IP address listed as SPAM

Hi,
My current IP address is listed as being used to send SPAM so I am unable to send email through my own domain's email account on my computer.
I'm using the smtp for the account which is mail.domain.com and port 25 with password authentication.
Never had a problem with it before today - would resetting the router to get another IP help?
Thanks,
Dan

Sirideain wrote:
Hi,
My current IP address is listed as being used to send SPAM so I am unable to send email through my own domain's email account on my computer.
I'm using the smtp for the account which is mail.domain.com and port 25 with password authentication.
Never had a problem with it before today - would resetting the router to get another IP help?
Thanks,
Dan
Hi Dan.
May I ask exactly what error message you are receiving ?, and what system is reporting the IP address ?
Pretty much all dynamic IP address space for all ISPs are included in various blocklists, and correctly too as most users should be using the smarthosts (e.g. mail.btinternet.com) to send emails. It helps users of these blocklists to prevent spam reaching them from trojanned/botnet infected machines which typically send emails directly using their own smtp engine.
However this can sometimes interfere with personal domain smtp server - is this your own mail server ? Try altering the port to 587 and try again.
If you've not had a problem until recently, this could be an issue with your domain supplier email server.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Similar Messages

Some Azure IP addresses listed in SORBS

We found some email messages from our Azure-based website (running PHP) were being trapped by spam filters. Upon further investigation, we found that the specific IP address our site was serving from was listed in SORBS:
1 "Hacked" entries [23:14:20 14 Oct 2014 GMT+00].
168.62.20.50 - 1 entries [23:14:20 14 Oct 2014 GMT+00].
2 "Spam" entries [18:04:17 29 Nov 2014 GMT+00].
168.62.20.50 - 2 entries [18:04:17 29 Nov 2014 GMT+00].
(http://dnsbl.sorbs.net/cgi-bin/db)
Given that the website is managed by Azure, we are unable to get the entry removed from SORBS ourselves. What is the process for resolving this issue?

I quote from the link you reference:
... de-listing is relatively easy. You log in to the SORBS Support System and answer the questions truthfully and honestly. If you are within the thresholds and limits you will be presented with a 'Delist Me' button which you may use to "Self-Delist"
the listing.
Note: The self delist button is not available for "Escalated" listings and you have to be logged in
and use the IP address listed to be authorised."
And as I cannot login to the site from the Azure IP address, I am unable to request delisting. Hence, the question in the first place.

Upgrade Default Address Lists from LDAP

Hello,
I migrated from MS Exchange 2003 to 2010 some time back. Currently trying to upgrade the address lists as per the guide here:
http://technet.microsoft.com/en-us/library/dd351283.aspx
When I run
Set-GlobalAddressList "Default Global Address List" -RecipientFilter {(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass -eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass -eq 'publicFolder'))}I get the following error:what should I do? Thanks.

Hi Birenc,
the default Global Address List can be modified during the conversion from Exchange 2003. You won't be able to do it after that hence the error message.
1- Run Get-GlobalAdressList | fl and check the IsDefaultGlobalAddressList value. I believe in your case this would be False.
2- To change this you would need to change the msExchRecipientFilterFlags attribute. you can do this via ADSIEDIT. Open ADSIEDIT connect to the Configuration container. Find the Default Global Address List and change the above attribute value from 3 to
0 and apply the changes. Then change it back to 3 and apply changes.
3- Run GlobalAdressList | fl again and the IsDefaultGlobalAddressList value should now be true.
This should fix your issue.
ecsword

The name cannot be matched to a name in the Address List

Hi,
I checked several posts but no luck.
Problem: We currently have Exchange 2010 and 2003 co-existence, busy migrating to 2010. We have several domains as well. A problem came up in one of our remote access domain where we have Citrix running. After the user has been moved to the new 2010 server
and you re-create their mail profile in Outlook 2010 then it will give the following error:
The name cannot be resolved. The name cannot be matched to a name in the address list.
A popup box appears with the server name exch2010cas.domain.local and the mailbox field =SMTP:[email protected] When you click on Check Name the error keeps popping up. When I change the server to exch2003.domain.local though and click Check Name the
mailbox gets underlined and the servername changes back to exch2010cas.domain.local in the exchange server textbox.
I'm pretty sure it must be an AD or DNS problem somewhere but I'm not sure where? I did add some domain suffixes to the new Exchange server so it can resolve hostnames in the local and remote domain. I also looked at the GAL and the entries for the user
is in there. I'm not sure if it might have something to do with LegacyExchangeDN value either?
I appreciate any help, thanks.

