IP address not UK registered

Hi. I am trying to connect a vodafone sure-signal device and it will not connect. They say it is because my IP address 192.168.0.1 is not UK registered and to contact my ISP (BT) to add it to the "ripe list".. Is this something you can help with please..?
Thanks,
Jon.

jonster1962 wrote:
Many thanks Keith, looks like Vodafone are spinning me a yarn then... I will go back to them for clarification.
thanks,
Jon.
Before going back to vodafone it may be useful to check out the Vodafone Sure Signal forum
http://forum.vodafone.co.uk/t5/Vodafone-Sure-Signal/bd-p/70
You do not explain how they thought your IP address was 192.168.0.1
If you are on FTTC and have your router attached to an Open Reach modem then this may be the root cause of your problem.
It looks as if Vodafone tech support is of the same calibre as BT India.

Similar Messages

Hi there I lost my password for my original iTunes account I can't recover it because the email address it is registered under is not longer valid How can I access my old account?

Hi there.
I did a factory restore and then restored it with iCloud back-up. I have been using lots of Apple products and i have used three different email adresses. Almost all apps restored perfectly but everytime i try to play a song in the Music app, i asks me for a Apple-ID i had no idea i have used.
Hence:
I lost my password for my original iTunes account
I can't recover it because the email address it is registered under is not longer valid
How can I access my old account?
Can't find a place to change the email address to my new one without the password which I no longer remember.
There is no way to just erase Apple-ID's on my device either.
What to do? Should i ju give up and start from scratch and delete 2 years of stuf?
Cheers!

If you can remember the answers to the security questions when you set up that account - I think that you can reset the password without needing email authentication. You can try it here. Read it and see if it's possible. But if you can't remember the answers to the questions it will not work.
http://support.apple.com/kb/ht1911

ISE 1.2 Guest Portal - This device has not been registered.

I have setup and SSID on my WLC. I got the redirecting to my ISE guestportal working.
However when I sign in I get a Device regitration Page
"This device has not been registered"
Unable to obtain the user information needed for network access.
The device ID is grayed out and blank.
Any assistance in this matter would be greatly appreciated

Thanks Johnston,
P.S for those who needs the path ISE 1.2 Administration -> Web Portal Management -> Settings -> Multi-Portal Configurations -> DefaultGuestPortal -> Operations.
On another note
When I login - I get my acceptable usage policy.
Accept
Then get a Device registration Portal where I can add the MAC address.
Now I have two quistions.
When I add my test mac address the url redirects to myservername:8443/guestportal/AfterDevReg.action - unable to connect <- that's the one issue.
The other is - Can't I by pass the MAC? ie once the user is signed on to get access.
Curretly I have the following settings enabled.
Enable Mobile Portal
Allow guest users to change password
Guest users should be allowed to do device registration <- if I disable that after signon the page just flash back to the guest portal.

Where we maintain the CST & VAT numbers for a plant which is not a register

Hi All,
Where we maintain the CST & VAT numbers for a plant which is not a registered for Excise?
we are printing it on the invoice output. on debugging it is known that it comes from the table AUSP, after checking the table CABN.
Any body knows about these two tables? let me know the purpose of these tables
thanks in advance,
Venkat

Mr Big Screams.....
I hope you have neigther read my reply completely nor understood correctly.
Let me tell you, maintaining record in J1ID in Plant address details doesnt declared that plant is registered under Excise act until unless you maintain ECC details. ( ECC -Excise Control Code number which will be alloted by the Central Excise dept).
You will find CST / VAT fields in J1ID which is actually given to maintain Plant address details for INDIA localization.
Hope its clear.
Regards,
Reazuddin MD

New Build Address not recognised

I am trying to transfer my bt phobe line to my new address, it is registered with royal mail, but when I ring customer services they say that the address is not showing up on the system,
How do I add my address to the BT/Openreach database?

