Ip adress not recognized in windows explorer when trying to transfer data from my PC to my TC via ethernet.

Hello,
I currently have a Time capsule and a Pc with a Windows 7 operating system. Im trying to transfer data from my PC to my Time Capsule via ethernet cable because wirelessly takes too much time given that I have a lot of data to transfer. In my Airport Utility I already set my workgroup to "WORKGROUP" and the file sharing to "write and read", I also disconnected the Wifi on my Pc so the ethernet would work without confusions. But when I type my Time Capsule's Ip address in my windows Explorer it opens a page that says something like "this website is not available". Maybe I did something wrong while setting up the time capsule for file sharing. What are the correct steps for me to be able to transfer data from my PC to my time capsule via ethernet cable?

I do not normally use a PC, but we have a guest here this week with a PC using Windows 7 which allows for some "testing" on the network.
What is the Ethernet connected IP address of the Time Capsule? Mine is 10.0.1.2
If we open Windows Explorer and type in
\\10.0.1.2
the Time Capsule drive is immediately seen on the PC once I enter the device password for the TC to connect.
I can also type in the name of the Time Capsule and things work the same way. My Time Capsule name is TC
\\TC
brings up the same log in as the IP address method above
We have not tried mapping the drive, but might. Will post on results if we do that.

Similar Messages

IPod Touch not recognized by Windows Explorer.

My iPod Touch is shown in iTunes' list of devices but is not recognized by Windows Explorer. Another possibly consequential symptom is that iTunes will not start when the device is connected to the computer. Any help appreciated.
Windows 7 Pro, IE9, have verified latest version of iTunes.

If your iPod is recognized by iTunes (and by your photo app as a camera), then that's how it should be. To startup iTunes when the iPod is connected, check the appropriate option on the iPod's Summary page in iTunes.

2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad2

2nd Gen ATV I can hear but not see on the TV when trying to stream TV from the iPad2

You can look at the ipad under settings, general, about and see if it's 4.3.3.
Or when you connect the ipad to the computer with itunes, it'll tell you on the first tab if you need an update.

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Itunes closes when trying to transfer purchases from ipod or iphone

Using a PC with Vista. Installed iOS 5 this morning. Cannot update either ipod touch 3g or iphone 3g with software update until "prior purchases are transferred to itune" - unfortunately every time I try to "transfer the prior purchases" Itunes closes completely. I've been working on this for hours now. Anyone got any ideas how to get around this?
Thanks.

Your Post is a bit confusing
Tinfrbs wrote:
displays that the ipod cannot be written on or to.. when trying to transfer purchases from ipod to computer...
If you are using iTunes, you cant transfer purchases in the iPod to the Mac, you need 3rd Party Software.
Have a nice day!

Can we get an option to NOT automatically restart Windows explorer when CC updates?

Virtually every time CC updates, it restarts Windows Explorer, and while generally speaking, this is *slightly* better than restarting the computer, I still end up having to restart the computer because restarting explorer does not bring back some of my system tray tools that I actually use (Sound card manager, game controller manager and some others).
Can we get an option in preferences to turn the explorer restart off? It's super annoying and doesn't prevent me from having to restart the machine anyway.

I think we are getting a bit off track. There is nothing technically wrong with the installer. It isn't *directly* killing other processes, it's just a side effect of explorer going away. I'm guessing anything that starts from the startup folder when windows starts, doesn't necessarily restart when only explorer is restarted. 2 examples that I can think of off the top of my head are the profile editor for my Nostromo speedpad, and the control panel for my sound card. at least those two apps do not restart when explorer does. I use them frequently. When they disappear, I have to go hunting for them in the start menu. I realize these are very minor, but it's a side effect that is beyond the control of the CC updater, which is why the user should have control over when explorer is restarted, not the updater.

Iphone not recognized by windows explorer

I've read previous posts on this but no luck. I have never had a problem with this before. I'd plug my iphone 5 into my laptop, open Windows Explorer, then drag/drop files into my computer from my phone.
Then I purchased a Canon camera with wifi for my office. My IT guy tried to no avail to get the wifi to work. In the process, my Windows Explorer will no longer recognized either the Canon camera or my iphone. I am running out of space on my phone. I emailed myself all the videos I could so I could delete them but many photos and my larger videos are stuck on there.
My phone works great in itunes, I have no problems with my USB drives otherwise.
I've tried some fixes I've read about: stop/start Apple Device Service. I went to device manager and explanded the list as someone had suggested. They said to right click on "imaging devices" to then uninstall a driver but imaging devices was not in the list.
My IT guy says the drivers are gone and I need a new hard drive for my Dell laptop which I have to pay for.
This is very frustrating.
Please offer any assistance you can.
Thank you.