Hi,
I recommend the following troubleshooting:
1.Verify that the Active Directory account that you use either to create the client profile or to log on to the mailbox has been mailbox-enabled.
2.Verify that the user can use the Active Directory account to view sibling objects in the Users container (or in the Active Directory organizational unit that contains the user account).
3.Verify that the user account has been stamped by the Recipient Update Service after you mailbox-enable the user account.
4.Verify that the user can see both the Global Address List objects that are listed in the
showInAddressBook attribute and the members of the Global Address List using Ldp.exe
5.Log on as an administrator, and then verify that there are no duplicates in the
addressBookRoots attribute of the Microsoft Exchange object under <var>Domain</var>,cn=Configuration,cn=Services
For more detail steps, you can refer to the following article:
http://support.microsoft.com/kb/297801/en-us
Thanks,
Angela Shi
TechNet Community Support

I have a new email address and updated it with my apple id/icloud and updated on my iPhone, but i'm getting a pop up to enter my password with my old email address listed for iCloud/Apple id.

I have a new email address and updated my apple id/icloud with the new address. I updated on my iPhone, but i'm keep getting a pop up to enter my password with my old email address listed for iCloud/Apple id. How do I get it to go away?

Did you create a NEW Apple ID or did you change the email address for your OLD Apple ID? This will affect how you update apps in the future.
Anyway, go to Settings/iTunes&App Stores, log out, then log in with the new ID.

New Address List in Exchange 2013, with EMS Multi tenant with emaildomain

HI I want to create a Addresslist in Exchange Online using the filter with specific with each domain by using the email address as
*@xyz.com , since my present scenario is I have two domains and all the recipients are fully populated in the Default GAL.
Br

Hi,
You may implement the address book segregation by the following ways: The method uses the Custom Attribute set for the iusers
1. Create Address List for Organization 1
New-AddressList -name “Organization 1” -RecipientFilter {(CustomAttribute1 -eq “Org 1 Member”)} -DisplayName “Organization 1 List”
2. Create Global Address List for the Organization 1
New-GlobalAddressList -name “GAL_Organization 1” -RecipientFilter {(CustomAttribute1 -eq “Org 1 Member”)}
3. Create corresponding Offline Address List
New-OfflineAddressBook -name “OAB_Organization1” -AddressLists “GAL_Organization1”
4. Create an Address Book Policy for Org 1
New-AddressBookPolicy -name “ABP_Org1” -AddressLists “Organization 1” -OfflineAddressBook “OAB_Organization1” -GlobalAddressList “GAL_Organization 1”
5. Assign the ABP to the Org 1 Users
Get-Mailbox -resultsize unlimited | where {$_.CustomAttribute1 -eq “Org 1 Member”} | Set-Mailbox -AddressBookPolicy “ABP_Org1”
Mailboxes that have 'Org1 Member' as the value of the CustomAttribute1, will only see Other members of their Organization.
Regards from ExchangeOnline.in|Windows Administrator Area | Skype:[email protected]

'Other Address List' not showing in Address Book

I'm trying to create an customized address list that will appear in the address book. I've placed the contacts into a contacts folder, and placed this contacts folder into a .pst file. This way, I can distribute this .pst file for others to use the same
address list.
I'm aware that I have to tick 'Show this folder as an e-mail Address Book', under the properties of the contact folder.
This address book does show up under 'Other Address List' -> name of the address book, when we look at the address book drop down list. This is when I only have 1 email account under the same Outlook profile.
When I have more than 1 email account under the same Outlook profile, this address list shows itself under the 2nd email account, and not 'Other Address List'.
Is this by design or could it be a bug? Is there a way to fix this / any workarounds? Thank you!
FYI I am waiting for verification of my account as I can't post pictures or links. I've already completed verification by clicking the link. Maybe there's a delay somewhere.
Update : images uploaded.

