IP Admin Problem

I am unable to install my printer on my MacBook 10.5.8
I have pasted into the Terminal:
dseditgroup -o edit -p -a admin -t group _lpadmin
I then press enter and it asks for my password, but when I type it in nothing happens, nothing types.
How do I enter my password if I cant type it in please?
I have searched this forum and I cant find anyone else with the password input problem
Hope someone can help
Thanks

Keep typing it in. It's not supposed to display anything onscreen when entering it in the Teminal.
(91739)

Similar Messages

  • Help with Admin Problems

    Ok so I have been blessed with the most unlucky of situations anybody could Imagine. My Dilemma is that I now have a new Macbook Pro running Mavericks 10.9.4 as my old one is many, many years old. Now the problem is that I need to unlock the gold padlock on the old computer running 10.5.8 but there is no admin account? All of the users say standard and I thought I had used to be the admin but now its gone. So I looked up ways of fixing the problem including one specific one: Restart computer, Hold command+s, type: "mount -uw /" then: "rm /var/db/.AppleSetupDone" then: "reboot" and had gone through all the settings and set up a new account but the account it made is still only a standard and not an Admin account! And since I still don't have an admin I cannot even delete the new standard account. My poor old Mac is running out of memory and disk room. Any ideas on anything I can do as I no longer remember where the startup discs were put, cannot gain access to any admin privileges, can not unlock anything I need to get to, and have not tried an Apple store yet as I heard they will not do it for you. Anybody have suggestions as I can't get any of my important files off my old mac or even activate our time machine cause it requires the admin info as well

    The first user on Mac is also has administrator rights, so use your password for the account.

  • ARD Admin problem

    I'm running ARD 3.4 in a school with 26 iMacs from early 2006 in a lab. Everything was working fine until I had to replace two machines due to hardware failure. I replaced them with the same model computer, restored them from the same image that the rest used, and called it good. I administer ARD from another iMac, early 2008 20" in the building. I went to install some software and found the two I had replaced not working, call them #1 and #3. I removed them from my list, ran the scanner, and found the machines were simply using different IP addresses, so I re-added them to my list. ARD works as usual for all the machines except 1 & 3, listing them as offline, but I am still able to control them (any other tasks fail because the computers are "offline"). I've gone through every setting, both on the machines, and in ARD and the only difference I can find is that ARD reports 1 & 3 as being administered by a computer with a different IP address than the others - I've pinged this IP address and gotten no response. The working computers also have a green light next to the admin machine name, while 1 & 3 do not. I click the edit button at the bottom of this page, but it doesn't actually let me edit anything, regardless of which computer I'm checking.
    Has anyone else run into this problem? Any suggestions?

    Hi jhana,
    I've been combing the boards because I too am having this very same kind of thing happen.
    In my case, I moved and have been attempting to recreate the office I had back in AUG 2010. Started setting it all up in January and was delayed due to a lot of hardware failures. Am finally getting around to setting up ARD and my computers are not working with ARD as they did in the past. Many are showing up as Offline. I decided to throw away the prefs and thought it would give me a fresh start, but now many computers on the network are not even showing up!
    Misery loves company, but I sure would like to solve this and get happy.
    Suggestions anyone?
    ARD 3.4 Administered from an iMac PowerPC G5, and the Ethernet & Airport network has 3 more iMacs, a MacMini, and two PowerMacs, and a PowerBook G5, and sometimes an iBook. Things were working great before I moved. Network is configured a bit differently that before, but since I set it up, file sharing seemed to be working OK, so then went I went to set up ARD 3.4 things are not right.
    Why?
    Thanks in advance and so long for now, TOM

  • Server Admin Problem - File Sharing fails to load

    We recently switched over from a 10.4 server to an Intel Quad Core Xserve running 10.5.8. Things seemed to be working for about a week but now The File Sharing part of Server Admin fails to load. After spinning for a few minutes I get a kNetworkError on the File Sharing Service.
    I'm not totally through setting up all the share points so this is causing quite a problem. Otherwise the Sharepoints that are set up are working properly. The first time this happened a server restart cleared the problem. This time nothing seems to help.
    Anyone have a cure for this?

