IP address on HP B110 all in one printer

Hi. I set up my HP B110 to run from my network and had an IP address of 192.168.0.9 and everything worked OK. However, the IP address has changed to 169.254.187.43 and can no longer be accessed through the network in addition the printer cannot log on to get apps etc. I have tried reinstalling the network and it finds my router, I enter the key and it says that all is successful and is connected to network. But, when the test report prints it shows the incorrect IP address and not one from my home network.
The printer works fine with a direct USB connection.
Any one able to offer any help. Is it possible to reset the printer back to factory settings so I can start again?
Regards - Graham
This question was solved.
View Solution.

Well that was a short lived problem. I read one of the replies to a similar problem and as a result re-booted my router. All is now OK.

Similar Messages

B110 Inkjet All-in-one printer/scanner

I have a B110 printer which has been working fine until now. Now when I print I get several black vertical smug lines running the full length of the page. Done several cleaning operations of the inkhet print heads including the most intensive and nothing seems to improve it. Any ideas anybody?

Hello again pato_londres,
I do apologize for that document I provided earlier. That is clearly not the one that I wanted to direct you to.
Please click on the following link for Fixing Print Quality Problems for the HP Photosmart Wireless e-All-in-One Printer Series (B110).
I am confident this link will be the proper one to troubleshoot the issue at hand.
Thanks again for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP all-in-one printer app

Trying to get my NEW windows 8 laptop connected to my MFP M276 color printer...
I get to
http://apps.microsoft.com/windows/en-gb/app/hp-all-in-one-printer-remote/94883cdd-504d-4e94-871c-c70...
this eventually asks me to create a Microsoft account. I don't care to have Big Brother Bill Gates be involved in my HP printer driver.
But finding no way around this, I finally try to make one. It asks for an email address, but the domain is restricted to either Hotmail or Outlook! HELLO? Are there only 2 email providers on the planet? I am stunned. Did a single human test this software?
I finally did the traditional search for a driver, not an app, and find one on the HP site.
Lesson... if you're on a laptop, and see the word "app," run as fast as you can.

Hello Seahorse1305,
Welcome to the forums!
I am here to assist you with the printing issue you are having with your Photosmart B210. The first thing I do recommend, is running the HP Print and Scan Doctor to find and fix printing and scanning problems. If there is more of an issue that the tool cannot fix, it will let you know what the problem is.
Please let me know how this turns out for you!
Thanks,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1)?

Printer Model, Notebook or Desktop Model Number: HP Officejet J4680 All-in-One Printer
Operating System (including service pack revision): Windows 7 64-bit Home Premium Service Pack 1
Error messages: None
Recent hardware or software changes made to the system: None
Problem Description: HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1) and a new printer appeared: HPD8D625 (Officejet J4680 series). I don’t know how this all came about or why?
I used the HP HPD8D625 for a while but it took a long time to began to print and only buffered a small amount. I went back to my stand by printer, but know my wife want to use the wireless network to do her printing, so I have to fix it.
Connection Method: Wireless
Diagnostic Summary
Troubleshooting performed: Yes
First Wireless Network Report:
Everything: Passed
Signal Strength: Excellent
Other networks detected matching your network name (SSID): No
Configuration Summary
Network Name: Correct
IP Address: Correct
Config Source: DHCP
Communication Mode: Infrastructure
Authentication Type: WPA-PSK
Encryption: Automatic (AES or TKIP)
Second Wireless Network Report:
Network Name: Was different
Of course that disrupted the whole report.

BH
Thanks for responding. What I did today was hard wire the printer to computer. then was able to get my original printer icon back and it was set as the default printer. I deleted the other icons, they were ghosted and I didn't what to use them. the one was a online printer going back to HP. Now I have to got my son to fix the remaining problem I have, with my messing around I somehow change the Network Name on the printer. He is a computer eng working on high tech cameras and also is the administrator of my machine. He has me locked out of administrative rights and for good reason, I wrecked a couple computers and when he built this one for me that was the rule. There is a little info that I don't have to finalize the last step in changing the Network Name back. I have run the printer from the printer control panel and it did find the correct Network and Network Name but is seemed like that is far as I could go. So I'm not that far from completing this project.
LH

HP Officejet 4630 all-in-one printer Cancels Print in Middle of Job

Hi,
I recently bought an HP Officejet 4630 all-in-one printer, and it automatically cancels jobs in the middle of printing. The computer I am using is an HP Envy dv7 with 64-bit Windows 8, and I am printing over a wireless network connection. My computer receives an error that HP Officejet 4630 series couldn't complete print and the printer simply says canceling. I have tried all the steps in the troubleshooting sections, both for printing issues and network connections. I've uninstalled and reinstalled the software multiple times, I've established a manual IP, and everything else, but nothing seems to work. It also seems to have the issue when using HP ePrint. It happens in all sorts of programs and formats such as word, pdf, and html. Unfortunately, I did not receive a USB cord, so I can't see if that will fix the problem at all. Hopefully somebody can help me with this, otherwise it's obvious that there's a problem with the actual printer I got and I'm going to have to get something else.
Thanks
This question was solved.
View Solution.