This article might help: http://support.apple.com/kb/TS1538
Start with step 3 - Verify that Apple Mobile Device Service Support is installed
Work through steps 4-6 is step 3 doesn't help.
~Lyssa

IPhone 5 not recognized in Windows Explorer, Advanced

Hi all,
My goal is to rescue the pictures that my phone is holding hostage. iTunes recognizes the phone and syncs correctly, I can see the device in Media Monkey and write to the device properly with that app. However, I cannot see the device in Windows Explorer on my Windows7 box. I do see the Apple device service running and have restarted and I do see the USB device driver is installed and operating properly. I have reinstalled iTunes. I do know there "were" photos on the iPhone..... The digitizer is not working and the screen does not work due to a drop in the pool so I can't verify or do anything on the phone. The phone receives calls, texts and the alarms, calendar reminders all work and the music is in memory so I see no reason that the photos would not still be on the phone but I cant get windows to see it.....
Any ideas??
Thanks

No, that should not happen. If all you did was a backup, or even a sync, the photos are not indexed as being imported. Many times I will decide not to import pictures on the phone if there are only a couple and I want them for some other reason. I will just close out the import utility and then sync the phone. I sync my phone daily, and if those pictures are still on the phone, then it will still start the import utility again the next time I connect the phone.
However, as a after thought, why not just try a screen shot, the content doesn't matter, then connect the phone and see if that will get it recognized.
Message was edited by: ChrisJ4203

Boot Camp: Seagate External Drive not Recognized in Windows Explorer -- PLEASE HELP!

I'm running in Boot Camp and using a Seagate Free Agent GoFlex external drive as both a Time Machine backup on the Mac OS, as well as a storage unit to exchange files. However, whenever I plug my external drive into my computer while running Windows, it does not show up in the Computer tab under "Devices With Removable Storage", like it should. It does show up on the "Safely Remove Hardware and Eject Media" button in the bottom right hand corner, and it appears as a "Startup Disk" in the Boot Camp Control Panel, so I know that it isn't a cable or USB input issue. Please help me get it to appear as a Device in the Windows Explorer. I need to exchange files from my Mac OS to my Windows OS. Thank you in advance for the help.

I did it but i could not install tool from the dvd. As i said, i can still boot up windows xp i just needs to re-install the service tool.
The drivers are working properly.

Card reader not recognized in Windows Explorer

My Dell XPS 8500 has an internal card reader. An inserted card was always recognized as soon as it was inserted. After installing Lightroom, the inserted card is no longer recognized by My Computer until after I start lightroom and begin the import process. I would prefer to copy my photos from the card to a chosen file on my hard drive without Lightroom's intervention. Is there a way to accomplish this?

Are you saying Windows Explorer doesn't show the card reader as a drive letter (E: or other letter), but LR does? Please take a screenshot of the LR Import screen and Windows Explorer screens as shown below. On my system the card reader appears as drive I: in both Windows Explorer and LR's Import module:

USB mouse not recognized in windows 8.1 - tried all no help

Hi,
I am having this issue for 2 weeks now. Plugging the muse to USB port didn't make any difference to system, it hasn't been seen at all (noting in dev manager, no beep etc). I was connecting same mouse using PS/2 adapter and worked well.
After doing UEFI bios update and installing latest drivers for motherboard mouse is shown in device manager as "Not Recognized" Code 43. I did try to use different USB mouse, same story, playing with drivers, deleting/uninstalling in Device Manager
didn't make any change. Deleted all USB devices/Hubs used generic drivers suggested by windows didn't change anything as well. Windows Troubleshooter see problem - but don't give options to fix it. System is up to date with windows updates, no new software
was installed. Changed as well Power settings regards to USB ports but no help
A lot of people suggest to go to UEFI Bios and changing USB settings of xHCI to disabled/enabled/auto - well none of this worked for me.
Anyone has any other clue which is worth to try?
Seen somewhere that locating USB port VID/PID (from dev manager) then Find it in Registry and edit "Power Settings" fix problem for some - can see VID/PID for this mouse in registry - but no editable settings there.
Thank you in advance
Marcin