    The problem seems to be getting worse. Once the error occurs some of the other services are not available through SA either. Anybody have any suggestions, or is it a reformat and reinstall situation?

  • Delegated Admin - Problem

    I just installed the SC 6 Update 2 all component in the same server....when i try to create a user with delegate admin i have the following error
    /opt/sun/comms/da/bin/commadmin -v user create -D admin -n domain.com -l username -d domain.com -w password -S mail,cal -H servername.domain.com
    FAIL
    *5088:Error message required. missing resource string -> norgsmd null*
    the only way to make work is if I remove the " -S mail,cal". I enable mail & cal to be use with convergence, the object exist in the LDAP because the admin user that was created with the installation has all the objectsclass needed for calendar and mail, so if I login into convergence I see the calendar and email folders...
    and then a I run the command /opt/sun/comm/im/sbin/imadmin assign_services to assign the services to all users in a specific domain and it executes without problem but without changes...the users still have the same objectclass
    the complete output of the command is :
    bash-3.00# /opt/sun/comms/da/bin/commadmin -v user create -D admin -n domain.com -l username -d domain.com -w 12345 -S mail,cal
    [Debug]: DBG:Object = user ; task = create
    [Debug]: default domain from Properties: domain.com
    [Debug]: IShost from Properties: mail.domain.com
    [Debug]: ISPort from Properties: 80
    [Debug]: Contacting : http://mail.domain.com:80/commcli/auth
    [Debug]: To servlet: domain=domain.com&username=admin&password=12345&charsetenc=UTF-8
    [Debug]: cookie => JSESSIONID=6777b671e5fb7eee49f1851ec1a3; Path=/commcli
    [Debug]: RECV: OK
    [Debug]: RECV: OK
    [Debug]: RECV: dn: uid=admin, ou=People, o=domain.com,dc=domain,dc=com
    [Debug]: RECV: nsroledn: cn=Top-level Admin Role,dc=domain,dc=com
    [Debug]: RECV:
    [Debug]: DBG: before getobjtaskargs
    [Debug]: In getObjTaskArgs for: user; create
    [Debug]: Contacting : http://mail.domain.com:80/commcli/climap
    [Debug]: Sending to servlet: task=create&object=user
    [Debug]: getObjTaskArgs Status: 0
    [Debug]: Number of servlets: 1
    [Debug]: Servlet Name: TaskManager
    [Debug]: Servlet args: task=CreateUser
    [Debug]: Servlet args: objecttype=User
    [Debug]: Valid Options Array: 8
    d, true, , false, true, user's domain, domain, ,
    l, true, , true, true, user's login ID, add_uid, ,
    F, true, , true, true, user's first name, add_givenname, ,
    L, true, , true, true, user's last name, add_sn, ,
    I, true, , false, true, user's middle initial, add_initials, ,
    W, true, , true, true, user's password, add_userpassword+confirm_userpassword, ,
    S, true, , false, true, service(s) to be added , add_services, mail={H;true;#;false;true;user's mail host;add_mailhost;#},{E;true;#;false;true;user's email address;add_mail;#}::cal={E;true;#;false;true;user's email address;add_mail;#},{B;true;#;false;true;user's back end calendar server;add_icsdwphost;#},{J;true;#;false;true;first day of the week;add_icsfirstday;#},{T;true;#;false;true;user's timezone;add_icstimezone;#},{k;true;#;false;true;calendar version - legacy or hosted domain;cal_version;#},
    A, true, , false, true, attribute to add, <attr name>:<value>, add_, ,
    [Debug]: DBG: getObjTaskArgs done
    [Debug]: servInfo len = 1
    Enter user's password: 123456789
    [Debug]: argVal =domain.com
    [Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com
    [Debug]: argVal =username
    [Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username
    [Debug]: argVal =test
    [Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test
    [Debug]: argVal =test
    [Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test&add_sn=test
    [Debug]: argVal =123456789
    [Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test&add_sn=test&add_userpassword=123456789
    [Debug]: argVal =123456789
    [Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test&add_sn=test&add_userpassword=123456789&confirm_userpassword=123456789
    [Debug]: argVal =mail
    [Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test&add_sn=test&add_userpassword=123456789&confirm_userpassword=123456789&add_services=mail
    [Debug]: argVal =cal
    [Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test&add_sn=test&add_userpassword=123456789&confirm_userpassword=123456789&add_services=mail&add_services=cal
    [Debug]: Contacting : http://mail.domain.com:80/commcli/TaskManager
    [Debug]: To servlet: task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test&add_sn=test&add_userpassword=123456789&confirm_userpassword=123456789&add_services=mail&add_services=cal
    [Debug]: RECV: FAIL
    *[Debug]: RECV: 5088:Error message required. missing resource string -> norgsmd null*
    [Debug]: CLITask: status returned =FAIL
    FAIL
    *5088:Error message required. missing resource string -> norgsmd null*
    [Debug]: DBG: doOne returned code=6
    [Debug]: Contacting : http://mail.domain.com:80/commcli/logout
    [Debug]: Logout ...
    any help will much appreciated
    CA