Hi Ahmeddeshmukh,
Welcome to the forum and thanks for posting. I've got your email and I'll get back to you this evening.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Central Web Authentication Fail - This device has not been registered.

Dear All,
I have problem when apply the cwa. i have wlc and ise,
I want all user (all type device) that want access to my network by Wifi, will authenticated by AD.
but user cant connect to network evenly only authenticate.
My ISE Authorization rule:
if
(Wireless_MAB AND AD1:ExternalGroups EQUALS example.com/Users/Domain Users)
Anyone, have experience like this before, please share..
nb : my ise licese is Base Package
Thanks!!

I had follow the configuration guide from here:
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml
but, my authentication always fail with redirect to device registration,
when user connect the ssid and input the username and password based on active directory,
then browser will show up like this :
1. Access with Windows :
Device Registration
This device has not been registered.
You need to manually configure your device. Contact your system administrator for assistance.
Your device configuration is not supported by the setup wizard.
Device ID        : my-workstation-mac-address-
Description     :
2. Access with Android
Device Registration
This device has not been registered.
You need to manually configure your device. Contact your system administrator for assistance.
Unsopported operating system type encountered.
Device ID        : my-android-mac-address-
Description     :
Thanks,

I had an issue when trying to register with the forums, but I am having problems speaking someone because I am not a "registered" member?

Dear forum member(s), I was excited at the possibilities that Firefox offered. I have been looking forward to researching on the forums, but I made a blunder when registering.
I changed my email password some time ago and forgot that I had done so. I also have a second email which is similar to my address I was registering and I think I was actually using my the second email information until I caught the mistake.
Shortly thereafter I received an email with my user ID but no password. I had been assuming that I would receive a onetime computer generated password, but I wasn’t sure how things were supposed to go. After closely studying the language of the email, I was led to the conclusion that I would login with my original information I had provided.
My final attempt to register failed and I can’t explain why. I am positive that I had the right user id and password and now I am in limbo. I registered with the "Add-ons" section in 15 minutes. I was never told I was banned, but I was never told I am now a member. Thanks for reading.
Sincerely,
reel4

Not at all. I have never posted to the forums. The only thing I have written is what you see in this thread. I registered at add-ons section and things were fine. I wanted to use the forums, because I like to learn what I can. The problems began when I tried to register at the forms. At first, I thought my login from add-ons would work at the forums. It didn't. I honestly don't know if there is separate login and validation for each firefox/mozilla section.
When I attempted to register with the forums, I messed up when trying to login because I made too many attempts. I was either using another password from a second email or I misread those weird words they use to make sure you are not a bot.
I don't know what exactly was written but they basically wanted to take a look at things. I felt that was reasonable. After all - I felt like a moron for not being able to read those contorted word tests.
Then they sent me my user id but with no new password so I assumed my current password was the same as the one I originally gave. Long story short, I tried to login again- all three times I failed. They never banned me or told me anything. I have not heard from anyone or thing. To It's like they have just walked away. I just don't understand what has happened and why no one will tell me anything. So... no - I am not banned. When I do bet blocked after I logoff, it has the same effect as a ban. I guess I have been ousted. I just wish this I could get this matter resolved. I changed my password and email so maybe that will keep around.
It's a strange situation and I am at loss for words. I even wrote the forum people an apology letter describing the facts above in details and apologizing for the inconvenience. I actually apologized for being an idiot.
One last thing - at the outset of the post - I told you they gave me one last opportunity to login and it failed. I know for a fact I had the information correct. I had even written my password somewhere else on the screen to where I could see each character to verify the pass word was correct and then cut and paste.
James - who knows what the future holds but I must thank you my friend. At the very least, I could tell my story. It is all so strange.

HT1918 My Apple ID (email address) is somehow registered to the US store even though I live in the UK. Can I close the US account and open a UK one with the same ID/email?

My Apple ID (email address) is somehow registered to the US store even though I live in the UK. Is there any way I can close the US account and open a UK one with the same ID/email?

