Ip address problems with installing wireless routers

Sorry call me silly I am not very good at this computer stuff and for some reason my family thinks that I am . Lord help me lol.
The problem that I am having is that my sister purchased a laptop computer and she unhooked for internet from the desktop and plugged it into the laptop for internet. Now the desk top is telling me that it needs a new ip address. So I released the old address and left everything unhooked over night and there is still no change. Still getting the same messages.
Now to add more confusion into the game for me, they are now asking me to hook up a wireless router so that they are able to have both computers working.
I am not really sure how to go about going in to set up the computers allowed to use the wireless router.
So I am looking at trying to get a computer a new ip address (which internet is still working fine on the laptop) and trying to set up a wireless router for them. \
Is this possible without having to contact the cable company and speaking to people for hours that doesn't know how to speak the same language as me?
The wireless router is a linksys wireless -g 2.4 ghz.
Any and all help will be greatly appreciated.

What is the model number of the wireless router?
The Internet is working fine on the laptop. Is your laptop connected to the modem or it is connected to the wireless router?
If the laptop is connected directly to the modem then you will need to configure the wireless router. Follow this link to configure the router.
If your laptop is connected to the wireless router and the modem is also connected to the router then you can access the router setup page and check the wireless settings of the router. If your laptop is wireless then you can connect to the wireless network on the laptop. Disconnect the laptop from the router and connect the connect the desktop to the router.

Similar Messages

  • [SOLVED] Problem with installing wireless driver (Boradcom)

    Hi!
    I am trying to install the driver for my wireless card: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02).
    And I found this driver: www.broadcom.com/support/ethernet_nic/netlink.php, and I'm trying to follow the instructions included in the README, but when i run make, i get this:
    [stian@stian tg3-3.110g]$ make
    sh makeflags.sh > tg3_flags.h
    grep: /include/linux/kernel.h: No such file or directory
    grep: /include/linux/types.h: No such file or directory
    grep: /include/linux/types.h: No such file or directory
    grep: /include/linux/types.h: No such file or directory
    grep: /include/linux/slab.h: No such file or directory
    grep: /include/linux/delay.h: No such file or directory
    grep: /include/linux/delay.h: No such file or directory
    grep: /include/linux/skbuff.h: No such file or directory
    grep: /include/linux/pci.h: No such file or directory
    grep: /include/linux/pci.h: No such file or directory
    grep: /include/linux/pci.h: No such file or directory
    grep: /include/linux/pci.h: No such file or directory
    grep: /include/linux/pci.h: No such file or directory
    grep: /include/linux/pci.h: No such file or directory
    grep: /include/linux/pci.h: No such file or directory
    grep: /include/linux/pci.h: No such file or directory
    grep: /include/linux/pci.h: No such file or directory
    grep: /include/linux/if_ether.h: No such file or directory
    grep: /include/linux/ethtool.h: No such file or directory
    grep: /include/linux/ethtool.h: No such file or directory
    grep: /include/linux/ethtool.h: No such file or directory
    grep: /include/linux/skbuff.h: No such file or directory
    grep: /include/linux/skbuff.h: No such file or directory
    grep: /include/linux/ip.h: No such file or directory
    grep: /include/net/ip.h: No such file or directory
    grep: /include/linux/tcp.h: No such file or directory
    grep: /include/linux/tcp.h: No such file or directory
    grep: /include/linux/netdevice.h: No such file or directory
    awk: cmd. line:1: fatal: cannot open file `/include/linux/netdevice.h' for reading (No such file or directory)
    makeflags.sh: line 165: [: too many arguments
    grep: /include/linux/netdevice.h: No such file or directory
    grep: /include/linux/netdevice.h: No such file or directory
    grep: /include/linux/netdevice.h: No such file or directory
    grep: /include/linux/etherdevice.h: No such file or directory
    grep: /include/linux/netdevice.h: No such file or directory
    grep: /include/linux/netdevice.h: No such file or directory
    grep: /include/linux/netdevice.h: No such file or directory
    grep: /include/linux/if_vlan.h: No such file or directory
    make -C SUBDIRS=/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g modules
    make: *** SUBDIRS=/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g: No such file or directory. Stop.
    make: *** [default] Error 2
    What does this mean? (Yes I am very new to Arch, and Linux in general, but I want to learn!)
    All help is appreciated!
    Last edited by sudo make sandwich (2010-11-20 20:05:34)

