IP address wise login detail

Hi,
I want to know the last login detail in SAP for a particular IP address / terminal
How can i get this information?
Regards
Kalpesh

You can get that information from SM20 Security Audit Log.
Regards
Juan

Similar Messages

Hello, i have been sent the following email from apple: - You've taken the added security step and provided a rescue email address. Now all you need to do is verify that it belongs to you... and asks for apple login details, is this a genuine request?

Hello, i have been sent the following email from apple, see below and asks for apple login details, is this a genuine request?
Thank you.
You’ve taken the added security step and provided a rescue email address. Now all you need to do is verify that it belongs to you.
The rescue email address that you gave us is [email protected]
Just click the link below to verify, sign in using your Apple ID and password, then follow the prompts.
Verify Now >
The rescue email address is dedicated to your security and allows Apple to get in touch if any account questions come up, such as the need to reset your password or change your security questions. As promised, Apple will never send any announcements or marketing messages to this address.
When using Apple products and services, you’ll still sign in with your primary email address as your Apple ID.
It’s about protecting your identity.
Just so you know, Apple sends out an email whenever someone adds or changes a rescue email address associated with an existing Apple ID. If you received this email in error, don’t worry. It’s likely someone just mistyped their own email address when creating a new Apple ID.
If you have questions or need help, visit the Apple ID Support site.
Thanks again,
Apple Support

In that case, someone is trying to hi-jack your Apple ID.
You should change your password immediately.

New iPad user; confused after apple ID change of password and email address. New details NOT recognised by iCloud and actual iPad? Help! Thank you

I'm new to my iPad & Apple!
I have updated/ changed details within my Apple ID; email, contact details and changed password.
This has worked & recognised when using updated password for use with Apple's web site (e.g. Able to login to this site) & all other apps with the EXCEPTION of iCloud and also my actual iPad ("internal/own" software/OS I would presume?!).
Shortly after turning my iPad on, the Apple ID request pops up showing my old email address. I have tried entering old & new passwords which both fail. I now cancel this request and continue ok.
This also happens with iCloud: as just mentioned, the request for Apple ID comes up with old email address and neither old or new passwords are accepted (& therefore I can not back-up to iCloud).
Can anyone help please?
With anticipated appreciation and thanks,
NJohnR
(Maybe I should mention that while I live in the UK; Scotland, I am currently on holiday in France while I have made further changes to my ID password, though was at home when made initial changes).

I have resolved this problem!
I try &change my email details within my iPad's iCloud settings. Though the primary (old) email could not be changed.
So I took advice from further searches here & on the iCloud site & went ahead and deleted my iCloud account. Success! Immediately after deleting the account I had a request to open & login to a new iCloud account with my new Apple ID login details already there (showing my new email address & requesting my password- all which worked fine). Also I have not lost any files.
I hope that this may help someone else in the future.
Happy Appleing all

How to ensure security of password on providing login details to Discoverer

I have a webapp that uses Javascript to POST login details to directly connect to Oracle discoverer over HTTPS. How can I ensure that the password passed will be safe and not accessible?

Hello
My recommendation would be to address this to Oracle Support using a Service Request. Encryption, HTTPS and POST scripts can be tricky at the best of times.
Best wishes
Michael

Group Policy to clear down MRU lists and to clear or to prevent user login details for programs such as Remote Desktop from being recorded

Hi there,
Please can anyone instruct me on how to set up Group Policy to clear down MRU lists and to clear or to prevent user login details for programs such as Remote Desktop from being recorded. Your help would be much appreciated.
Kind regards,
RocknRollTim
P.S. I was redirected by a forum user off the Microsoft Community forum.

Hi RocknRollTim,
Agree with Jason. Using a script will be a better option.
Just addition, for history of RDP Connections, please open Registry Editor and follow the path:
HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default. Please check if find MRU registry items where the name (or the IP address) of the terminal server is kept in.
Please also follow the path: HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Servers. It contains
the list of all RDC (remote desktop client) connections that have ever been established from this computer.
When expand Server folder and select a node, you will see the UsernameHint key that show the name of the user connected by rdp.
Please back up registry items to avoid unexpected issues before any operation.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Thank you for responding back Justin Gu and I agree with both you and Jason Miller that a script can easily achieve this task. Thank you all for your help.
Many thanks,
RocknRollTim

Create a supplier - How to get login details

Hi,
I need to create a test supplier in E-sourcing system.Can someone explain the steps to create supplier in E-sourcing.
Also after creating the vendor in the system,how do I get the login details for that vendor user?Does system send a notificatione mail ?
Thanks .

Hi
Please go to Tab Supplier Management -> Create Supplier
Create a Primary contact for that supplier
While creating select if you want to create a Preliminary or a Purchasing hold or Approved supplier
There is a tab called security, here you assign the role to the supplier and there is a check box called send notification
The System will send a mail to the supplier contact email ID that you have maintained in the email address for this supplier.
Incase you are doing it on your test system for an SMTP, check that mailbox.
If this is for realtime, then the vendor will get the email with the URL. Username and Password
Regards
Tridip

To get login details of portal into webdynpro application

Hi All,
How to get the portal login details(user name) into my webdynpro application.
Thank you,
Harsha P.