No, but you can change the country of your iTunes Store account. Sign into your iTunes Store account and click the "change country" link. You'll need a valid UK credit card to complete the change. If you have any credit balance remaining, you'll need to contact the iTunes Store to clear that for you before you'll be able to change the country.
Note that if you purchased anything from the US iTunes Store, you probably will not be able to re-download it nor update apps once you change the country. So you may prefer to set up a new email address so you can create a new account in the UK iTunes Store. You can change the email address to which receipts and other notices are sent to your actual email address, if you prefer.
Regards.

[PI 7.11 SP3] PI components not correctly registering themselves after AS restart

Hi Experts,
We have planned a system backup shutdown and restart every night for our PI environment.
In a random manner, some PI components as XI AF or Integration Directory are not correctly registered to SLD after that restart : for example, Integration Directory registers but it is not assigned to a PI domain.
It is good to mention that PI instance is actually using its own SLD (local SLD) for registration.
When the problem occurs, I follow sap note 1117249 to manually register PI components within SLD and this solves the issue.
But the definitive solution will be to avoid incomplete SLD registration at restart … But I have not yet found any sap note for that kind of solution.
Il someone can help J
Thanks a lot
Nadir

Hey Caio,
Thanks for the response but it doesn't actually answer my question. But to that point, for a "basic" PI post install, which of the NWA config tasks would you run other than the "initial config" ? And would you run them BEFORE you updated the SLD content (cimsap/CRDelta) ?
NW: PI - AS ABAP (Basic Configuration for Idoc, Proxy): Maintain
PI Adapter Engine in JPR Mode
PI Demo Client
PI Full Qualified Host Name
PI Self Test for NetWeaver
PI SLD Self Registration
Specifically, I did the SAPINST - ABAP/JAVA patches - Client copy - and THEN the initial config wizard (Setup a new local SLD, ). Also, during the initial config, I clicked the box marked "This SLD will be used as a name server for development" and my PI server hostname was already in the box marked "object server name". This config took about 30 minutes. I didn't see any errors or warnings. although I didn't view the log. I did go into Java JEE services and Filter for Services with name "XPI". All were green.
THEN I tried to update the SLD content.
any thoughts appreciated.
NICK