Hi,
I tested this issue and I can reproduce it in my environment. However, as far as I know, this behavior won't affect the usage of the address book.
I searched the internal resource but I cannot find a bug report regarding this issue. If you have any suggestion about this issue, you can submit a feedback via:
http://office.microsoft.com/en-US/suggestions.aspx
Best Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How can I share address lists between two iCloud users

My daughter and I have two different icloud accounts. We are able to share certain calendars, but I would like also to share address lists/groups. Is there a way to do this? I think you could "subscribe" to another Mobile Me user, but how is this done in ICloud?

I do understand that if we have the same Icloud account and Apple ID then they will sync automatically. We don't. I have just separated our accounts (on purpose). Via icloud we can share calendars, but I want to share address lists too. Can address lists be shared (or subscribed to) by two different icloud users with two different Apple IDs?
Anybody know?

Can I share addresses lists between 2 different iCloud users?

Does anyone know if I can share address lists/books between two different iCloud users? I know you can do this with a calendar, but I would like to do it with addresses too.

Yes.
Go to Settings -> Mail, Contacts, Calendars
Add a new account if type iCloud, and username/pasword for the secondary account you want to access their contacts. Turn off all but Contacts, and you wll now be seeing their contacts on your iPhone.
Now in your contacts app, under Groups, there is a new section of contact from the new iCloud account you just setup. If you have the contacts app open (even minimized) you may have to force it closed and re-open to sync in the new contacts.

Is there a way to send email to different people at one time without having to reopen address list each time I pick one

Is there a way to keep email address list open when sending to multiple people. List closes after choosing one person, then have to open to send to next person, etc. etc.

There is a way to create a mailing list.
In the notes app create a list of email addresses separated by commas, i.e. [email protected],[email protected],[email protected]
Copy the address list
Create an entry in contacts for the list
In the email field paste the address list
When you send an email using the email list, you may get a message saying the email address appears to be invalid, select to send anyway.

Is there a way to remove Exchange global address list from phone/Mail app?

I have an iPhone 5 running iOS 7.0.3. Wondering if there is a way I can prevent an Exchange global address list from loading when I compose a message. I am only syncing Mail - not contacts or calendars. Also tried dropping and re-adding account to see if that did anything. This is a personal phone connected to company's Exchange account (legitimately) - I would like to reduce the chance that I incorrectly email a company employee from my personal account when composing a message.

That is what I expected Chris, but to answer your question - yes. I have two accounts setup with the Mail app - Gmail and Exchange. Gmail is the default even. When I am in the Gmail account, compose a new message, just typing "john" for example, brings up most recently used john's first, then all the Johns in my company. I really would prefer not to even have those names populate. Not sure if that can be prevented without dropping the Exchange mail account altogether. That is my question - and thank you for your reply.

Updating Global Address Lists and its corresponding attributes

What do these attributes have to do with the updating of global address lists?
1.msExchAddressBookFlags
2.msExchModerationFlags
3.msExchProvisioningFlags
and what exactly happens with showInAddressBook when hide from address lists are selected or unselected??

Hi,
1. MSExchAddressBookFlags attribute is a flag about the default address list to display for Outlook users address lists. When the value is set to 0, the user would set Contacts as the default address list, when the user opens Address Book, it firstly displays
user’s Contact.
2. MsExchModerationFlags attribute on the Distribution Group indicates if sending the auto approval to senders.
3. About the msExchProvisioningFlags attribute, there is no official article explaining it. Your understanding will be appreciated.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Sort Global Address List by Last Name in Exchange (SBS 2011)

Hello
We Use SBS 2011 and outlook for interoffice mailing.
In our Company People Know each other by their Last Names. But in Outlook in Global Address List names are sorted by First Name alphabetically. I want, for example, when people type “C” in search box of
“Select Names: Global Address List” people who have Last Names beginning with C to be shown.
Thank You for answering

Hi,
Based on your description, please refer to following similar thread and check if can help you.
Exchange
Server 2007 Global Address List, Sort by LastName, FirstName
By the way, in
Select Names: Global Address List, did you click
Advanced Find option and type name in Last name tab in Find panel to search result? Was it will be an acceptable option?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Address list error -- 5.7.1 Relaying not allowed