    KenGra wrote:
    I found the problem, the default domain that was created during the installation did not have all the objectclass needed, such as calendaruser etc....Did you remember to run the "./commadmin domain modify -S mail -S cal -H mailhost" for the default domain after the installation of Delegated Administrator?
    Regards,
    Shane.

  • Shares-admin problem

    I have a problem with shares-admin application on Gnome. I've been install Samba through wiki (http://wiki.archlinux.org/index.php/Samba), and install gnome-system-tools and nautilus-share package for easy share of my files. But Add and Unblock buttons of shares-admin don't be able to press. And on nautilus-share, "Share through" is disable to me.
    Any ideas about this issue? Thanks in advance.
    Last edited by alessandro_ufms (2008-11-17 14:31:32)

    Have you found a solution to this? Or has anyone else got any idea of what might be causing this?
    I'm having the exact same problem. Shares-admin doesn't allow me to do anything (not even change the workgroup name) except for removing shared folders.
    I can share folders with no problems by editing the smb.conf file (and other computer are able to access them - so samba is working), but I can't do it from nautilus nor can I view the shared folders of other computers.
    It seems like this user has no access to samba... do I need to add this user to any group (it didn't use to be like this)?
    I know it used to work some time ago, but since I rarely share new folders I can't tell what update caused it to stop working.

  • Admin problem with WRT54G

    I am logging into my WRT54G to try to upgrade my firmware. The problem is that when I log in, I get a error on the page and it will not bring up any of the links or icons that I would use to go to Administration or check my wireless or anything. Does anyone even know where to start with this? I am using XP Pro and IE6 SP2.
    Any ideas?
    Thanks,
    Derek

    If you are getting a 401 error, the router most likely did not accept your user name and password.  The defaults are:  user name is left blank, and password is "admin"  (with no quotes).  If you changed these, then you will need to enter whatever you changed them to.  If you cannot remember what you set them to, then the only other option is to reset the router to factory defaults.  This will reset the user name and password to the values noted above.
    Sometimes this problem is caused by communication errors between the computer and router.  To correct this, do the following:
    Use Internet Explorer, it usually works.
    JavaScript must be enabled.
    Use a computer that is wired to the router.
    In the non-working computer, temporarily turn off your software firewall. Note that some Zone Alarm users have had to uninstall the firewall to get it turned off.
    If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
    A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.

  • Admin problem activating Firevault in User a/c

    Have activated FireVault in my Admin a/c & in one user a/c, no problems. However in the last a/c  , my partners its refusing to acknowledge my admin password which is valid. There's is plenty of HD space available. Any Suggestons? There's is nothing (data,photos) much in the a/c so one option is thrash it & create a new one but before I do this I just wanted to see if there's is a reason why this is happening.
    Thanks

    Hello LT
    apologies for the late reply but tried earlier via by 5S but was unable to post a reply.
    Your last Q got me thinking as when I looked at the profile last night before initiating thread the user had admin rights which I then removed, no problem. When I returned home a little while ago tonight I tried to activate FireVault using her user name & password = no luck. I tried again with admin rights = no luck. Finally I tried again using admin password but this time I changed the case of the first letter & yes it worked. Seems strange but you may have an answer. In the other two profiles I had no issue & even now re. logging in & making other admin changes the lower case version of the password works.
    We had a break-in 2 days ago & we were v fortunate. He had the iMac removed but was interrupted. Hence my FireVault activation.
    Thanks for your help. Hope this is of help to the third party who is experiencing the same problem.
    Kind regards,
    Dino.