ERROR : SSO Partner application could not be registered successfully

Hi,
when i run txkrun.pl to register sso my regisitration fails
perl txkrun.pl -script=SetSSOReg
You are registering ORACLE HOME, Instance with SSO and OID Servers.
Enter the host name where Oracle iAS Infrastructure database is installed ? hschbscgn20104.hclt.corp.hcl.in
Enter the LDAP Port on Oracle Internet Directory server ? 389
Enter SSL LDAP Port on Oracle Internet Directory server ? 636
Enter the Oracle Internet Directory Administrator (orcladmin) Bind password ?
Enter the instance password that you would like to register this application instance with ?
Enter Oracle E-Business apps database user password ?
*** Log File = /data/vis/inst/apps/VIS_hschbscgn20118/logs/appl/rgf/TXK/txkSetSSOReg_Fri_Nov_19_10_05_55_2010.xml
Beginning input parameter validation for Oracle Home Instance registration.
*** ALERT: This Oracle Home Instance is already registered. Oracle Home Instance Registration will be skipped.
Input parameter validation for Oracle Home Instance registration completed.
Beginning input parameter validation for SSO registration.
Input parameter validation for SSO registration completed.
Beginning input parameter validation for OID registration.
Input parameters validation for OID registration completed.
BEGIN SSO REGISTRATION:
Beginning to register partner application.
*** ERROR : SSO Partner application could not be registered successfully.
End of /data/vis/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkSetSSOReg.pl : No Errors encountered
Below is my Log file:
BEGIN SSO REGISTRATION:</message>
</record>
<record>
<date>2010-11-18T23:31:11</date>
<millis>1290103271727</millis>
<sequence>79</sequence>
<logger>txkSetSSOReg</logger>
<level>INFO</level>
<class>oracle.apps.fnd.txk.ias.TXKSTDIO</class>
<method>info</method>
<thread>10</thread>
<message>Beginning to register partner application.</message>
</record>
<record>
<date>2010-11-18T23:31:11</date>
<millis>1290103271728</millis>
<sequence>80</sequence>
<logger>txkSetSSOReg</logger>
<level>INFO</level>
<class>oracle.apps.fnd.txk.ias.config.Instance</class>
<method>updateIasProperties</method>
<thread>10</thread>
<message>updating ias.properties file by retrieving data from DB</message>
</record>
<record>
<date>2010-11-18T23:31:12</date>
<millis>1290103272017</millis>
<sequence>81</sequence>
<logger>txkSetSSOReg</logger>
<level>INFO</level>
<class>oracle.apps.fnd.txk.ias.config.Instance</class>
<method>updateIasProperties</method>
<thread>10</thread>
<message>Retrieved Preferences: {IASname=VIS.hclt.corp.hcl.in, InfrastructureDBCommonName=ORAAS.HCLT.CORP.HCL.IN, InfrastructureUse=true, OIDhost=hschbscgn20104.hclt.corp.hcl.in, SSLOnly=false, OIDsslport=636, IASpassword=05a78096c85355eed5aa08f04546377eb5e16520f2237467b7, OIDport=389}</message>
</record>
<record>
<date>2010-11-18T23:31:12</date>
<millis>1290103272018</millis>
<sequence>82</sequence>
<logger>txkSetSSOReg</logger>
<level>INFO</level>
<class>oracle.apps.fnd.txk.ias.config.Instance</class>
<method>updateIasProperties</method>
<thread>10</thread>
<message>ias.properties is latest. No need to update.</message>
</record>
<record>
<date>2010-11-18T23:31:12</date>
<millis>1290103272019</millis>
<sequence>83</sequence>
<logger>txkSetSSOReg</logger>
<level>INFO</level>