Hi,
We have setup the Java Messaging Server to send/recieve mails from a gateway. The inbound mail flow works perfectly but, the outbound mail flow has issues.
The outbound mails are not hitting the gateway. When checked the log for outbound mail, it displays the address list error - 5.7.1 Relaying not allowed for any domain i.e gmail.com, etc
version:
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS P1192FLPLN 5.9 Generic_118558-02 sun4u sparc SUNW,Sun-Fire
here is the log for reference...
=========================================================================
root@P1192FLPLN # /opt/SUNWmsgsr/sbin/imsimta test -rewrite -debug -source_channel=tcp_local [email protected] [email protected]
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
17:09:37.43: Debug output enabled, system P1192FLPLN.extmail.xyz.com, process 3fbf.1, message enqueue routines version V6.3 compiled Oct 12 2007 17:15:38
17:09:37.43: mmc_winit('tcp_local','[email protected]','') called.
17:09:37.43: Address reversal invoked on [email protected], force reverse URL 1, capture 1
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.43: Rewrite: "$*", position 0, hash table -
17:09:37.43:   Found: "$A$E$F$U%[email protected]"
17:09:37.43:   Rewrite failed, not forward.
17:09:37.43: Rewrite: "$*", position 1, hash table -
17:09:37.43:   Failed.
17:09:37.43: Rewrite: "$*", position 0, rewrite database -
17:09:37.43:   Failed
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.43: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.43:   Found: "$U%[email protected]"
17:09:37.43:   New mailbox: "abhishek.sen".
17:09:37.43:   New host: "extmail.xyz.com".
17:09:37.43:   New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.43:   New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.43:   - found on channel l
17:09:37.43: Routelocal flag set; scanning for % and !
17:09:37.43:   Checking reverse URL cache for: [email protected]
17:09:37.43:   Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.48:   Resulting URL: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: mmc_open_url called to open ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
17:09:37.49:   URL with quotes stripped: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49:   LDAP URL identified
17:09:37.49: URL context #1 will be used
17:09:37.49:   Performing URL search on: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.53: mmc_read_url result: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53:   URL resolution returned: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: mmc_read_url result: [preferredlanguage] en
17:09:37.53:   URL resolution returned: [preferredlanguage] en
17:09:37.53:       Attribute index: 0
17:09:37.53:       LDAP URL produced preferred language en
17:09:37.53: mmc_read_url result: [mailmsgmaxblocks] 700
17:09:37.53:   URL resolution returned: [mailmsgmaxblocks] 700
17:09:37.53:       Attribute index: 0
17:09:37.53:       LDAP URL produced blocklimit 700
17:09:37.53: mmc_read_url result: [mail] [email protected]
17:09:37.53:   URL resolution returned: [mail] [email protected]
17:09:37.54:       Attribute index: 0
17:09:37.54:       LDAP URL produced address [email protected]
17:09:37.54:   No more results to return
17:09:37.54:     Override postmaster: [email protected]
17:09:37.54:     Preferred language en
17:09:37.54:     Content return block limit now 700
17:09:37.54:   Mapped return address: [email protected]
17:09:37.54:   from_access mapping check: ||MAIL|tcp_local|[email protected]|
17:09:37.54: Queue area size 73232902, temp area size 2067314
17:09:37.54:   18308225 blocks of effective free queue space available; setting disk limit accordingly.
17:09:37.54:   1033657 blocks of free temporary space available; setting disk limit accordingly.
17:09:37.54:       - passed.
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.54: Rewrite: "$*", position 0, hash table -
17:09:37.54:   Found: "$A$E$F$U%[email protected]"
17:09:37.54:   Rewrite failed, not forward.
17:09:37.54: Rewrite: "$*", position 1, hash table -
17:09:37.54:   Failed.
17:09:37.54: Rewrite: "$*", position 0, rewrite database -
17:09:37.54:   Failed
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.54: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.54:   Found: "$U%[email protected]"
17:09:37.54:   New mailbox: "abhishek.sen".
17:09:37.54:   New host: "extmail.xyz.com".
17:09:37.54:   New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.56:   New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.56:   - found on channel l
17:09:37.56: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
17:09:37.56: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.56: Rewrite: "$*", position 0, hash table -
17:09:37.56:   Found: "$A$E$F$U%[email protected]"
17:09:37.57:   Rewrite failed, not envelope.