Hello Marcin,
Can you use other devices normally like USB keyboard and USB driver?
If you can, please contact the manufacturer and check if there are hardware issues.
About the error code 43 in device manager, please take a look at the following KB.
http://support.microsoft.com/kb/310123/en-us
One of the drivers controlling the device notified the operating system that the device failed in some manner.
If you have already run the Troubleshooting Wizard, you might want to check the hardware documentation for more information about diagnosing the problem.
When you try the Windows troubleshooter, what problem do you see?
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Purchased ringtone iphone 4 that is not in my itunes library when i click transfer purchases from it appears in the tones library but in a paler shade of print with a dotted circle to the left of it when i take any action it disappears

have purchased ringtone on iphone 4 not in my itunes library when i click devices, transfer purchases from, it appears in tones in my library but in a paler shade of print with a dotted circle to the left of it, if i try to click on it or take any other action it disappears and leave a blank space i have tried this several time i want to transfer library to my new iphone 5 but i will loose the ringtone

I had the exact same issue!! Seriously p*ssed me off when I checked out my ITunes purchased items (via my computer) and noticed that most of the additional tracks listed on my IPhone playlist was listed there too. However, I never authorized any purchases!! (I have actually written Apple Support asking for a full refund of all tracks listed on my purchased list)
Be careful when you swipe your finger to the left/right on those "additional" tracks on your IPhone playlist... I'm pretty sure that the cloud symbol is an option to download or automatically buy those tracks.
Solution for the problem:
1 - go to your IPhone settings
2 - choose "iTunes & App Store"
3 - go to "Show All" & "Music"
4 - turn off "Music" by moving the bar to the left (it should be a white color once you turn it off)
Should solve your problem :~)

ClassNotFound Message when trying to deserialize data from an applet

Hi,
I have an applet that reads data from a web-server. The data was created by serializing a custom class (Test.java). The serialization format is not the standard one, but XML. This is reached by using the JSX-library (http://www.jsx2.com).
My HTML-file (Test.html) looks like that:
<html>
<applet width="400"
height="200"
     code="Test.class"
     codebase="./"
     archive="JSX2.0.9.4.jar">
</applet>
</html>
Both, the Test.class and JSX2.0.9.4.jar are stored in the same directory. The Applet reads the serialization data of "Test" instances and tries to deserialize them. But when started, the following error message appears:
Java VM version: 1.4.1_02
Java VM vendor: Sun Microsystems Inc.
java.lang.ClassNotFoundException: Test
at java.net.URLClassLoader$1.run(URLClassLoader.java:198)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at JSX.ObjectReader$Cache.getClass(ObjectReader.java:1503)
at JSX.ObjectReader$Cache.getClassCache(ObjectReader.java:1511)
at JSX.ObjectReader.object(ObjectReader.java:796)
at JSX.ObjectReader.readObject(ObjectReader.java:381)
at JSX.ObjectReader.readObjectOverride(ObjectReader.java:342)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:318)
at Test.read(Test.java:49)
at Test.start(Test.java:72)
at org.kde.kjas.server.KJASAppletStub$1.run(KJASAppletStub.java:102)
at java.lang.Thread.run(Thread.java:536)
When reading serialized data of classes included in the JRE, i.e. an ArrayList, everything works fine.
I think it is a kind of CLASSPATH problem, because "Test.class" can not be found although it is in the same directory as the Test.html file. So how can I fix this problem?
Thanks in advance
Markus

Make sure your 'CLASSPATH' contains '.'. However, it
should because you are compiling your applets fine.
Also try specifying a path to your class when
loading. If it's in a package, you have to specify
that, or include the class directory in your
CLASSPATH.Hey Devyn, it can't be a classpath problem. It's an applet; if run in the browser, there is no way to specify a classpath short of entering a jar in the archive parameter.
How are you deserializing the applet?

When trying to transfer purchases from iPhone 4s I get the following error message: "

When I try and transfer purchases from my iPhone I get the following error message:
"Attempting to copy to the disk 'DATA' failed. The device timed out."
I have recently moved my iTunes Media folder to my D:// drive and can still access music and tv shows etc.
Help would be much appreciated.

In the user tips tab of this forum, check out the following
Your first fcp troubleshooting step, deleting your preferences
and
Common FCP troubleshooting tips.

Error when trying to delete data from 0Plant

I am trying to delete the master data from 0Plant and get the following message:
The system is unable to delete all of the specified m
because some of it is still in use. (See log:
Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no lo
Is there a workaround? Thanks

Hi Niten,
You can delete the Master Data which are not used still. (As the SIDs are not mapped to the DIM Tables)
Then regarding the used ones ::: If you upload the Masterdata again with modifications, it will overwrite and after the attribute chage run you will see the modified Master Data.Hope this will solve your problem
regards
Happy Tony

Ip adress not recognized in windows explorer when trying to transfer data from my PC to my TC via ethernet.

Similar Messages

Maybe you are looking for