This is how I fixed it:
Find out what the IP address is that your printer is using.
Then go to control panel and click on "View Devices and Printers".
Look for your printer an right click.
Click "Printer Properties" and a new screen will open.
Along the top you will see some tabs. Click the one that says "Ports"
Click "Add Port"
Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port". A new screen will open.
Click "Next"
Type in the IP Address of your printer and click "Next"
Your computer should find your printer.
Click "Apply" and your printer should work correctly.

Looking for HP Basic Driver only for hp 2610 all-in-one printer

I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
Regards
Tech

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

HP Photosmart Premium All-in-One Printer - C309g dose it support eprinting

dose
HP Photosmart Premium All-in-One Printer - C309g support eprinting and airprinter
This question was solved.
View Solution.

Hello RetiredHP,
Thanks for the post. Ok, we may have several options here. With ePrint, you can use the mobile app. to print from your printer from any location with your iPad or iPhone. If you have downloaded and installed the app., then check the below. If the ePrint app. is not showing (should look like icon below), check the link below these steps. The 2nd link provides some additional information. The key is to ensure that both your iPad and the printer are on the same network. Good Luck!
Figure 3: HP ePrint mobile app icon
If prompted, provide your iTunes account information, and then click Get. iTunes automatically installs the app on your mobile device.
Step two: Activate the mobile app (optional)
Why should I activate the mobile app?
If you activate, you unlock all the features of the HP ePrint mobile app. You can print to any HP ePrint-enabled printer (to which you have been given access) from anywhere your mobile device has Internet access. You can also print Microsoft Office documents and Web pages, or save the Web pages to print later. HP ePrint mobile app even helps you with HP printer setup and lets you monitor the status of your print jobs.
If you do not activate, you can still print directly to your supported Wi-Fi-enabled HP printer, but only when your mobile device is connected to the same Wi-Fi network. You can print photos, images, PDFs, and text files saved on your mobile device.
Use the following steps to activate the mobile app.
On your Apple device, tap the HP ePrinticon, and then tap Activate.
Type your email address in the Activate using your emailbox, and then tapActivate. The HP ePrint service sends you an email containing an Activation Code.
Check your email, and then write down the Activation Code sent by the HP ePrint service.
On the Apple device, press the Home button ( ) twice, and then tap HP ePrint.
Type the Activation Code into the box, and then tap Activate.
The app displays a message to confirm activation.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01616126&lc=en&product=3793676&tmp...
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02759940&lc=en&product=3793676&tmp...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04395332&tmp_task=useCategory&cc=us&dlc=en&lc=e...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

HP Deskjet 3520 e-All in one printer trouble with scanning network, connection and very slow print

Dear all
I bought two days ago HP Deskjet 3520 e-All-in one printer serie, but i have some really bad issues with the scanner! I have searched on the internet and i couldn’t find anything to solve the problem.
I have installed the printer according to the book of the printer, so everything did go well(i think), except that i can’t connect the scan to my computer, a Mac OS X (i am connected with the printer). I get directed to the website where i can connect the scanner, but every time i try to connect it with wi-fi, i get two notification, one from my computer (from HP Itility (Dutch) program) that the connection is off and second from the website that i have to make sure that i’m connected with internet (which i am) and to check the IP address if it is the same with my computer (which is the same).
Obesely something did go wrong, but i can’t find the problem.
Beside when its copy or prints a document (no matter how many pages) it’s very slow. It takes 10 -15 minutes till the printer starts. Has it something to do with the problem i’ve got with the scanner or is the printer always so slow? Because the very first time, when i installed the printer, it printed very fast.
By the way i also print the test-results to check if there is a problem, but according to test-results there are no problems at all.
I hope that someone recognize this problem and can help me to solve it.
Regards,
Esra

Hello chesterpascual,
Welcome to the HP Support Forums!
Regarding the Deskjet 3520 and the error to use setup cartridges, you will need to call HP's Technical Support to see about sending some to you.
Click here to locate the contact information.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Officejet 7310xi All in One Printer no longer connects wirelessly