17:09:37.57: Rewrite: "$*", position 1, hash table -
17:09:37.57:   Failed.
17:09:37.57: Rewrite: "$*", position 0, rewrite database -
17:09:37.57:   Failed
17:09:37.57: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.57: Rewrite: "xyz.com", position 0, hash table -
17:09:37.57:   Failed.
17:09:37.57: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.59:   Failed
17:09:37.59: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.59: Rewrite: "*.com", position 0, hash table -
17:09:37.59:   Failed
17:09:37.59: Rewrite: ".com", position 0, hash table -
17:09:37.59:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.59:   New mailbox: "bhanu.prasad".
17:09:37.59:   New host: "xyz.com".
17:09:37.59:   New route: "TCP-DAEMON".
17:09:37.59:   New channel system: "TCP-DAEMON".
17:09:37.59: Looking up host "TCP-DAEMON".
17:09:37.60:   - found on channel tcp_local
17:09:37.60: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.60: Rewrite: "$*", position 0, hash table -
17:09:37.60:   Found: "$A$E$F$U%[email protected]"
17:09:37.60:   Rewrite failed, not envelope.
17:09:37.60: Rewrite: "$*", position 1, hash table -
17:09:37.60:   Failed.
17:09:37.60: Rewrite: "$*", position 0, rewrite database -
17:09:37.60:   Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.61: Rewrite: "xyz.com", position 0, hash table -
17:09:37.61:   Failed.
17:09:37.61: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.61:   Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.61: Rewrite: "*.com", position 0, hash table -
17:09:37.61:   Failed
17:09:37.61: Rewrite: ".com", position 0, hash table -
17:09:37.63:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.63:   New mailbox: "bhanu.prasad".
17:09:37.63:   New host: "xyz.com".
17:09:37.63:   New route: "TCP-DAEMON".
17:09:37.63:   New channel system: "TCP-DAEMON".
17:09:37.63: Looking up host "TCP-DAEMON".
17:09:37.63:   - found on channel tcp_local
17:09:37.63:   Rewrite rules result: [email protected]
17:09:37.63:   Checking reverse URL cache for: [email protected]
17:09:37.63:   Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.65:   URL generation failed, status = 0
*** Debug output from rewriting a forward envelope address:
17:09:37.65: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.65: Rewrite: "$*", position 0, hash table -
17:09:37.65:   Found: "$A$E$F$U%[email protected]"
17:09:37.65:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.65:     old state = not checked.
17:09:37.65:     Domain check on xyz.com.
17:09:37.66:     Could not add domain result 0 to cache for xyz.com.
17:09:37.66:     new state = fail pending.
17:09:37.66:   Rewrite failed due to prechannel mismatch.
17:09:37.66: Rewrite: "$*", position 1, hash table -
17:09:37.66:   Failed.
17:09:37.66: Rewrite: "$*", position 0, rewrite database -
17:09:37.66:   Failed
17:09:37.66: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.66: Rewrite: "xyz.com", position 0, hash table -
17:09:37.66:   Failed.
17:09:37.67: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.67:   Failed
17:09:37.67: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.67: Rewrite: "*.com", position 0, hash table -
17:09:37.67:   Failed
17:09:37.67: Rewrite: ".com", position 0, hash table -
17:09:37.67:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.67:   New mailbox: "bhanu.prasad".
17:09:37.67:   New host: "xyz.com".
17:09:37.67:   New route: "TCP-DAEMON".
17:09:37.69:   New channel system: "TCP-DAEMON".
17:09:37.69: Looking up host "TCP-DAEMON".
17:09:37.69:   - found on channel tcp_local
address channel        = tcp_local
forward channel        = tcp_local
channel description    =
channel caption        =
channel user filter    =
dest channel filter    =
source channel filter =
channel flags #0       = BIDIRECTIONAL SINGLE_SYSTEM IMMNONURGENT NOSERVICEALL channel flags #1       = SMTP_CRLF MX IDENTNONENUMERIC DEFAULT
channel flags #2       = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3       = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4       = EIGHTNEGOTIATE HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5       = TRUNCATESMTPLONGLINES
channel flags #6       = LOCALUSER REPORTNOTARY
channel flags #7       = SWITCHCHANNEL REMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8       = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9       = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALNONE NOTURN
defaulthost            = extmail.xyz.com extmail.xyz.com
linelength             = 998
addrsperfile           = 99
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = tcp-daemon
channel queue 0 name   = SMTP_POOL
channel queue 1 name   = SMTP_POOL
channel queue 2 name   = SMTP_POOL
channel queue 3 name   = SMTP_POOL
channel after params    =
channel daemon name    = 10.8.51.126
channel user name      =
urgentnotices          = 1 2 4 7