    Thanks for fast reply!
    After I installed kernel26-headers, and tried to do 'make' again i got the following:
    [stian@stian tg3-3.110g]$ make
    make -C /lib/modules/2.6.35-ARCH/build SUBDIRS=/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g modules
    make[1]: Entering directory `/usr/src/linux-2.6.35-ARCH'
    CC [M] /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.o
    In file included from /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.h:13:0,
    from /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:94:
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:50:13: error: conflicting types for 'bool'
    include/linux/types.h:34:17: note: previous declaration of 'bool' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:56:13: error: redefinition of typedef '__le32'
    include/linux/types.h:170:25: note: previous declaration of '__le32' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:57:13: error: redefinition of typedef '__be32'
    include/linux/types.h:171:25: note: previous declaration of '__be32' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:61:23: error: conflicting types for 'resource_size_t'
    include/linux/types.h:188:21: note: previous declaration of 'resource_size_t' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:86:21: error: conflicting types for 'kzalloc'
    include/linux/slab.h:319:21: note: previous definition of 'kzalloc' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:109:28: error: static declaration of 'jiffies_to_usecs' follows non-static declaration
    include/linux/jiffies.h:297:21: note: previous declaration of 'jiffies_to_usecs' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:122:22: error: static declaration of 'usecs_to_jiffies' follows non-static declaration
    include/linux/jiffies.h:299:22: note: previous declaration of 'usecs_to_jiffies' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:137:22: error: static declaration of 'msecs_to_jiffies' follows non-static declaration
    include/linux/jiffies.h:298:22: note: previous declaration of 'msecs_to_jiffies' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:173:13: error: static declaration of 'msleep' follows non-static declaration
    include/linux/delay.h:46:6: note: previous declaration of 'msleep' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:185:22: error: static declaration of 'msleep_interruptible' follows non-static declaration
    include/linux/delay.h:47:15: note: previous declaration of 'msleep_interruptible' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:242:22: error: static declaration of 'pci_ioremap_bar' follows non-static declaration
    include/linux/pci.h:1373:15: note: previous declaration of 'pci_ioremap_bar' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:504:0: warning: "dma_unmap_addr" redefined
    include/linux/dma-mapping.h:221:0: note: this is the location of the previous definition
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:508:0: warning: "dma_unmap_addr_set" redefined
    include/linux/dma-mapping.h:222:0: note: this is the location of the previous definition
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:512:27: error: static declaration of 'pci_choose_state' follows non-static declaration
    include/linux/pci.h:810:13: note: previous declaration of 'pci_choose_state' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: In function 'pci_choose_state':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:515:2: error: incompatible types when returning type 'pm_message_t' but 'pci_power_t' was expected
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: At top level:
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:520:13: error: conflicting types for 'pci_pme_capable'
    include/linux/pci.h:811:6: note: previous declaration of 'pci_pme_capable' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:539:12: error: conflicting types for 'pci_enable_wake'
    include/linux/pci.h:821:19: note: previous definition of 'pci_enable_wake' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:565:12: error: static declaration of 'pci_set_power_state' follows non-static declaration
    include/linux/pci.h:809:5: note: previous declaration of 'pci_set_power_state' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:638:19: error: static declaration of 'pcie_set_readrq' follows non-static declaration
    include/linux/pci.h:791:5: note: previous declaration of 'pcie_set_readrq' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:678:1: error: conflicting types for 'pci_read_vpd'
    include/linux/pci.h:838:9: note: previous declaration of 'pci_read_vpd' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:933:19: error: redefinition of 'skb_transport_offset'
    include/linux/skbuff.h:1366:19: note: previous definition of 'skb_transport_offset' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: In function 'skb_transport_offset':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:935:19: error: 'const struct sk_buff' has no member named 'h'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: At top level:
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:940:29: error: redefinition of 'ip_hdr'
    include/linux/ip.h:110:29: note: previous definition of 'ip_hdr' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: In function 'ip_hdr':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:942:12: error: 'const struct sk_buff' has no member named 'nh'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: At top level:
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:947:28: error: redefinition of 'ip_hdrlen'
    include/net/ip.h:47:28: note: previous definition of 'ip_hdrlen' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:954:30: error: redefinition of 'tcp_hdr'
    include/linux/tcp.h:213:30: note: previous definition of 'tcp_hdr' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: In function 'tcp_hdr':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:956:12: error: 'const struct sk_buff' has no member named 'h'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: At top level:
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:961:28: error: redefinition of 'tcp_optlen'
    include/linux/tcp.h:223:28: note: previous definition of 'tcp_optlen' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1193:20: error: redefinition of 'skb_copy_from_linear_data'