<class>oracle.apps.fnd.txk.ias.sso.Instance</class>
<method>ssoReg</method>
<thread>10</thread>
<message>Processing APPS_FRAMEWORK_AGENT: https://hschbscgn20118.hclt.corp.hcl.in:443</message>
</record>
<record>
<date>2010-11-18T23:31:12</date>
<millis>1290103272019</millis>
<sequence>84</sequence>
<logger>txkSetSSOReg</logger>
<level>INFO</level>
<class>oracle.apps.fnd.txk.ias.sso.Instance</class>
<method>removePortsFromAgent</method>
<thread>10</thread>
<message>Agent:https://hschbscgn20118.hclt.corp.hcl.in:443
After removing default ports Agent:https://hschbscgn20118.hclt.corp.hcl.in</message>
</record>
<record>
<date>2010-11-18T23:31:12</date>
<millis>1290103272053</millis>
<sequence>85</sequence>
<logger>txkSetSSOReg</logger>
<level>INFO</level>
<class>oracle.apps.fnd.txk.ias.DBUtil</class>
<method>getAgentConfFileId</method>
<thread>10</thread>
<message>Executing: SELECT PREFERENCE_NAME FROM FND_USER_PREFERENCES WHERE PREFERENCE_NAME LIKE 'TXK_SSO_FILE_ID_%' AND PREFERENCE_VALUE = 'https://hschbscgn20118.hclt.corp.hcl.in' AND MODULE_NAME = 'LDAP_SYNCH' AND USER_NAME = '#INTERNAL' </message>
</record>
<record>
<date>2010-11-18T23:31:12</date>
<millis>1290103272054</millis>
<sequence>86</sequence>
<logger>txkSetSSOReg</logger>
<level>INFO</level>
<class>oracle.apps.fnd.txk.ias.DBUtil</class>
<method>getAgentConfFileId</method>
<thread>10</thread>
<message>file id NOT found</message>
</record>
<record>
<date>2010-11-18T23:31:12</date>
<millis>1290103272055</millis>
<sequence>87</sequence>
<logger>txkSetSSOReg</logger>
<level>INFO</level>
<class>oracle.apps.fnd.txk.ias.sso.Instance</class>
<method>updateReqArgs</method>
<thread>10</thread>
<message>Updated Required Arguments Map: -site_name=https://hschbscgn20118.hclt.corp.hcl.in -appspass=******* -config_mod_osso=true -logout_url=https://hschbscgn20118.hclt.corp.hcl.in/OA_HTML/AppsLogoutSSO -home_url=https://hschbscgn20118.hclt.corp.hcl.in -config_file=/data/vis/inst/apps/VIS_hschbscgn20118/ora/10.1.3/Apache/Apache/conf/osso/VIS_hschbscgn20118_osso.conf -update_mode=CREATE -success_url=https://hschbscgn20118.hclt.corp.hcl.in/osso_login_success -cancel_url=https://hschbscgn20118.hclt.corp.hcl.in </message>
</record>
<record>
<date>2010-11-18T23:31:12</date>
<millis>1290103272056</millis>
<sequence>88</sequence>
<logger>txkSetSSOReg</logger>
<level>INFO</level>
<class>oracle.apps.fnd.txk.ias.sso.Instance</class>
<method>ssoReg</method>
<thread>10</thread>
<message>Commmand is : sh /data/vis/apps/tech_st/10.1.3/sso/bin/ssoreg.sh -site_name https://hschbscgn20118.hclt.corp.hcl.in -config_mod_osso true -logout_url https://hschbscgn20118.hclt.corp.hcl.in/OA_HTML/AppsLogoutSSO -home_url https://hschbscgn20118.hclt.corp.hcl.in -config_file /data/vis/inst/apps/VIS_hschbscgn20118/ora/10.1.3/Apache/Apache/conf/osso/VIS_hschbscgn20118_osso.conf -update_mode CREATE -success_url https://hschbscgn20118.hclt.corp.hcl.in/osso_login_success -cancel_url https://hschbscgn20118.hclt.corp.hcl.in</message>
</record>
<record>
<date>2010-11-18T23:31:14</date>
<millis>1290103274625</millis>
<sequence>89</sequence>
<logger>txkSetSSOReg</logger>
<level>INFO</level>
<class>oracle.apps.fnd.txk.ias.sso.Instance</class>
<method>ssoReg</method>
<thread>10</thread>
<message>Return Code is : 1</message>
</record>
<record>
<date>2010-11-18T23:31:14</date>