normalnotices          = 1 2 4 7
nonurgentnotices       = 1 2 4 7
channel rightslist ids =
local behavior flags   = %x0
expandchannel          =
notificationchannel    =
dispositionchannel     =
tlsswitchchannel       =
backward channel       = tcp_local
unique identifier      = [email protected]
header forward address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
envelope rev address   = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
name                   =
mbox                   = bhanu.prasad
Extracted address action list:
    [email protected]
Extracted 733 address action list:
    [email protected]
Address list expansion:
*** Debug output from alias expansion:
17:09:37.76: Inner expand, level = 0, mailbox = [email protected]
17:09:37.76: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.76: Rewrite: "$*", position 0, hash table -
17:09:37.76:   Found: "$A$E$F$U%[email protected]"
17:09:37.76:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.76:     old state = not checked.
17:09:37.76:     Domain check on xyz.com.
17:09:37.77:     Could not add domain result 0 to cache for xyz.com.
17:09:37.77:     new state = fail pending.
17:09:37.77:   Rewrite failed due to prechannel mismatch.
17:09:37.77: Rewrite: "$*", position 1, hash table -
17:09:37.77:   Failed.
17:09:37.77: Rewrite: "$*", position 0, rewrite database -
17:09:37.77:   Failed
17:09:37.77: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.77: Rewrite: "xyz.com", position 0, hash table -
17:09:37.77:   Failed.
17:09:37.79: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.79:   Failed
17:09:37.79: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.79: Rewrite: "*.com", position 0, hash table -
17:09:37.79:   Failed
17:09:37.79: Rewrite: ".com", position 0, hash table -
17:09:37.79:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.79:   New mailbox: "bhanu.prasad".
17:09:37.79:   New host: "xyz.com".
17:09:37.79:   New route: "TCP-DAEMON".
17:09:37.80:   New channel system: "TCP-DAEMON".
17:09:37.80: Looking up host "TCP-DAEMON".
17:09:37.80:   - found on channel tcp_local
-13 expansion total.
*** Debug output from submitting an envelope address:
17:09:37.80: mmc_wadr(0x0017ae68,'[email protected]','[email protected]') called.
17:09:37.80: Copy estimate before address addition is 1
17:09:37.80:     Parsing address [email protected]
17:09:37.80: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.80: Rewrite: "$*", position 0, hash table -
17:09:37.81:   Found: "$A$E$F$U%[email protected]"
17:09:37.81:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.81:     old state = not checked.
17:09:37.81:     Domain check on xyz.com.
17:09:37.81:     Could not add domain result 0 to cache for xyz.com.
17:09:37.81:     new state = fail pending.
17:09:37.81:   Rewrite failed due to prechannel mismatch.
17:09:37.81: Rewrite: "$*", position 1, hash table -
17:09:37.83:   Failed.
17:09:37.83: Rewrite: "$*", position 0, rewrite database -
17:09:37.83:   Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
xyz.com", literal = "", tag = ""
17:09:37.83: Rewrite: "xyz.com", position 0, hash table -
17:09:37.83:   Failed.
17:09:37.83: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.83:   Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
.com", literal = "", tag = ""
17:09:37.83: Rewrite: "*.com", position 0, hash table -
17:09:37.84:   Failed
17:09:37.84: Rewrite: ".com", position 0, hash table -
17:09:37.84:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.84:   New mailbox: "bhanu.prasad".
17:09:37.84:   New host: "xyz.com".
17:09:37.84:   New route: "TCP-DAEMON".
17:09:37.84:   New channel system: "TCP-DAEMON".
17:09:37.84: Looking up host "TCP-DAEMON".
17:09:37.84:   - found on channel tcp_local
17:09:37.84:       - adding address [email protected] to headers.
17:09:37.86:       - orig_send_access mapping check: tcp_local|abhishek.sen@extm
ail.xyz.com|tcp_local|[email protected]
17:09:38.16:         - failed.
17:09:38.16: Good address count 0 defer count 0
17:09:38.16: Copy estimate after address addition is 1
17:09:38.16: mmc_waend(0x0017ae68) called.
17:09:38.16:   Copy estimate is 1
17:09:38.16:   Queue area size 73232902, temp area size 2067288
17:09:38.16:   36616451 blocks of effective free queue space available; setting
disk limit accordingly.
17:09:38.16:   1033644 blocks of free temporary space available; setting disk li
mit accordingly.
Expanded address:
[email protected]
Submitted address list:
Address list error -- 5.7.1 Relaying not allowed: [email protected]
Submitted notifications list:
=========================================================================Do we have to make any changes on other config files except the imta.cnf and mappings file for inbound and outbound..
thanks for any help
Edited by: prasad0_0 on Jul 8, 2008 4:58 AM