Hi,
If you want to have portal login details from backend system (with ABAP) you should ask this question in some portal forum and ask if it is possible. This has nothing to do with workflow or UWL. Even if you get the portal user ID to the backend system, then what? Do you want to manipulate the portal roles etc. from your ABAP WD application? Then you will have even more complicated requirements to achieve with ABAP. It is not that straightforward to call different portal functionalities from backend system. You might need to do some "portal development". And eventually your ABAP WD application might come just an unnecessary wrapper component for calling some web services or whatever in portal.
Regards,
Karri

While send/receive email, I have received an error message "Sending of password d"? However with same login details, I am able to login with other application.

While send/receive email, I have received an error message "Sending of password d"?
However with same login details, I am able to login with other application.
I have changed password still the issue remains as it is.

https://support.mozilla.org/en-US/kb/cannot-send-messages

I cannot upload photos from iPhoto 9 to Flikr. When I attempt to do so, I get the message "the login details or auth token passed were invalid." Please help.

I cannot upload photos from iPhoto 9 to Flikr. When I try, I get the message "the login details or auth token passed were invalid." I am using iPhoto 9 version 8.1.2, and my OS is 10.9.5. My computer is a MacBook Pro. I do not have this trouble with my iMac. This trouble started before I updated to OS10.9.5. I do not have this problem when uploading to FaceBook or sending by e-mail.
This problem started when I tried to upload some photos after hitting the "use other account" tab. This took me to a Flikr site asking me for permission to make my iPhoto information available to others. I clicked "yes," and then I changed my mind and clicked "no." I haven't been able to upload to Flikr since.
I searched Flikr and Yahoo for a solution, and Yahoo says the trouble is in iPhoto. I checked my Flikr account, and iPhoto extensions are enabled.
I need to upload some school and alumni photos, so I sure could use some help. I am Not computer proficient. Thank you.

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Purchase order wise payment details

Hi ,
Requirement : Report for Purcahse order wise payment details
Is there any report , where we can see purchase order wise payment details

Hi,
Better u go with z report, i checked there is no std tcodes/reports for ur req.. and chek the blw link for query
/people/tao.zhang/blog/2009/04/07/magical-function-2-of-sap-query
Edited by: Jayakumar Raju A.S on Jul 6, 2009 7:03 AM

Asking for login details jumping from BW to SS report at Portal site

Hi Guys
Our BW reports are avilable from protal for user's.
Now the issue we are facing is when we jump from BW report to source system(SRM) report, it is aksing for login details for source system. where as at portal site it should not ask for login deatils. And we are facing this issue only in QA system and not PRD system.
M not sure where things are going wrong. I have checked SSO. nothing seems to be wrong here also.
Thanks & Regards,
Rohini

Hi Rohini,
I may not be correct. But does the user id which you are using (both in QA & Prod) have same settings for User-Type (<i>SU01 -> Logon Data -> User Type</i>). ?
Also u can check the RFC Settings (SM59).
Hope it would help..
Regards,
Vikrant.

How do i get my imac to remember my login details on my email and Facebook without remembering my passwords?? iAt the moment i have to type each time i visit my sites??

How do i get my imac to remember my login details on my email and Facebook without remembering my passwords?? iAt the moment i have to type each time i visit my sites??

Open Applications and the the Utility folder and then Keychain Access app. In there you will find all the usernames and password that have been saved. For some reason it is not saving those passwords and or not using the ones that have been saved.
This is fairly common with Mac OS X as it happens for no apparent reason just all of a sudden.

How do I change my telstra bigpond cable login details on my airport extreme base station?

I have reason to believe my password has been compromised so have changed my account details with my ISP but now I need to change the password on my home network.
I have connected to the (n) airport extreme (which is connected to my cable modem) but cannot find any way to see or alter the login details - in fact, I don't even know how the cable modem knows to connect to my cable account.
(If my account is being compromised I wonder if the leech is able to maintain connection to my account just as I am. I can't rermember the last time I needed to type my username and password for my bigpond account...)

Does your ISP require PPPoE in order to authenticate you before accessing their Internet service? PPPoE is a means to transmit your credentials (username & password).
If so, then you would enter your credentials on the PPPoE tab within the AirPort Utility. ref: AirPort Utility > Select the AirPort > Manual Setup > Internet > Connect Using: PPPoE

How do i delete the icloud account on my iphone without login details

How do i delete the icloud account on my iphone without login details or access to the email account which it was set up with?

While you can delete the existing iCloud account by forcing the phone into recovery mode & restoring it, or logging into iCloud.com & erasing the phone, you won't be able to activate the phone unless you you know the original Apple ID/Password that was originally used to activate the phone. The phone will be useless.
This is called Activation Lock.

Update Address and communication Details of BP

Hi,
Requirement is we need to update address and communication details of BP, please let us know relative BAPI for the same. Below roles has to be updated with given address and communication details,
General Role
Employee Role
Help full information will be appreciated..

Hi,
For updation of address you can use
BAPI_BUPA_ADDRESS_CHANGE.
I guess you cannot update a role . You can only add new roles with BAPI_BUPA_ROLE_ADD .
One more thing in address updation, Whatever fields are there in import parameter ( Address) you can update them even if they are not present in database.
But in case of Tables( Communication details) fields you can only update if the values are existing in database.
Reward if helpful.
Regards
Sourabh

IP address wise login detail

Similar Messages

Maybe you are looking for