    include/linux/skbuff.h:1864:20: note: previous definition of 'skb_copy_from_linear_data' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1202:13: error: redefinition of typedef 'netdev_tx_t'
    include/linux/netdevice.h:111:24: note: previous declaration of 'netdev_tx_t' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1263:20: error: redefinition of 'netif_tx_lock'
    include/linux/netdevice.h:1944:20: note: previous definition of 'netif_tx_lock' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: In function 'netif_tx_lock':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1265:16: error: 'struct net_device' has no member named 'xmit_lock'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1266:5: error: 'struct net_device' has no member named 'xmit_lock_owner'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: At top level:
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1269:20: error: redefinition of 'netif_tx_unlock'
    include/linux/netdevice.h:1972:20: note: previous definition of 'netif_tx_unlock' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: In function 'netif_tx_unlock':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1271:5: error: 'struct net_device' has no member named 'xmit_lock_owner'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1272:18: error: 'struct net_device' has no member named 'xmit_lock'
    In file included from /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.h:13:0,
    from /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:94:
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: At top level:
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1393:8: error: redefinition of 'struct netdev_hw_addr'
    include/linux/netdevice.h:222:8: note: originally defined here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1397:0: warning: "netdev_for_each_mc_addr" redefined
    include/linux/netdevice.h:254:0: note: this is the location of the previous definition
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1489:11: error: redefinition of 'mii_resolve_flowctrl_fdx'
    include/linux/mii.h:265:18: note: previous definition of 'mii_resolve_flowctrl_fdx' was here
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_napi_disable':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:806:2: error: implicit declaration of function 'netif_poll_disable'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_napi_enable':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:818:2: error: implicit declaration of function 'netif_poll_enable'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_tx':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:4773:6: error: implicit declaration of function 'dma_unmap_addr'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:4773:25: error: 'mapping' undeclared (first use in this function)
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:4773:25: note: each undeclared identifier is reported only once for each function it appears in
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_rx_skb_free':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:4825:48: error: 'mapping' undeclared (first use in this function)
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_alloc_rx_skb':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:4891:2: error: implicit declaration of function 'dma_unmap_addr_set'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_recycle_rx':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:4936:31: error: 'mapping' undeclared (first use in this function)
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_rx':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5007:34: error: 'mapping' undeclared (first use in this function)
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5175:4: error: implicit declaration of function 'netif_rx_schedule'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_poll':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5502:4: error: implicit declaration of function 'netif_rx_complete'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5516:27: error: 'struct net_device' has no member named 'quota'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5517:24: error: 'struct net_device' has no member named 'quota'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5522:9: error: 'struct net_device' has no member named 'quota'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tigon3_dma_hwbug_workaround':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5993:7: error: 'mapping' undeclared (first use in this function)
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_free_rings':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:6782:27: error: 'mapping' undeclared (first use in this function)
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function '__tg3_set_rx_mode':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:9885:3: error: 'struct net_device' has no member named 'mc_list'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:9885:3: error: dereferencing pointer to incomplete type
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:9885:3: error: dereferencing pointer to incomplete type
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_run_loopback':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:11373:55: error: 'mapping' undeclared (first use in this function)
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_init_one':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:15363:5: error: 'struct net_device' has no member named 'poll'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:15364:5: error: 'struct net_device' has no member named 'weight'
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'pci_choose_state':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:516:1: warning: control reaches end of non-void function
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'ip_hdr':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:943:1: warning: control reaches end of non-void function
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tcp_hdr':
    /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:957:1: warning: control reaches end of non-void function
    make[2]: *** [/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.o] Error 1
    make[1]: *** [_module_/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g] Error 2
    make[1]: Leaving directory `/usr/src/linux-2.6.35-ARCH'
    make: *** [default] Error 2
    Leaves me blank :S

  • Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update:

    Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update - I was anxious to download the update to see if it addressed the sticky trackball problems and the low volume issue when using a blue tooth device. However, in the process of updating my BB Tour yesterday, the install stopped on the 8th out 12 updates. After a couple of 'retrys', the BB error message on the desktop came up which instructed me to: i) disconnect the device, ii) restart the computer. iii) restart the loading process and, iV) restore my data by loading the loader back-up file using Restore. Unfortunately my Tour was left without any software and the Desktop manager couldn't recognize it. The error message on the Tour was 503. Called Verizon Wireless tech and bottom line, the only fix is a new Tour, which they're sending me. Anyone else having issues with the update? Also, does it address the trackball and blue tooth issues?

    I had issues with the trackball and had to have my Tour replaced.  I was told this model does not have a removable trackball so the entire phone has to be replaced.  My current one is working OK but does stick a bit.  Seems to get worse over time.  My wife's tour is newer and so far she is not experiencing the problem.  Have not experienced a problem with the Blue Tooth volume.
    I have another issue with this upgrade that I am wondering if anyone else has seen.  My wife has the Tour as well.  She was prompted to do the upgrade and went through it.  It appeared to work except it blew out her Contact Alerts.  When we put them back in we can no longer get the sound to play when she receives an SMS message in her holster. Vibration works but doesn't do any good when it is in her purse.  Phones calls, calendar alerts, alarms all work in holster.  As soon as we delete the contact alert the default SMS alert will play in the holster.  If she takes her phone out of the holster the Contact alert will play.  My phone is still running 4.7.1.40 and this function works fine.  I am thinking about trying to put her's back to my version if possible but not sure the best way to go about this 

  • Problem with installing CUCM on MCS-7816-I5

    Hi to all.
    I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5  (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
    I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
    Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
    Here is some details from log file generated with this Firmware Update Utility 3.6.5:
    ==============
    Initial Selection
    Machine Type: 4251 OS: SLES 10 Arch: 64 bit
    IsPartition: 0
    Update:   IBM System x uEFI update for x3200 M3 /3250 M3
    Severity: Critical
    Reboot:   Reboot Required to take effect
    UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
    Version:  1.08 (GYE142A)
    Install:  1.06 (GYE135A)
    Select:    Yes
    Update:   IBM Dynamic System Analysis
    Severity: Recommended
    Reboot:   Reboot Required to take effect
    UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
    Requisite:None
    Version:  3.20 (DSYT75X)
    Install:  3.01 (DSYT60K)
    Select:    Yes
    Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
    Severity: Critical
    Reboot:   Not Required
    UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
    Requisite:None
    Name:     WD2502ABYS-23B7A0 (/dev/sg0)
    Version:  02.03B07
    Install:  02.0
    Select:    Yes
    Update:   Integrated Management Module Update
    Severity: Critical
    Reboot:   Not Required
    UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
    Version:  1.22 (YUOO84C)
    Install:  1.10 (YUOO57H)
    Select:    Yes
    IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
    (C) Copyright IBM Corp. 2009,2010  All Rights Reserved.
    LAN-over-USB device not configured.
    Error connecting to IMM using IP address 169.254.95.118.
    Please verify the LAN over USB interface is configured properly and active.
    Error flashing firmware: 3
    IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
    (C) Copyright IBM Corp. 2009,2010  All Rights Reserved.
    Refreshing LAN-over-USB IP address.  This may take several minutes.
    Attempting to discover the IMM(s) via SLP.
    Error connecting to IMM using IP address 169.254.95.118.
    Please verify the LAN over USB interface is configured properly and active.
    Error flashing firmware: 10
    (C) Copyright IBM Corp.2010. All Rights Reserved.
    FdrvWL -- Flash Drive(s)                                     3.10.08.19
       1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
    AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
      0(onBoard)           1       0   0    0          0
                           1       0   0    0          0 Error(s)
    Update completed successfully.  <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
    IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
    (C) Copyright IBM Corp. 2009,2010  All Rights Reserved.
    Refreshing LAN-over-USB IP address.  This may take several minutes.
    Attempting to discover the IMM(s) via SLP.
    Error connecting to IMM using IP address 169.254.95.118.
    Please verify the LAN over USB interface is configured properly and active.
    Error flashing firmware: 10
    ===========================
    Thanks,
    Sinisa.