i have already setup the messaging server 6 months back.. followed the same procedure to route mails to a gateway..
made changes to the imta.cnf for outbound mail flow to the tcp_local and mappings file to accept inbound mail flow from the gateway. Its working perfectly on the older setup, but this now, have issues with new setup.
here is the imta.cnf file..
! IMTA configuration file
! part I : rewrite rules
! Domain Rewrite Rules.
! Uncomment this line to use domain rewrite rules
! from the configuration file instead of the domain database.
! Please refer to the iMS documentation for details.
!<IMTA_TABLE:domains.rules
! Rules to select local users
$* $A$E$F$U%[email protected]
P1192FLPLN.extmail.xyz.com $U%[email protected]
extmail.xyz.com $U%[email protected]
! ims-ms
.ims-ms-daemon $U%$H.ims-ms-daemon@ims-ms-daemon
! lmtp
!.lmtp $U%$H@lmtpcs-daemon
! lmtpn
!.lmtpn $U%$H@lmtpcn-daemon
! native
.native-daemon $U%$H.native-daemon@native-daemon
! pipe
.pipe-daemon $U%$H.pipe-daemon@pipe-daemon
! tcp_local
! Rules for top level internet domains
<IMTA_TABLE:internet.rules
! tcp_intranet
! Do mapping lookup for internal IP addresses
[] $E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon
.extmail.xyz.com $U%$H.extmail.xyz.com@tcp_intranet-daemon
* $U%$&0.extmail.xyz.com
! reprocess
reprocess $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
reprocess.P1192FLPLN.extmail.xyz.com $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
! process
process $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
process.P1192FLPLN.extmail.xyz.com $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
! defragment
defragment $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
defragment.P1192FLPLN.extmail.xyz.com $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
! conversion
conversion $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
conversion.P1192FLPLN.extmail.xyz.com $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
! bitbucket
bitbucket $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
bitbucket.P1192FLPLN.extmail.xyz.com $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
! deleted
deleted-daemon $U%$H@deleted-daemon
.deleted-daemon $U%$H@deleted-daemon
! inactive
inactive-daemon $U%$H@inactive-daemon
.inactive-daemon $U%$H@inactive-daemon
! hold
hold-daemon $U%$H@hold-daemon
.hold-daemon $U%$H@hold-daemon
! part II : channel blocks
defaults notices 1 2 4 7 copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 logging defaulthost extmail.xyz.com extmail.xyz.com
! delivery channel to local /var/mail store
l subdirs 20 viaaliasrequired maxjobs 7
P1192FLPLN.extmail.xyz.com
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D
ims-ms-daemon
! native
native defragment subdirs 20 maxjobs 1
native-daemon
! pipe
pipe single defragment subdirs 20
pipe-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 loopcheck daemon 10.8.51.126
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4
tcp_intranet-daemon
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4
tcp_submit-daemon
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4
tcp_auth-daemon
! tcp_tas
tcp_tas smtp mx single_sys allowswitchchannel mustsaslserver maytlsserver deliveryflags 2
tcp_tas-daemon
! tcp_lmtpss (LMTP server - store)
!tcp_lmtpss lmtp flagtransfer
!tcp_lmtpss-daemon
! tcp_lmtpcs (LMTP client - store)
!tcp_lmtpcs defragment lmtp port 225 nomx single_sys subdirs 20 maxjobs 7 pool SMTP_POOL dequeue_removeroute
!lmtpcs-daemon
! reprocess
reprocess
reprocess-daemon
! process
process
process-daemon
! defragment
defragment
defragment-daemon
! conversion
conversion
conversion-daemon
! bitbucket
bitbucket
bitbucket-daemon
