IP address not showing when creating Network Session

Hi,
Odd one here. I have been having issues with CoreMIDI lately. To try to rectify I deleted my existing Network Session 1 from the Network applet in the Audio MIDI app. This has been working fine with lots of iPad based synths except for one app (V-Control Pro) but having tried all other avenues to fix my problems I deleted the session.
I created a new session and enabled it but where it used to show the IP address of my Mac Pro i.e.
192.168.254.4:5004
The iPad used to show up automatically in that window and I could select it and click connect and all would be fine.
Now it only shows the bonjour/AD name of my Mac i.e.
crapple:5004
and the iPad no longer shows up until I either open a CoreMIDI app on the pad or I open MIDIBridge on the pad
question 1: Why does my IP address no longer show up?
question 2: Has MIDIbridge "hijacked" CoreMIDI on the pad so that it will only appear on my Mac Pro when it is open?
Thanks
jake

Hi Jason,
Possible answer to Q1: I don't think Audio/MIDI setup ever shows a raw IP address unless you keyed it in yoursel once upon a time. Given the IP address range you quote is dynamic, the iPad's IP address could change over time, I'd suggest you are safest using the bonjour name of the iPad to connect from the Mac (when it is visible - see below).
Answer to Q2: No, MidiBridge hasn't hijacked CoreMIDI, but you need at least one CoreMIDI network aware app running in order for the network session to be activated on the iPad. MidiBridge is one such app and since you generally would start it and leave it running in the background will keep the session active for you.

Similar Messages

Excise and ***. Valsue doen not show when Creating a Sales Order

Hi SAP Gurus,
I am creating a Return Sales order through VA01 with reference of Billing Document which was earlier giving error of 'Copying from sales document type ZSFG to ZREV is not supported' that was resolved by going through the available threads support. I have done it through VTAF.
Now system copying the records and showing the material and qty but when we doube click an item and then go in Condition tab it is not showing Assesable Value, Excise amount and CST where as it was showing Freight Amount.
Please advise what wrong we are doing.
Rajesh Gupta

Check the pricing analysis in condtions tab what it says ?
If only taxes are not copied then check the UTXJ Condition records , if it exits then go to VK12 check the validity periods of the same.
Hope it helps u
Regards,
Ramesh

Properties panel (for Content Types) not showing when creating sharepoint based document

Hello,
I've created three Content Types to populate when creating a new Budget document. The problem I'm seeing is that my pc always opens the Budget doc in Word Online and the properties box does not show. When I create a new Budget doc with my test pc, where
it always opens in Word, the properties box does show the three Content Types.
Is the idea of Content Type and the properties window supposed to work in Word Online?
My pc is Win 7, Office 2010 and IE 11
My test pc is Win 8, Office 2013 and IE 10
Thanks

Hi Jimbo, they don't work online. You should change your library settings to open documents in client program.
cameron rautmann

I get the msg "email address not verified" when I sign into iTunes account, however it shows my account as already verified

I get the msg "email address not verified" when I sign into iTunes account, however it shows my account as already verified, sends me back to sign in again & then gives me the same msg all over again. How do I fix this and access my iTunes account from my iPod Touch?

I'm having the same problem. Did you ever find out how to fix it?

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand. I also cannot attach any of these pics into an e-mail or into any other file. I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild. Any Help?! Any Suggestions on how to fix this?! I have spent almost 2 days now going through all of the published help.
I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database -- if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
LN

Date not showed when report is viewed in PDF .

Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.

I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now.

PSE 8 some photos will not autoimport when creating an photobook and block the whole sequence. Are there knows reasons why individual photos can hang the import? Thanks Michael

When creating photobooks with PSE 8 I find occasionally that certain photos block the autoimport function and none of the sequence are loaded into the new photobook. Using the identical setting to create a photobook other sequences of photos work perfectly. The photos have been checked and found and all are connected and recognised. Are there knows issues with some photo formats which will not autoimport when creating a photobook?
Thanks for the help.
Michael

Sometimes LR can be "nudged" into showing folder relationships which better match the file system, by using the "show parent folder" command. When existing folders appear as if they were "top level" in the drive, we can see a more or less virtual picture of the situation, rather than anything real. So newly added folders can sometimes present themselves as if independent of what is already there.
By forcing LR to show a fuller hierarchy of folders, more attention gets paid to the actual arrangement - so new and existing folders should "wake up" and thereafter appear more reliably in the right relationships.

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

HT1549 Shared files do not show up on network

Macmini running on OS X 10.6.8 on a trendnet router connected to windows 7 pc. Mac will not show up on network after going over the steps to set up file shareing.

Hello Jfrosa,
Thank you for the details of the issue you are experiencing with File Sharing. I found an article that should help with troubleshooting this:
OS X: How to connect to Windows File Sharing (SMB) using Snow Leopard or earlier
http://support.apple.com/kb/ht1568
Thank you for using Apple Support Communities.
Best,
Sheila M.

My external hard drive does not show when I am trying to open a document in Office Org??

My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

Does the drive show up under 'Devices' in Finder?

Wireless network connection not showing up in network connections

Hi, Experts,
I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet.
How to set up the wireless network connection that it will show up in network connections? Thank you very much for your help.

Issue Resolved. I did not turn on the wireless switch.

Preview icon not showing when in thumbnail. (Sketchu

Hello,
I recently updated my MBP to Yosemite and installed sketchup on it.
The preview icon of my sketchup files are not showing when in thumbnail. But as i increase the size of the icon from thumbnail in viewoption i.e from 64px x 64px to 124px x 124px it shows. So my icon is shown as blank without any app logo. Also when i change my view from thumbnail to coverflow or something it shows. Otherthan thumbnail everything works.
So where is the error in it?
Please help...
Thanks
Amar

Try the standard fixes:
- Rest. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. - Restore from backup
- Restore to factory defaults/new iPod.

Battery icon dose not showing when i plug in to usb or power

battery icon dose not showing when i plug in to usb or power? and not charging when phone is on

I would try another cable or try the cable in another ios device
to verify if the cable was broken or your iphones connector is

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97456)

My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

Thank you for the sugestion, but it was working fine both on the lock screen and on my home screen. I check all my settings and it is how it was from Friday, when I got the iPhone 5s. It just stop working. The only way I can fix it is by shutting down the phone. It will work for a while, then it won't.

IP address not showing when creating Network Session

Similar Messages

Maybe you are looking for