    Hi Sinisa,
    It almost sounds like this bug;
    CSCtn81201
    Incorrect "Hardware Configuration Error" due to hardware setup errors
    Symptom:
    Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
    Conditions:
    in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
    Workaround:
    change the in-band usb interface settings to enabled.
    Related Bug
    Status
    Fixed
    Severity
    4 - minor
    Last Modified
    Aug 17,2011
    Product
    Cisco Unified Communications Manager (CallManager)
    Platform
    Dependent
    Technology
    nav
    1st Found-in
    8.6(0.99081.3)
    Fixed-in
    8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
    Cheers!
    Rob

  • Problem with install on new compy, something to do with external?

    Hello, so I have been having a few problems with installing Arch on my new computer. On my old laptop I never ran into this problem on any distro of LINUX I installed, nor on any other of the systems I have installed Arch on. I believe it might have something to do with the fact that I am running the live cd off of an external dvd drive maybe? I am kind of stuck here, so any help would be greatly appreciated! Thanks!
    If it helps
    System Specs:
    Motherboard: ASROCK 890FX Deluxe3
    Processor: AMD Phenom II X4 955
    Graphics Card: ATI Radeon HD 5700 Series
    Hard Drives: 2 SATA 160gb hd RAID 0, and one 160gb ATA hd
    OS: Windows 7 Professional on the RAID 0, hoping to put ARCH on the ATA (I have tried booting the ATA first in the list behind the USB DVDROM to no avail)
    External Drive: Sony DVD/CD RW drive DRX-510UL
    External DVDROM is the exact same drive I used to install windows 7 professional.
    External DVDROM is plugged into one of my USB 2.0 ports, but the error still persists.
    I am using the EXACT same disk I used when installing it on my past computer.
    Trying to install x86_64 version of Arch, gets past the splash.
    Output that I could catch:
    :: Running Hook [archiso]
    :: Rinning Hook [archiso_pxe_nbd]
    :: Mounting tmpfs, size 75%... done.
    :: Waiting for boot device...
    Waiting 30 seconds for device /dev/disk/by-label/ARCH_201005 ...
    usb 9-1 : device descriptor read/64, error-62
    usb 9-1 : new full speed USB device using ohci_hcd and address 3
    usb 9-1 : device descriptor read/64, error-62
    usb 9-1 : device descriptor read/64, error-62
    usb 9-1 : new full speed USB device using ohci_hcd and address 4
    usb 9-1: device not accepting address 4, error -62
    usb 9-1 : new full speed USB device using ohci_hcd and address 5
    usb 9-1: device not accepting address 5, error -62
    hub 9-0:1.0: unable to enumerate USB device on port 1
    scsi 6:0:0:0: CDROM        SONY        DVDRW DRU-510A 1.0d PQ: 0 ANSI: 0
    scsi 6:0:0:0: Attached scsi generic sg3 type 5
    sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    ERROR: boot device didn't show up after 30 seconds...
        Falling back to interactive prompt
        You can try to fix the problem manually, log out when you are finished
    /bin/sh: can't access tty; job control turned off
    If you need any other info, I can grab it of course.
    Last edited by crusniknano (2010-07-12 19:49:13)

    K, got it running. was having errors with the USB hd, but just changed the name it booted from to the name of the drive. thanks!