  • From schema 1 to schema 2 migration delegated admin problem

    I want migrate from schema 1 to schema 2 the messaging server 6.2 ( jes 2005q1).
    I have install access manager and delegated admin.
    With the commdirmig I migrate the domain and schema , the messaging work correctly.
    I have a problem with the delegated admin web interface.
    The delegated don't view my domain. If I add the sundelegatedorganization objectclass I can view my domain on delegated admin but I can view user and group.
    Any Idea?
    TIA
    Bye Giovanni

    There are two very different products called "deletaged admin". The old iPlanet Delegated Admin (iDA) only works with Schema 1. The current Delegated Admin, that comes with JES3 only works with Schema 2.
    If you're using the old iDA that worked with schema 1, it won't work with schema 2. You have to install the new DA for that.
    It doesn't work with groups/lists, only with users and domains.

  • Flash Player 10 causing a Google Analytics Admin Problem

    Since I upgraded to Flash Play 10, inside the admin of Google Analytics is not working.  When I log in to Google Analytics, Flash Play 10 is a part of adjusting the dates and it is causing some type of error that I can't figure out.  All I want to do is be able to adjust dates within Google Analytics and I can't.
    It happens in the three different browsers FireFox, IE and Chrome.  I have tried uninstalling and reinstalling an older version but it still isn't working.
    The reason I believe it is the flash play is because when I open the date section in Analytics I can right click and it give me the option of 'About Adobe Flash Player" and shortly after updating I opened analytics and my browser crashed.
    I am going to uninstall my browsers to see if that will work but if anyone else has had this problem and solved it please help me out.
    Thanks

    Hi, Thanks for the feedback. Yes that does help in many cases. Sometimes updating the device drivers also.
    The hardware acceleration sometimes can't be used by every system. You can read about the system requirements and what and how it works here:
    http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html
    Regards,
    eidnolb

  • OSX 10.4.7 Workgroup Admin problem from remote computer

    I've set up for test a 10.4 server on a private network.
    On this server, I've created with Workgroup Admin some accounts for files, mail and web. I've no problem to access nd modify these accounts with the tools installe on the server, but when I try to do the same thing from a remote Workgroup Admin, I've an empty list for users and group, except the admin user.
    The fact is that i've changed the DNS setup from a dyndns account to a classical dns entry.
    Is there any correlation between the DNS changement entry and the fact that I cannot retreive my users entries in Workgroup and how restore a normal usage.
    Thanks for help !

    Are you looking in the correct domain from the remote machine?
    You may just be looking in the local netinfo domain of the server, and you need to be looking in the OD domain.
    Open WorkGroup Manager and in the top left under the 'Admin' globe you will see another small globe. Click on this and use th pulldown menu to check you are looking at the /LDAPv3/127.0.0.1 domain.
    hth,
    b.

  • WebLogic 8.1 Portal Admin problem !

    Hello,
    I use the web-based portal admin to create a portal with some deployed portlets.
    My problem is that the URL is very long (http://localhost/portal/appmanager/dse/desktop1?...) and can I create a portal with the URL like (http://localhost/dse/desktop1?....)
    Eric

    Address 7001 does't seem to be good idea for debuging, it is weblogic default address.
    try 3999.
    "Arsel" <[email protected]> wrote:
    >
    Hi There,
    I started weblogic server 8.1 with the follwing option -Xdebug -Xnoagent
    -Djava.compiler=NONE
    -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=7001
    Weblogic started successfully but when I tried to attached the java process
    from
    my IDE I got the error 'Target server failed to handshake' and in the
    weblogic
    console I got the following error.
    <22-Aug-2003 10:09:52 o'clock AM EDT> <Error> <HTTP> <BEA-101083> <Connection
    failure.
    java.io.IOException: A complete message could not be read on socket:
    'weblogic.servlet.internal.MuxableSocketHTTP@1871db
    1 - idle timeout: '60000' ms, socket timeout: '5000' ms', in the configured
    timeout
    period of '60' secs
    at weblogic.socket.SocketMuxer$TimeoutTrigger.trigger(SocketMuxer.java:734)
    at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:97)
    at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
    at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
    at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:49)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151)
    Does weblogic 8.1 support JPDA? Any suggesstion is higly appreciated.
    Thanks.
    Arsel

  • When will the Non-Admin problem be fixed?????

