' window does not pop- up.
Please advise.

(APEX 4.0.2) I am running into this same issue - if you don't set the password expiration and locking to 'Yes', the user gets into the app without being asked to change the pw.
When you do set expiration and locking - after the user logs on with their temporary password, it does take them to the change password page (4155:50) but the username is blank. Because the username didn't get to the page the old password will never match and you get the "Invalid password" message.
What am I missing? Anyone successful doing this?
Simple application, default authentication, no javascript, HTTP_SERVER, no ssl.
Thanks,
Steve

I install a "HD VIDEO" program and it was a viru, now safari is not working propely, please help

I install a "HD VIDEO" program and it was a virus, now safari is not working properly, please help

You may have installed one of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

Just installed Office 2011 on my MacBook Pro Retina and now Safari does not work

Just installed Micro Office 2011 on my 13" MacBook Retina and now Safari is not working correctly. Pages load very slowly or not at all.
Any idea of what's wrong?
Thanks

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!

Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
i cant see menu page on display screen

http://support.apple.com/kb/HT1808

IP Address Changed on my AD - Now Authentication is not Working

Similar Messages

Maybe you are looking for