<millis>1290103274625</millis>
<sequence>90</sequence>
<logger>txkSetSSOReg</logger>
<level>SEVERE</level>
<class>oracle.apps.fnd.txk.ias.sso.Instance</class>
<method>ssoReg</method>
<thread>10</thread>
<message>CLASSPATH=/data/vis/apps/tech_st/10.1.3/jdbc/lib/ojdbc14.jar:/data/vis/apps/tech_st/10.1.3/jlib/repository.jar:/data/vis/apps/tech_st/10.1.3/sso/lib/ossoca.jar:/data/vis/apps/tech_st/10.1.3/sso/lib/ossoreg.jar:/data/vis/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/data/vis/apps/tech_st/10.1.3/jdbc/lib/classes12.jar:/data/vis/apps/tech_st/10.1.3/jdbc/lib/nls_charset12.jar:/data/vis/apps/tech_st/10.1.3/jlib/jndi.jar:/data/vis/apps/tech_st/10.1.3/jlib/ojmisc.jar:/data/vis/apps/tech_st/10.1.3/j2ee/home/jazn.jar:/data/vis/apps/tech_st/10.1.3/j2ee/home/jaas.jar:/data/vis/apps/tech_st/10.1.3/jdk/lib/rt.jar:/data/vis/apps/tech_st/10.1.3/jdk/lib/i18n.jar:/data/vis/apps/apps_st/comn/java/classes/oracle/apps/fnd/jar/fndoid.jar:/data/vis/apps/tech_st/10.1.3/jdbc/lib/ojdbc14.jar:/data/vis/apps/tech_st/10.1.3/jdbc/lib/orai18n.jar:/data/vis/apps/tech_st/10.1.3/jlib/repository.jar:/data/vis/apps/tech_st/10.1.3/jlib/infratool.jar:/data/vis/apps/apps_st/comn/java/classes:/data/vis/apps/tech_st/10.1.3/sysman/webapps/emd/WEB-INF/lib/emd.jar:/data/vis/apps/tech_st/10.1.3/dcm/lib/dcm.jar:/data/vis/apps/tech_st/10.1.3/sysman/j2ee/lib/portalSMI.jar:/data/vis/apps/tech_st/10.1.3/jlib/emConfigInstall.jar:/data/vis/apps/tech_st/10.1.3/lib/dms.jar:/data/vis/apps/tech_st/10.1.3/opmn/lib/ons.jar:/data/vis/apps/tech_st/10.1.3/j2ee/home/oc4j.jar
Parameters passed to SSO registration tool :
param0:-oracle_home_path param1:/data/vis/apps/tech_st/10.1.3 param2:-site_name param3:https://hschbscgn20118.hclt.corp.hcl.in param4:-config_mod_osso param5:true param6:-logout_url param7:https://hschbscgn20118.hclt.corp.hcl.in/OA_HTML/AppsLogoutSSO param8:-home_url param9:https://hschbscgn20118.hclt.corp.hcl.in param10:-config_file param11:/data/vis/inst/apps/VIS_hschbscgn20118/ora/10.1.3/Apache/Apache/conf/osso/VIS_hschbscgn20118_osso.conf param12:-update_mode param13:CREATE param14:-success_url param15:https://hschbscgn20118.hclt.corp.hcl.in/osso_login_success param16:-cancel_url param17:https://hschbscgn20118.hclt.corp.hcl.in
-DinstallType=
-DORACLE_CONFIG_HOME=/data/vis/inst/apps/VIS_hschbscgn20118/ora/10.1.3
-DoldOracleHome=
-DoldOHSUser=root
Check /data/vis/inst/apps/VIS_hschbscgn20118/ora/10.1.3/sso/log/ssoreg.log for details of this registration
SSO registration tool failed. Please check the log file /data/vis/inst/apps/VIS_hschbscgn20118/ora/10.1.3/sso/log/ssoreg.log, correct the problem and re-run the tool.
.end std out.
.end err out.
</message>
</record>
<record>
<date>2010-11-18T23:31:14</date>
<millis>1290103274626</millis>
<sequence>91</sequence>
<logger>txkSetSSOReg</logger>
<level>SEVERE</level>
<class>oracle.apps.fnd.txk.ias.TXKSTDIO</class>
<method>exception</method>
<thread>10</thread>
<message>oracle.apps.fnd.txk.ias.SsoOidException: SSO Partner application could not be registered successfully.
at oracle.apps.fnd.txk.ias.sso.Instance.ssoReg(Instance.java:470)
at oracle.apps.fnd.txk.ias.sso.Instance.registerPartnerApp(Instance.java:690)
at oracle.apps.fnd.txk.ias.Instance.main(Instance.java:88)
</message>
</record>
</log>
can anyone tell me what is the problem