Hello all,
My Officejet 7310xi All in One Printer no longer connects wirelessly.
The printer does no show up while searching for it wirelessly where it had previously.
In the past it would say that the printer (HP Series 7300) was offline. I would remove the device through the control panel and search again. A printer would be found as HP Series 7300 (Copy 1) . A "ghost" of the original would remain as an offline device. I would default to the new printer icon, Copy 1, and it would work. This happened over the course of a year without any problems.
Now nothing is working. The printer can't be found by my network. I tried downloading drivers, etc. from HP but they either can't download or stop during installation. I don't know if an Windows 8.1 update affected it.
Although the printer has a built in network set up option, it has no installation wizard. I can't find a way to activate the wireless feature/icon. There is no I.P. address either.
I feel like a monkey pulling levers for a banana! I appreciate your help.

Hey @Kathlanta ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I understand you are having issues with your HP Officejet 7310xi connecting and staying on your network. Going through all of this is making you feel much like this;
By the end of this I want you feeling more like this;
Now let's get to the bottom of this and have some fun doing it! (and no, I have not completely adopted the idea that you are a monkey, but for the time being, seems most fitting LOL )
Ok, so what we are going to start with here is; a full print system uninstall and reinstall and run it through USB to test the printers functionality.
Here is how you uninstall the whole printer software on 8.1 >> Uninstalling The Printer
Here is how you install the drivers offline (use the appropriate links to get your steps) >> Installing HP Printer Software for a USB Connection in Windows 8
You wont need to worry about the wireless right yet until we figure out if the rpinter hardware is ok or not. So sit tight on that portion, I'll get that all back and working later after we figure this stuff out now.
Look forward to hearing back from you! Have a good one!
I worked for HP.

All in One printer issue with Windows 8.1 update

Hi all,
Hoping someone out there may be able to help with the following.
I have a Canon MG8250 all in one printer/scanner. All was fine on Windows 8, but then upgraded to 8.1 a couple of weeks ago. Just got round to using the printer and scanner and the printer wouldn't work (scanner was fine). Uninstalled MP drivers and reinstalled from Canon site and all seemed fine with the printing. Alas the scanner now would not work. Did the same, uninstalled MP Navigator Ex and reinstalled from Canon site, but no fix this time. PC says "Cannot start MP Navigator Ex" and printer says "Set PC to start scanning".
Anybody know how to fix?
Thanks,
Peter

Hi @louielou581 ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the email address in your post. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Problems printing to HP officejet 6500A plus e-All-in-one printer e710n

Hi,
I am struggling to print to my " HP officejet 6500A plus e-All-in-one printer e710n". According to the setup network test (Wireless network test report), everything is successful (status "PASS" for all fields). I also checked that the IP configured is the same as the IP displayed on the printer when i push the wireless button (updated via "Update IP address").
I have a laptops as well as netbooks connected to the wireless network. All these devices could previously print, however now none of them can. When i run the diagnostics (both the standard trouble shooter, as well as the one from microsoft when clicking on the fixit option), no problems are detected. When checking the device manager, i can see no conflicts.
When i open the printer control panel and click on "Customize your printer" and then go to "Ports" and click on the "configure port" option, i get an error "An error occurred during port configuration. Operation could not be completed (error 0x0000007b).".
Please assist with any suggestions.

I was able to resolve the problem.
I reinstalled the printer on one of my other laptops (this might have cleared up an error on the printer). I think the true problem is related to the fact that we left the printer on, we've started switching it off when not in use. Even though it goes into sleep mode, it seems to cause problems over time if not switched off on the printer itself.
The basics i did was check the network connection, printed a status of the network connectivity (you can do that from your control panel on the printer). If the network looks good, then try leaving your printer off for an hour or so, if that doesn't work, try reinstalling the printer on your device and start switching it off after use. I know it sounds crazy, but that's what i've been doing and haven't had a problem since.
It was a strange problem, in some cases i wasn't able to see the printer from devices that previously could, when the devices that could see the printer tried to print, it would print okay for a few pages and then start printing garbage, followed by failing completely and cancelling the print. When this happened there would be an error on the device saying it cannot connect to the printer, even though it could at the start of print.

Officejet 6500A Plus e-All-in-One Printer - E710n Sharing without a homegroup

Hi,
I have a HP netbook DV7 with Windows 7. A Dell 15R 5520 (the last of the netbooks) with Windows 7 and a HP 6500A all in one printer. I would like to use the printer on both computer wirelessly without creating a homegroup. Is this possible? If so I would appreciate any help on the setup.
Thanks!