  • Window 8 WiFi problem with Cisco wireless network

    Anyone encounter a Windows 8 WiFi authentication problem with Cisco wireless network?
    We are using WLC 5508, 7.2.111, and AP 3602i with WPA2.
    Sent from Cisco Technical Support iPad App

    This problem occurred with Soney, and Dell models.  Lenovo with Windows 8 factory installed is working fine.
    Won't make any difference as these laptop's wireless NIC cards are different.
    Can you try with OPEN authentication.  If the Sony and/or Dell laptop works, then you start cranking up the security and/or encryption settings until you break them.
    I'm with Scott here:  It's got to be a wireless NIC card driver.
    As what George has stated, post the debug of the failed attempts.

  • I'm having problems with a wireless Logitech mouse

    Since upgrading to ML i'm having problems with a wireless Logitech mouse that worked well prior to the update. I'm using the current Logitech Control Center software. No other mouse software is on my Mac Mini. If I use a Guest Aacount the problems ( wheel and back button ) are not present. Any suggestions?

    You might try the Logitech support site. There are communities on there:
    http://www.logitech.com/en-us/support/keyboard-mice-combos
    Here is a link to drivers:
    Logitech Drivers
    You might check your home folder/Library to see if you can find a Logitec .plist.
    You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder "Go To Folder" command. Enter ~/Library. Delete the .plist(s) for the mouse.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
    You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.

  • Problem with installing and uninstalling applicati...

    hi all,
    I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
    Regards
    Alex

    You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
    I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
    Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

  • Problem with installing Elements - from noob

    I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

    Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
    as per this:
    http://forums.adobe.com/message/4474236#4474236

  • Problem with installing iTunes

    So these are my problems with installing iTunes.
    At first it was :
    A required iTunes component is not installed.Please repair or reinstall iTunes (-45019)
    Then it got worse as it would not even open and these would appear:
    The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem.
    and this would appear:
    iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 126)
    I reinstalled maybe about 5 times or more...
    If I thought I solved the above problem, this would appear:
    iTunesHelper.exe is not installed on my computer.
    I seen other people comment that you should unistall and restart the computer and install the setup again, but it does not work..
    And others would say to repair the AAS or iTunes etc..
    And after trying all these it does not work???
    What else works?

    I also tried repairing the Microsoft NET.

  • Problem with Installing Nokia Ovi Store in E51

    I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.

    Hi there! 
    This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
    Hope tis' Help! 
    "If you think this post is helpful, please click on the green button"

  • Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

    Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
    I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
    TIA,
    Jerry

    Thanks, Martin.
    Good to hear someone has had success. The lack of it here is frustrating and depressing.
    Thanks again,
    Jerry

  • Severe problem with installing and starting Audio-DVD Pla

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

  • Problems with installing HP OfficeJet Pro L7590 driver All-in-One

    Hello HP team.
    Having problem with installing driver for HP Officejet pro L7590.
    Starting the process the process bar goes to the end 100% and then disappear.
    After that nothing happens.
    Rebooting doesn't help.
    Windows 7-64

    Thanks for getting back to me!
    Lets try some more steps:
    Uninstall, level 3 for HP PC or level 4 for non-HP PC.
    1. Click Start and type %temp% in the run field and click OK.
    2. Look for, and open the folder starting with 7z (Example: 7zS2356) (if there is more than one 7z folder, try the most recent one)
    3. Open folder Util
    4. Open folder CCC
    5. Run the uninstall_ L4.bat for a non-HP PC or run the Uninstall_L3.bat for a HP PC
    6. When the uninstall has completed restart the computer
    Try to install again using the HP Printer Install Wizard for Windows
    Let me know how this goes please
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

    i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

    Try downloading the trial. It ought to detect that you have a 64-bit system.
    You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

Maybe you are looking for