    When will the problem of non-admin accounts not able to see all flash content on
    web pages be addressed???

    in addition to poor open GL performance, i've also had problems with any program utilizing antialiasing support. i recently sat down and called apple and had a discussion with their support line. while i didn't mention the poor open GL performance, i did mention the graphical errors i was experiencing with my MBP. i was told these issues are not normal, and have a replacment on the way. while these issues are some what numerous, i've not been able to find much more than a few articles or discussions on the topic. i'm hoping this means it is contained to a few MBPs and not all. we'll see when the replacment comes. if not, however, i'd consider a class action suit. the machine i bought was sold as a portable gaming machine, (apple.com/games/hardware) and thats not what i've gotten. i am very disappointed that apple has not even acknowledged the issue to let us know some fix is in the works. if enough of us make a big enough noise about it, perhaps we can get some sort of reply. i'd recommend you sending a note to apple as mentioned, then take some time to sit and give apple a call. they are very interested in listening to you, don't feel silly about calling about game perfromance, they are advertising these machines as such.
    cheers

  • Another standard to admin problem.... Help!

    For some reason my account is now a standard account and I can't figure out how to change it to an admin. Yes, I tried doing Apple's article; I put the install DVD in and hit restart. Upon restart I pressed and hold the "C" or "Option" key, but my computer just shuts down whenever I do it (At the grey screen with the Apple logo...). Pls help!

    Nevermind ^^
    It magically worked on the last try instead of shutting itself down randomly. Hmm... perhaps my iMac's problem is randomly shutting down during installations such as Bootcamp and stuff(I gave up trying to find out why it would shut down during windows shut down). Meh, thanks anyways

  • System Admin and Admin Problem...

    Can any one tells me the different between system admin and admin?
    It seems like system admin is messing up my file permissions, and it seems like system admin has more control than the admin (me)...
    I had this experience today: everytime when I create a folder, the permission's gone under "system", I was not able to have any folder action nor create a new folder under it.
    I search the forum with solutions and I think I've fixed it and it works fine now, but the permission is still not under my account name; it goes under "root" (system Admin).
    Any one has a solution for this?
    And how can I delete the system admin account?
    Thanks,
    Arnold