Hi,
As long as printer is connected to a router and has a valid IP address, computers connected to the router will be able to access the printer even if there 2 or more computers connected to the router.
Please refer following link for more info.
http://www.hp.com/global/us/en/wireless/printer-setup-help.html
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

HP Officejet 6500A Plus e-All-in-One Printer - E710n wireless print and web app problem

We have an HP Officejet 6500A Plus e-all-in-one Printer - E710n and run Windows 7 on our laptop.
I have run the wirelss setup wizard and have successfully connected the printer to the router, and both the laptop and printer are on the same network and have identical SSID.
However, we can not send any prints the printer wirelessly. We have to hook it up to the USB to do so. We are also unable to access our web apps; pressing the app button on the printer control panel brings up the following:
"Connection error. The printer was unable to connect to the server. Check your internet connection and try again."
I have run through the suggested solutions under "A Network Connected Printer Cannot Access Print Apps, Web Services, or ePrint" in the customer care help centre which didn't work, although when I tried to enter the IP address under IPv4 into the browser address bar it timed out. I tried the HP Print and Scan Doctor, but it returns a result that suggests everything is fine.
I turned off the firewall and tried again with no luck.
I really am at a loss now. Diagnostics say it should work, but it doesn't. Help!

Disable Bitdefender altogeher and try again.
Also, see this: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02251103
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.

Can you help me out?
I have an HP Officejet Pro 8600 N911a
When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
I am running OS X Yosemite 10.10.
My printer's firmware is "up to date" as of 28-Aug-2014.
This is what I did:
1. Open System Preferences from the Apple menu.
2. Click on the Printers & Scanners icon.
3. Click on the + sign under the list of printers to add a printer
4. Click on IP
5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
6. Ignore Protocol field (default is Line Printer Daemon - LPD)
7. Ignore Queue field (default is blank for default queue)
8. Ignore Name field (default is IP address)
9. Ignore Location field (default is blank)
10. Under the Use dropdown menu, I select "Select Software"
11. HP Deskjet 9800 is not an option.
I searched for 9800, but there is no HP printer with that number in the options.
I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
Selected File > Page Setup from menu
Under the Paper Size drop down menu, I selected manage custom size.
- Click + to add a paper size
- Enter "2.75" in width and "6 in" height in the paper size fields.
- Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
- Double-clicked Untiled in the custom size list and rename the size as Receipt
- Click OK to return to the Page Setup dialog box
Under Settings: Page Attributes:
- Format for "HP Officejet Pro 8600"
- Paper size: Receipt
- Orientation: "tall/portrait"
- Scale: 100%
- Click OK
Select Format > Document and set all page margins to 0.25"
Thank you.

Cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet

I cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet... at least I think that is the problem. I have followed all the instructions on HP Print and Scan Doctor as well as Troubleshoot HP Installation Failure. My router is running fine for everything else and I have entered the static address for the printer into the router. It appears that my printer believes it is connected to my WiFi (Ihave WPS it multiple times), but when I type it's IP address into my IE nothing shows up. My router doesn't appear to see the printer either. I have the latest driver installed on my computer. I suspect this may be a router issue: new router Asus Double 450 Mbps N Router (Dual band - but it appears my router is using the 2.4Hz band to communicate with WPS). Windows 7 64.
Any help is appreciated!
This question was solved.
View Solution.

Hello NRHII,
Welcome to the HP Forums!
I understand you're unable to connect the Officejet 8600 over a wireless connection. I will do my best to assist you! I would recommend power cycling the router, printer and computer:
1) Turn off your printer
2) Disconnect the power cord from the back of the router
3) Restart your computer
4) Wait less than 60 seconds, plug the power cord back into the router
5) Turn your printer back on, wait for the computer to turn on
Is the wireless light blinking on your printer? If so, please reconnect the wireless on your printer by using the wireless setup wizard: (This information is stated here.)
On the printer touch screen, touch the Right Arrow ( ) to display the second navigation screen.
Touch the Setup icon ( ).
Touch Network , touch Wireless Setup Wizard , and then touch Continue . The printer searches for available networks.
Touch the name of your network, and then touch OK .
If prompted, enter the network password, and then touch OK . The printer connects to the network.
Also, as I was typing this post TreeFrog posted some great information to follow.
Have you followed this entire HP document on Printer Does Not Maintain Wireless Connection? If not, follow this document. Please post your results, as I will be looking forward to hearing from you.
Have a great day!
I worked on behalf of HP.

IP address on HP B110 all in one printer

Similar Messages

Maybe you are looking for