! deleted
deleted
deleted-daemon
! inactive
inactive
inactive-daemon
! hold
hold
hold-daemonand mappings file..
! MTA mappings file
! for access control and other table lookups
FROM_ACCESS
! Entries to block certain submissions normally would be inserted here,
! above the ntended-to-be-final entries that while permitting submission,
! merely disable any potential "vacation" effect.
! The following entries disable Sieve "vacation" action on lists sorts
! of addresses, as recommended by the Sieve "vacation" extension draft.
   *|SMTP*|*|*|MAILER-DAEMON@*|*    $!$Y
   *|SMTP*|*|*|LISTSERVE*@|*        $!$Y
   *|SMTP*|*|*|majordomo@*|*        $!$Y
   *|SMTP*|*|*|*-request@*|*        $!$Y
   *|SMTP*|*|*|*-owner@*|*          $!$Y
   *|SMTP*|*|*|owner-*@*|*          $!$Y
PORT_ACCESS
*|*|*|*|* $C$|INTERNAL_IP;$3|$Y$E
* $YEXTERNAL
INTERNAL_IP
$(10.8.55.49/24) $Y
$(10.8.51.125) $Y
$(10.8.51.126) $Y
127.0.0.1 $Y
* $N
ORIG_SEND_ACCESS
tcp_local|*|tcp_local|* $N$D30|Relaying$ not$ allowed
tcp_*|*|native|* $N
tcp_*|*|hold|* $N
tcp_*|*|pipe|* $N
tcp_*|*|ims-ms|* $N
! Block "external" submissions of explicitly source-routed "internal" addresses
tcp_local|*|tcp_intranet|@*:*.*   $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*$%*@*   $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*.*!*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|"*@*"@* $N$D30|Explicit$ routing$ not$ allowed
SEND_ACCESS
tcp_*|*|*|*@[127.*] $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@localhost.* $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.com $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.net $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.org $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.test $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.example $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.invalid $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.localhost $X5.1.2|$NBad$ destination$ system
<IMTA_TABLE:mappings.localewe are able to receive mails from the gateway, but when using uwc to send the mail, the mail doesnt hit the gateway. trying a telnet from the messaging server to the gateway, works perfectly.
thanks in advance.

Disable Global address list suggestions when composing e mail

I got a question of one of my users a few days ago pointing out that when using an Iphone with Active Sync / Exchange synchronisation he is not able to disable e mail address suggestions he gets when typing the e mail address in the TO field comming from the Global Address list.
My user wants to use his personal contacts he uses in Outlook, but does not want to use the Global Address list from exchange. (at least not the automatic suggestions which pop up during typing an e mail in the TO / CC fields when composing an E mail.
I am able to disable this in the Contract app, but not in the E mail app in IOS.
It seems that when I enable to sync the contacts I get both the Personall contacts plus the Global Address list, there is no way to set any setting in regard to the contacts here.
I cannot find any setting which disables the phone of looking up the address I am typing in the Global Address list, having a verry big corporate global address list (we use this in our desktop / outlook environment) this can be verry annoying.
Anyone who can tell me if I can disable this (or not) and if so point me in the right direction ?
Thank you

What device do you have? And what is missing? You Compose a message, choose a name, then they have email addresses missing? or the contact is missing?
BlackBerry Help
www.blackberryboards.com

IP address listed as SPAM

Similar Messages

Maybe you are looking for