    I input dscacheutil -q user in terminal, and I got this:
    Would it help to solve my problem? :P I'm wondering if anyone has the same problem too?
    name: _amavisd
    password: *
    uid: 83
    gid: 83
    dir: /var/virusmails
    shell: /bin/tcsh
    gecos: Amavisd User
    name: _appowner
    password: *
    uid: 87
    gid: 87
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Application Owner
    name: _appserver
    password: *
    uid: 79
    gid: 79
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Application Server
    name: _ard
    password: *
    uid: 67
    gid: 67
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Apple Remote Desktop
    name: _atsserver
    password: *
    uid: 97
    gid: 97
    dir: /var/empty
    shell: /usr/bin/false
    gecos: ATS Server
    name: _calendar
    password: *
    uid: 93
    gid: 93
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Calendar
    name: _clamav
    password: *
    uid: 82
    gid: 82
    dir: /var/virusmails
    shell: /bin/tcsh
    gecos: Clamav User
    name: _cvs
    password: *
    uid: 72
    gid: 72
    dir: /var/empty
    shell: /usr/bin/false
    gecos: CVS Server
    name: _cyrus
    password: *
    uid: 77
    gid: 6
    dir: /var/imap
    shell: /usr/bin/false
    gecos: Cyrus IMAP User
    name: _devdocs
    password: *
    uid: 59
    gid: 59
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Developer Documentation
    name: _eppc
    password: *
    uid: 71
    gid: 71
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Apple Events User
    name: _installer
    password: *
    uid: 96
    gid: -2
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Installer
    name: _jabber
    password: *
    uid: 84
    gid: 84
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Jabber User
    name: _lp
    password: *
    uid: 26
    gid: 26
    dir: /var/spool/cups
    shell: /usr/bin/false
    gecos: Printing Services
    name: _mailman
    password: *
    uid: 78
    gid: 78
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Mailman user
    name: _mcxalr
    password: *
    uid: 54
    gid: 54
    dir: /var/empty
    shell: /usr/bin/false
    gecos: MCX AppLaunch
    name: _mdnsresponder
    password: *
    uid: 65
    gid: 65
    dir: /var/empty
    shell: /usr/bin/false
    gecos: mDNSResponder
    name: _mysql
    password: *
    uid: 74
    gid: 74
    dir: /var/empty
    shell: /usr/bin/false
    gecos: MySQL Server
    name: _pcastagent
    password: *
    uid: 55
    gid: 55
    dir: /var/pcast/agent
    shell: /usr/bin/false
    gecos: Podcast Producer Agent
    name: _pcastserver
    password: *
    uid: 56
    gid: 56
    dir: /var/pcast/server
    shell: /usr/bin/false
    gecos: Podcast Producer Server
    name: _postfix
    password: *
    uid: 27
    gid: 27
    dir: /var/spool/postfix
    shell: /usr/bin/false
    gecos: Postfix User
    name: _qtss
    password: *
    uid: 76
    gid: 76
    dir: /var/empty
    shell: /usr/bin/false
    gecos: QuickTime Streaming Server
    name: _sandbox
    password: *
    uid: 60
    gid: 60
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Seatbelt
    name: _securityagent
    password: *
    uid: 92
    gid: 92
    dir: /var/empty
    shell: /usr/bin/false
    gecos: SecurityAgent
    name: _serialnumberd
    password: *
    uid: 58
    gid: 58
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Serial Number Daemon
    name: _spotlight
    password: *
    uid: 89
    gid: 89
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Spotlight
    name: _sshd
    password: *
    uid: 75
    gid: 75
    dir: /var/empty
    shell: /usr/bin/false
    gecos: sshd Privilege separation
    name: _svn
    password: *
    uid: 73
    gid: 73
    dir: /var/empty
    shell: /usr/bin/false
    gecos: SVN Server
    name: _teamsserver
    password: *
    uid: 94
    gid: 94
    dir: /var/teamsserver
    shell: /usr/bin/false
    gecos: TeamsServer
    name: _tokend
    password: *
    uid: 91
    gid: 91
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Token Daemon
    name: _unknown
    password: *
    uid: 99
    gid: 99
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Unknown User
    name: updatesharing
    password: *
    uid: 95
    gid: -2
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Update Sharing
    name: _uucp
    password: *
    uid: 4
    gid: 4
    dir: /var/spool/uucp
    shell: /usr/sbin/uucico
    gecos: Unix to Unix Copy Protocol
    name: _windowserver
    password: *
    uid: 88
    gid: 88
    dir: /var/empty
    shell: /usr/bin/false
    gecos: WindowServer
    name: _www
    password: *
    uid: 70
    gid: 70
    dir: /Library/WebServer
    shell: /usr/bin/false
    gecos: World Wide Web Server
    name: _xgridagent
    password: *
    uid: 86
    gid: 86
    dir: /var/xgrid/agent
    shell: /usr/bin/false
    gecos: Xgrid Agent
    name: _xgridcontroller
    password: *
    uid: 85
    gid: 85
    dir: /var/xgrid/controller
    shell: /usr/bin/false
    gecos: Xgrid Controller
    name: chowmein
    password: ******
    uid: 501
    gid: 501
    dir: /Users/chowmein
    shell: /bin/bash
    gecos: Arnold Chow
    name: daemon
    password: *
    uid: 1
    gid: 1
    dir: /var/root
    shell: /usr/bin/false
    gecos: System Services
    name: nobody
    password: *
    uid: -2
    gid: -2
    dir: /var/empty
    shell: /usr/bin/false
    gecos: Unprivileged User
    name: root
    password: ******
    uid: 0
    gid: 0
    dir: /var/root
    shell: /bin/sh
    gecos: System Administrator

Maybe you are looking for