Hi
Please refer doc and do the following steps.
1. Take a copy of the $IAS_ORACLE_HOME/Apache/Apache/bin/iasobf file
2. Change the ORACLE_HOME=to the correct IAS_ORACLE_HOME
3. Re-run the SSO registration by following the three step process
Regards,
Krishna

Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem?

Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem? It works on the iPhone.

It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.

XML file not generate in MOPZ - system has not been registered in SLM

HI,
I need to install EHP4 in ERP 6.0. So to get the xml file i installed solution manager 7.0 EHP1 and post process of EHP1.
ST -400 -21
the important Notes i followed.
==================================================================
Note 1151784 - Setup of SL Controller for Live Update
Note 1145444 - SLM configuration
Note 1277035 - Solution Manager: EHP4 product data missing
Note 1122966 - Maintenance Optimizer: Notes for Enhancement Packages
Note 1137683 - Maintenance Optimizer: Notes for Software Lifecycle Manager
Note 1154188 - SLM web service authentication 700 SP14 ( SERVICE NOT AVAILABLE )
Note 669669 - Updating the SAP Component Repository in the SLD
Note 1244225 - Solution Manager 7.0 EhP 1: recommended corrections
Note 1137683 - Maintenance Optimizer: Notes for Software Lifecycle Manager
=======================================================================
Note 1334252 - SAP Solution Manager - Basic functions SP20 and higher ( this note contain post process of EHP1)
===============================================================
Still i am not getting the xml file of EHP4 for ERP 6.0.
I am getting the error "The system/systems - VMW, has/have not been registered in SLM"
Regards
Lee

hi Ruediger Stoecker ,
But the xml file didn't generate. that's why i worried.
==============================================
I tried with end of selection process in MOPZ upto "END Maintenance" phase. The XML file didn't generate.
Edited by: Lee green on Dec 23, 2009 10:10 AM

I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be

I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be recovered under these circumstances?

If you never bought the product then you cannot get the serial number.

"the activex control for flash player could not be registered" - Solutions Roundup

I recently ran into this problem on my computer:
http://at32.s3.amazonaws.com/flash_install_problems2.jpg
I am a Flash developer (as in I write SWFs, I don't work for Adobe). and when I updated IE to 10.2, "the activex control for flash player could not be registered". Since I am a developer, I also have Firefox and Chrome installed, with Flash running without problems. For a long time now, Internet Explorer has used a different version (ActiveX) to the other browsers, which use plugins. I am a strong supporter of Flash, it's great to develop with and has a very wide feature set which is growing all the time, unlike fixed technologies/standards. However, the weakest part is the install process - I don't understand why their is a Download Manager. Google Chrome does it's best (so far) by managing the install/update process entirely in the background. Anyway, it was in my best interest to try and get to the bottom of this.
For the record, on the problem machine I have Windows 7 with IE8, but I have seen almost identical symptoms with IE9, Windows XP SP3, as well as various iterations of Flash Player (10.0, 10.1, 10.2 and even some final editions of version 9).
First I tried the standard support here:
http://kb2.adobe.com/cps/191/tn_19166.html
Basically, doing the manual uninstall and manual install of the latest version (without using the download manager, or have IE open). This did not work. I also tried the Microsoft "subinacl" program, together with "reset_fp10.bat". This didn't work either. However, you should try all of these things first before progressing further.
A quick note about people who had tried running the following at a command prompt: "secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose"
I didn't do this, because on investigating further it didn't seem to work with Windows 7, only Windows XP, Windows 2000 or Windows 2003 - though there was a few threads where this had fixed the problem for some users.
For my solution, it is recommended you use the manual uninstall / installers, so you should have them downloaded ready to use.
I then heard about problems with permissions in the registry with the key: HKEY_LOCAL_MACHINE\Software\Classes\shockwaveflash.shockwave
So I opened regedit.exe (start - run - typed "regedit.exe"), navigated to the key and sure enough, I couldn't open it - permission denied - even though I had an administrator account. If for some reason, you can access this key (and any subkeys), then it's likely the following fix will not resolve the problem.
I then done further diagnosis, by using Process Monitor to try and install Flash Player, and I got the following:
http://at32.s3.amazonaws.com/flash_install_problems.gif
This shows all the access denied errors the Flash Player install was experiencing when trying to write to the registry key. This confirmed that this was the problem. I only stress this because several people said it was unwise to tinker with the registry. Though this is common advice, this is the only known fix for this precise problem at present, since you need to manually adjust the permissions yourself. I don't know who is at fault here - Microsoft or Adobe - but let's just get Flash fixed...
The solution:
Firstly, you may want to backup your registry, or the exact key. I didn't do this so I've provided no instructions on how to, but it is recommended for the paranoid. Also make sure as much software is closed down as possible - browsers, IM software, any junk in your system tray. As way of example, I happened to have "BBC iPlayer" installed and running in the background which uses Adobe AIR and Flash Player, so I exited that too.
1) Open regedit (start - run - type "regedit.exe"). You may need to right click on it and select "Run As Administrator", but I didn't as my account was already administrator.
2) Navigate to the key. HKEY_LOCAL_MACHINE\Software\Classes\shockwaveflash.shockwave
Click on it to confirm that you cannot access it (you will get an error) - if their are no problems - this probably isn't the cause of your issues.
3) Right click on it and click Permissions, and ignore any message that may pop up.
4) Under "Group or Usernames" click "Add". Type your account name name, or "Administrators" in the box, then "Check Names" to format it correctly, then Ok.
5) Now on the next screen click the checkbox to enable Full Control (this will also automatically enable "Read" permission too).
6) Click Advanced, then the "Owner" tab at the top. You will see that their is no "Current Owner". This is what we will now fix.
7) Click on your name to change the owner to (I went for Administrators). Also enable the checkbox entitled "Replace Owner on subcontainers and objects". Then click Ok. You will get an error message, which you can try clicking Retry to, but hit Cancel - this is not a problem.
8) Click Ok a couple of times and this part of your registry is now fixed.
9) Now it's a simple case of running the manual Flash uninstall program, then finally the manual Flash installer (for Active X - not the Firefox/Chrome plugin versions). To my surprise, after a couple of days looking into this - I finally had a solution and Flash in IE once more. If you are using Firefox too you may find Flash is no longer installed their (the uninstaller removed it). In this case just install via the Adobe site or try to watch a video on You Tube and you will be prompted or linked to the install.
Hope this provides a good round up of the possible solutions to this problem. Hopefully Microsoft or Adobe can find out what causes this issue in the first place so we don't have to go down this route for much longer. Chrome's implementation of Flash shows how effortlessly things can work!

They will stay on the screen. However, Process Monitor is only intended for advanced users. It is recommended that users try to navigate to the troublesome registry key using regedit, and see if they can access it or not without an error. This is far easier than trying to use Process Monitor, which is very complicated.
I used Process Monitor to confirm that it was just that key which was causing the problem, and not others. Process Monitor is not to be confused with the new Resource Monitor which is accessible via Task Manager in Windows 7 (and possibly Vista). If you must experiment (and Process Monitor is very useful for diagnosing many deep-level problems if you know what you're looking for) Process Monitor can be downloaded from here:
http://technet.microsoft.com/en-us/sysinternals/bb896645
It replaces the older Sysinternals "FileMon" and "RegMon". For those interested in the technical side, I had to setup a number of filters to be able to get the results display as in the screenshot. First of all to just show Registry events. Then to just show events from the manual Flash activeX installer executable. The I added a filter to show only non-successfull results. And finally, for the purposes of the screenshot, added a filter to just show those with "Access Denied", since other non-critical errors are also picked up due to missing keys because installation has not yet been fully completed I guess. When experimenting, most of these filters were applied using the "is not" boolean logic, which will make sense if you experiment with the program.
Without adding any filters, it picks up so many events (hundreds per second) that it's otherwise unusable. e.g. 40,000 events within the first few seconds of opening the program. For this reason, I recommend simply using Regedit to diagnose the problem with the particular Flash registry key.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

IP address not UK registered

Similar Messages

Maybe you are looking for